Scm P 64 nakup rabljenega (582)

Stanje: dober (rabljeno), Leto izdelave: 2017, EDGEBANDER WITH DIGITALLY CONTROLLED SETTINGS WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Workpiece height: 8 - 58 mm 10 to 45 mm with corner rounding unit in use - Panel length: 210 to 2500 mm - Minimum workpiece width: 90 to 1100 mm - Edge thickness (roll): 0.4 to 3 mm without corner rounding Duedpfxsrx S Ipo Aplet max 3 mm with corner rounding unit - Edge thickness (strips): max 6 mm without corner rounding max 3 mm with corner rounding unit - Edge width: panel thickness + 2mm each side - Feed speed: 11 m/min - Minimum workpiece gap: 600 mm - Panel overhang (relative to conveyor chain): 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Ø800 mm reel holder - Front workpiece support extension - Easy Size: digital positioning of infeed fence and workpiece passage height - Anti-adhesive spray unit - Edge trimmer (RT-V) 12,000 rpm - Infrared panel pre-heating at infeed - Glue unit (VC-VM) with interchangeable gluepot for granules, 1 kg capacity. Heat-up time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers incl. 1 motorised and timer-controlled roller - Tilting end trimming unit 0-20°, 12,000 rpm - Top/bottom flush trimming unit with digital position adjustment with copying system. 1/4 round (radius 2 mm) or chamfer cutter, 12,000 rpm - Corner rounding aggregate R2mm, 12,000 rpm with digital positioning - Top/bottom radius scrapers R1 & R2 mm with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (nebuliser) OTHER SPECIFICATIONS: - Trimmer motors: 2x2 kW - End trim motors: 2x0.19 kW - Height adjustment motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming motors: 2x0.65 kW - CE marking - Lockable mains switch, emergency stop buttons - Main power: 380V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 and 5x Ø80 mm Spindles: 780 m³/h Trimming 360 m³/h Scrapers 2x360 m³/h Max. operational floor space: 10.80 x 2.40 m Transport dimensions (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and schematics.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Powerful and versatile panel saw packed with extra features Sliding table with a 10-year warranty! - Anodized aluminum sliding table, running on hardened steel guides. - Crosscut frame complete with mobile aluminum fence for quick and accurate stop positioning for miter cuts. - Extended outfeed table - Emergency stop push button on the front of the machine and on the side of the parallel fence. - Overload relay - Overhead saw guard with built-in dust extraction Ø 80 mm - Automatic brake on main blade - Lockable main switch (control circuit 110 V) - Manual right-side fence with position reading via measuring scale, running on Ø 40 mm steel tube and with micrometric adjustment. - Cutting capacity against parallel fence: 1270 mm; Direct start of main motor - Three main blade speeds - Scoring unit with independent motor, featuring external setup and stop for quick repositioning of the scoring blade. The machine complies with CE standards. Dsdpsyglr Defx Aplout Optional equipment: - CompeX for miter cuts, integrated into the outrigger table for fast miter adjustments - Start/Stop switch at the end of the sliding table - Eccentric clamp - Crosscut fence with 2 LCD stops - Third LCD stop for crosscut fence

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, SCM krožna žaga, SI 400 EP NOVA z nagibnim listom in z valjčno mizo - Elektronsko upravljanje “READY” z dvema upravljanima osma Duedpfx Apsygll Rjlet Specifikacije: - Dvig in nagib žaginega agregata - Samodejna nastavitev višine glede na kot nagiba - Ročni, polavtomatski in avtomatski način z možnostjo shranjevanja nastavitev - Do 99 programov - Kalkulator in števec ur - Nastavitev podatkov orodja Dodatna oprema: - CompeX za kotne reze, integriran v nalagalno mizo, za hitro prilagajanje za kotne reze - Gumb Start/Stop na koncu valjčne mize - Ekscentrična spona - Prečni vodilnik z 2 LCD postajališči - 3. LCD postajališče za prečni vodilnik

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Stanje: popolnoma delujoč, dobro vzdrževan, v proizvodnji. Na voljo takoj! SCM SIGMA IMPACT 87 krožna žaga za razrez plošč, leto 2012, zmogljiva, natančna in zanesljiva industrijska žaga, zasnovana za visoko-produktivne potrebe v pohištveni in panelni industriji. Idealna za obrate za obdelavo lesa, proizvajalce omaric in obsežno proizvodnjo. Tehnične specifikacije Dimenzije reza: 3200 × 2100 mm Izvlek glavnega lista: 87 mm Premer glavnega lista: 350 mm Hitrost glavnega lista: 3900 obr/min Dujdpfx Aoycg Rmjplot Moč glavnega motorja: 5,5 kW Zarezni list: 1,5 kW, 6300 obr/min, 160 mm Hitrost vozička: 6–30 m/min Hitrost potiska: 27–38 m/min Standardna prijemala: 5 Priključki za odsesavanje: 3 × 120 mm ali 1 × 150 mm

Stanje: rabljeno, Leto izdelave: 1998, spodnji, desni, levi, zgornji, spodnji, univerzalni, delovna širina 220 mm, delovna višina 120 mm Dujdpexdw Udefx Aplst

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Iztočni sistem z 5,6 m dolgo in 270 mm široko transportno trak. Minimalna dolžina 400 mm, maksimalna dolžina 5000 mm. Čistilec s potiskom 500 mm. Nov krmilni sistem. Nov transportni trak. Nov reduktor za čistilec. Premikanje čistilca z motorjem/reduktorjem. Duodpfxeyfnbfo Apljt

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, premer gredi skobeljnika: 40 mm, Oprema: kabina, 7-vretena SCM profilirka: Maksimalna delovna širina: 230 mm Maksimalna delovna višina: 160 mm Hitrost podajanja: 5–40 m/min Premer vreten: Ø40 mm Konfiguracija vreten: 1. Spodnje: 5,5 kW 2. Desno: 5,5 kW 3. Levo: 5,5 kW 4. Zgornje: 5,5 kW 5. Spodnje: 5,5 kW 6. Zgornje: 5,5 kW Dsdpfx Apoyfm Ttjljut 7. Žage/spodnje: 22 kW Stroj je opremljen z nekaj deli in orodji, vključno s 4 novimi 6-nožnimi vreteni Ø163x240xØ40 ter enim kompletom orodja na stroju.

Stanje: rabljeno, številka stroja/vozila: 007691, Delovno območje os X: 2440 mm Delovno območje os Y: 1220 mm Dedpfxju Rigyo Apleut Delovna površina: nesting miza Število krmiljenih osi: 3 osi Število vrtalnih vreten: 11 Število mest za orodja: 8

Stanje: rabljeno, številka stroja/vozila: 006487, Delovno območje os X: 3060 mm Dusdpfx Aen Rzclopljt Delovno območje os Y: 1240 mm Delovna površina: Gnezdeči miza Moč glavnega vretena: 8,5 kW Število krmiljenih osi: 5 osi Število vrtalnih vreten: 18 Število pozicij za orodja: 16

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), USED AUTOMATIC FRONT-LOADING PANEL SAW Brand: SCM Model: SIGMA IMPACT year: 2006 CE compliant Max. cutting dimensions: 3200 x 3200 mm Cutting height: 67 mm 3 long and 2 shorter wide air tables 6 pneumatic clamps Duodshkr A Sjpfx Aplet Main saw motor: 10 HP Scorer unit PC with WINCUT software

Stanje: rabljeno, številka stroja/vozila: 008238, Delovno območje os X: 3660 mm Delovno območje os Y: 1550 mm Delovna površina: Nesting miza Dodpfxsx A E Tfo Apleut Moč glavnega vretena: 12 kW Število kontroliranih osi: 3 osi Število vrtalnih vreten: 12 Število mest za orodja: 15

Stanje: rabljeno, številka stroja/vozila: 008108, Maksimalna obdelovalna širina: 1050 mm Maksimalna obdelovalna dolžina: 2400 mm Djdsw Idduspfx Aplout Maksimalna obdelovalna višina: 250 mm

Stanje: rabljeno, številka stroja/vozila: 008132, Tip nameščene obloge: tanka obloga, debela obloga Dsdew Idc Ropfx Aplsut Leplilni sistem: EVA Spojno rezkanje: da Multifunkcijska enota: da Maks. hitrost podajanja: 18 m/min Maksimalna debelina plošče: 60 mm Delovni agregati: 7 kos

Stanje: potreben popravila (rabljeno), Leto izdelave: 2014, številka stroja/vozila: AA2/002546, število mest v zalogovniku orodij: 24, skupna masa: 6.600 kg, dolžina mize: 5.200 mm, širina mize: 1.300 mm, TEHNIČNI PODATKI Dolžina mize: 5.200 mm Širina mize: 1.300 mm Število rezkalnih vreten: 1 Tip rezkalne mize: nosilna miza Pozicije menjalca orodij: 24 PODROBNOSTI O STROJU Napetost: 400 V Dujdpjy Nybtsfx Aplet Poraba toka: 64 A Mere & teža Dimenzije (D x Š x V): 10.300 x 2.450 x 2.800 mm Lastna teža: 6.600 kg Transportni paketi: 1 OPREMA Vrtalno orodje Vakuumska črpalka Orodja Vakuumska črpalka Becker Vtlf 250: - Leto izdelave: 2008 - Glavna moč motorja: 5,5 kW - Priključni premer: 70 mm - Brezoljna: Da Opomba: Stroj je potreben popravila. Obstaja težava s CAN-bus sistemom.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, številka stroja/vozila: AHH/157/00, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 12.500 mm, skupna širina: 2.400 mm, skupna masa: 4.000 kg, Oprema: CE označba, TEHNIČNI PODATKI Stroj ima naslednjo konfiguracijo: Dsdpjy Nxrdjfx Aplsut 1. Tip enote: predrezkalni agregat 2. Tip enote: lepilni agregat 3. Tip enote: pritisni valjčki 4. Tip enote: kapi agregat 5. Tip enote: grobi rezkalni agregat 6. Tip enote: agregat za zaoblovanje robov 7. Tip enote: radialni potegni agregat 8. Tip enote: ravni potegni agregat 9. Tip enote: krtačni agregat PODROBNOSTI STROJA Napetost: 400 V Poraba toka: 36 A Varovalka: 63 A Moč: 14,4 kW Dimenzije in teža Dimenzije (D x Š x V): 12.500 x 2.400 x 1.900 mm Teža: 4.000 kg OPREMA Orodja CE označba

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: Dusdpfxjdd Hi Ej Aplot • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Dsdpfx Apjr A Eq Rolout Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: novo, Leto izdelave: 2023, Robust steel grey cast iron construction Milling spindle can be tilted backwards from 0° to -45° Dodoiknp Repfx Apljut Forward and reverse rotation of the milling spindle Large-sized milling unit made of grey cast iron, mounted directly to the table Solid and precise cast iron table Standard swing-type milling guard Aluminium sliding table with ball contact system Torsion-resistant, highly precise, smooth-running, and reliable in daily operation 10-year SCM warranty against wear on the guideways Milling spindle supported at the top with precision ball bearings for minimal bearing load and maximum service life Precise milling fence with rapid adjustment and fine adjustment with scale at the fence jaw Integrated extraction port Large milling table opening enables use of larger tooling Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Work table L x W = 1000 x 435 mm Table height 900 mm Sliding table length 1000 mm Sliding table width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle tilt 0° to -45° Usable spindle length 100 mm Maximum table overhang 130 mm Spindle speeds 3500/7000/10000 rpm Spindle diameter 30 mm Maximum retractable tool diameter 180 mm

Stanje: novo, Adjustment of infeed table using parallelogram system Chip removal display via graduated scale Simultaneous height adjustment and locking of work tables, complete with anti-tilt mechanism Quick conversion system for switching from surfacing to thickness planing (CE Version) Featuring a dedicated support for opening surfacing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic assistance "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hours counter Automatic star-delta starting for main motor Machine table with height adjustment via 4 steel threaded spindles Rubber-coated outfeed feed roller Interchangeable feed rollers Segmented pressure shoes at infeed Cutter block and setting gauge for planer knives Micro-safety switches for correct positioning of surfacing tables and extraction hoods Surfacing guard (CE version) Automatic motor brake on main motor Thermal overload relay Emergency stop switch Lockable main switch CE declaration of conformity Technical data: Usable working width [mm]: 520 Total table length [mm]: 2310 Cutter block diameter [mm]: 120 Motor power [kW]: 9.0 Hz 50, 400 V Cutter block speed [rpm]: 5000 4 knives [mm]: 35 x 3 x 520 Aluminium surfacing fence [mm]: 1200 x 190 Surfacing fence tilting from 90° to -45° Min./max. planing height [mm]: 3 / 250 Feed speed for thicknessing [m/min]: 5-8-12-18 Dedpfx Aod Akyzjplout Extraction hood diameter surfacing [mm]: 120 Extraction hood diameter thickness [mm]: 120 Including options: - "TERSA" cutter block with disposable reversible knives - Tiltable auxiliary fence for thin workpieces

Stanje: novo, Digital version with motorized thickness table adjustment • Helical-toothed steel feed roller for constant and uniform material feed • Material feed with two speeds • Extra-long surfacing tables enable easy and precise planing of workpieces • Work tables are made of stress-relieved, annealed cast iron—durable, distortion-free, and highly resistant • Surfacing tables open to the rear simultaneously for minimal setup times • The high machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical-toothed feed roller—ideal for efficient planing of precious timber Technical Data: Working width 410 mm Cutterhead diameter (mm) 95 mm Max. chip removal 5 mm Total surfacing table length 2200 mm Dedpfjdvn Hwox Aplout Thickness table dimensions 410 x 775 mm Thickness table feed speed 6/12 m/min Min./max. working height thickness table 3 – 240 mm Min. working length thickness 180 mm Motor power 5.0 kW, 400V, 50 Hz Including the following options: • Motorized thickness table adjustment with digital display • Fold-down auxiliary fence for thin workpieces • TERSA cutterhead system

Stanje: novo, Extra-long jointer tables (2250 mm) made from a single piece allow for easy straightening of workpieces. - Work tables are made of cast iron, stress-relieved and distortion-free, making them durable and consistently flat - Simultaneous opening & closing of the jointer tables with single-point locking - Powerful industrial motor - Fixed mounted extraction hood - Robust steel/cast iron construction Duedpfxecq E Uuj Aplst - Large fence 1200 x 150 mm (standard with auxiliary fence) - Material feed with four speeds via separate motor - Thicknessing table raised on four sturdy columns, protected by dust bellows - Helical gear infeed roller on the thicknesser - Rubber outfeed roller at the exit of the thickness planer - Preparation for slot mortiser attachment - Digital display for thickness height adjustment (accuracy 0.1 mm) - Automatic star-delta switch Technical Data: Total table length: 2250 mm Working width: 520 mm Max. depth of cut: 5 mm Thickness table dimensions: 850 x 520 mm Min/max. working height: 3/240 mm Feed speeds: 5/8/12/18 m/min Cutterblock diameter/planer knives: 120 mm/with 4 HSS knives Speed: 5000 rpm Self-braking motor: 400 V/50 Hz/S6 - 40 %, 7.0 kW Extraction port diameter: 1 x 120 mm Weight: approx. 650 kg Includes options: - "Teresa" cutterblock Ø 120 mm, monoblock, with 4 quick-release knives - Additional auxiliary fence for thin workpieces - Motorized height adjustment of thickness table with digital display - Thickness table with 2 swing-away idle rollers

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Djdjc S Di Ropfx Apleut Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: novo, Stable steel and cast iron construction High-precision sliding table made from anodised aluminium, with a travel distance of 2250 mm Maximum saw blade diameter of 315 mm, saw blade tiltable to 45° Large outrigger table (960 x 600 mm) with extendable aluminium telescopic fence up to 2660 mm Heavily ribbed jointer tables made of annealed, stress-relieved cast iron for decades of stability and flatness Helically toothed steel feed roller for consistent material feed Three manually adjustable spindle speeds Spindle moulder with forward and reverse rotation Three independent industrial motors Equipped with lockable main switch, motor protection switch, and emergency stop switch Jointer table width: 410 mm Jointer table length: 1810 mm Maximum depth of cut: 4 mm Thicknessing table length: 605 mm Thicknessing table width: 410 mm Minimum working height: 3 mm Maximum working height: 230 mm Feed speed: 7 m/min Maximum depth of cut: 4 mm Extraction port diameter: 4 x 120 mm Planer cutter block type: TERSA (3 pcs) Cutter block diameter: 72 mm Speed: 5200 rpm Panel saw cutting length: 2250 mm Cutting width with rip fence: 900 mm Maximum crosscut width left of saw blade: 2310 mm Saw blade tilt: 90 – 45° Maximum cutting height at 90°: 90 mm Maximum cutting height at 45°: 63 mm Saw blade diameter: 315 mm Saw blade speed: 4000 rpm Sliding table and work table Sliding table length: 2600 mm Spindle diameter: 30 mm Spindle speeds: 3500/7000/10000 rpm Maximum milling tool diameter, retractable/not retractable: 180/210 mm Drive motor power: 3 x 5.0 kW, 400 V, 50 Hz Machine weight approx.: 560 kg Dodsiiynnepfx Aplout INCLUDES OPTIONS: - Handwheel with gravity digital readout for thickness table positioning - Sliding table length 2600 mm - Professional fences - 'TERSA' planer cutter block - Spindle moulder with forward and reverse rotation

Stanje: zelo dobro (rabljeno), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration roller, steel 2nd Unit: Combination unit (roller 60 Sh, sanding pad with 2 inserts (hard, soft)) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotoric table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front & rear Sanding pad inserts fitted with new graphite cloth Includes nearly new abrasive belts Includes all documentation Note for used machinery: • Errors in technical specifications and intermediate sale reserved. • Listed prices are ex-works and free loading! • The machinery has been cleaned and function-tested. • All machines are sold as seen, with no warranty or guarantee whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only possible in written form. Dujdpfexqggcsx Aplet (We only respond to inquiries that include your full address and telephone number!)

Stanje: novo, Wide belt sander for calibration and fine sanding Working width: 1,100 mm Dsdpfjitvkusx Aplout Min./Max. working height: 4 / 170 mm Abrasive belt width: 1,115 mm Abrasive belt length: 2,150 mm Gear motor: 2.2 kW Feed speed: variable m/min Infeed and outfeed support rollers for long and short workpieces Oscillating belt cleaning blower 1st unit Oscillating belt cleaning blower 2nd unit Oscillating belt cleaning blower 3rd unit 10” touchscreen operating panel “eye-S” 1st unit: steel roller 2nd unit: rubber-coated calibrating roller 85SH 3rd unit: combination unit with pneumatic segmented sanding pad/rubber sanding roller 35 SH Motor power 1st unit: 18.5 kW Motor power 2nd & 3rd unit: 18.5 kW Version "B" for RRCS with: pneumatic switching on/off 1st unit pneumatic switching on/off 2nd unit pneumatic switching on/off 3rd unit “MESAR” elastic segmented sanding pad pneumatic switching on/off of the sanding pad unit electronic adjustment of working height SPECIAL PRICE! AVAILABLE IMMEDIATELY!