Tračne Žage Za Kosti nakup rabljenega (84.861)

Stanje: rabljeno, Cutting length: 4,300 mm Cutting height: 2,150 mm Automatic ELCON Precision Panel Saw Type D 215 ----- Cutting height: vertical 2,150 mm, horizontal 2,100 mm Cutting length: 4,300 mm ----- Technical Specifications: Cutting depth: max. 60 mm Saw blade extension behind panel: max. 25 mm Saw blade: Diameter 250 mm, bore 30 mm, Z=48 hollow flat teeth Saw blade speed: 5,100 rpm Cgodpji Hc S Djfx Afnjp Motor: 4 kW (S 6) Measurement Readout for: horizontal cuts: via scale and strip cutting stop vertical cuts: via scale Extraction ports: 100 & 80 mm Required air pressure: 6 bar Features: -Material support with 1 roller per meter of cutting length, can be engaged and disengaged via foot pedal -1 infeed and outfeed roller -pneumatically retractable slat frame -central support, 1 support element per meter cutting length, can be folded out individually by hand -Scoring system: main saw blade double cut -torsion-resistant, free-standing machine frame -Two folding stops for vertical cuts (above and below the central support) ----- Special price "Partnership Edition" ex works in this configuration: on request! ----- Plus pre-carriage, shipping, installation and commissioning (provided the machine does not need to be dismantled). Valid within Germany only. Unloading and transport to final installation site to be handled by customer. Price: EUR 1,900.00 plus statutory VAT ----- Options at extra cost: Cutting length 5,300 mm instead of 4,300 mm Order no.: ELCO0075/O049 Additional charge: EUR 2,590.00 plus statutory VAT ----- Technical details as per manufacturer – subject to change without notice.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Schorch elektromotor 75 kW – 735 obr./min. Za neposreden pogon žage okvirja. Z ojačanimi ležaji. Z jermnico premera 400 mm. Cedpjxvpqbsfx Afnjgp

Stanje: dober (rabljeno), Leto izdelave: 1992, I am selling an automatic pneumatic cross-cut saw, GreCon Dimter 2004, year of manufacture 1992. Csdpfxst Ir Nqs Afnogp Automatic infeed table / through-feed system Outfeed table 3 ejectors on the left outfeed table Total length: 15.50 m Optimization with automatic defect detection and automatic cut pattern programming. Available immediately. Spare parts and documentation included.

Stanje: generalkompletno obnovljen (rabljeno),

Leto izdelave: 2022, stanje: novo, I am selling 150 sets of new saw blades suitable for multi-blade saws and gang saws. Saw blade PILANA 290 x 2.5 x Bore 60 Teeth 30+4 FZ and PILANA 250 x 2.3 x Bore 60 Teeth 30+4 FZ Cedpfx Afew Am Imsnegp Total price: 2,000 euros. Immediately available.

Stanje: novo, HSS circular saw blades for steel processing partly with side holes: 315 x 2.5 x 32 mm, 90 teeth 315 x 2.5 x 32 mm, 98 teeth Cjdpec R Tyqofx Afnogp 225 x 1.9 x 32 mm, 90 teeth

Stanje: novo, Leto izdelave: 2025, – Dolžina 300 cm – Zaslon na dotik – Enostavna namestitev na stroje – Nastavljiva višina Cgjdpsx Hq D Tsfx Afnsp – Nujni izklop – 230V (Žaga, prikazana na fotografiji, je na voljo za doplačilo)

Leto izdelave: 1986, stanje: dober (rabljeno), številka stroja/vozila: 120 603, Cutting capacity round: 250 mm Cutting capacity rectangular: 250 mm Saw blade dimensions: 3660 x 25 x 0.9 mm Cjdpfx Aef S Ilysfnogp Blade speed: 20 - 70 m/min Saw drive: 1 kW Space requirement: 1900 x 1450 x 1250 mm Weight: approx. 850 kg

Leto izdelave: 1986, stanje: rabljeno, številka stroja/vozila: 1358, Cutting capacity round: 400 mm Cutting capacity rectangular: 400 mm Single feed length: 600 mm Saw blade dimensions: 6200 x 38 x 1.3 mm Blade speed: 12 - 100 m/min Cgedpfebgnfyjx Afnep Saw drive: 380 V, 7.5 kW Required space: 2850 x 2100 x 1900 mm Weight: approx. 3000 kg

Stanje: pripravljen za uporabo (rabljen), Brusilnik, ostrilo za tračne žage Bratstvo Lignum. Stroj je kompleten in tehnično brezhiben. Lahko je dodatno opremljen z valji za držanje tračnega lista. Cjdpfx Afsxx Uxisnegp

Stanje: zelo dobro (rabljeno), Contact wheels for belt grinders by FICARD - Friedrich August Picard Wheels compatible with grinders such as GREIF and METABO. Set of 4 wheels with the following dimensions: - 450 mm diameter - 50 mm wheel width - 45 mm bore diameter Codpfowtzruex Afnogp - SH 65 hardness

Stanje: zelo dobro (rabljeno), Contact wheels for belt grinders by FICARD - Friedrich August Picard Wheels suitable for belt grinders such as GREIF and METABO 2 wheels with the following specifications: No. 1 – wheel with rubber coating: - 450 mm diameter - 50 mm wheel width - 32 mm bore diameter - 65 Shore hardness Cgsdewt Akrspfx Afnsp No. 2 – wheel with foam coating: - 400 mm diameter - 50 mm wheel width - 32 mm bore diameter - 25 Shore hardness

Stanje: novo, Cutting capacity at 90 degrees (round): 240 mm Cutting capacity at 90 degrees (square): 240 mm Cutting capacity at 90 degrees (rectangular): 165 x 310 mm Saw blade length: 2,725 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Csdpfofgyh Hox Afnegp Total power requirement: 1.1 kW Machine weight: approx. 0.4 t The Z252/DGH is equipped with: - Hydraulic semi-automatic operation - Double mitre, 60° left / 45° right - Emulsion pump - Machine base - Saw blade - 400V, 16A plug The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cut width: 300 x 180 mm Speeds: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight: approx. 450 kg Space requirement: approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts: left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting: extremely quiet and low-vibration operation Cjdpfx Afofn Andenegp • Hydraulically operated vice, laterally adjustable • Guided, high-quality industrial bearings • Heavy-duty vice and machine cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable cutting pressure feed regulator • Support roller on infeed side • Ball-bearing rotary table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to material start or, for serial cutting, start cutting immediately 4. Stop saw band 5. Raise frame slightly above the material 6. Open vice

Stanje: novo, Cutting diameter: 227 mm Saw band length: 2455 mm Table height: 840 mm Cutting width: 260 mm Speed range: 36 / 72 m/min Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting area at 90 degrees (round): 227 mm Cutting area at 90 degrees (square): 220 mm Cutting area at 90 degrees (flat): 260 x 220 mm Cutting area at 45 degrees (round): 150 mm Cutting area at 45 degrees (square): 145 mm Cutting area at 45 degrees (flat): 200 x 220 mm Total power requirement: 1.5 kW Machine weight approx. 0.25 t Space requirement approx. 0.8 x 1.4 x 1.5 m Mitre band saw - automatic cutting Cedpfx Aofgyh Eofnogp - base frame - coolant pump - chip brush for saw blade cleaning - quick-adjust vice

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw band length 3375 x 27 x 0.9 mm Band speed 18 – 100 m/min Table height 940 mm Codpfxjfgyiae Afnogp Total connected load 1.5 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing turntable - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) Cedpfx Afofgyicjnsgp • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Cedpfx Afjfg E Hlenogp Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor Csdjd Iipxepfx Afnsgp - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting range at 90 degrees: round 250 mm Cutting range at 90 degrees: square 210 mm Cutting range at 90 degrees: rectangle 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 + 70 m/min Total power requirement: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! Double mitre metal bandsaw featuring: - Band speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for rapid mitre adjustment - Movable quick-action vice - Quick-release lever Cgjdod Iip Nepfx Afnep - Automatic coolant system

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Cgodpfx Afsfgyh Sonsp Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw Hydraulic semi-automatic with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Cutting pressure and feed rate regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy miter adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. Cgjdpfx Afofg E Hpjnjp - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting capacity at 90°: round 310 mm Cgjdpfx Afjd Iiptsnop Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangle 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirement: approx. 1.5 x 1.78 x 1.3 m SPECIAL OFFER PRICE!!! Double miter bandsaw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Miter cut left 60° / right 45° • Heavy-duty industrial hydraulics, 18 bar • Optimal access to the workpiece • Ammeter for monitoring: - Cutting force optimization - Blade life - Cut accuracy • Hydraulic vice: automatic clamping and release • Swarf removal brush • Material turntable with ball bearings • Quick-release vice, movable • Height sensor for material (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Fast lowering to material, or for serial cuts, start cutting immediately 4. Saw blade stops 5. Raise saw frame slightly above material 6. Release vice

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Machine weight approx. 0.35 t Required space approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right Cedpfxjd Iip Rs Afnegp - Patented ball-bearing turntable for easy mitre adjustment - Rapid-action vice, movable - Quick-release lever - Automatic coolant system Shipping cost share: 120 EUR

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cgjdpfx Afofgyh Ronop Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 – 90 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Required space: approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed: 25 – 90 m/min - Miter cuts up to 60° left and 45° right - Ball-bearing turntable for quick miter adjustment - Sliding quick-release vise - Quick-clamping lever - Automatic coolant system