Schaublin 150 nakup rabljenega (55)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff: 8459.6930 TECHNICAL SPECIFICATIONS Vertical Rectangular Table: - Usable surface: 740 x 200 mm - Number of T-slots: 2 - T-slot width: 12-H7 - Distance between T-slots: 120 mm Fixed Angle Plate Table: - Usable surface: 700 x 250 mm - Number of T-slots: 5 - T-slot width: 12-H7 - Distance between T-slots: 40 mm - Lateral travel: 250 mm total Universal Tilting Table: - Usable surface: 600 x 210 mm - Number of T-slots: 4 - T-slot width: 12-H7 - Distance between T-slots: 40 mm Hedpfx Asw Uc Npeb Ssw - Lateral travel: 350 mm total - Swivelling range on three planes, on either side: 30°- 45°- 30° Spindle Taper: - Horizontal spindle housing: ISO 30 (40) - Vertical milling head: ISO 30 (40) - Universal quick-change head: SV E20+ES20 Vertical Swivelling Range: Vertical milling head: 360° Longitudinal travel: Hand/automatic: 320/300 mm Vertical travel: Hand/automatic: 375/355 mm Transverse travel: Adjustment handle: 150 mm Quill travel: 60 mm Reading accuracy with micrometric vernier: 0.02 mm Main motor (kW/rpm): 1.5/1500 Feed motor (kW/rpm): 0.45/3000 Coolant pump motor (kW/rpm): 0.15/3000 Spindle speed: - 1st range (rpm): 58-375 - 2nd range (rpm): 330-2000 Working feeds - longitudinal or vertical (mm/min): 12-400 - 10 feed rates (mm/min): 12-18-26-38-57-85-125-185-270-400 Rapid traverse (mm/min): Longitudinal or vertical: 1200 Subject to errors or omissions, the technical data is provided without guarantee.

Stanje: pripravljen za uporabo (rabljen), Table clamping surface: 1100 x 255 mm Table travel X-axis: 700 mm Table travel Y-axis: 250 mm Table travel Z-axis: 430 mm Spindle speeds: 38 - 1500 rpm Feeds longitudinal and cross: 12 - 1000 mm/min Vertical feed: 1.75 m/min Electrical connection: 380 V, approx. 4 kW Space requirement: 1700 x 1600 x 1650 mm Hedpfx Ajv Dh Irob Sow Weight: 1650 kg

Stanje: rabljeno, Manufacturer: Schaublin In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, illustrated tools, and clamping devices are only included in the scope of delivery if explicitly stated in the additional information. Hedpfx Abew A Ap Ts Sow Technical data and information are subject to change and errors excepted. Prior sale reserved.

Stanje: dober (rabljeno), Leto izdelave: 1998, Schaublin 65 TM-3 Hsdpfexf D S Esx Ab Ssw Dolžina 2800, širina 1700, višina 2150 Motor 27 kW Vključuje, kot je prikazano na sliki Transporter odrezkov Vpenjalna glava Fanuc 18i-T

Stanje: rabljeno, Ročna ročica stružnica SCHAUBLIN tip 102 Mehanična stružnica Št. stroja: 208322 Leto izdelave: ca. 1970 Celotna dolžina postelje: 650 mm Višina konic nad posteljo: 102 mm Višina konic nad suportom: 53 mm Srednja hitrost vretena: ca. 2.800 obr/min (3 stopnje) Pogonski motor: 0,37 kW, 2.800 obr/min Priključek na omrežje: 380 V, 50 Hz - Ročna ročica za zarezovanje in odrezovanje s precizno nastavljivimi omejitvami - Nosilec nožev z natančno nastavitvijo višine - Vpenjalna kleščna naprava (na voljo samo ena klešča) Hjdow Iq Umspfx Ab Sew - Menjava vrtljajev s prelaganjem pogonskega jermena Prostorske zahteve s podmizjem: D x Š x V 1150 x 600 x 1200 mm Teža s podmizjem: 130 kg v dobrem stanju

Stanje: rabljeno, TECHNICAL DATA - Max. swing over bed: 270 mm - Max. swing over cross slide: 130 mm - Distance between centers: 440 mm - Spindle nose: CAMLOCK D1-3' - Max. bar capacity: 28 mm - Power: 7.5 kW - Spindle speed: 0–5000 rpm, infinitely variable - Travel X x Z: 180 x 400 mm - Working feed rates: 0–5000 mm/min, infinitely variable - Rapid traverse: 7500 mm/min - Power supply: 3-phase 380V 50Hz 14kW - Dimensions: 1700 x 1226 x 1660 mm - Weight: 1415 kg EQUIPMENT Hsdpfx Ajuhcarob Sew - FANUC 20-T CNC control - Multifix 'A' quick-change tool turret - SCHAUBLIN B32 collet chuck - Tailstock with handwheel - Coolant tank with pump

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2004, številka stroja/vozila: 350735, Country of manufacture: Switzerland Voltage: 400V Net weight: 1570 kg Customs tariff number: 8458.1120 External dimensions: 1830 x 1260 x 1700 mm TECHNICAL DATA Capacities Max. turning diameter: Ø 270 mm Max. permissible diameter over cross slide: Ø 115 mm Centre height above cross slide: 60 mm Turning length B32: 265 mm Headstock: A2-4 Spindle for Schaublin collets: W20 / W25 / F38 / B32 Spindle speed, stepless: 50 - 5,000 rpm Spindle bore (without clamping key): 39 mm Max. bar capacity in W20 collet: 14.5 mm Max. bar capacity in automatic chuck: 32 mm Max. recommended turning diameter: 200 mm Pneumatic clamping Adjustable axial clamping force, force at 5 bar: 1,150 daN Cross slide Cross travel, X-axis: 180 mm Resolution, X-axis (at radius): 0.0005 mm Drive by AC motor, continuous/intermittent torque: 4 / 14 Nm Hjdpfohr Rtnex Ab Sow Ball screw, diameter x pitch: Ø 20 x 5 mm Longitudinal travel, Z-axis: 390 mm Resolution, Z-axis: 0.001 mm Drive by AC motor, continuous/intermittent torque: 4 / 14 Nm Ball screw, diameter x pitch: Ø 32 x 5 mm Feeds Working feeds, X- and Z-axis, stepless: 0 - 5 m/min Rapid traverse, X- and Z-axis: 8 m/min Feed forces, X- / Z-axis, stepless: 503 / 503 daN Tool system: Turret Standardised tool holder mounting: VDI 20 Number of tool stations: 8 Number of stations for driven tools: 4 Drive by AC motor, continuous/intermittent: 0.55 / 1.1 kW Spindle speed, stepless: 30 - 5,000 rpm Max. tool cross-section: 16 x 16 mm Integrated coolant supply and indexing in both directions: yes Coolant Tank capacity: 55 L Pump delivery rate: 10 L/min Pressure: 1.7 bar Pneumatic tailstock Quill taper: Morse 3 Quill outside diameter: 45 mm Quill stroke: 70 mm Adjustable support force: 25 - 260 daN Centre height from floor: 1,162 mm The technical data is provided without obligation and subject to errors or omissions.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, High-precision leadscrew lathe Schaublin 102N-VM Technical data: >> Machine no. 283152 >> Centre height: 102 mm >> Distance between centres: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 mm to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock taper: MK2 >> Spindle speeds: 270–3000 rpm, stepless >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck with 2 sets of jaws >> Toolholder with 6 insert pockets Hjdpfowvq Tmox Ab Sjw >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Tool bits, drill chuck (see pictures) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The 102VM also runs quietly at high spindle speeds. The gear set for thread cutting is included, although it may not be complete. Take the opportunity to inspect the machine under power on site and see its excellent condition for yourself.

Stanje: rabljeno, Premer struženja nad posteljo: 310 mm Premer struženja nad sani: 160 mm Krmiljenje: BOSCH CNC ALPHA 2 Razdalja med konicami: 340 mm Višina konice: 148 mm Hitrost vretena: 3.000 min⁻¹ Hedsw Sx Ucjpfx Ab Sow Os X: 220 mm Os Z: 400 mm Po naši oceni je stroj v dobrem rabljenem stanju in ga je mogoče po dogovoru pregledati pod napetostjo. Pribor, prikazano orodje in vpenjalna sredstva so vključeni v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter do vmesne prodaje!

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), Rated power: 24 kW. Hedpfxjng E Tyo Ab Ssw

Stanje: kot nova (razstavni stroj), Schaublin lunette steady rest bracket 102VM Hjdpfxokw Drzs Ab Sow

Stanje: rabljeno, TECHNICAL DATA - Strokes: 320 x 150 x 375 [mm] - Distance vertical spindle – table surface: 310 [mm] - Distance horizontal spindle – table surface: 410 [mm] - Spindle speeds (stepwise adjustment): 58–2000 [rpm] - Spindle taper: ISO 30 - Feeds: 12–400 [mm/min] - Rapid feed: 1200 [mm/min] - Power supply: 3 x 380 [V/50 Hz] - Motor power: 1.5 [kW] - Total installed power: 2.1 [kW] - Machine footprint: 1500 x 1100 x 1600 [mm] - Machine weight: approx. 700 [kg] Hjdpfouhbw Nox Ab Sew ACCESSORIES - Swivelling vice - Coolant system

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 341966, Country of Manufacture: Switzerland Voltage: 400/50/3 Net Weight: 2640 kg Customs Tariff Number: 8458.1120 Dimensions: 2301 x 1438 x 1676 mm TECHNICAL SPECIFICATIONS Capacities: Maximum turning diameter: 330 mm Maximum diameter over cross slide: 160 mm Centre height over cross slide: 83 mm Maximum diameter over bed: 430 mm Turning length (depending on equipment): 650 mm Headstock: Standardised spindle nose for use with various collets and chucks via adaptation accessories. Collet accessories SCHAUBLIN: B45/F48 Maximum bar capacity, diameter: 36 mm/42 mm Automatic chuck, standard diameter: 170 mm Direct drive by AC motor, power at 100% / 50% ED: 15/18.5 kW Maximum torque at 100% / 50% ED: 135/165 Nm Maximum spindle speed: 5000 min⁻¹ C Axis: Pneumatic clamping cylinder: 2700 daN Hodpfxow T Smho Ab Ssw Cross Slide: Transversal travel, X axis: 240 mm Radial resolution: 0.0005 mm AC motor drive, nominal torque: 3 Nm Ball screw, diameter x pitch X: 32 x 5 mm Longitudinal travel, Z axis: 720 mm Resolution: 0.001 mm AC motor drive, nominal torque: 6 Nm Ball screw, diameter x pitch: 32 x 10 mm Feeds: Working feed rates X/Z axes, stepless: 0-5000 mm/min Rapid traverse X/Z axes: 8/10 m/min Feed force X/Z axes: 420/670 daN Turret Tooling System: Number of tool stations: 8 Standardised tool holder mounting: VDI 30 Max. size of turning tools: 20 x 20 mm Integrated coolant supply Indexing in both rotational directions Coolant System: Reservoir capacity: 120 litres Pump flow rate: 10 l/min Pressure: 5 bar The technical data is provided as a guideline and is subject to change or correction without obligation.

Stanje: zelo dobro (rabljeno), The used SCHAUBLIN 120 VM precision parallel lathe is a Swiss-made manual lathe of medium/small dimensions, with a centre height of 120 mm, distance between centres of 600 mm, and a spindle bore of 25 mm. The machine is complete with feeds and various equipment, already equipped with an electrical cabinet and compliant wiring; tooling and condition as shown in the photos. Hsdpfowqxcfex Ab Sow

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Control: Fanuc Series 20-T Turning diameter: 330 mm Hedpfx Aowh U Dteb Sjw Bar diameter: 42 mm Turning length: 650 mm Spindle speed: 5,000 rpm 8-position turret Minimum quantity lubrication

Stanje: rabljeno, Centre height: 125 mm Centre distance: 500 mm Spindle speed: 45 - 3000 rpm Feed rate: 4 – 260 mm/min Spindle nose: Camlock D1-3" Tailstock taper: MT 2 Swing over bed: 250 mm Swing over cross slide: 120 mm Top slide travel: 100 mm Hjdpfxobzlgle Ab Sjw Cross slide travel: 180 mm Dimensions (W x D x H): 1500 x 850 x 1300 mm Weight approx. 950 kg

Stanje: dober (rabljeno), Centre height: 102 mm Centre distance: 450 mm Lead / feed shaft W20 collets available Spindle speed: approx. 210 – 3000 rpm Hjdscug H Sspfx Ab Sew Reduction gearbox Left-/right-hand rotation 2-stage drive L x W x H: approx. 1760 x 595 x 1230 mm Weight: approx. 650 kg Various "Schaublin 102" models in stock!

Stanje: rabljeno, TEHNIČNI PODATKI - glejte slike Hjdpfew Ihtyex Ab Sew

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 211433, teža obdelovanca (maks.): 1.200 kg, For sale is a Schaublin 135 lathe in good technical condition. The machine is fully operational and comes with accessories. All guides are in good condition and the machine is geometrically sound. Hodev Rxhispfx Ab Sjw The carriages run smoothly and evenly. The machine was overhauled in 2002 and has been regularly serviced according to the manufacturer's specifications. Take advantage of the opportunity to inspect this machine on site.

Stanje: rabljeno, Working Area Centre Height: 102 mm Centre Distance: - with standard headstock: 450 mm - with reduction gear headstock: 375 mm - over bed: 200 mm - over carriage: 120 mm Headstocks Spindle nose for collets type Schaublin W25 Spindle bore: 25 mm Collet capacity: 20 mm Reduction gear ratio: 1:5 Bed Height x Width x Length: 168 x 130 x 1000 mm Bed made of cast iron, trapezoidal profile like the 102 N lathe, and hardened and ground dovetail guideways. Carriage Maximum travel on the bed: 400 mm Tool carriage width – length: 80 – 194 mm Travel by hand adjustment: 90 mm Centre height over tool carriage: 20 mm Tool holder shank: 12 x 12 mm Cross slide width – length: 94 – 300 mm Travel by hand adjustment: 100 mm Saddle guide length on bed: 250 mm Hedpjbxkl Tsfx Ab Ssw Leadscrew Leadscrew for longitudinal turning and thread cutting, Ø 40 mm Leadscrew hardened, thread ground, pitch 4 mm Speed Range Spindle speed: 270 – 3000 rpm Longitudinal feed: 0.02 – 0.3 mm/rev Thread Cutting Maximum pitch with standard change gear set: 4 mm Machine plate for 20 metric pitches: 0.25 – 4 mm Machine plate for 25 imperial pitches: 80 – 6 tpi Tailstock Quill diameter: 30 mm Quill internal taper: 2 Morse Quill travel: 80 mm Coolant System Coolant tank capacity: 23 liters Net Weights Lathe on workbench: approx. 225 kg Lathe on pedestal: approx. 550 kg

Stanje: dober (rabljeno), Centre height: 102 mm Centre distance: 450 mm Spindle bore: 32 mm Reduction gearbox Hodpfxocpznho Ab Ssw Left/right rotation 2-speed drive Variable speed: 270-3000 rpm Knee-lever control Swing diameter over bed: 200 mm Spindle nose: W 20 Tailstock quill: MK 2 Dimensions (LxWxH): approx. 140x56x123 cm Weight: approx. 550 kg Accessories available Manual available Various "Schaublin 102" versions available in stock!

Stanje: rabljeno, TEHNIČNI PODATKI - Višina konice: 102 [mm] Hsdpjw Ihttsfx Ab Ssw - Največji premer nad posteljo: 200 [mm] - Razdalja med konicama: 470 [mm] - Tip vretenaste vpenjalke: W20 - Premer izvrtine: 20 [mm] - Prehod iz palice v vpenjalno glavo: 14,5 [mm] TEŽA IN DIMENZIJE - Potreben prostor: 1500 x 800 [mm] - Višina stroja: 1300 [mm] - Teža stroja: 500 [kg]

Stanje: dober (rabljeno), Right- & left-hand rotation with knee-type reversing switch 2-speed variable Headstock with reduction gear Cross slide with 90 mm travel Tripan tool holder 1 set of W20 collets 2 drawers Lamp 380 VAC Centre distance: 350 mm Centre height: 102 mm Turning diameter over bed: 200 mm Turning diameter over slide: 120 mm Spindle bore: 20 mm Spindle speed: 55 – 3000 rpm / stepless Tailstock quill: MT 2 Weight: approx. 500 kg Hjdpfxsd Htvds Ab Sew Machine dimensions (W x D x H): approx. 1300 x 600 x 1300 mm Various "Schaublin 102" models in stock!

Stanje: dober (rabljeno), Travels X / Y / Z: 475 / 330 / 280 mm Table size (W x D): 650 x 250 mm Quill stroke: 60 mm Spindle speed: 63 - 2800 rpm / 12 steps Spindle taper: ISO 30 / DIN 2080, ISO 40 / DIN 2080 Weight: approx. 950 kg Machine dimensions (W x D x H): approx. 1100 x 1400 x 1600 mm Spindle bore: 17.8 mm (24.8 mm) Range of movement: Longitudinal travel: Table: 330 mm* Per handwheel revolution: 5 mm Vertical travel: Knee: 475 mm* Per handwheel revolution: 2 mm Cross travel: Milling spindle headstock: 400 mm Hodpsd Dgdyefx Ab Sow Per handwheel revolution: 5 mm * Both of these movements are equipped with automatic feed and can be controlled via programs. Shortest cycle time: 15 seconds, i.e. up to 4 program sequences per minute. Scale drum reading accuracy: 0.02 mm Main motor: Milling head with 2 speeds Motor: 1.1/1.5 kW, 1500/3000 rpm Automatic feeds: Rapid traverse motor: 0.55 kW, 1000 rpm Rapid longitudinal feed: 2500 mm/min Rapid vertical feed: 1000 mm/min Feed drive motor: max. 0.2 kW Adjustment range longitudinal: 4 - 500 mm/min Adjustment range vertical: 1.6 - 200 mm/min Coolant system: Motor: 0.15 kW, 3000 rpm Coolant pump delivery rate: 20 l/min Coolant tank capacity: 30 l

Stanje: dober (rabljeno), Centre height: 130 mm Centre distance: 450 mm Speed: approx. 55–3000 rpm Pneumatic clamping system Spindle nose: W 25 Various W25 collets included Various holders included BERGER LAHR axis motors Hedpfx Abocuhvuj Sjw Combitec EIP E-500 control Control manual included Coolant system included Machine lamp included Machine feet included Dimensions (LxWxH): approx. 1400x560x1230 mm Weight: approx. 550 kg Various "Schaublin 102" models available from stock!