Tračne Žage Za Kosti nakup rabljenega (87.222)

Stanje: rabljeno, Metal band saw blade, band saw blade, metal saw band - Condition: unused, original packaging - Quantity: 5 blades available - Price: per piece - Tooth pitch: 4/6 - Dimensions: 2085 x 20 x 0.9 mm Itsdpfx Afecud I No Tsb

Stanje: rabljeno, Metal band saw blade, band saw blade, metal saw band - Unused - Quantity: 7 blades available - Price: per piece - Tooth pitch: 6/8 Itedpob A S Dcjfx Af Teb - Dimensions: 4570 x 41 x 1.7 mm

Stanje: rabljeno, Metal band saw blade, band saw blade, metal saw band - Unused, in original packaging - Quantity: 7 blades available - Price: per piece Ijdpsb A S Tvsfx Af Tetb - Tooth pitch: 4/6 K-POS - Dimensions: 2835/27/H0.9 mm - Weight: 0.6 kg/piece

Stanje: rabljeno, Scoring Circular Saw Blade, Scoring Saw Blades, Carbide Scorer -Manufacturer: Schäffer, 2-piece adjustable carbide scoring saw blades -Type: 120 x 2.8-3.6 x 22 Z=2x12 -Quantity: 9x scoring blades available Itsdpfouvaaaex Af Tjb -Price: per piece -Box dimensions: 225/220/H10 mm -Weight: 0.3 kg each

Stanje: zelo dobro (rabljeno), Metal band saw blade, band saw blade, metal saw blade Itsdpsb A H Elofx Af Tob - Unused, in original packaging - Quantity: 5 blades available - Price: per piece - Tooth pitch: 5/8 TPI W - Dimensions: 2950 x 27 x 0.9 mm - Weight: 0.6 kg

Stanje: zelo dobro (rabljeno), Metal bandsaw blade, bandsaw blade, metal saw band - Unused: Original packaging (OP) - Quantity: 6 blades available - Price: per piece - Tooth pitch: 4/6 - Dimensions: 4400 x 34 x 1.1 mm Itodpfx Afob A Inwj Tob

Stanje: rabljeno, Metal band saw blade, bandsaw blade, metal saw band - Quality: unused, original packaging - Tooth pitch: 3/4 K-POS - Price: per piece - Quantity: 6 blades available Iodpfx Afjfvkm Nj Tjtb - Dimensions: 3830x27x0.9 mm - Weight: 0.8 kg/piece

Stanje: novo, Model designation: Shark 282 CCS Ijdpfjgvkbcsx Af Totb

Stanje: novo, Model designation: Shark 281 SXI evo Isdpogvkglofx Af Tetb

Stanje: novo, Model designation Isdsgvkchepfx Af Tjtb Shark 281 CCS

Stanje: novo, Model designation Isdpfx Afol Sva Io Totb SHARK 331-1 NC 5.0 SPIDER

Stanje: novo, Model designation Itodpfx Aegvkafsf Tsb Shark 332-1 SXI evo

Stanje: novo, Model designation Shark 332-1 CCS Itodpogvquwofx Af Teb

Stanje: novo, Model designation: Shark 282 SXI evo Iodpfxegvkcts Af Tetb

Stanje: rabljeno, Diameter: 370 – 380 mm Width: 3-5 mm Bore: 60 mm Bolt circle: 100 mm - as new or sharpened, - 8 pieces, - suitable for Holzma OPT HPP 350 or similar. Iedpfxjlf I D Ej Af Tstb

Stanje: zelo dobro (rabljeno), Panel saw with rear lifting table infeed Control system: Power Concept Ijdpfx Aeimr Icjf Tjtb Software: CADmatic 4 Professional Lifting table infeed (mm): 4300 x 2200 No. 2 rear pushers (TWIN PUSHER) model POWER CONCEPT With clamping grippers Infeed equipment for thin panels (min. thickness mm): 3 Max. cutting width (mm): 4300 Usable stroke of pusher (mm): 4300 Max. saw blade projection (mm): 95 (automatic) Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 380 mm / 13.5 kW (max. 18 kW) Adjustable saw carriage feed (m/min): 1 - 150 Front air flotation tables (qty): 4 Total connected load (kW): 28 OPTION: - Cut Rite software (optimization) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Label printer (option) - Software LABELING PACKBR 3/4/5 (labels)

Stanje: zelo dobro (rabljeno), Für Platten mit den Maßen 5600 x 2600 (2700 mm), Dicke von 2 mm bis 60 mm - Nr. 2 Doppel-Deck-Zuführrollenbahnen, 1 x 6.000 mm lang und 1 x ca. 3.800 mm lang - Hydraulischer Hubtisch (ca. 5600 x 2700 mm) - System mit Gummirädern (11 oben + 11 unten) zum Andrücken und Zuführen der Platten - Fahrbare Traverse mit 45 Saugern und 5 Auflagearmen (zur Ausrichtung des Plattenstapels) - 1. Rückseitiger Schieber mit 11 Spannzangen - Drehtisch (für 90°-Drehung der Platte) mit Kunststoffrädern - 1. Plattensäge AH8 580 - max. Schnittbreite 5600 mm (max. Sägeblattüberstand 165 mm) - Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) - Hauptsägesystem (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) - Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 - 150 - Fahrbare Quertraverse mit 7 Schiebergeräten für geschnittene Platten - Mit 4 Auflagearmen (zur Ausrichtung des Plattenstapels) und 3 motorisierten Ketten - 2. Rückseitiger Schieber mit 25 (27) Spannzangen/Greifern - 2. Plattensäge - max. Schnittbreite 2700 mm (max. Sägeblattüberstand 165 mm) - Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) - Hauptsägesystem (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) - Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 - 150 - Restholzentsorgungssystem mit VECOPLAN-Zerkleinerer (55 kW) - Tisch mit Kunststoffbeschichtung für den Zuschnittauslauf - Stapelsystem für geschnittene Platten mit 2 vorderen Auflagetischen mit Luftausblassystem 400 x 6300 mm + 8 Hubtischen (4 x 1300 x 1600 mm und 4 x 1300 x 1410 mm) - Gesamtanschlusswert: 130 kVA Itedpfx Afoxvc N De Tjb

Stanje: zelo dobro (rabljeno), Power Control control system – CadMAtic 4 Professional software Roller conveyors for feeding the lifting table (mm 32,000) Lifting table (mm) 5,600 x 2,200 VAC infeed cart for gentle loading of sensitive single panels via vacuum 1st pusher saw with no. 6 collets Turning device (for panels) up to 90° 1st panel dividing saw, max. cutting width (mm) 5,600 (cutting line with air cushion) Max. saw blade protrusion (mm) 190 Scoring saw (max. saw diameter / power) mm 200 (kW 2.2) Main saw (max. saw diameter / power) mm 600 (kW 36) Adjustable saw carriage feed (QS) (m/min) 1–130 2nd pusher saw no. 14 with collets 2nd panel dividing saw, max. cutting width (mm) 2,200 (cutting line with air cushion) Max. saw blade protrusion (mm) 190 Scoring saw (max. saw diameter / power) mm 200 (kW 2.2) Main saw (max. saw diameter / power) mm 600 (kW 36) Adjustable saw carriage feed (QS) (m/min) 1–130 Shaker trough, chip removal conveyor belt with cross-cutting unit (kW 19.5) Itodovnq H Ejpfx Af Tob No. 2 front air-cushion tables (+ 1 additional and more) (mm 800 x 2,160) Rollers in flocked design for highly sensitive materials Automatic stacking (No. 2 transfer tables: No. 2 x Liftomat HAU-A 25/12) Automatic stacking system with 8 stations

Stanje: zelo dobro (rabljeno), Für Platten mit den Maßen 5600 x 2600 (2700 mm), Dicke von 2 mm bis 60 mm - Nr. 2 Doppel-Deck-Zuführrollenbahnen, 1 x 6.000 mm lang und 1 x ca. 3.800 mm lang - Hydraulischer Hubtisch (ca. 5600 x 2700 mm) - System mit Gummirädern (11 oben + 11 unten) zum Andrücken und Zuführen der Platten - Fahrbare Traverse mit 45 Saugern und 5 Auflagearmen (zur Ausrichtung des Plattenstapels) - 1. Rückseitiger Schieber mit 11 Spannzangen - Drehtisch (für 90°-Drehung der Platte) mit Kunststoffrädern - 1. Plattensäge AH8 580 - max. Schnittbreite 5600 mm (max. Sägeblattüberstand 165 mm) - Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) - Hauptsägesystem (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) - Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 - 150 - Fahrbare Quertraverse mit 7 Schiebergeräten für geschnittene Platten - Mit 4 Auflagearmen (zur Ausrichtung des Plattenstapels) und 3 motorisierten Ketten - 2. Rückseitiger Schieber mit 25 (27) Spannzangen/Greifern - 2. Plattensäge - max. Schnittbreite 2700 mm (max. Sägeblattüberstand 165 mm) - Vorritzaggregat (max. Sägeblattdurchmesser/Leistung) ca. 200 mm (ca. 2,2 kW) - Hauptsägesystem (max. Sägeblattdurchmesser/Leistung) 520 mm (32 kW) - Verstellbare Vorschubgeschwindigkeit des Sägewagens (m/min) 0 - 150 - Restholzentsorgungssystem mit VECOPLAN-Zerkleinerer (55 kW) Isdpfx Afjxvc Rzo Tetb - Tisch mit Kunststoffbeschichtung für den Zuschnittauslauf - Stapelsystem für geschnittene Platten mit 2 vorderen Auflagetischen mit Luftausblassystem 400 x 6300 mm + 8 Hubtischen (4 x 1300 x 1600 mm und 4 x 1300 x 1410 mm) - Gesamtanschlusswert: 130 kVA

Stanje: zelo dobro (rabljeno), Panel saw with rear lift table Control system: POWER CONTROL Software: CADmatic 4 Professional Lift table feed (mm): 3800 x 2200 Rear pusher (qty.): 1 Itsdpfx Afjh Imvhs Tsb With clamping grippers: 7 Rotary device (for panels): up to 90° Max. cutting width (mm): 3800 Usable stroke of pusher (mm): 3800 Max. saw blade projection (mm): 95 Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 380 mm / 13.5 kW Adjustable saw carriage feed (m/min): 1 - 130 Front air cushion tables (qty.): 3 (2160 mm x 650 mm) Total connected load (kW): approx. 28

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear Itodpfx Asukhd Asf Tsb 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 1500 kg Total power requirement 10.2 kW Fully-automated optimizing cross-cut saw with full optimization TR-600 MATRIX-6000 - Motor drive power 9.2 kW - Saw blade diameter 600 x 30 mm Z=60 - Cutting capacity according to cutting diagram - Cutting capacity 150 x 365 mm - Cutting capacity 130 x 440 mm - Cutting capacity 100 x 530 mm - Cutting capacity 60 x 580 mm - Cutting capacity 30 x 610 mm - Cutting cycle 6 seconds - Hydraulic cross-cut unit - Work table inclined by 8° - Minimum workpiece thickness 10 mm - Safety cover over cross-cutting unit - CE standard - Weight 1500 kg Electrical specifications: - Supply voltage 400 V / 50 Hz Itjdpfx Afsv A Htke Tjb - Control voltage 24 V - Extraction ports 4 x diameter 100 mm - Extraction capacity 2400 m³/h - Air speed at center of extraction port approx. 25–35 m/s Electronically controlled pusher: - Feeding length: 6000 mm - Max. pusher speed 90 m/min - Driven by brushless servomotor - Feed system with precision rack and pinion, length measurement via servomotor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination 8° - Positioning tolerance +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 px) - Create cutting lists directly on the machine control - Up to 1,000 cutting lists with 10 dimensions each - Single list with 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, workpiece sequence) - 3 optimization options (volume, minimal waste, priority) - Standard with USB and Ethernet interface - Includes OPTI function for automatic measurement of the workpiece to be cut. Optimal for processing variable-length material, for single or bundle feeding. - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for reading markings, enabling full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp €850.00 - Creating cutting lists on PC €360.00 - Outfeed table €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully Automatic Optimizing Cross-Cut Saw with Full Optimization TR-500 MATRIX-6000 - Main motor power: 7.5 kW - Saw blade diameter: 500 x 30 mm, Z=144 - Cutting capacity according to cutting diagram - Cutting capacity: 135 x 280 mm - Cutting capacity: 125 x 295 mm - Cutting capacity: 95 x 325 mm - Cutting capacity: 80 x 340 mm - Cutting capacity: 55 x 360 mm - Cutting cycle: 4 s - Pneumatic cross-cutting unit - Worktable inclined by 8° - Minimum workpiece thickness: 10 mm - Safety cover over cross-cutting unit - CE compliant - Weight: 1000 kg Electrical specifications: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction outlets: 4 x Ø 100 mm - Extraction capacity: 2400 m³/h - Air consumption per cycle: 4 Nl - Extraction air velocity at the nozzle center: approx. 25–35 m/s Electronically controlled pusher: - Infeed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servomotor - Feed system with precision rack and servomotor-based measurement - Pneumatic lifting of the pusher at cycle end and overhead return - Photocell workpiece length measurement - Photocell defect detection - Fluorescent chalk marking - Worktable inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12” touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly at the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization modes (maximum length, sequence, and workpiece sequence) - 3 optimization modes (volume, minimal waste, and priority) - Standard USB and Ethernet interface - Includes OPTI function for automatic measurement of workpieces to be cut. Optimal solution for processing variable length material with single or bundle feeding - 6 optimization modes (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes OPTI PLUS function for detecting markings, thereby enabling full optimization and removal of knots and defects - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creation of cutting lists on PC: €360.00 Isdpfx Aev A Htdjf Tetb - Outfeed table: €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H): 0 x 0 x 0 mm Weight: 900 kg Total power requirement: 5 kW Fully optimizing automatic crosscut saw TR-450 MATRIX-6000 - Drive motor power: 4.0 kW - Saw blade diameter: 450 x 30 mm Z=72 - Cutting capacity according to cutting diagram - Cutting capacity: 95 x 265 mm - Cutting capacity: 85 x 277 mm - Cutting capacity: 60 x 290 mm - Cutting capacity: 40 x 310 mm - Cutting capacity: 25 x 330 mm - Cutting cycle: 4 seconds - Pneumatic crosscutting unit - Inclined worktable at 8° - Minimum workpiece thickness: 10 mm - Safety cover over crosscutting unit - CE compliant - Weight: 900 kg Electrical connection: - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 2 x 100 mm diameter - Extraction performance: 2400 m³/h - Air consumption per cycle: 6 Nl - Air velocity at extraction port center: approx. 25–35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and mass measuring via servo motor - Pneumatic pusher lift at cycle end and overhead return - Photocell for workpiece length measurement - Photocell for defect detection - Marking with fluorescent chalk - Work surface inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence Iedsv A Hr Topfx Af Tjtb - Three optimization options (maximum length, sequence, part sequence) - Three optimization options (volume, minimal waste, priority) - USB and Ethernet ports as standard - Includes OPTI function for automatic measurement of the workpiece to be cut. Ideal solution for processing material with varying lengths, with single or bundle feeding. Six optimization options (maximum length, sequence, part sequence, volume, minimal waste, priority). - Includes OPTI PLUS function for detection of markings, ensuring full optimization and removal of knots and defects. - Marking with chalk Options: - Pneumatic side clamp: €850.00 - Creating cutting lists via PC: €360.00 - Outfeed table: €360.00/m

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 4500 x 1200 x 1200 mm Weight: 1,500 kg Total power requirement: 8 kW Optimisation Crosscut Saw WS1 - Cutting height Position A: 130x175, 120x200, 100x230, 85x250, 50x280, 15x305 mm Position B: 100x290, 80x315, 50x340, 30x355, 15x365 mm - Cutting speed: up to 100 cycles/min - Feed speed: 120 m/min - Motor power: 7.5 kW - Voltage: 400 V / 50 Hz - Saw blade diameter: 500 mm, bore 30 mm - Speed: 3,600 rpm - Min. workpiece length: 550 mm - Min. workpiece width: 40 mm - Min. workpiece height: 15 mm - Cutting accuracy: +/- 0.8 mm Itodpfxjvz Hz Ee Af Tjb - Infeed roller conveyor right: 2,000 mm with double marking station - Outfeed table left: 1,000 mm - Extraction connection diameter: 200 mm - Air consumption: 20 NL/cycle - Operating pressure: 6 bar - Working height: 930 mm - PLC control with 7'' colour touch screen for easy operation + fixed-length crosscut mode + sequential crosscut mode (10 different dimensions can be saved) + crosscutting of marked chalk lines + fixed-length and marked chalk line crosscutting - CE conformity - Dimensions: L=4500, W=1200, H=1200 mm - Weight: 1,500 kg