Scm P 64 nakup rabljenega (579)

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding Fpodpfx Apsxqggcolsg SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. (We only respond to inquiries that include your full address and telephone number!)

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Fpsdpfoitvkujx Apljg Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!

Stanje: novo, Technical data: Working width mm: 1,350 Min./max. working height mm: 4 - 170 Abrasive belt width/length mm: 1,370 / 2,620 Main motor power kW: 18.5 with inverter Feed speed variable m/min: 3.5 - 18 Working units: 1st unit: "RA" helical grooved contact roller, Sh 86, diameter 160 mm 2nd unit: Combi: Rubber-coated sanding roller diameter 160 mm, 45 Sh Elastic electronic segmented sanding pad “MESAR” with 24 segments Version C: - Elastic electronic segmented sanding pad “MESAR” complete with: - Pneumatic cylinder (On/Off) for automatic engagement/disengagement of the sanding roller-sanding pad unit - Activation of segments via electronic control, which synchronizes their engagement with feed speed and adjusts the number based on workpiece geometry, enabling selection of more or fewer segments to the left and right of the workpiece. Versions 135: “MESAR 24” with 24 segments, segment width 55 mm, complete with B/24 workpiece sensing strip at the infeed Additional equipment: Roller table at infeed and outfeed for long workpieces Perforated table and conveyor belt Vacuum table with 4 kW (5.5 HP) electric fan integrated into the machine frame Oscillating blow-off unit 2nd unit Fpodpfehtuvrsx Apleg Touch screen 10.4” display with ‘eye S software integration’ PLEASE NOTE: IMAGES ARE SAMPLE PHOTOS OF A SIMILAR SD70!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Cutting length: 3,200 mm Cutting width: 3,200 mm Cutting height: 65 mm Saw blade diameter max.: 300 mm Main saw motor: 5.5 kW Scoring saw blade diameter max.: 160 mm Scoring unit motor power: 1.5 kW Air cushion tables: 3 pcs. (1 x 2500 x 500 & 2 x 1500 x 500 mm) Office version for panel optimization Clamping grippers: 8 pcs. Saw carriage height adjustment on THK guides Pressure beam with slots (through-feed) Side alignment device Fodpehvan Iefx Aplspg Pneumatic quick-change saw blade system Extraction connection diameter: 1 x 120 mm & 1 x 150 mm Installation dimensions (L x W): 5700 x 6000 mm Weight: approx. 2,500 kg INVERTER NEW Note on used machines: • Technical data may be subject to errors and prior sale. • All prices are ex-works, free loaded onto truck! • The machines have been cleaned and tested for functionality. • All machines are sold as viewed, with no warranty or guarantee. The buyer has the opportunity to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic adjustment of the scorer unit Automatic rip fence with adjustment via lead screw and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis, with fine adjustment. Angle detection system via magnetic strip and LCD display. Crosscut fence with 3 LCD displays Extendable support table with roller support Technical data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scorer blade diameter mm: 120 Panel cuts with extendable stop mm: 3200x3200 Saw blade tilt range degrees: 0° / +46° Max. saw blade cutting height at 90° mm: 150 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scorer speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scorer unit power Hz 50 kW: 0.75 Cutting width with rip fence mm: 1270 Weight approx. 1180 kg Used machinery notice: • Technical data subject to errors and prior sale. • Prices quoted are ex-location, free loading! • The machine has been cleaned and function-tested. • All machines are purchased as inspected, with no warranty claims whatsoever. Buyers are invited to inspect the machine at its location. • Special agreements are only valid in written form. Fpjdpfxeyftzks Aplog (We only respond to inquiries that include your address & telephone number!)

Stanje: novo, Equipment: 5-axis electronic control Swivelling control panel above the table Electronic adjustment of the scoring unit Automatic rip fence with screw adjustment and linear ball bearing guide On/off switch integrated in the trimming carriage “Quick Lock” squaring frame Longitudinal fence with LCD displays “Full Support” Sliding carriage with curved contact surfaces – 10-year warranty! Telescopic arm with linear guide with ball bearing carriage Technical Data: Main saw blade diameter mm: 550 Scoring blade diameter mm: 120 Fedscrnm Nopfx Apljpg Panel cutting capacity with extendable fence mm: 3200x3200 Saw blade tilting range degrees: 0 +46 Max. saw blade cutting height at 90° mm: 200 Max. saw blade cutting height at +45° mm: 130 Saw blade speed rpm: 2500, 3500, 5000 Scoring unit speed rpm: 8500 Dust extraction port diameter mm: 120 & 100 Main motor power Hz 50 / kW: 7.0 Scoring unit power Hz 50 / kW: 1.3 Cutting width with rip fence mm: 1500 Including the following OPTIONS: 570335 "Pro-Lock" system for quick clamping of the main saw blade with tool-free quick adjustment of the riving knife

Stanje: novo, Saw unit swivels 46° to both sides. Programmable, electric saw blade adjustment. Control unit with electronic display for saw blade tilt and height. Gray cast iron saw unit ensures torsional rigidity and vibration-free operation. Easy panel handling thanks to large squaring frame with roller. Telescopic fence with 2 professional flip stops. Outstanding cutting precision – sliding table guided by a highly precise, time-proven ball contact system for smooth operation. Scoring unit features its own drive and is easily adjustable from outside. Saw unit accommodates saw blades up to 400 mm diameter. Scoring blade diameter: 160 mm. Two-position manually adjustable saw blade pendulum guard. 3-axis control. Motorized parallel fence with electronic position control. Includes: - Position display via encoder - Adjustment via ball screw spindle - Stepless setting via switch or automatic positioning system - Incremental adjustment capability - Swiveling fence retraction below table - Cutting width 1270 mm - Programmed movement of motorized saw unit adjustment and tilting UP version: - Swiveling operator panel for maximum flexibility X version: - Compex miter fence for fast, precise miter cuts with automatic length compensation (length adjustment) - Outrigger with angle-adjustable telescopic crosscut fence - Optional degree scale division (Art.-No.: 5510403) - Longitudinal fence with 2 LCD position displays Fodpfx Aed Akygeplspg Options included: - Version with max. sliding table travel of 3200 mm - Integrated main and scoring blade start/stop switches on the squaring frame - Squaring frame with CompeX feature - Version “READY 3 UP” - 2 cutting speeds (3500/5000 rpm) Extraction port diameter: 120 & 80 mm Main motor: 7.0 kW, 400 V, 50 Hz Squaring frame length: 1200 mm Squaring frame width: 650 mm Sliding table length: 3200 mm Sliding table width: 360 mm Cutting width with parallel fence: 1270 mm Max. crosscut width left of blade: 3260 mm Saw blade tilt: -46 to +46° Max. cutting height 90°: 136 mm Max. cutting height 45°: 97 mm Max. cutting height -45°: 60 mm Main saw blade diameter: 400 mm Scoring saw blade diameter: 160 mm

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. Fpedpocuwptsfx Apljg – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Work table dimensions: 2500 x 780 mm Milling spindle diameter: 30 mm Swivel range of the milling spindle: +/- 45.50° Clamping length of the spindle: 140 mm Max. tool diameter under the table: 300 x 80 mm Spindle base overhang from table: 50 mm Extraction port diameter: 1 x 120 & 2 x 100 mm Fodpfxod Etkhe Aplopg Electrospindle motor power: 7.50 kW Electrospindle with inverter for speeds from 900 to 12,000 rpm Swiveling control panel with "Easy Touch 7" electronic control "Flex" milling fence with automatic adjustment via electronic control Spindle forward/reverse operation Extendable table support at the front INCLUDES OPTIONS: - "Fast" table insert with automatic adjustment via 'Easy' control - "LL" version with 2 cast iron table extensions, total length 2500 mm Note on used machines: • Technical data and prior sale subject to change and errors. • Quoted prices are ex-works, loaded free on truck. • The machines have been cleaned and function tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries with your full address and telephone number!)

Stanje: novo, Band saw in compliance with European safety regulations, complete with: - Reinforced grey cast iron table, tiltable - Balanced cast iron flywheels - Telescopic blade guard with rack and pinion - Blade tension indicator - Precise upper and lower blade guides - Cleaning brush on the lower flywheel - Sturdy aluminium fences - Max. saw blade width: 16 mm - Extraction below the table, mounted on the machine stand - Micro safety switches on the machine doors Work table dimensions: 600 x 520 mm Work table height: 900 mm Flywheel diameter (cast iron): 450 mm Flywheel speed: 700 rpm Fsdpfxsdibw As Aplspg Max. cutting height: 300 mm Max. cutting width: 440 mm Min./Max. blade length: 3690 / 3742 mm Min./Max. blade dimensions: 6 x 0.5 / 25 x 0.5 mm Three-phase motor: 3.0 kW, 50 Hz, 400 V Extraction hood diameter: 120 mm

Stanje: novo, Electric Heated Platen Press SCM Model: gs 6/90 30-13 Offer Type: New machine Fedpfofh Tmmjx Apljpg Technical Data: Dimensions of heating platens: 3000 x 1300 mm Number of platens: 2 pcs Maximum temperature of platens: 120°C Recommended operating temperature of platens: 90°C Number of press cylinders: 6 pcs Hydraulic pump motor power: 3.0 kW, 400 V, 50 Hz Pressing force: 90 t (900 kN) Diameter of press cylinders: 70 mm Number of levels: 1 Daylight opening (approx.): 400 mm Connected load: 26.0 kW, 400 V, 50 Hz Heating Platens: Electrically heated aluminium sandwich platens from ELKOM, Germany. Continuously adjustable up to max. 120°C, up to 150°C on request. Thermal insulation towards the press frame. Platens are mounted with special brackets to allow for necessary thermal expansion. Hydraulics: Compact hydraulic pump, integrated in the press frame, from HAWE Germany. 2-stage design for closing and pressure build-up phase. Hydraulic cylinders made of high-quality, tempered and ground steel with large diameter. Press Frame: The press frame is a heavy-duty, torsion-resistant, stress-relieved welded steel construction. Presses of the gs series can be loaded from all four sides. Press tables are constructed from welded HEA profiles. Precision machining of the assembly components is done on state-of-the-art CNC machines. Uniform and precise movement of the press table is ensured by rack-and-pinion and self-lubricating slide guides on 2 corners of the frame. Control: Side-mounted control panel with SIEMENS 7'' colour touchscreen Proprietary SCM software enables simple, intuitive operation. The following parameters can be programmed, called up, and changed: - Automatic calculation of maximum allowable hydraulic press pressure based on workpiece size. - Storage of up to 100 programs (temperature, specific pressure, pressing time, platen size) possible. - Direct hydraulic pressure setting. - Internet connectivity for remote maintenance service. - Electronic control of pressing time - Electronic monitoring of platen temperature - Automatic pressure recovery - Complete diagnostics and fault display with messages on the screen OPTIONAL EXTRAS: - Electronic flatness control (misfeeding monitoring) - MYLAR film for protection and easy cleaning of the electric platens - Surcharge for 120 t press force - ELKOM platens with gold anodising finish

Stanje: novo, DMC SD 90 RCS 135 Type “C-Plus” Technical Specifications Usable Working Width: 1350 mm Min./Max. Working Height (with fixed table): 4 – 200 mm Abrasive Belts: 1,370 x 2,620 mm Feed Speed: 3.5–18 m/min Working Units: • “MESAR 46” elastic electronic segmented sanding pad with 46 sectors (30 mm), complete with B/46 workpiece sensing bar at infeed • 1st Position: “RA” angled ribbed steel contact roller D=250 mm • 2nd Position: COMBI with rubber-coated sanding roller D=175 mm, 65 Shore • Floating pressure shoe at 1st position with pneumatic adjustment • 2 grooved rubber-coated pressure rollers at 2nd and 3rd positions • Oscillating blow-off device at 1st and 2nd units • Workpiece cleaning unit with rotating air nozzles Drive: • Motor 1st unit: 18.5 kW • Motor 2nd unit with inverter: 15 kW Table: • Fixed table, working height 900 mm • Infeed roller table for long workpieces • Outfeed roller table for long workpieces • Perforated table and conveyor belt, 50 Shore • Vacuum table with integrated electric fan 4 kW in machine base • Variable conveyor belt feed from 3.5–18 m/min (gear motor 0.75 kW) Control: • Electronic programming unit “Pro-Sand” • 10.4" touch screen display Fsdsd E Ixzspfx Aplspg • Door with inspection window on operator side for machines with 2 working units • LED interior lighting Note on used machines: • Subject to technical changes and prior sale. • Quoted prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines on location. • Special agreements are only possible in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: zelo dobro (rabljeno), Surface Planer, used Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Adjustable fence (tiltable), dimensions 1500x175 mm Motor power: 4.0 kW, 400 V, 50 Hz Cutterhead speed: 5000 rpm 4-knife cutterhead, diameter 120 mm Max. depth of cut: 8 mm Extraction port: Ø 120 mm Table height: 860 mm Hydraulic table lifting/lowering with foot pedal Digital cutting depth display Noise-reducing combs on the cutterhead Fsdpfx Apjy Emf Reljpg Star-delta starter Emergency stop button CE compliant Includes all documentation Knife setting gauge NEW V-belts NEW cutterhead bearings NEW planer knives Dimensions (L x W x H): 3000 x 950 x 1100 mm Weight approx. 900 kg Note on used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – free loading! • Machine has been cleaned and function-tested. • All machines are sold as seen and inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (We answer inquiries only with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Planing Width: 520 mm Min/Max Working Height: 3 - 240 mm Motor Power: 5.5 kW, 400 V, 50 Hz Cutterhead Speed: 4,500 rpm Cutterhead Diameter: 120 mm Number of Knives: 4 Thickness Table Dimensions: 520 x 850 mm Feed Speed: 6.5 / 10 / 13 / 17 m/min Extraction Port Diameter: 150 mm Electric height adjustment Handwheel for fine adjustment of thicknessing table height Spiral infeed roller Segmented pressure beam Under-table roller Undervoltage release Emergency stop switch Knife setting gauge NEW drive belts NEW ball bearings NEW planer knives Fodpfxey Egmue Aplepg Approx. dimensions (L x W x H): 1120 x 990 x 1000 mm Approx. weight: 600 kg Note on used machinery: • Subject to technical modifications and prior sale. • Prices quoted are ex location - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any claim to warranty. Buyers are welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to enquiries containing your address and telephone number!)

Stanje: rabljeno, Leto izdelave: 2023, Exhibition machine Garbsen CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and Milling Made for You! This numerically controlled machining center is equipped with a comprehensive range of milling and drilling tools to meet every woodworking requirement. Highly efficient – with drilling spindles up to 8,000 rpm and industry-leading technology, offering the most robust spindle on the market with over 1,000 maintenance-free operations. Fully equipped – the suction cups can be individually configured using the TV FLEX worktable to tailor the machine to any specific need. Easy and intuitive programming is ensured by the integrated Cad-Cam MAESTRO CNC software. User-friendly operation – the lowered machine frame allows for unrestricted access to the worktable at all times. The control cabinet and vacuum pump are integrated into the machine base, and in the PRO SPACE version, no additional safety measures are required. Support structure The supporting structure consists of an exceptionally sturdy monolithic steel base, heavily ribbed for maximum robustness. The extra-wide support was specially designed to ensure stability and consistent precision under all operating conditions. Floor anchoring is not necessary. The base provides a large and solid foundation for the moving gantry: the working unit is equipped with a balanced, stable, and resilient support to withstand the most demanding workloads, ensuring superior quality and increased accuracy. The moving portal is fabricated from a solid single piece that is anchored to the base and travels on prismatic guides with recirculating ball carriages of the highest quality. The working unit is attached and moves on Y and Z axes, also on prismatic guides with recirculating ball carriages. Motion for the lower moving unit (X axis) and the working unit along the gantry traverse (Y axis) is accomplished via rack and pinion drives with helical gears, providing higher tooth engagement for greater acceleration and increased speed along X and Y axes. The specially designed helical gearing greatly reduces wear on mechanical parts and ensures quieter operation. The vertical Z axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic load and withstanding high acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage, delivering extremely high finishing quality due to the elimination of vibrations. Movement along the X-Y-Z axes is performed by brushless motors powered by static inverters, offering: - Reduced processing times thanks to improved acceleration - Better positioning accuracy due to high-resolution encoders - No setup required upon machine start-up thanks to absolute encoders - Elimination of regular maintenance since the brushless system contains no brushes. Axis movement and all working elements are managed by... Fpjdpfeytrgzsx Aplsg

Stanje: rabljeno, Leto izdelave: 2000, Used machine Year of manufacture: 2000 Fpedpfx Apoy Nugdelog Special SCM guide system for the saw carriage. The arch-shaped interaction between the balls and running guides, as well as the hardened contact surfaces, ensure exceptional and consistent precision. The scorer can be easily swung in and out from the outside; a special plate allows for precise positioning. The fence is extremely robust and suitable for both rip cuts and angled cuts; rapid return to the starting position. The precise flip stops allow direct reading of measurements along the entire length. Table dimensions: 830 x 1200 mm Saw carriage: 1500 x 290 mm Cutting length: 1500 mm Saw blade tilt: 45° Max. main saw blade diameter: 300 mm Max. scoring saw blade diameter: 100 mm Max. cutting height at 90°: 95 mm Max. cutting height at 45°: 67 mm Saw blade speed: 4000 rpm Scoring saw speed: 8000 rpm Cutting width with parallel fence: 1000 mm Extraction port diameter: 100 mm Motor: 4 kW Weight: 425 kg Availability: short-term Location: Röllbach

Stanje: rabljeno, številka stroja/vozila: 008439, Delovno območje os X: 3100 mm Delovno območje os Y: 1300 mm Fjdpfx Aoyngzceplspg Delovna površina: z vakuumskimi konzolami Moč glavnega vretena: 8,5 kW Število krmiljenih osi: 4 osi Število mest za orodja: 18

Stanje: rabljeno, številka stroja/vozila: 008471, Delovno območje os X: 6360 mm Fpsdoywaf Uopfx Aplog Delovno območje os Y: 1680 mm Delovna površina: Z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 12 kW Število krmiljenih osi: 5 osi Število vrtalnih vreten: 10 Število mest za orodja: 36

Stanje: rabljeno, številka stroja/vozila: 008473, Delovno območje os X: 4900 mm Fpsdoywaf Iopfx Aplsg Delovno območje os Y: 1680 mm Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 12 kW Število krmiljenih osi: 5 osi Število vrtalnih vreten: 10 Število mest za orodja: 36

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Širokopasovni brusilni stroj SCM Sandya S600 RCS 110 | ODLIČNO stanje | Leto izdelave 2015 Naprodaj je visokokakovosten širokopasovni brusilni stroj proizvajalca SCM (Sandya S600 RCS 110) v zelo dobrem stanju. Stroj je popolnoma funkcionalen in takoj pripravljen za uporabo. Delovna širina: 1.100 mm Delovna višina: 4–170 mm Glavni motor: 15 kW Hitrost traku: 3–16 m/s Hitrost podajanja: 3–18 m/min Dolžina traku: 2.150 mm Jekleni kalibracijski valj R (Ø 140 mm) Kombinirana enota CS: Gumijasti valj (Ø 160 mm, 30 Sh) Elektronski segmentni brusilni čevelj (širina segmenta 30 mm) Leto izdelave: 2015 Zelo lepo ohranjeno, tehnično brezhibno Vse informacije brez garancije. Tehnični podatki po navedbah proizvajalca oz. prejšnjega lastnika. Pridržujemo si pravico do napak, sprememb in vmesne prodaje. Brez jamstva ali garancije. Fpodpfxey Hn U Aj Aplog

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: AA1/11510, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 19.250 h, moč: 7,5 kW (10,20 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, potovalna razdalja osi X: 3.080 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 280 mm, dolžina obdelovanca (maks.): 3.080 mm, širina obdelovanca (maks.): 1.200 mm, število osi: 3, število mest v zalogovniku orodij: 12, skupna višina: 2.346 mm, skupna masa: 4.000 kg, Oprema: CE označba, dokumentacija / priročnik, Ponujamo rabljeni obdelovalni center SCM Record 130, letnik 2000. Močnejša vakuumska črpalka 2050 m3/h. Rotacijska os Vector. Kotni menjalnik nastavljiv od 0 do 100 stopinj, HSK63. Vrtalna enota z 9 vreteni. Malo obratovalnih ur. Fodpoyzadrofx Aplopg Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Leto izdelave: 1995, Used machine Year of manufacture: 1995 Equipment and Technical Data: Fpjdpfx Apoy Ih S Rsleg Versatile copy router with extremely short setup times, both when switching from manual operations to automatic operations, as well as when changing between various automatic machining processes. The automatic template feed (consisting of a central copying roller and a pressure roller) was developed by SCM to automatically guide workpieces attached to a template past the milling tool. The automatic copying roller and pressure roller can be removed in seconds, making the machine available for single and custom manual production. Distance between tool axis and column: 915 mm Spindle stroke: 105 mm Table stroke: 180 mm Maximum clearance between table and spindle: 300 mm Tool holder: MK 2 Spindle speed: 10,000/20,000 rpm Table dimensions with extensions: 1510 x 1170 mm Motor power: 4 kW Template feed motor power: 0.14 kW Template feed speed: 1.5–12 m/min Number of adjustable turret depth stops: 6 Dimensions approx.: 1690 x1100 x 1890 mm Weight: 650 kg Availability: short-term Location: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 2000, Rabljeni stroj Letnik izdelave 2000 T 110 je mizna rezkalka SCM, kjer sta kakovost in ugodna nabavna cena optimalno združeni. Zgradba je izjemno stabilna. Za udobno upravljanje so vsi upravljalni elementi nameščeni v dosegu na sprednji strani stroja. Natančna nastavitev višine orodja je zagotovljena z mehanskim prikazovalnikom. Nagib vretena od -5 do +45 stopinj. Velikost mize 1000 x 750 mm. Vpenjalna dolžina vretena 140 mm. Previs vretena nad mizo 20 mm. Fodpfx Apoy Ih Tujljpg Hitrosti vretena 3000-4500-6000-9000-10000 obr/min. Maks. premer orodja, ki se lahko spusti pod mizo: 320 x 40 mm. Profilirno orodje maks. 250 mm. Motor 4 kW. Izvlečni priključek 120 mm. S 3-kolutnim podajalnikom. Teža 520 kg Razpoložljivost: takoj Lokacija skladišča: Röllbach

Stanje: rabljeno, Used Machine Features and Technical Data: Versatile copy router with extremely short setup times, both when switching from manual operations to automatic processes and when changing between various automatic machining operations. The automatic template feed (consisting of a central copying roller and a pressure roller) was developed by SCM to automatically guide workpieces attached to a template past the milling tool. The automatic copying roller and pressure roller can be removed within seconds, freeing up the machine for custom and manual one-off productions. Distance between tool spindle and column: 915 mm Spindle stroke: 105 mm Fpjdpfx Apoy Ih S Djljg Table stroke: 180 mm Max. clearance between table and spindle: 300 mm Tool holder: MK 2 Spindle speeds: 10,000 / 20,000 rpm Table dimensions with extensions: 1510 x 1170 mm Motor power: 4 kW Template feed motor power: 0.14 kW Template feed speed: 1.5 - 12 m/min Number of adjustable turret depth stops: 6 Approximate dimensions: 1690 x 1100 x 1890 mm Weight: 650 kg Availability: short notice Location: 63934 Röllbach

Stanje: rabljeno, Leto izdelave: 1994, Motor 6 / 7,5 kW s 4-valjnim podajalnikom, fiksne podajalne hitrosti. Razširitve hitrosti. Višina delovne mize: 920 mm. Nagib vretena: -10° do +45°. Največji izteg vretena nad mizo: 175 mm. Hitrosti vretena: 3250/6500-5000/10000 obr/min. Največji premer orodja: 250 mm. Teža: ca. 950 kg. Lokacija skladišča: Nattheim. Fpjdpfx Aew Enw Ieplsg