Shark nakup rabljenega (81)

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Ta MEP SHARK 330 NC eco je bila izdelana leta 2007. Gre za robustno tračno žago za kovino s maksimalnim odpiranjem primeža 335 mm, ki lahko reže okrogle materiale do 300 mm, kvadratne do 250 mm in ploščate materiale do 330 x 250 mm. Žaga deluje z motorjem 0,75 kW na 380 V in tehta 52 kg. Za več informacij o tej napravi nas kontaktirajte. Lrjdpsw Ey Hbefx Agwju Vrste uporabe Žaganje

Stanje: rabljeno, največja višina reza: 280 mm, MEP Shark 280 with micro-spray device chip drawer Blade dimensions: 2950 x 27 x 0.9 mm Maximum cutting capacity: 280 mm Lodpfowza T Tex Agwjru Maximum vice opening: 280 mm Vice height: 130 mm 2 cutting speeds Swiveling cut from 0° to 60° automatic lowering manual vice clamping coolant pump Voltage: 380 V Width: 900 mm Depth: 1900 mm total height in raised position: 1900 mm Weight: approx. 650 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special-purpose machine for plastic shredding Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, sections of wooden pallets, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Includes: - Special rotor with embedded knives (reduced load intake) - Minimal cutting gap between rotor and counter-knives Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Control: PLC Cutting chamber opening (top): 600 x 800 mm Material pieces should not exceed approx. 500x500 mm (height less relevant) Hydraulically operated pusher Screen perforation as required (25 - 40 mm) For plastics, coarser screens (30-40 mm) are recommended. *If finer shredding is required, a two-stage process with downstream Granulator Type MVZ (screens 5-15 mm) is advised. Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Further options available at extra cost: - Raise shredder by approx. 25 cm (for conveyor belt discharge preparation) + €995 net - Inclined conveyor (discharge height approx. 220 cm) + €8,490 net - Overband magnet + €6,750 net Ljdpfjd H R Sxox Agweru - Control for conveyor and overband magnet + €2,495 net (synchronized start/stop with shredder) - Alternatively, manual start/stop on conveyor + €497.50 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contaminants such as sand, stones, etc., cause increased wear. We are pleased to offer a free material test. You are welcome to visit us in Neckartailfingen, or you can send your material by freight forwarding, and we will document the test with images and videos. --- *Only for brittle plastics of medium hardness; *Not suitable for elastic or extremely hard and heavy plastics – this would affect machine durability. --- Optional larger models available: Base Machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1000 mm Material pieces should not exceed approx. 720x700 mm (height less relevant) From €39,995 net *options upon request Base Machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Material pieces should not exceed approx. 900x700 mm (height less relevant) From €49,975 net *options upon request Base Machine: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Material pieces should not exceed approx. 1,200x700 mm (height less relevant) From €79,975 net *options upon request

Stanje: dober (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Goliath Shark 60 Wood Chipper - Year of manufacture: 2010 - Made in Germany - New set of knives and counter-knife TECHNICAL SPECIFICATIONS: - Rotor width: 600 mm - Motor power: 18.5 kW - Number of knives: 30 pcs - 30x30 mm serrated knife - Drawer height: 170 mm - Screen diameter: 12 and 15 mm - Auto-reverse function - Feed opening: 600 x 830 mm - Discharge port diameter: 160 mm Transport dimensions: 180 x 130 x 170 cm Ledpfx Aget U Aaaoweru Weight: approx. 1300 kg

Stanje: novo, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models available on request! Motor power: 1.5/1.8 kW Vice opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 485 kg Blade speed: 36/72 m/min Cutting capacity at 0°: 250 / 220x220 / 280x220 mm Cutting capacity at 45° right: 230 / 200x200 / 220x200 mm Cutting capacity at 45° left: 200 / 170x170 / 200x140 mm Cutting capacity at 60° right: 120 / 80x80 / 140x80 mm Lrjdpfx Agocgbq Ioweu Cutting capacity at 60° left: Description Electro-hydraulic semi-automatic bandsaw SHARK 282 SXI EVO with semi-automatic dynamic and manual mode, featuring MEP-28 control for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vice closes and motor starts – Saw head lowers for the cut – Motor stops – Saw head raises – Vice opens. Semi-automatic dynamic mode (manual lowering of the saw bow to the desired position and cycle start via hand button). Some features: • New centralized control console on an articulated arm for easy operation from any working position. • Low-voltage operating panel: – Polyester membrane keypad with thermoformed, raised pushbuttons and status indicator signal. – Display for: * Diagnostics (user language messages) * Alarms (alarm cause descriptions) * Input/output status * Cut count * Time used for each cut * Saw band motor current * Saw band tension * Saw band speed * Numeric display of head position. • IP55 manual cycle lever (24 V). • Complete range of special cutting cycles. • Capability for defining further special cycles for specific applications. • New-generation, highly efficient, low-energy hydraulic control unit. • Large working table with turntable on roller bearing (265 mm), mounted with preloaded thrust bearing. • Dual blade speed (36/72 m/min) with control. • Designed to accept frequency inverter for infinitively variable blade speed from 20 to 90 m/min. • Bow stroke programmable directly from control panel to adapt to the material. • Clamping device laterally adjustable left and right, with quick-release vice. • Manual blade tension control with electronic converter and on-screen display. • Base frame with pull-out coolant tray. • Electric coolant pump for blade cooling and lubrication. • Prepared for installation of minimum-quantity lubrication system for blade (optional), in addition to standard coolant lubrication with emulsified oil. • Chip removal brush. • Machine suitable for pallet truck transportation. • Length stop for repetitive cuts. • Material support arm with roller, suitable for mounting loading table. • Bimetallic bandsaw blade for solid and profile materials. • Tools and user manual included in user’s language. For further technical data, please refer to the attached PDF document.

Stanje: novo, Leto izdelave: 2025, Dealer wanted! Customs Tariff Number: 84659600 Hopper size (mm): approx. 830 x 810 Hopper volume (m³): approx. 0.6 Motor: 22 kW; 400 V - 50 Hz - 3-phase Ljdpjvucb Ujfx Agwsru Knives: 40 pieces, multi-turnable Rotor diameter: 360 mm Control: Siemens S7-1200 PLC Throughput capacity depends on material. Approx. 1 - 5 hopper fillings / h Hydraulically actuated pusher Screen perforation: selectable (10 - 40 mm) Extraction connection: Ø 200 mm Weight: approx. 1,600 kg Dimensions (LxWxH): approx. 2290 x 1420 x 1750 mm Standard features included: - Sturdy, bent sheet metal machine base - High-performance gearbox - Intermittent hydraulic pusher - V-belt drive - Automatic star/delta start - Automatic stop when rotor runs idle - Speed 70-90 rpm for high throughput - Special guides for hydraulic pusher - Vibration-damping machine feet - CE compliant

Stanje: rabljeno, Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M60L/8583, Številka ponudbe: M60L/8583 Tip stroja: Pralni stroj za vijake Proizvajalec: MOC DANNER Model: Shark 100 Lsdpfx Aowi Swyegwsru Leto izdelave: 2014 Kapaciteta: 250 kg Lokacija: V našem skladišču

Stanje: novo, Cutting diameter: 350 mm Saw blade length: 4640 x 34 x 1.1 mm Cutting width: 350 mm Control: NC 5.0 Band speed: 15 - 100 m/min Cutting range at 0 degrees, round: 350 mm Cutting range at 0 degrees, square: 350 x 350 mm Table height: 860 mm Total power requirement: 4 kW Machine weight approx. 2.8 t Lrsdpfx Agowu Hhdjwju Shark 350 NC 5.0, automatic hydraulic band saw in double-column design for 0° cuts up to maximum 350x350 mm. Standard equipment includes: - Driven chip conveyor, can be installed on either side of the machine - Clamping pressure regulation for the vices - Feeder with vertical rollers for lateral material support - Numerically controlled band saw, can also be operated semi-automatically, featuring the new MEP 50 control system, developed by MEP specifically for automatic machines, Windows "CE" based - "Clean Cut" cycle: the feeder pushes the workpiece back to avoid scoring at the cut surface when the blade rises again at the end of the cut - Fieldbus communication system with dual microprocessor and serial connection - User interface with 7” touchscreen and mechanical keys for machine operation, ensuring reliable, simple, and intuitive use as well as real-time monitoring of all cutting parameters Scope of supply: - Shark 350 NC/CNC HS comes as standard with swarf conveyor - Bi-metal saw band, tool kit - Mounting adapter for infeed roller conveyor - Material chute for removal of short offcuts - Forklift/pallet truck access Machine available from stock, subject to prior sale

Leto izdelave: 2025, Stanje: kot nova (razstavni stroj), Granulator MVZ 7.5 kW Demonstration machine available at special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts and for size reduction of wood chips. Further details available after testing with your material. Our granulators are used for processing a wide range of materials, such as plastics or wood. Shredders and granulators are suited for numerous size reduction applications. For example, defective parts and sprues from injection molding machines that need to be recycled. At the blow molding machine, in addition to defective parts, flash and start-up waste from hoses are processed. Materials such as blow-molded PET bottles, PE/PP bottles, canisters or buckets, and pipes can be processed. The material is fed from above via a hopper into the granulation chamber. The rotor inside is equipped with cutting blades. Material is shredded between the rotating blades and the stationary knives mounted in the chamber housing until it falls through the screen located below the rotor as defined regrind. *Option: The regrind is usually conveyed pneumatically into big bags, silos, or other containers. The price applies only to the granulating plant as shown in image 1. Fan, cyclone, and filter available as options. --- Technical data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger units available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *extremely dependent on screen size and material Application example: PE 1000 plastic size reduction Feed material: approx. 40 mm chip length Secondary grinding down to approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) For G 30 wood chip secondary processing, much higher throughputs are possible – up to a maximum of 400 kg/h with a 10 mm screen (metered feeding e.g., via conveyor or auger). Further details after testing with approx. 30 kg. Rotor diameter: 180 mm 6 rotor blades, each 225 mm 4 stationary blades, each 225 mm Dimensions: 930 x 730 x 1420 mm Weight: 450 kg Extraction connection: 100 mm Screens: 6, 8, and 15 mm – further screen options available Price per screen: €390 Spare blade set: €679 Suitable for: - Plastic waste of all types Various materials: HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs etc. Parts from injection molding, blow molding, scrap from injection molding, small bottles, cables, small pipes, profiles, etc. --- Larger systems available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *depending on screen and material Feed opening: 620 x 400 mm Special net price: from €24,995 net *optionally with matching extraction/conveying system Granulator MVZ / 30 kW Throughput up to 400 kg/h *depending on screen and material Feed opening: 620 x 500 mm Special net price: from €29,795 net *optionally with matching extraction/conveying system --- For configuring the machine, the following information is required: - Length x width x height of the feed material? Lsdpfsd N Dn Djx Agwsru - Screen size, final particle size required (mm)? - Required throughput per hour (kg)? - Wall thickness (mm)? - Material description Photos are also helpful

Stanje: dober (rabljeno), Razpon rezanja okroglega jekla pri 45°: 250 mm, Obseg rezanja okroglega jekla pri 90°: 280 mm, največja višina reza: 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity at 45º: 250 mm round 250 mm square Saw speed: 40/80 m/min Saw blade: 3,320 x 27 x 0.9 mm Ljdott Nd Ropfx Agwjru Miter angle: 0 - 60º Equipped with: - Coolant system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine dimensions (LxWxH): 190 x 120 x 135 cm

Stanje: novo, MEP SHARK 281 CCS Metal Bandsaw with Semi-Automatic Descent. Item Number: SH281CCS Motor Power 1.5/1.8 kW Throat Opening 285 mm Blade Dimensions 2950x27x0.9 mm Weight 375 kg Cutting Speed 36/72 m/min Cutting Capacity 0° 250 / 230x230 / 280x200 mm Cutting Capacity 45° right 190 / 180x180 / 180x180 mm Cutting Capacity 45° left - Cutting Capacity 60° right - Ledpfx Agjcgbp Iowsru Cutting Capacity 60° left - Description: - Saw bow, vise unit, and base made from robust cast iron - Precision angle indicator integrated into the cast iron frame - Electrical system (with fully identifiable wiring and low-voltage system 24 V) - IP 55 selector handle for manual operation (where applicable) - Rotating chip brush for the saw blade - Quick-closing device with vise for rapid approach - Precise stops with settings for mitre cuts at 0°, 45°, and 60° to the left - Bi-metal saw blade 2950 x 27 x 0.9 mm - Tools, operating instructions, and spare parts list in the user’s language - SHARK 281 available with manual feed; SHARK 281 CCS with manual operation and automatic cutting via gravity feed - CCS (Cut Control System) functions: (A) Switch for manual and automatic cut, (B) Adjustable cutting speed, (C) Hydraulic brake with reservoir, (D) End stop for halting the blade – also available as an option for existing machines - Quick-set vise - Hydraulic converter for blade tension display - Electric coolant pump for band lubrication and cooling, with accessible coolant tray above the base frame - MA versions with pneumatic vise: opening and closing via manual valve (optional pedal control available) MEP SHARK 281 SXI evo [Semi-Automatic] Item Number SH281SXI Motor Power 1.5/1.8 kW Throat Opening 285 mm Blade Dimensions 2950x27x0.9 mm Weight 435 kg Cutting Speed 36/72 m/min Cutting Capacity 0° 250 / 230x230 / 280x200 mm Cutting Capacity 45° right 190 / 180x180 / 180x180 mm Cutting Capacity 45° left - Cutting Capacity 60° right - Cutting Capacity 60° left - Description Semi-automatic function: The vise closes and the motor starts, the saw head descends to perform the cut, then the motor stops, the head raises, and the vise opens automatically. Key Features: - New, centralized control panel mounted on an articulating arm - Latest generation hydraulic control unit, highly efficient with low energy consumption - Base frame with removable coolant tank The machine complies fully with all CE regulations! Please refer to the attached PDF document for further technical specifications.

Stanje: novo, Leto izdelave: 2025, Dealer wanted! Commodity code: 84659600 Hopper dimensions (mm): approx. 630 x 810 Hopper volume (m³): approx. 0.6 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Blades: 30 pieces, multiple cutting edges (reversible) Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Throughput capacity depends on material. Approx. 1–5 hopper fillings per hour Hydraulically operated pusher Screen perforation: as required (10–40 mm) Extraction port: Ø 160 mm Weight: approx. 1,200 kg Dimensions (LxWxH): approx. 1,750 x 1,200 x 1,640 mm Standard equipment includes: - Robust, folded machine base - High-performance gearbox Lredpfxjvucbze Agwju - Intermittent hydraulic pusher - V-belt drive - Automatic star/delta start - Automatic shut-off when rotor runs idle - Rotation speed 70–90 rpm for high throughput - Special guides for hydraulically operated pusher - Vibration-absorbing machine feet - CE compliant

Stanje: dober (rabljeno), Leto izdelave: 2002, Avtomatska tračna žaga MEP Lrodpfx Agew Na T Uowsu Model: Shark 320 AXI Leto: 2002 Kapaciteta okroglo: 260 mm Kapaciteta pri 45 / 60 stopinjah: 230 mm / 150 mm Kapaciteta kvadratno: 320 x 220 mm Hitrost: 40 - 80 m/min

Leto izdelave: 2003, Stanje: rabljeno, Cutting capacity – Round: 300 mm Saw blade dimensions: 3320 x 27 x 0.9 mm Cutting capacity – Rectangle: 330 x 260 mm Lredpfora Rrljx Agwju Cutting capacity – Square: 260 mm Control system: Evolution Working height: 870 mm Saw blade speed: 40 / 80 m/min Machine weight: approx. 1050 kg

Stanje: dober (rabljeno), Cassel Metal Shark detektor kovin Ledevzw Dqopfx Agwsru Če je zaznana kovina, se izhodni trak odpre (glejte video). Prehodna odprtina detektorja znaša 15 cm v višino in 65 cm v širino. Dimenzije stroja (D x Š x V): 1.700 x 1.300 x 2.250 mm

Stanje: novo, Cutting diameter: 250 mm Saw band length: 2950 mm Cutting width: 280 mm Saw band dimensions: 2950 x 27 x 0.9 mm Cutting area at 90 degrees - flat: 280 x 200 mm Cutting area at 90 degrees - square: 230 mm Cutting area at 45 degrees - round: 190 mm Cutting area at 45 degrees - flat: 180 x 180 mm Cutting area at 45 degrees - square: 180 mm Cutting area at 60 degrees - round: 120 mm Cutting area at 60 degrees - flat: 110 x 110 mm Cutting area at 60 degrees - square: 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.4 t Powerful mitre band saw for cuts from 0° to 60° to the left Lrsdpfx Agsppgddswju CCS (CutControlSystem) for automatic operation. (Infinitely variable feed rate adjustment and automatic shut-off at end of cut) Description: -Manual cutting cycle -AUTOMATIC CUTTING: (via selector switch) with stepless adjustment of lowering speed and adjustable cutting pressure via counterbalance spring -Sturdy, torsion-resistant, and low-vibration saw frame made from cast steel -Quick-release vice -Carbide blade guides for maximum cutting precision -Large, adjustable cast steel band wheels -Hydraulic unit for saw band tensioning and monitoring with manometer display (band tension = 900 kg) -Clearly arranged control panel with all operating elements -Electric coolant pump for cooling and lubricating the saw blade -Chip removal brush for cleaning the saw blade

Stanje: novo, MEP Bandsaw SHARK 331-1 NC 5.0 Spider All MEP models available on request! Motor power: 2.2 kW Vice opening: 340 mm Blade dimensions: 3650x27x0.9 mm Weight: 1,240 kg Cutting speed: 15 - 100 m/min, steplessly adjustable Cutting capacity at 0°: 280 / 260x260 / 330x260 mm Cutting capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting capacity at 45° left: — Cutting capacity at 60° right: 180 / 170x170 / 170x170 mm Cutting capacity at 60° left: — Description Fully automatic hydraulic bandsaw Mitre cuts up to 60° to the left possible Saw blade length: 3650x27x0.9 mm Single stroke: 600 mm (programmable up to 10m) Simple touchscreen operation Saw arm made from spheroidal graphite iron – robust and stable Space requirement: 3.4 m² Footprint: 1900 mm wide x 1800 mm deep For further technical data, please refer to the attached PDF document. Ledschhdiopfx Agworu

Stanje: novo, Leto izdelave: 2025, Commodity code: 84659600 Hopper size (mm): approx. 510 x 810 Hopper volume (m³): approx. 0.4 Motor: 15 kW; 400 V - 50 Hz - 3 ph Blades: 24 pieces, reversible Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Throughput capacity depends on material, approx. 1 - 5 hopper fillings/h Hydraulically operated pusher Screen perforation: as required (10 - 40 mm) Suction connection: Ø 160 mm Weight: approx. 1,000 kg Lrodpfx Aovucbnegweu Dimensions (LxWxH): approx. 1,750 x 1,100 x 1,640 mm Standard equipment includes: - Sturdy, bent machine stand - High-performance gearbox - Intermittently controlled hydraulic pusher - V-belt drive - Automatic star/delta start-up - Auto shutdown when rotor runs idle - Speed 70-90 rpm for high throughput - Special guides for hydraulic pusher - Vibration-damping machine feet - CE compliant

Stanje: zelo dobro (rabljeno), obratovalne ure: 1.170 h, MEP automatische Bandsäge Modell: Shark 310 AX Kapazität rund: 230 mm Kapazität rechteckig: 310 x 220 mm Bandabmessung: 2850 x 27 x 0,9 mm Lredpfxew Hy Hks Agwsu Betriebsstunden: 1170 Sehr guter Zustand

Stanje: novo, MEP SHARK 230-1 NC HS 5.0 Twin-Column Metal Band Saw Article no. SH230-1NCHS Motor power: 2.2 kW Vise opening: 235 mm Blade size: 2950x27x0.9 mm Weight: 1,000 kg Cutting speed: 15 - 100 m/min, stepless Cutting capacity at 0°: 230 / 230x230 mm Cutting capacity at 45° right: Lrjdpfechhfujx Agwou Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description: SHARK 230-1 NC 5.0, electrohydraulic twin-column fully automatic band saw with semi-automatic and fully automatic operation mode. Max. end piece length: 70 mm. Bundle cutting: 230 x 230 mm. Numerically controlled saw equipped with the new MEP 50 Windows-based controller. Material feed via stepper motor and ball screw, mounted on opposing ball bearings. Single stroke 500 mm – repeatable for any cutting length. Easy programming – simply enter cut length and quantity, then press "START". Electronic blade tension control. Automatic monitoring of cutting load via a servo valve mounted directly on the cylinder. Blade rotation monitoring with instant stop in the event of a jammed saw blade.

Stanje: novo, MEP SHARK 350 NC HS 5.0 Fully Automatic Double-Column Metal Bandsaw Article number: MEP SHARK 350 NC HS 5.0 Motor power: 4.0 kW Table opening: 355 mm Blade dimensions: 4640 x 34 x 1.1 mm Weight: 2,800 kg Speed: 15 – 115 m/min, stepless Cutting capacity 0°: 350 / 350 x 350 mm Cutting capacity 45° right: Cutting capacity 45° left: Cutting capacity 60° right: Lodpfxoi Hmcde Agwsru Cutting capacity 60° left: Description: Automatic hydraulic bandsaw in double-column design for 0° cuts in solid material and profiles made of steel, stainless steel, and steel alloys up to a maximum of 350 x 350 mm. Numerically controlled bandsaw, which can also be operated in semi-automatic mode, with the new MEP 50 CNC controller, specially developed by MEP for automatic machines, based on Windows-2 "CE" technology. Standard features include: - Powered swarf conveyor, installable on the right or left side of the machine - Vise clamping pressure regulation - Feeder with vertical rollers for lateral material support - Clamping pressure regulation - Storage for 100 programs - Machine available with 34 mm or 41 mm blade—no extra charge

Stanje: novo, MEP SHARK 332-1 CCS Metal Band Saw with Semi-Automatic Descent Authorized MEP Dealer – Please send us your inquiry! Motor Power: 1.5 / 1.8 kW Vice Opening: 335 mm Blade Dimensions: 3650 x 27 x 0.9 mm Weight: 640 kg Cutting Speed: 40 / 80 m/min. Cutting Capacity at 0°: 300 / 260x260 / 330x260 mm Lrjdpfjcgbt Rex Agwsu Cutting Capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting Capacity at 45° left: 200 / 180x180 / 200x160 mm Cutting Capacity at 60° right: 180 / 170x170 / 170x170 mm Cutting Capacity at 60° left: – Description – MEP Sawing Machine: CCS version operating principle: Once the material is positioned and the vices are closed, the cutting cycle is initiated. The descent is performed by gravity, counterbalanced by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is raised manually to the required position for material feed. Equipment features: - Electrical control panel (clearly marked wiring, ready status indicator, main safety switch with provision for padlock, speed switch/selector, emergency stop, thermal-magnetic protection, 24V low voltage system) - Electronic blade tension converter with display - Manual vice with quick-clamping - Base frame with coolant tray and chip drawer (can be replaced by a motorized chip conveyor – optional) - Electric coolant pump for band cooling and lubrication - Chip removal brush - Adjustable precision back gauge for repeatable cut lengths - Designed for pallet truck transport - Bi-metal blade for solid and profile material - Includes tools and user manual Motor: 1.5 / 1.8 kW 2 cutting speeds: 40 / 80 m/min Vice opening: 335 mm Blade: 3650 x 27 x 0.9 mm Weight: 640 kg For cutting data, see image. For further technical details, please refer to the attached PDF document.

Stanje: novo, MEP SHARK 382-1 SXI EVO Metal Bandsaw Hydraulic Semi-Automatic. MEP Authorized Dealer – please send us your inquiry Motor power: 1.5 / 1.8 kW Jaw opening: 385 mm Blade dimensions: 3770 x 27 x 0.9 mm Weight: 695 kg Blade speed: 40/80 m/min Cutting capacity at 0°: 300 / 250x250 / 380x250 mm Cutting capacity at 45° right: 260 / 250x250 / 300x200 mm Cutting capacity at 45° left: 240 / 210x210 / 280x160 mm Cutting capacity at 60° right: 180 / 170x170 / 200x170 mm Cutting capacity at 60° left: Lodpfx Aeg Hzxiogwjru Description Electro-hydraulic, semi-automatic bandsaw, featuring both manual and semi-automatic-dynamic operation, suitable for cutting from 45° right to 60° left. Key features: - Pivoting control panel on vertical support column - 420 mm large rotary table on roller bearings with preloaded thrust bearing and replaceable steel inserts - Two blade speeds (40/80 m/min)

Stanje: rabljeno, Rabljeno okroglo vibracijsko sito iz nerjavečega jekla proizvajalca Allgaier Process Technology GmbH (Nemčija), model D1200. Sito ima delovni premer 1200 mm. Enonadstropna izvedba in čistilni nivo z gumijastimi kroglicami. Centralni dovodni priključek ima premer 200 mm. Izhod na stranski steni z priključkom 145 mm. Centralni izpust končnega proizvoda ima premer 200 mm. Sito poganjata dva vibracijska motorja, vsak: 0,75 kW, 1000 vrt/min, 220-240/380-415 V, 50 Hz, 11,1 kN, Ex izvedba. Stroj je nameščen na podporni okvir iz nerjavečega jekla. Dodatna oprema: - gravitacijski detektor kovin znamke Cassel (D), model Shark 2, na podpornem okvirju iz nerjavečega jekla Lrodpfxoxlglhs Agweu - nosilni okvir iz ogljikovega jekla z iztočno cevjo iz nerjavečega jekla in metuljastim ventilom.

Leto izdelave: 2007, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 926-0167-02, The ScanWorks V5 offers the largest field of view currently available for a line scanner based on the latest state-of-the-art technology. The portable ScanWork scanning system combines the user-friendliness of portable CMM arms with the sophistication of Perceptron's scanning technology. The V5 is capable of capturing 458,400 points per second with a minimum point-to-point resolution of 12 microns. Further features of the V5 include: Wide field of view: 140 mm and 110 mm Projected rangefinder: Projects an accurate trapezoidal representation of the field of view and the optimal scan offset distance – enables users to become familiar with optimal scanning procedures. Dynamic range: Captures precise data on dark and reflective surfaces, eliminating the need for white powder sprays. The sensor is impervious to ambient light. This lightweight scanner (340 g) can rapidly record large, geometrically complex areas with direct integration into your PolyWork setup. Lredpfxefy Nzbj Agwju Advantages of non-contact SharkScan laser scanning: Non-contact laser scanning prevents damage to sensitive surfaces or deformation of thin or soft materials. Real-time inspection enables fast identification and correction of errors. Ideal for generating point clouds for reverse engineering (via PolyWorks Modeler).