Valjanju Navojev nakup rabljenega (435)

Stanje: rabljeno, Stroj za valjanje navojev TLM RP8 TLM TORTONA Leto: 1995 Razpon premerov: 3–8 mm Dolžina osi pod glavo: 90 mm Rbjdjx Aqpropfx Ad Tet Maks. dolžina navoja: 52 mm Dimenzije matric: 130/115x54

Stanje: zelo dobro (rabljeno), Thread cutting tool steel (108141) Rbjdpfjigqr Rex Ad Tst Manufacturer: Comet Type: FG 2 for external threads Includes thread cutting dies: 60-degree and 55-degree Supplied in wooden case

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, High-Utility Profile Milling and Thread Milling Machine ZFWVG 250x5000 / S7 Rjdpfx Ajw Hquxod Tjbt • Thread milling • Gear hobbing • Longitudinal milling Maximum workpiece diameter over carriage: 250 mm Maximum workpiece diameter over bedways: 500 mm Workpiece spindle bore: 102 mm Tailstock quill stroke: 100 mm Main motor: 4.0 kW Cross axis feed motor (x): 4.3 kW Longitudinal axis feed motor (z): 3.8 kW Electrical equipment Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic controller for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Required space: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard accessories: • Standard thread milling attachment ApG • Maximum milling diameter: 150 mm • Internal taper of milling spindle: Morse 3 • Maximum profile with gear hobbing: Module 3 • Smallest to largest tooth count when gear hobbing: 4-50 Options: • Gear hobbing attachment ApFW Gear hobbing of parallel and helical profiles up to module 7 Maximum milling diameter: 150 mm Internal taper of milling spindle: Morse 4 • Heavy-duty thread milling attachment ApGS Gear hobbing of parallel and helical profiles up to module 5 Maximum milling diameter: 150 mm Internal taper of milling spindle: Morse 4

Stanje: rabljeno, Navojno držalo, navojna glava WMW tip GSA 2 Vpenjanje: MK 2 Območje rezanja: M 5 - M 16 - nastavljiva drsna sklopka Lastna teža: 3 kg Samodejno obračanje v desno in levo z oporno palico. Stroj ne potrebuje obratne smeri. Navojni sveder se vpne na gred in na štirikot z nastavljivimi nosilci. Rbsdpfx Adexf Uyms Tst Oba nosilca manjkajo (jih pa je mogoče dokaj enostavno izdelati). Za rezanje desnega navoja.

Stanje: rabljeno, Leto izdelave: 1991, Workpiece diameter: 30 mm Thread length: 110 mm Thread pitch: 0.5–2.75 mm/lead Total power requirement: 4.5 kW Machine weight: approx. 1.7 t Space requirement: approx. m MONNIER & ZAHNER Switzerland Thread Whirling Machine with Workpiece Loading Device Type MZ 600, Year of manufacture approx. 1991, #3591 Max. workpiece diameter: approx. 30 mm Max. workpiece length: approx. 110 mm Axial milling length: approx. 100 mm Module in steel: approx. 1 Starts: 1 Minimum/maximum centre distance tool–workpiece: 0 - 70 mm Whirling head swiveling: +/-12° Tool size approx.: 70 x 16 mm Whirling head speeds approx.: 1,000–6,000 rpm Pitch range approx.: 0.5–2.75 mm/lead Rodpfxst Hwzce Ad Tsbt Whirling head drive: approx. 1.5 kW Total drive approx.: 4.5 kW – 220 V/380 V / 50 Hz Weight: approx. 1,700 kg Accessories / Special Equipment: Machine designed for the production of medical screws. Equipped with an automatic workpiece feeder via a Rübenach vibratory bowl with pneumatic swing gripper for insertion of blanks, as well as with counter-center (inserter) and ejector in the workpiece spindle head. Pneumatic workpiece clamping device in the workpiece spindle head. The finished parts are ejected and fall into a collection container. The tool slide is designed as both a longitudinal and a cross slide; the longitudinal slide determines the thread length and pitch via the leadscrew, and the cross slide determines the thread depth. Copying device at the end of the cross slide with template holder for conical screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electric program control with display of motion sequence. Fault indicator, workpiece counter, oil mist extraction, coolant system, etc.

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 50 mm Thread length: 100 mm Thread pitch: mm Total power requirement: 1 kW Machine weight approx.: 1,500 kg Space requirements approx.: m MONNIER & ZAHNER Switzerland Horizontal thread and worm milling machine with workpiece loading device Type: 256 Year of manufacture: approx. 1985 # 1349 _____ Max. workpiece diameter: 1.5 – 50 mm Max. workpiece length: 100 mm Axial milling length: 100 mm Module in steel: 1 Minimum worm starts: 1 Min./max. center distance tool-workpiece: 0 – 70 mm Rbedpfx Aot Hwn Nsd Tst Milling slide swiveling: +/- 30° Cutter size (Ø x length): 70 x 16 mm Cutter speeds approx.: 1,000 rpm Feed range, steplessly adjustable: 0 – 6 m/min Spindle drive: approx. 0.6 kW Total drive: approx. 1 kW - 220 V/380 V / 50 Hz Weight: approx. 1,500 kg Accessories / special equipment: • Simple machine for manufacturing (medical) screws or worm gearing onto shaft-shaped workpieces • LANDIS & GYR program control PCA • Fold-out workpiece magazine, incomplete • Pneumatic tailstock slide, or steady rest support, approx. 100 mm stroke • Approx. 20 collets for workpiece clamping • Various change gears for generating thread pitches • Workpiece counter Condition: Good – ready for demonstration, under power Delivery: ex stock – as inspected Payment: strictly net – after order confirmation We have approx. 100 further gear machines in stock and welcome your inquiry.

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Rbsdpstzdyzefx Ad Tjt Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Rbjdpfst Hw N Tjx Ad Tet Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Stanje: rabljeno, Leto izdelave: 1985, Thread diameter 254 mm Grinding length 350 mm Rsdpfxot Hw U Aj Ad Tjbt Thread pitch 51 mm Control SIEMENS S 8 Total power requirement 12 kW Machine weight approx. 5000 kg Space requirement approx. m Internal thread grinding machine with PLC control

Stanje: novo, High-performance thread tapping machine with leadscrew mechanism. Safety system to prevent tool breakage. Programs for single and continuous operation, programmable thread depth, piece counter, LED light, and electronically controlled motor braking for single-cycle mode. Easy leadscrew change via quick coupling. Rjdpfsfrlndjx Ad Tebt Normal drilling capacity: 15 mm Thread tapping capacity: M 3 – M 10 Threads per hour: 1,000 Spindle: MK 2 Thread depth: 60 mm Drilling depth: 100 mm Throat depth: 250 mm Spindle/table distance: 185 to 541 mm Table surface: 340 x 445 mm T-slot width: 12 mm Column diameter: 90 mm Overall height: 1,050 mm Weight: 120 kg Special motor: 0.55 kW Power supply: 400 V/50 Hz BT 18 GL M00033 4 spindle speeds: 320 rpm, 560 rpm, 1,000 rpm, 1,600 rpm Also available as a column drilling machine BS 18 GL (M00034)! Digital speed display as standard. Column extended by 200 mm: 14154

Stanje: novo, High-performance thread cutting machine with leadscrew and optimal safety mechanism to prevent tool breakage. Programmable for single or continuous cycle operation. Electronically controlled motor brake in single cycle mode. Easy leadscrew change via quick coupling. Technical Data UNIMAX 3T GL: Thread cutting capacity: M4 - M20 Threads per hour: 800 Standard drilling capacity: 28 mm Spindle: MK 3 Thread depth: 90 mm Drilling depth: 120 mm Throat depth: 260 mm Spindle / table distance: 220 - 600 mm Table surface: 420 x 390 mm T-slot width: 14 mm Rodsgv I Unopfx Ad Tobt Column diameter: 110 mm Overall height: 1,300 mm Weight: 250 kg Special motor: 0.9 kW Power supply: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packaging: C - 160x75x125 cm Additional accessories/options: Leadscrew, tap holder, retract-release mechanism, externally ventilated motor, die holder, flange quill, foot pulse switch, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet

Stanje: novo, minimalni premer metričnega navoja: 3 mm, največji premer metrickega navoja: 24 mm, Model RE16 to M16, Model RE24 to M24 · Ball-bearing, wear-free parallel arm with a radius of 1270 or 1800 mm · Connection: 230V / 1Ph · Infinitely variable speed adjustment · Digital speed display · Digital depth control with memory for 5 programs · Quick-change holder according to DIN standard Options: Micro-spray system for model 1800 Cast iron table Redpfx Ajrb Akmod Tjbt Wheels for cast iron table Multi-function head for cutting at any angle

Stanje: dober (rabljeno), Leto izdelave: 2007, Premer obdelovanca 1400 mm Premer izvrtine 100–500 mm Krmiljenje Sinumerik 840D Rodpfxewzmqrj Ad Tjbt

Leto izdelave: 1990, Stanje: rabljeno, Spindle mount: 2 x SK 40 Front bearing diameter: 110 mm Milling spindle speed range: 100 - 4500 rpm Milling drive: 5.1 kW Workpiece length - max.: 830 mm Workpiece diameter with double loading max.: 135 mm Clamping diameter: 78 g6 mm Center height: 260 mm Speed range - stepless max.: 15 rpm Center distance: 135 mm Spindle nose: DIN 55026, size 5 Rbedpstqqqdjfx Ad Tst Workpiece slide (X-axis) Workpiece slide travel: 810 mm Feed rate max.: 6 m/min Clamping surface: 200 x 1750 mm Tool post (Z-axis) Tool slide travel: 120 mm Feed rate max.: 2 m/min Post adjustment: 200 mm Tailstock Tailstock sleeve stroke: 100 mm Morse taper: 3 MT Center height: 260 mm Quill center distance: 135 mm Steady rest capacity: 40 - 80 mm Control: SIEMENS SINUMERIK 810 Machine weight: approx. 6.5 t Space requirement: approx. 3.20 x 2.66 x 1.76 m = Double-spindle cam milling machine / thread milling machine with 4th axis Accessories: various tool holders, steady rests, center points, coolant system

Stanje: rabljeno, 2 rabljeni stroji za valjanje navojev WMW UPW25 ---Samo 10.000,00 EUR--- Rjdpfx Ajx Dmnyed Tebt

Stanje: nepreverjeno (rabljeno), Weight: approx. 4,500 kg Rbedswv N Ehopfx Ad Tot

Stanje: rabljeno, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer: PEE-WEE Type: P 24 Q Serial No. LC2403099 Year of manufacture: 2004 Rbsdpfjh A S Htox Ad Tst Rolling force: max. 24 tons Tool diameter: max. 200 mm Rolling spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Holder length, tool length: max. 180 mm Workpiece diameter: max. 50 mm Rolling spindle speed: 22 - 44 - 95 - 190 rpm Hydraulic motor power: approx. 3 kW Roll drive motor power: 5.5 kW Power supply: 400 Volts, 50 Hz - Swiveling rolling spindle for through-feed thread rolling - Rolling spindle speed adjustable in 4 stages via gear shift - Hydraulic system integrated in machine bed Space requirements (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge rolling: Thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece to its nominal diameter. The maximum thread length is equal to the width of the rolling tools. Through-feed rolling: Used when the thread length is greater than the width of the rolling tools. Through-feed tools consist of three sections: lead-in, calibrating area, and run-out. Groove rolls have no pitch and are swiveled by the lead angle of the profile to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle equals the pitch angle in the workpiece.

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece. Rodpfx Adjuz If Nj Tobt

Stanje: zelo dobro (rabljeno), Thread cutting steel (28397) Manufacturer: Komet Rbodpfx Adomk E Ube Tst Type: FG II 60 degrees with tool holder type RB ST III unused, from stock liquidation

Stanje: pripravljen za uporabo (rabljen), Na voljo je pet starejših rezkalnih strojev za navoje Mikron: 3x hidravlični stroj za valjčno rezkanje navojev Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 in 1x stroj za kratko navojno rezkanje Mikron 106.01. Ogled na lokaciji je mogoč. Rsdpfxow Sxyxj Ad Tsbt

Stanje: novo, – Kapaciteta M5–M36 – Hidravličen – Delovno območje 2050 mm – Vrtljiva glava – Hitromenjalni vpenjalec – Brezstopenjsko nastavljiva hitrost narezovanja navojev – Brezstopenjsko nastavljiva povratna hitrost – Digitalni prikazovalnik vrtljajev – Vključno s 14 nastavki za narezovanje navojev – Masivna delovna miza s T-utorom – Mazalni sistem z ročno ali avtomatsko funkcijo Rbsdsxtq Shjpfx Ad Tst – Nujni izklopni gumb – Dokumentacija – 400V

Stanje: rabljeno, TECHNICAL DATA - Max. capacity: 40 [t] Rbsdpeuhb Uhjfx Ad Tst - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions (L x W x H): 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock device - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Stanje: rabljeno, TECHNICAL DATA Rbodpeuhb Unjfx Ad Tjt - Max. workpiece length: 1350 [mm] - Max. tooth length: 1200 [mm] - Max. tooth diameter: 120 [mm] - Power output: 18.5 [kW] - Machine dimensions: 2840 x 1700 x 1420 [mm]

Stanje: novo, Hydraulic Thread Cutting Machine Easy Tap ETH 24 Thread Diameter up to M 24 Speed 0 – 600 rpm Thread Sizes M 5 – M 24 Rodpetbawkjfx Ad Tebt Working Range 2050 mm max. Working Height 920 mm Table Surface 900 x 700 mm Oil Capacity 100 litres Motor Power 3.0 kW Weight: 220 kg Equipment: • Hydraulic thread cutting machine • Includes machine base frame with clamping plate • Mobile (on wheels) • Hydraulic pressure gauge • Infinitely variable speed adjustment from 0 – 600 rpm • Vertical and horizontal threading possible • Special accessories included / Quick-change inserts: M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Leto izdelave: 2022, Stanje: novo, Pneumatic Tapping Arm Model: R1950-08 Capacity: M2–M8 Speed (rpm): 700 Air Consumption: 750 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 38x29 mm) Weight: 23 kg Collet Interface: TCS 1B Model: R1950-12 Capacity: M3–M12 Speed (rpm): 400 Air Consumption: 750 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 38x29 mm) Weight: 23 kg Collet Interface: TCS 1B Model: R1950-16 Capacity: M3–M16 Speed (rpm): 300 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 38x29 mm) Weight: 27 kg Collet Interface: TCS 2B Model: R1950-020 Capacity: M3–M20 Speed (rpm): 150 / 400 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 58x40 mm) Weight: 39 kg Collet Interface: TCS 2B Model: R1950-022 Capacity: M3–M22 Speed (rpm): 120 / 300 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 58x40 mm) Rbsdpfx Adsipmr Ij Tjt Weight: 39 kg Collet Interface: TCS 2B Model: R1950-027 Capacity: M3–M27 Speed (rpm): 70 / 220 Air Consumption: 950 l/min Pressure: 6–7 bar Working Range: Rmin 300 mm – Rmax 1950 mm Parallel Arm Design: Sturdy arm structure (hard aluminium profile 58x40 mm) Weight: 39 kg Collet Interface: TCS 2B Standard accessories for all models: - Parallel arm - Pneumatic motor - 6 safety clutch adapters of your choice - Mounting column with flange - Radial extension arm (for a more flexible working range) - Maintenance unit - Pneumatic oil for initial filling