Stroj za valjanje navojev

E.W.Menn GW63

Stanje: novo, Leto izdelave: 2024, dolžina gredi pod glavo: 80 mm, dolžina navoja: 55 mm, največja hitrost vožnje: 480 mm/min, Flat Die Thread Rolling Machine E.W. MENN GW63 Fully refurbished to as-new condition. New guides, vibrator, and vibratory discharge system. New electrical system with inverter and PLC. Thread size: M8x80/55 mm. Iedpfx Ast Uucaebxsth Throughput: 480 pcs/min. Threading diameter (min./max.): 3 - 8 mm. Die length: 115/130 mm. Machine available for inspection and testing at HBR srl - Calolziocorte (LC).

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Progresivni stiskalnica SACMA SP260 5 matric – Kot nova – Popolnoma delujoča Na voljo za vsako preizkušnjo pri HBR srl. Popolnoma obnovljena Isdpewar Efefx Abxjth Tehnične informacije: Število matric: 5 Tlačna sila: 800 KN Največji premer reza pri 500N/mm²: 11,5 mm Največja dolžina reza: 85 mm Maksimalni izmetni hod na matrici: 65 mm Maksimalni izmetni hod na prebijalu: 20 mm Hitrost kosov na minuto: 275 Moč glavnega motorja: 30 kW Premer matric: 54 mm Dolžina matric: 90 mm Premer prebijal: 45 mm Neto teža: 11.300 kg Bruto teža: 13.000 kg Vabljeni v HBR srl v Calolziocorte (LC)

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Iedpst Hw N Tofx Abxjth Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Stanje: dober (rabljeno), Leto izdelave: 2007, Stroj je v zelo dobrem stanju. Postaja za nalaganje in razlaganje PROMOT ni vključena v obseg dobave. Na voljo je različno orodje/pribor za stroj. Tehnične podatke o stroju si lahko ogledate na zadnjih dveh slikah. Iedoxf Iamopfx Abxsth

Leto izdelave: 1988, stanje: dober (rabljeno), Carlo Salvi 1-stopenjski, 2-udarni stroj Model 780/SV Maksimalni premer odrezka (mm): 6,35 Maksimalna dolžina odrezka (mm): 97 Maksimalna dolžina izmeta (na strani matrice) (mm): 80 Itjdpshrdmxofx Abxjh Maksimalna hitrost (kosov/min): 360

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, dolžina gredi pod glavo: 30 mm, dolžina odseka (maks.): 52 mm, Double-action press Hilgeland CH1 KHA Itsdpfx Ajur N Dajbxsh Year of manufacture: 1970 The machine is immediately ready for operation!

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Itodpfxsuz If Ne Abxeh Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: rabljeno, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions (L x W x H): 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock device - Coolant tank with pump Isdouhb Uhspfx Abxjth - 2 boring wheels 80, diameter: 260 [mm]

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: ročni, delovna širina: 1.020 mm, nastavitev pregibne grede: 46 mm, Kot upogiba (maks.): 135 °, skupna masa: 340 kg, skupna dolžina: 1.350 mm, skupna širina: 850 mm, skupna višina: 1.175 mm, Oprema: dokumentacija / priročnik, Upper and lower blades in removable segments Including manual rear gauge PNEUMATIC CYLINDER!!! Max. bending capacity over the entire working length ----- 2.5 mm Max. working length ----- 1020 mm Itsdpfx Absga T A Dexsh Max. opening width ----- 46 mm Width of the fingers ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 275 mm Max. bending angle ----- 0 - 135° Weight ----- 340 KG Width ----- 1350 mm Depth ----- 850 mm Height ----- 1175 mm

Stanje: rabljeno, Leto izdelave: 1988, Technical details: Pressing force: 10 t Maximum workpiece diameter: 40 mm Thread length: 70–80 mm Workpiece diameter min/max: 3 / 40 mm Itsdpfx Aew D Aq Tjbxeh Rotational speed: 47–94 rpm Feed rate: 0.5 – 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions (W x D x H): 1.4 x 1.4 x 1.7 m Hydraulics dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Maximum thread diameter: 40 mm; Minimum thread diameter: 3 mm Up to max. pitch: 3.5 mm; Max. pitch: 1.75 mm Roll width min.: 80 mm; max.: 120 mm Spindle speed: 47–94 rpm Roller spindle diameter: 40 mm Various rollers as accessories