Tračni transporter

SCM Sweeper

Leto izdelave: 2026, stanje: novo, VKM – Destacking System for Milled Timber With our solution for separating milled timber, whether loosely stacked or in bundles, pre-milled timber pieces can be efficiently processed further. Using a two-stage system, the timber pieces are separated and made available for downstream processing. It is also possible to feed the separated timber pieces into a continuous process in a controlled manner. The infeed mechanism is mechanically engineered to reliably feed even warped timber. Additionally, it can be adjusted for timber diameter to ensure that only one piece is conveyed at a time, preventing bottlenecks and stoppages further down the processing line. Codog Rxhgepfx Agtsha

Stanje: rabljeno, Jeklena konstrukcija za dvigalne naprave Širina: približno 8,5 m Dolžina: približno 7,95 m Codpfx Aebruzgjgteha Naprava je razstavljena Naprava se prodaja »kot je«. Ogled: Vabimo vas, da si ogledate izdelek – preprosto nas kontaktirajte in se dogovorite za termin. Pozor: brez garancije, brez možnosti vračila ali zamenjave.

Stanje: rabljeno, Jeklena konstrukcija za dvigalo. Širina: približno 8,3 m. Dolžina: približno 5,1 m. Naprava je razstavljena. Cjdpfxebruzbs Agtjha Naprava se prodaja »tako, kot je«. Ogled: Vabimo vas, da si ogledate izdelek. Enostavno nas kontaktirajte in se dogovorite za termin. Opozorilo: brez garancije, brez možnosti vračila ali zamenjave.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, MARKON log house drilling machine with undercutter Year: 1990 Manufacturer: MARKON Lathi / Finland Dimensions: Length: 3550 mm Width: 1500 mm Height: 2910 mm Motor power: Drilling unit: 6 x 3 kW Moulding machine: 1 x 5.5 kW Workpiece dimensions: Max. height: 250 mm Min. height: 130 mm Max. width: 250 mm Min. width: 60 mm Min. length: 600 mm Tool sizes and speeds: Max. drilling diameter: 40 mm Moulding machine max. diameter: 250 mm Drilling length: 325 mm Drill arm diameter: 20h7 mm Drilling speed: 2,880 rpm Moulding machine speed: 2,880 rpm AIR Extraction ports Ø 160 mm (2 ports) Drilling unit extraction port diameter: 90 mm (6 ports) Air speed at extraction port: 30 m/s Air consumption: 8,460 m³/h Electrical connection: Total power: 380 V, 24 kW Chedofw Rt Repfx Agtea Compressed air connection: Min. pressure: 6 bar Air requirement per drilling cycle: 48 l, total air requirement ~2,200 l/min Includes 3.5 metre roller conveyor + 12 drilling tools

Stanje: rabljeno, Leto izdelave: 1996,

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, Dolžina: 10.400 mm / kos Dolžina valja: 1.000 mm Premer valja: 90 mm Razdalja med valji: 120 mm Cedpfjdbacvex Agtjha Teža cca: 1.800 kg Zaloga: cca 40 m !! Različne velikosti.

Stanje: novo, Enostavna serija škarjastih dvižnih naprav za pritrditev na dvigalo žerjava, namenjena dvigovanju panelov z uporabo žerjava, ki ga zagotovi stranka. Nosilnost 1 tona. Minimalna višina stenskega panela: 2000 mm Maksimalna višina stenskega panela: 3500 mm Upravljanje z enim človekom Codpefqmtkefx Agtjha Teža enote: 80 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, moč: 200 kW (271,92 KM), skupna masa: 7.500 kg, Večlistna žaga MEBOR linija z dvema bobnoma, model Mebor VC700, leto izdelave 2016. Zelo dobro delujoča! Skoraj kot nova. Chjdsy Sganepfx Agtea Večlistna žaga vsebuje: 1- Avtomatski dovozi transporter z valji za samodejno pozicioniranje 2- Nakladalna rampa 3- Izvozniški stroj z razvrščanjem levo-desno

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Number of spindles: 5 pcs Working width: 250 mm Planing height: 160 mm Length of surfacing table: 2500 mm Feed motor: 4 kW Feed speed: 6-24 m/min Controller: K2 Basic 7" touch screen KUPER SWT XL-5 AUTOMATIC MOULDER AND PLANER ----- AS NEW, DEMO MACHINE! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm, spindle 4.5 up to 8,000 rpm - Width and height positioned by motor: left spindle radial upper spindle axial - Feed carriage positioned by motor - Additional motorised positioning: right spindle radial and axial left spindle axial - Working width: 250 mm Csdpfxjwgwmno Agteha DETAILED TECHNICAL DATA ----- Working width (with tool diameter 125-163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Min. workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Machining of workpieces depends on the following operating parameters: Material, wood moisture, tooling, cutting depth taken off, and feed speed. Adjustments to operating parameters may be required if necessary. SPINDLE CONFIGURATION ----- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable tool length: spindle length minus approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to planing head Important: unit cannot be operated without jointing rabbet cutter Extraction nozzle D = 125 mm Tool clamping system: quick-change nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT ----- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP ----- Siemens IE3 motor with inverter brake 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4,000–6,000 rpm Tool diameter: 112–200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction nozzle D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: quick-change nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM ----- Siemens IE3 motor with inverter...

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 000247, GLUESTREAM PU-300 1C GLUING MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE Pre-owned machine, in nearly new condition • Maximum gluing width: 300 mm Chedot Nfarspfx Agtoa • Gluing head divided into 3 combs, each 100 mm, individually controlled by solenoid valves • Glue bead spacing: 10 mm • Tray with anti-stick liquid automatically closes combs when the machine is not dispensing • Adjustable glue output: 100 to 200 g/m² as required • Gear metering pump • Suitable glue viscosity range: 10,000 to 30,000 mPas • Feed speed: 7 to 15 m/min • 200 l drum holder • PLC control with touchscreen display, KINCO brand • Manufactured by GLUESTREAM (Slovakia), assembled in Ukraine • CE compliant • Year of manufacture: 2021, assembly in May 2022. Like new, less than 200 operating hours WE ALSO HAVE THE HYDRAULIC PRESS FOR GLULAM BEAM PRODUCTION