Štiristranski skobeljnik SCM PROFISET 60

SCM profiset 60

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: Codpfjt R T Hcex Afnopw - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stanje: rabljeno, številka stroja/vozila: 4/14242, Frank floor sanding machine FSR, used Motor power: 0.75 kW Voltage: 230 Volt 5 Amps, 50 Hz Machine no.: 4/14242 Codpfx Ajb Auu Rsfnepw Dust bag Location: Ex stock Bitburg

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10006565, Weinig Powermat 1500 Working width: 30 - 310 mm (with tool diameter 93-125 mm) Working height: 100 - 200 mm (with tool diameter 93-125 mm) Number of spindles: 6 Bottom spindles: 2 Right spindle: 1 Left spindle: 1 Cpsdpfx Aferq Ebfonow Top spindles: 2 Spindle arrangement: bottom-right-left-top-top-bottom Max. spindle speed: 8,000 rpm Spindle diameter: 40 mm Powerlock tool holder Incl. chamfering unit Separate motor for each spindle Electronic feed, incl. brake, infinitely variable 5-40 m/min. Durofer pointed-tooth feed rollers Short infeed table 1.2 m long with 2 powered rollers above the table Machine table surface hard-coated Manual lubricator pump WEINIG Comfort Set Control system: WEINIG MEMORY PLUS-SYSTEM CE marking Declaration of conformity

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1630, skupna masa: 7.800 kg, trajanje garancije: 6 meseci, moč: 85 kW (115,57 KM), Prodaja se kompletna proizvodna linija na osnovi briketirke Di Più BRIK MB100 (complete production line). Csdpfx Aewrp Emefnepw Generalno obnovljen stroj DI PIU BRIK MB100 (tovarniško obnovljen leta 2025), pripravljen za takojšnje delovanje. Stroj je namenjen visokozmogljivemu briketiranju. Primeren je za zahtevno industrijsko uporabo. Stroj ima za seboj približno 2.000 delovnih ur. Stroj je na novo obnovljen v tovarni Di Piu, zamenjani vsi vitalni deli, vsi kabli, električna napeljava, ter potrebna električna oprema. S čimer je stroj dan v stanje novega in ima 6 mesečno tovarniško garancijo proizvajalca Di Piu. Stroj lahko proizvaja brikete z luknjo ali brez, debeline 90mm do 110mm iz mehkega in trde lesa, okrogle ali kvadratne. Ogled stroja je možen v tovarni v Italiji: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italija Mehanska briketirka Di Piu BRIK MB100 je avtomatski stroj za stiskanje lesa, žagovine in drugih odpadnih materialov v lesne brikete. Idealna vlažnost vhodnega materiala je med 8 % in 12 %, velikost delcev pa med 1 mm in 12 mm. Tehnični podatki: -Kapaciteta proizvodnje: 1.300 – 2.300 kg/h (pri gostoti žagovine 160–200 kg/m³) -Premer briketa: 90 – 110 mm -Moč glavnega motorja: 75 kW -Skupna instalirana moč: 98 kW -Tlak stiskanja bata: 2.000 – 2.500 kg/cm² -Vertikalni polž z reduktorjem: 5,5 kW -Oljna črpalka: 1,5 kW -Oljna črpalka za zapiranje iztiskalne glave: 1,5 kW -Dozator s polžem in nastavljivo hitrostjo: 1,5 kW -Oljni sistem za mazanje bronastih ležajev: 100 litrov -Senzor za nadzor izhoda briketov (samodejni izklop ob izpraznitvi materiala) -Zaščitne obloge gibljivih delov -Senzor tlaka olja -Krmilna omarica -Zalogovnik za vhodni material (akumulator) -Senzor nivoja za nadzor napajalnega sistema -Teža stroja: cca 7.800 kg Stroj je opremljen z vsemi pripadajočimi dodatki za popolno delovanje in integracijo v linijo za briketiranje: DODATNA OPREMA – MB100: - Dozirni silo: Izdelan iz masivne jeklene konstrukcije. Premer: 1500 mm, višina: 1000 mm. Vgrajen ima rotacijski rezalnik z reduktorjem 2,2 kW, nameščen na robustno jekleno ogrodje. Dovajanje materiala nadzira senzor nivoja. - Linija za hlajenje briketov po iztiskanju, skupne dolžine 20 metrov - Avtomatska žaga za razrez briketov - Žaga samodejno reže brikete na dolžine, ki jih predhodno nastavi operater. - Naprava za proizvodnjo briketov z luknjo - Sistem za hlajenje glave stroja z ledeno vodo - Sistem proizvaja 50 litrov/minuto ledene vode za učinkovito hlajenje glave briketirke. - Zračno hlajen hladilnik vode z hermetičnimi spiralnimi kompresorji, mikroprocesorskim krmiljenjem in velikim rezervoarjem za shranjevanje energije, v katerem je potopljen izmenjevalnik toplote voda–hladilno sredstvo. - Izmenjevalnik toplote je visokoučinkovit tipa “fin-pack”, izdelan iz bakrenih cevi in aluminijastih lamel. - Rezervoar za vodo prostornine 800 litrov - Črpalka za dovod vode (50 l/min – 20 m.c.a. – 0,55 kW) s trikrožnimi ventiloma DN25 za uravnavanje temperature hladilne vode v glavi briketirke. - Digitalni elektronski regulator temperature povezan s senzorjem NTC (merilni element d.6 × 52 mm, IP68, AISI 316). DODATNO: NOVAPAC pakirka Možnost dodatnega nakupa pakirke NOVAPAC, ki je popolnoma kompatibilna s strojem Di Più BRIK MB100 in drugimi stroji, idealna rešitev za avtomatsko pakiranje neposredno po stiskanju. Letnik: 2013 Cena za Novapac: 19.000 € Oprema vidna na zadnjih 6 slikah

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, SCM Olimpic K 560 Automatski stroj za kantiranje, godina 2018 na prodaju! Kompletacija: - Lančani transport s brzinom 12/18 m/min - Debljina trake za kantiranje: 0,4–3 mm - EVA ljepilo - Jedinica za glodanje ploča "RT-V" - Jedinica za nanošenje ljepila „VC-S4.1“ - Jedinica za rezanje ruba "K-SEL" - Jedinica za glodanje ruba "R-K" - Jedinica za zaobljenje kutova "ROUND X" - Jedinica za struganje ruba RAS-K - Jedinica za poliranje SP-V Tehničke karakteristike: - Brzina transportera (dvije brzine) m/min: 12 - 18 - Minimalna/maksimalna debljina obratka mm: 8 - 60 - Debljina lijepljenog drvenog ruba mm: 0.4 - 6 (8 mm kod HP kompozicije) - Debljina lijepljenog rubnog traka mm: 0.4 - 3 - Maksimalna površina lijepljene trake mm²: 135 - Promjer nosača kalema („tanjur“) mm: 780 - Maksimalno preklapanje lijepljenog ruba u odnosu na obradak mm: 2+2 - Minimalni razmak između transportiranih komada mm: 600 - Minimalna duljina obratka (pri minimalnoj širini od 100 mm) mm: 140 - Minimalna duljina trake mm: 180 - Minimalna duljina drvenog ruba mm: 220 - Minimalna širina obratka (pri minimalnoj duljini od 210 mm) mm: 95 (60 mm opc.) - Širina produžetka stola mm: 560 - Visina radne površine od poda mm: 900 Jedinica za glodanje ploča „RT-V“: - Maks. površina skidanja odvarka mm²: 55 - Maks. debljina glodanja mm: 3 Cpodjw Sw Tkspfx Afnew - Minimalna/maksimalna debljina obratka mm: 8–45 (60 mm opc.) - Snaga motora kW: 2 x 1,5 - Promjer glodala mm: 100 - Visina glodala mm: 49 (64 mm opc.) - Brzina rotacije alata o/min: 9.000

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer Csdehlp D Nspfx Afnepw - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top.

Stanje: rabljeno, Leto izdelave: 2017, Number of spindles: 5 pcs. Working width: 240 mm Planing height: 120 mm Cpodpfx Aswwl Nlofnew Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight: approx. 3500 kg Control: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully checked. Brief summary: ----- - 5 spindles - Powerful motors - Left and top spindle electronically controlled for width and height - With workpiece return to the operator 1st spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system 3rd spindle ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic horizontal positioning / motorised width adjustment 4th spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick clamping system Electronic radial positioning / motorised height adjustment 5th spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return Including used planer heads as available. (Technical specifications according to manufacturer – no guarantee!)

Stanje: rabljeno, Length 2700 mm Width 1100 mm Height 850 ± 150 mm Motor power 0.37 kW Electrical power 0.5 kW Compressed air 6 bar Horizontal impregnation unit 'Pro flow' for individual parts with rinsing circuit. ----- Functional features: Machine for horizontal flooding of individual workpieces. The product is applied by a row of nozzles. Excess product is then blown off by air nozzles. The pump and air nozzles are automatically controlled and only operate when a workpiece passes through. This helps to reduce compressed air consumption. The recirculation mode ensures minimal product consumption. ----- Construction features: Structure Robust steel frame, coated with high-strength, water-soluble paint. Machine body made of hot-sealed, thick polypropylene panels. Four independent chambers for entry, flooding, air-blow, and exit. Horizontal feed of workpieces By means of motor-driven plastic rollers with grooves. Electronic frequency inverter for controlling and varying feed speed. Transmission The machine is fitted with an exclusive system whereby all gear mechanisms are located outside the flooding chamber and are easily accessible for the operator, guaranteeing longer operational life and facilitating maintenance. Moving parts are protected by cover plates and appropriate seals. Recirculation pump Pneumatic double-diaphragm pump with valves, seals, and diaphragms made from nitrile rubber, and a housing made of plastic material (PVDF). Air nozzles A blow-off system is installed in the first chamber to prevent product from escaping. A second blow-off system after the flooding chamber removes excess product from the workpiece. Electrical control panel Csdpfxjnl Nqqs Afnopw According to CE, protection class IP 55. Includes inverter for adjusting feed speed. Technical data Length mm 2700 Width mm 1100 Feed speed (min./max.) m/min 3-6 Drive group motor power kW 0.37 Installed electrical power kW 0.5 Distance between entry and exit rollers mm 2520 Working height (adjustable) mm 850 ± 150 Min. length of workpieces to be flooded mm 250 Max. width of workpieces to be flooded mm 300 Max. height of workpieces to be flooded mm 250 Compressed air consumption l/min 2000 Required compressed air pressure bar 6 Equipment and included accessories Rinsing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport ----- (Technical data according to manufacturer – without guarantee! Illustrations may differ from original. Prices net, plus VAT (domestic))

Stanje: novo, Leto izdelave: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle: Non-interchangeable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Spindle moulder with fixed spindle, tilting to one side, for tilt range from -5° to +45.5° Cpedpfxofpb Nms Afnew Positioning control for height and tilt adjustment, with zero point reset for height and offset travel Electronic position and speed displays 4 speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push-button for spindle start and stop Clockwise and counter-clockwise rotation Quick-release cutter clamping device Precision-planed grey cast iron table with rigid frame support Control panel mounted below on the rigid frame support Fence 216 with total adjustment via handwheel and LCD display, including cast fence plates and aluminium splitter plates Machine socket outlet Lockable main switch Mechanical motor brake Cutter guard and pressure device GAMMA V 1629 Curved fence 1639 Tapoa Spindle 30 mm, non-interchangeable CE compliant GS tested

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm Cpedpfx Asi Dfidsfnsw 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -