Ploskovni Brusilni Stroj nakup rabljenega (83.489)

Stanje: novo, Number of sanding units: 2 pcs Sanding width: 190 mm Maximum sanding height: 2–180 mm LÖWER double-sided sanding machine DSM 2000 ----- Double-sided single-piece wood sanding machine for sanding solid wood such as window timber, etc. Robust premium construction with long cast iron tables, brushing and finishing units, and conveyor belt feed. Suitable for high continuous loads, even with significant material removal. - Offset sanding and finishing units located above and below - Direct drive, rubber-coated sanding rollers for slip-free power transmission - Combination sanding with roller and pad for heavy stock removal with consistently flat engagement area - Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for cooler sanding and longer belt life - Forced, pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly on the sanding rollers, fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large-capacity dust extraction - Motorized sanding thickness adjustment via precision lead screws and large-scale linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustment of stock removal below via precision lead screw with scale ring (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed safety device via contact roller in case of oversized workpieces - Workpiece transport via calibrated, slip-proof and adhesive conveyor belts over heavy-duty 1000 mm long cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for jerk-free and consistent workpiece transport - Feed gear motor with three different feed speeds for quick adaptation to various wood types - All motors electrically protected - Ergonomically arranged controls on the workpiece infeed side - Automatic workpiece thickness detection (no prior measurement necessary) - Digital thickness display (resolution 0.1 mm) using modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 6, 11, and 16 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 120 mm and 2 x 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2105 mm - Length with control panel: 2490 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE compliant ----- Base price of the machine on request! Hodpfovu Hdtox Ah Donu ----- Optional accessories for additional cost: Infinitely variable feed 4–20 m/min for speed adjustment to ...

Stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, teža obdelovanca (maks.): 300 kg, dolžina brušenja: 2.000 mm, Used cylindrical grinding machine TOS BHU 32A/2000, grinding diameter 320 mm, grinding length 2,000 mm, without electrical components, in need of repair, ideal for companies specializing in complete overhauls. Hnjdswbiw Ijpfx Ah Dou

Stanje: kot nova (razstavni stroj), Leto izdelave: 2020, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 150 kg, dolžina brušenja: 500 mm, premer brusilnega koluta: 455 mm, premer brušenja: 300 mm, teža obdelovanca med konicami: 150.000 g, vrsta vhodnega toka: trifazni, premer obdelovanca med konicama: 500 mm, širina brusilnega kolesa: 75 mm, največja hitrost vretena: 500 obr/min, hitrost vretena (min.): 10 obr/min, moč motorja brusilnega vretena: 7.500 W, skupna masa: 4.600 kg, Demonstration CNC cylindrical grinding machine with automation preparation Brand: OKAMOTO Model: OGM-350 P NCIII Year of manufacture: 2020 Control: Fanuc Oi Model D Operating hours approx.: 200 h Technical Data: - Maximum swing diameter: 320 mm - Maximum distance between centers: 500 mm - Max. workpiece diameter to be ground: 300 mm - Max. workpiece weight between centers: 150 kg Hedpfxsxnvpns Ah Djnu - Max. workpiece weight (flange + chuck + workpiece): 40 kg Grinding Wheel: - Diameter x width x bore: 455 x 75 x 127 mm - Wheel speed: infinitely variable - Peripheral speed: 45 m/sec Grinding spindle head (X-axis): - Traverse path max.: 300 mm - Swivel angle: not swiveling Workpiece table (Z-axis): - Traverse path: 870 mm - Swivel angle: 0 – 10° Workpiece spindle head: - Design: fixed/following - Mounting taper: MT 4 - Spindle bore diameter: 20 mm - Spindle speed: 10 – 500 rpm - Swivel angle: not swiveling Tailstock: - Type: manual fine adjustment of taper - Quill stroke: 30 mm - Mounting taper: MT 4 Drive Power: - Grinding wheel drive: 5.5 kW - Total connected load: 20 kVA Dimensions/Weight: - Length x Width x Height approx.: 3400 x 2330 x 1950 mm - Machine weight approx.: 4,600 kg Standard Equipment: - Carbide centers, 2 pieces - Complete FANUC keyboard with radius compensation for creating ISO programs - Workshop programming, graphical software for grinding and dressing cycles with teaching function - GAP eliminator - Shoulder positioning - Constant coolant table rinse - LED lamp - Documentation - Leveling screws and foot plates - Operator tool kit Accessories: - Automation preparation - Automatic door - Automation interface - Complete grinding wheel guard when the door is open Miscellaneous: - Signal lamp - Tailstock with electric quill retraction - Flange: 1 pc - Grinding wheel: 1 pc Band filter: on request Clamping devices: on request Commissioning and training: on request (commissioning by Okamoto is required for warranty) Transport: on request

Stanje: dober (rabljeno), Leto izdelave: 2014, višina središča: 180 mm, širina na sredini: 600 mm, premer brušenja: 260 mm,

Stanje: dober (rabljeno), Leto izdelave: 1994, številka stroja/vozila: 20039, (Please state your offer price) Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. All warranties are excluded. Hnsdpfx Ahexma I Eo Dou We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, višina središča: 135 mm, teža obdelovanca (maks.): 70 kg, dolžina brušenja: 600 mm, premer brusilnega koluta: 405 mm, premer brušenja: 250 mm, moč motorja brusilnega vretena: 3.700 W, skupna masa: 3.200 kg, vrtilni razpon: 11 °, Stroj ima ciklični nadzor in je enostaven za uporabo, lahko izvaja različne avtomatske cikle, kot so grobo obdelovanje, fino obdelovanje in žganje, nima pa CNC-nadzora. Priloženi so brusna plošča, diamanti za oblačenje, hladilna naprava in enota za uravnoteženje. Transport in zagon na zahtevo. Stroj je mogoče pregledati pod napetostjo, je nov in je bil uporabljen samo za demonstracije, ne za obdelavo materialov. Hjdpfx Ahjxl Uc Ij Donu

Stanje: novo, Number of sanding units: 8 pcs Sanding width: 180 (260) mm Maximum sanding height: 160 mm Dimensions (L/W/H): 3065 x 1600 x 1900 mm Machine weight: approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (smoothing, defibering, and edge rounding) or intermediate sanding of profiled window bars. Featuring Softdisc technology for visible surfaces and automatic profile and width adjustment. - 2 lateral lamella roller units, each 0.75 kW, L=120 mm, D=200 mm - 1 upper Softdisc unit Ø=200 mm, 0.75 kW - 1 upper lamella roller unit L=200 mm, 0.75 kW - 1 lower Softdisc unit Ø=200 mm, 0.75 kW - 1 lower lamella roller unit L=200 mm, 0.75 kW - 2 lateral lamella roller units, each 0.75 kW, L=120 mm, D=200 mm - Linear guidance of all sanding units on linear ball bearing sets with hardened shafts - Timed immersion of all lamella roller units directly above the incoming workpiece edges. Immersion allows the units to be set deeper into the profiles. - Motorized workpiece thickness adjustment - Variable lamella roller speed via frequency inverter to adjust sanding intensity (separately for discs, surface rollers, and side rollers) - Disc units as Softdisc with hook-and-loop backing for sanding discs (wood sanding) - Feed via three lower and one upper conveyor belt and spring-loaded pressure rollers, continuously variable speed 4-15 m/min - Parameters adjustable via touch panel: workpiece thickness, workpiece width (left lateral units individually), immersion depth of lateral units, spindle speed, feed rate - Parameter storage as machine programs in program mode - Operation in automatic mode with non-contact workpiece width and profile recognition, as well as automatic positioning of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically indexed powered feed roller, automatic clamping of workpiece, feed after unit adjustment - Red/green signal lights indicate operational readiness - Minimum workpiece length: 380 mm - Conveyor belt width: 200 mm - Maximum workpiece width: 180 mm (260 mm with return processing) - Workpiece height: 12-160 mm - Extraction connection: 4 x 100 mm and 2 x 80 mm diameter - Sensor-controlled tool air blow-off directly at the discs - Length (housing) x width x height (mm): 3065 x 1600 x 1900 - Total length: 4365 mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400 V, 50 Hz, 3-phase, air supply: 6 bar - CE-compliant version ----- Price of the above-mentioned machine on request! ----- Hjdpfjvnv Uhsx Ah Donu Special accessories at extra charge: Set of replacement lamella strips for Leistomat SD-200, comprising: Surface units: - 30 strips EH45 / 200 - 7 (rollers) - 30 strips EH45 / 200 - 20 (rollers) Rebate units: - 96 strips M55 / 120 - 4 SmartFlex lamella disc Ø200 solid, with 30 slots, 50 mm long Set of replacement lamella strips for SmartFlex lamella disc, comprising: - 60 strips M35 / 50 K 180-7 S Sanding disc VB for Softdisc - D=200 mm, grit 220, with velour backing (hook-and-loop), pack of 100 pcs. Sanding disc VB for Softdisc - D=200 mm, grit 280, with velour backing (hook-and-loop), pack of 100 pcs. ----- ...

Stanje: novo, Experience unmatched precision and performance with ROBBI’s cylindrical grinding machines. Our machines offer grinding lengths starting from 600mm and are available in both semi-automatic and CNC versions. With a grinding diameter range of 300–1000mm, you have limitless possibilities. ROBBI Omicron 3606 in stock! Discover our comprehensive range of special accessories that make your cylindrical grinding machine even more versatile. Whether for complex workpieces or demanding tasks, our machines always deliver superior results. Rely on ROBBI’s years of expertise and let us optimize your machining processes together. Invest in quality and precision—contact us today! Our selection includes conventional or CNC-controlled machines with grinding lengths up to 2m (other models available on request): TECHNICAL DATA: Model Omicron CNC 60 or Semi-automatic Series Grinding diameter: 595/695 mm Grinding length: 1000 – 3000 mm Max. workpiece weight between centers: 1200 kg TECHNICAL DATA: Model Omicron CNC 36/32 or Semi-automatic Series Grinding diameter: 320 / 355 / 455 mm Grinding length: 630 – 2030 mm Max. workpiece weight: 120 kg (250/300 kg optional) CONVENTIONAL MACHINES: TECHNICAL DATA: Model Omicron E Series Grinding diameter: 360 – 430 mm Grinding length: 630 – 1530 mm Workpiece weight between centers: 200 – 300 kg ACCESSORIES (EXEMPLARY FOR OMICRON CNC 60): CNC control: Siemens 840D Glass scales: in X-axis Coolant system: with collection basin Wheel dresser: mounted on tailstock (without diamond) Telescopic cover: fabric cover for the table Machine oil: 5L for spindle Frequency inverter: for spindle and workpiece drive (infinitely variable) Hydraulic unit: for tailstock quill control Ball screw drive: in X and Z axes Optimized cycle with geometric and working parameters - The CNC grinding machines meet the requirements for machining medium-sized workpieces. - The machines are equipped with the latest generation SIEMENS 840Di sl system. - The machine can be fitted with automatic measuring systems. - The grinding wheel can be designed for specific geometries according to production requirements. - High-precision machining is possible when the grinding machine is equipped with a third interpolated axis and specially developed software. EASY PROGRAMMING Complex programs can be created without ISO programming knowledge. Parameter input is simplified through a series of messages and symbols that explain the meaning of each parameter step by step. Programming of operating cycles is carried out by entering the same cycle parameters. The sequence of different cycles can be changed quickly and intuitively. Hnsdpfx Aegay T Deh Deu Additionally, alongside affordable new machines and certified used equipment, we offer: • On-site consultation and solution development • Organization of transport to your facility • Installation, commissioning, and turnkey handover and much more.

Stanje: kot nova (razstavni stroj), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 150 kg, dolžina brušenja: 1.000 mm, premer brusilnega koluta: 455 mm, premer brušenja: 300 mm, teža obdelovanca med konicami: 150.000 g, vrsta vhodnega toka: trifazni, premer obdelovanca med konicama: 300 mm, širina brusilnega kolesa: 75 mm, največja hitrost vretena: 500 obr/min, hitrost vretena (min.): 10 obr/min, moč motorja brusilnega vretena: 7.500 W, skupna masa: 5.600 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, OKAMOTO Model OGM-3100 P NC Year of manufacture: 1998 Control: Fanuc 18 GCA Maximum swing diameter: 320 mm Maximum distance between centers: 1,000 mm Max. workpiece diameter to be ground: 300 mm Max. workpiece weight between centers: 150 kg Grinding wheel: Diameter x width x bore: 455 x 75 x 127 mm Wheel speed: Infinitely variable Peripheral speed: 45 m/sec Grinding spindle head (X-axis): Max. travel 300 mm Swivel angle workpiece table: Not swivelable Workpiece table (Z-axis): Travel: 1,150 mm Swivel range: 0 – 10 ° Workpiece spindle head: Fixed/rotating version Spindle taper: MT 4 Spindle bore diameter: 20 mm Spindle speed: 10 – 500 rpm Grinding spindle swivel angle: Not swivelable Tailstock type: With manual fine adjustment of taper Quill travel: 30 mm Morse taper: MT 4 Grinding wheel drive: 7.5 kW Dimensions/Weight Length x Width x Height approx. 4243 x 2490 x 1860 mm Machine weight approx. 5,600 kg Standard equipment Complete FANUC keyboard with radius compensation for creating ISO programs Shop floor programming: Graphical software for grinding and dressing cycles with teaching function GAP eliminator Shoulder positioning Lamp Documentation Leveling screws and base plates Accessories Marposs measuring control Ø 8 – 92 mm Various flanges Various grinding wheels Band filter Hodpfxsxma Ifs Ah Denu All information is subject to change and prior sale reserved. Prices: plus VAT Terms of payment: net, payment before loading.

Stanje: rabljeno, Leto izdelave: 1980, številka stroja/vozila: 19780, Grinding length: 600 mm Grinding width: 300 mm Workpiece height: 375 mm Spindle speed range: 1,000 – 3,000 rpm Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle drive: 2.8 – 8.4 kW Machine weight approx.: 3.5 t Hnedpfscxxrzex Ah Deu CNC-controlled surface grinding machine with 3D-controlled profile dresser, ELB CNC control unit Unicon with integrated electronic handwheel, monitor, analogue spindle load indicator, infinitely variable cross feed, coolant system with magnetic roller separator, full enclosure, separate control cabinet, additional grinding wheel with flange.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 (125) mm Max. grinding wheel diameter: 400 mm Max. grinding wheel width: 50 mm Grinding spindle speed: 1500 / 1700 / 2200 rpm Drive power - grinding motor: 3.0 kW Workpiece spindle speed range: 20 - 400 rpm Automatic infeed at table reversal: 0.001 - 0.03 mm/Ø Rapid traverse (infeed/return): 40 mm Swivelling grinding spindle head: 270° (3 x 90°) Swivelling workpiece headstock: 360° Workpiece headstock: Morse taper 5 Hydraulic unit: 0.60 x 0.45 x 0.60 m Operating voltage: 400 V Grinding table: swivelling 10° Grinding wheel dimensions: Ø400 x 50 x 127 mm (left) Grinding wheel dimensions: Ø225 x 20 x 76.2 mm (right) Spindle motor drive power: 3.0 kW Tailstock quill taper: Morse taper 3 Quill stroke: 30 mm Machine weight: approx. 2.2 t Space requirement: approx. 2.58 x 1.68 x 1.67 m ACCESSORIES - Coolant tank with pump - Support stand for internal grinding spindle D 70 The machine has been overhauled both geometrically and electrically. Machine with new bearings, new paint, new control cabinet Hnedpsxh Rwyjfx Ah Deu with frequency converter and AC motor for the workpiece spindle drive. New hydraulic motor, 2-axis digital readout SONY, centre height extension by 50 mm, machine feet, 1 x wheel flange left, new style tailstock (rectangular), hydraulic quill return via foot pedal, cycle spark-off time with automatic shut-off, new coolant pump, guides newly scraped with inspection report.

Stanje: delavnici obnovljeno (rabljeno), Engraving Cutter Grinder Manufacturer: Deckel Model: S0 Year of manufacture: unknown – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine No.: unknown with warranty Accessories: - Grinding wheel with flange - Operating manual Hodpfx Aehvrugsh Dsnu - used, as seen -

Stanje: rabljeno, HORIZONTAL BELT SANDER WITH VERTICAL BELT, MODEL COMEVA LC180 – USED Hnjdpfxswrpzhj Ah Dou

Stanje: rabljeno, Nadomestni in dodatni deli za SCHAUDT Deli, shranjeni dalj časa; Prirobnice so zagotovo z okrogle brusilke SCHAUDT. Vsi ostali deli – bi lahko – pripadali stroju SCHAUDT! Hjdpfxexdwxpj Ah Dsnu Za to ni nobenega jamstva!

Stanje: rabljeno, Tračni brusilni stroj BÜRKLE BSU 2500/800 - rabljen - Pokrov brusnega traku, Odsesovalni ventilator ----- Tehnični podatki ----- Velikost mize: 2.500 x 800 mm, Motor: 5,5 kW, Mere brusnega traku (DxŠ): 7.200 mm Hedpfx Ajxlt Eboh Denu

Stanje: rabljeno, Leto izdelave: 1982, Grinding length: 500 mm Hodpfx Ahocxxtmj Djnu Grinding width: 225 mm Workpiece height: 400 mm Total power requirement: 5.5 kW Machine weight approx.: 3.4 t with NC control NC81, table toothed belt drive 100-25000 mm/min, automatic infeed, electronic straight dressing with speed compensation, coolant pump, emergency stop safety device

Stanje: rabljeno, Leto izdelave: 1990, Dolžina mize 600 mm Širina mize 380 mm Krmiljenje FANUC 0-M Prečni pomik 500 mm Vzdolžni pomik 300 mm Največji brusilni premer 230 mm Krmiljenje FANUC 0-M Koordinatni brusilni stroj | HAUSER - S35-400 Stroj je v vzdrževanem stanju. Hnjdpfxsw Eykye Ah Dou Upoštevajte, da so tehnični podatki dodani na podlagi primerljivih strojev.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1986, Engraving Cutter Grinder Make: Deckel Model: S0E Year of manufacture: 1986 - overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine no.: 86-5751 with warranty Equipment: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating manual Incl. installation of an on/off switch with undervoltage release for implementation of restart protection for example, in case of power failure or unplugging the mains plug incl. fabrication of a mounting adapter plate Used condition, sold as seen The machine meets the technical specifications of its original year of construction. Hsdpfx Ahsqctnij Denu

Stanje: dober (rabljeno), Grindable, maximum diameter: 200 mm Centre distance: 450 mm Approximate machine weight: 2.2 t Hodpfslz Nxwex Ah Denu Machine dimensions:

Stanje: zelo dobro (rabljeno), Rezkalni in brusilni stroj Znamka: Brand Tip: SP 50 SEO 30 / KS Leto izdelave: 1997 Agregat za tračno brušenje KS 30 Širina traku: 120 mm Dolžina traku: 2100 mm Hitrost traku: 14 m/s Agregat za profilno brušenje DS 40 Hodpfx Ahjxmgcvs Dsnu Moč: 0,75 kW 1000 vrt./min Premer osi: 30 x 100 mm

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Données techniques : Plage de rectification : 3200 x 1800 mm Course transversale : 1680 mm Course longitudinale : 3300 mm Distance entre la table et le centre de la broche : 1155 mm Passage entre les montants : 2000 mm Dimensions de la table magnétique : 3200 x 1500 mm Charge sur la table, aimant inclus : 6000 kg Avance - axe longitudinal : 5000 - 30000 mm/min Avance - axe transversal : 2000 mm/min Avance - axe vertical : 2000 mm/min Dimensions de la meule : Diamètre : 500 mm Largeur : 120 mm Alésage : 203,2 mm Puissance du moteur de broche de rectification : 32 kW Plage de vitesse de broche : 1000 à 3000 tr/min Puissance raccordée : 66 kW Poids de la machine : 39 000 kg Encombrement : Longueur : 11030 mm Largeur : 6075 mm Hauteur : 4450 mm Équipement et accessoires : Commande CNC MITSUBISHI GOT 1000 Installation de refroidissement 1000 litres avec filtre à bande papier Aspiration des brouillards d’huile Différentes meules Dresseur automatique pour la meule Hedpfsw Hwrdjx Ah Denu Table magnétique 3200 x 1500 mm Documentation machine

Leto izdelave: 1988, Stanje: dober (rabljeno), Coolant system Tailstock Technische Daten / technical details: Spitzenhöhe / center height: 180 mm Spitzenweite / center to center: 1200 mm Hedpfxsnl Dp Uj Ah Donu max. Schleiflänge / max. grinding length: 1000 mm max. Werkstückdurchmesser / max. workpiece diameter: 355 mm Schleifscheibenabmessungen / grinding wheel dimensions: 400 x 50-80 x 127 mm Antriebsleistung / drive capacity: 8 kW Gewicht der Maschine ca. / weight approx.: 4200 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich – Technical data, accessories and description of the machine are not binding.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Cutter Grinder Manufacturer: Deckel Model: S0E Hnodolxpfmspfx Ah Dsu Year of manufacture: 1988 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine No.: 88-6730 Warranty: 12 months for single-shift operation from delivery For machines located outside our North Bavarian sales area, travel costs are to be borne by the customer. Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating manual Including installation of an on/off switch with undervoltage release for restart protection (e.g., in the event of a power failure or unplugging) including the production of a mounting adapter plate Sold as seen Technically, the machine corresponds to the state of the art at the time of manufacture.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Engraving Cutter Grinder Manufacturer: Deckel Model: S0E Year of manufacture: 1984 - overhauled, newly repainted RAL7035 light grey / RAL7012 basalt grey Machine No.: 84-5532 with warranty Accessories: - Machine stand - Microscope with mount - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating manual Including installation of an on/off switch Hnsdoqctp Sjpfx Ah Dsu with undervoltage release for restart protection (e.g., in case of power failure or disconnection of the power plug) including fabrication of a mounting adapter plate - Used, as seen -

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Cutter Grinder Make: Deckel Model: S0E Year of manufacture: 1989 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine no.: 89-5054 Hjdpfx Ahsqctm Ne Dsnu with warranty Accessories: - Machine stand - Microscope with holder - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating manual Including installation of an ON/OFF switch with undervoltage release to ensure restart protection —for example, in event of power failure or unplugging the mains plug including fabrication of a mounting adapter plate - Used, as seen -