Cilindrični brusilni stroj - Universal

KELLENBERGER UR175/1000

Stanje: rabljeno, TECHNICAL DATA - Distance between centers: 1000 mm - Center height: 175 mm - Table swiveling angle: 9 degrees - Universal grinding wheelhead spindle - Left grinding wheel dimensions: 400 x 50 x 127 mm - Motor power: 3 kW - Spindle speeds: 1500 / 1700 / 2200 rpm - Wheelhead orientation: 270° (3 x 90°) - Internal spindle bore: 90 mm - Workhead orientation: 180 degrees - Spindle speed: 20 – 400 rpm - Spindle internal taper: Morse 5 - Motor power: 0.9 kW - Tailstock internal taper: Morse 4 - Tailstock quill stroke: 30 mm - Dimensions: 2860 x 1680 x 1670 mm - Machine weight: 2500 kg ACCESSORIES - Automatic cycle (roughing, finishing, and return) - Counter centre Djdsxy S A Iopfx Adieck - Coolant tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 steady rests with two-point contact - 1 steady rest with three-point contact - 1 set of drivers - Various grinding wheel holders

Stanje: rabljeno, Leto izdelave: 2000, Grinding diameter: 360 mm Grinding length: 1600 mm Centre height: 180 mm Internal diameter: 0 mm Grinding depth: 0 mm Swing diameter: 0 mm Total power requirement: 40 kW Machine weight approx.: 10,000 kg Space requirement approx.: m KARSTENS Universal "CNC" External, Internal and Face Grinding Machine with capabilities for multi-sided, non-circular, polygon, and thread grinding BWO CNC control Type 900 C, Type K 51-1500 Year of manufacture: 2000 Serial no. 99 033 _____ Centre height: 180 mm Centre distance / Grinding length: 1,700/1,600 mm Djdjt Hw Rdepfx Adisck Max. workpiece weight between centres: 250 kg External grinding: Grinding diameter approx.: 5 - 360 mm Grinding wheel size (diameter x width x bore): 500 x 100 x 127 mm Grinding spindle speeds (35 m/s / 50 m/s): 1,900 / 2,200 rpm Drive power external/face/internal: 7.5 / 7.5 / 4.0 kW Grinding spindle head: 3 positions B-axis swivel range: 240 / 17.5 ° X-axis / Cross slide stroke: 360 mm Grinding slide feed rate: 0.001 – 125 mm/min Workpiece spindle speeds, steplessly adjustable: 1 – 1,000 rpm C-axis spindle mount / Bore, 24 mm MK 4 Table feed (Z-axis): 0.01 – 10 m/min Total drive power: 40 kW - 400 V - 50 Hz Weight approx.: 10,000 kg Accessories / Special features: Universal CNC cylindrical grinding machine for almost all grinding tasks, suitable particularly for non-circular grinding / eccentric & cam profile grinding, polygonal grinding, as well as face grinding of multi-sided workpieces and even thread grinding with corresponding grinding wheel profiles. Freely programmable BWO CNC controller with numerous subprograms and easy parameter input. Grinding of multiple diameters in a single clamping possible. - B-axis with three grinding spindles, one with MOVOMATIC touch probe - MOVOMATIC pneumatic diameter gauge CR 60 for mounting on the grinding table, control unit type ES 400 - MPM grinding wheel balancing unit, straight dresser with diamond fleece mounted on table, powered diamond wheel dressing device - Workpiece spindle head pneumatically movable, hydraulic tailstock with adjustable quill - Various further accessories, but without coolant equipment Condition: good to very good – demonstration possible under power Ideal machine for spindle manufacturing, etc. Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1995, Premer brušenja 350 mm Dedsyatx Sepfx Adiock Dolžina brušenja 1000 mm Višina konic 175 mm Delno obnovljen stroj z merilnim protokolom v skladu s tolerancami za nove stroje NOV sistem vodenja Eckelmann ENC z BEMA programsko opremo za brušenje Numerično krmiljena B-os Notranja brusilna naprava premer 80 mm Brusni kamen levo premer 400 mm Brusni kamen desno premer 300 mm Notranje brusilno vreteno HJN 828 Hidravlični konjiček Mikro nastavitev Merilni sistem KEL SET

Stanje: dober (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 31.211.014, višina središča: 225 mm, dolžina brušenja: 1.000 mm, premer brusilnega koluta: 400 mm, premer brušenja: 500 mm, premer obdelovanca med konicama: 500 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Kellenberger UR 175x1000 CNC Kelco 70, v popolnem delovnem stanju. Povečanje s 175 na 225 (možno povrniti v prvotno stanje). Številka stroja: 31.211.014, leto izdelave: 1987. Priprava za notranje brušenje. Dodatna oprema: 1 x prirobnica za brusilni disk (leva) 1 x prirobnica za brusilni disk (desna) 1 x nosilec za brusilni disk z različnimi nastavki 1 x magnet za obdelovance Dcsdsyyur Ispfx Adiek 1 x filter za papirnate trakove Brez garancije, jamstva ali možnosti vračila. Na voljo takoj, prevzem na lokaciji. Po potrebi lahko uredimo transport.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2011, Universal tool milling machine Make: KUNZMANN Model: WF 400 MC Year of manufacture: 2011 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red / RAL7016 anthracite grey Machine number: 410016 with warranty Geometric acceptance with inspection protocol Accessories: - HEIDENHAIN TNC 320 path control - HEIDENHAIN HR 410 electronic handwheel - Preparation kit for probe TS 220 Dodpfovdrx Ujx Adiock with adapter cone on the operator panel and spindle lock - Fixed table 650 x 375 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 - Central lubrication system, electric - Coolant system - Splash guard cabin, moving with the machine, electrically secured - Left side panel of the splash guard cabin removable, electrically secured - Operator panel on machine base - Operating instructions Used, as seen The machine technically corresponds to the standard of the year of construction.

Stanje: rabljeno, Leto izdelave: 1999, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina med konicama 175 mm Krmiljenje FANUC 18i-TA GENERALNO OBNOVLJENO Fotografija podobnega že dobavljenega stroja - Oprema brusnega kolesa LEVO 500 mm - Oprema brusnega kolesa DESNO 400 mm - Notranja brusilna enota 120 mm za jermensko gnane notranje brusilne vretena (standard) - CNC krmiljenje FANUC 18i-TA - Pripravljeno za kombinirano merilno krmiljenje Marposs (Minialsar, Positionar) z E5N - B-os - Kel-Set Dedoy U N Hpspfx Adisck - Hidravlični povrat pinole - Mikro nastavitev na konjičku - Glavna vretena z vrtljivo osnovo

Stanje: rabljeno, Leto izdelave: 1997, Premer brušenja 350 mm Dolžina brušenja 1000 mm Višina konic 175 mm Teža stroja pribl. 6 t Prodaja poteka s funkcijskim preizkusom Po želji z novo geometrijo mize za doplačilo C-os za poligonsko brušenje B-os z ročnim vrtenjem Dcedjy R Ed Nspfx Adijk Premer brusnega kola levo 400 mm Premer brusnega kola desno na zahtevo Naprava za notranje brušenje Konjiček z fino nastavitvijo

Stanje: dober (rabljeno), Leto izdelave: 2004, Universal milling machine with HEIDENHAIN TNC 124 path control mechanical handwheels swivelling tilting table ±45° hydraulic tool clamping half-enclosure coolant tank manual Dcodpfx Ajigm Tcediek Technical specifications: X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Spindle speed: 63 - 3,150 rpm Infinitely variable feed rate: 12-3000 / 6-1500 (Z) mm/min Quill stroke: 100 mm Head swivels: ±90° Spindle taper: ISO SK 40 Clamping area: 630 x 400 mm Total connected load: 8 kW Machine weight: approx. 2.2 t Space required: approx. 2 x 1.9 x 1.95 m

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Required space approx. 3.6/3.5 m As a global leader in the field of Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new condition and with warranty, but also offer you service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical overhaul: - Complete machine overhaul according to Kellenberger measuring protocol - New service-friendly enclosure - New paintwork Electrical overhaul: - New state-of-the-art CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (on B-axis) Standard equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper. Optionally with fine adjustment - Grinding spindle stocks T1/T2/T3 - T1 grinding wheel diameter 400mm - T2 grinding wheel diameter 300mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4kW - High-resolution B-axis - Marposs measuring system for grinding wheel measurement - Marposs longitudinal positioning - GAP Control (sensor on grinding spindle stock) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra cost: - HF internal grinding spindle - High-precision, maximum rigidity workpiece spindle stock - Measuring control - Extraction system - Paper band filter Control system: Grinding basic cycles - Zeroing workpiece with Z position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Measuring dressing diamond - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) Dcsdpfxouwv H Hs Adiek - External and internal taper grinding (swivelling the B-axis, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angle - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Dcsdjuxfucjpfx Adijk Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: rabljeno, Leto izdelave: 2008, Podajanje materiala poljubne dolžine (maks. hod 610 mm) Premer reza: okroglo 510 mm, ploščato 500 x 500 mm Hitrost rezanja nastavljiva preko krmiljenja: 25 - 235 m/min Transporter za ostružke Dcjdpfxsvxqtaj Adisk Navodila za uporabo, električne sheme in seznami rezervnih delov na voljo Le približno 5.000 ur žaganja Dodatni tehnični podatki na sliki ali na zahtevo Teža stroja: cca 3 t Zelo dobro stanje

Stanje: rabljeno, Leto izdelave: 2006, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Machine weight: approx. 3.5 t Machine completely overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a recently completed machine with some optional features. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/face grinding - B-axis automatic, 1° Hirth serration - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount, 400 mm diameter - Right grinding wheel mount, 300 mm diameter - Internal grinding device with belt drive Dodst Ii Nbspfx Adieck - Tailstock with micro adjustment - Fine adjustment on swivel table - Paper band filter SBP4, 240l

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Cross travel max.: 270 mm Workpiece weight max. (fly): 130 kg including clamping Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Picture of a previously delivered machine. - Operation via touch panel is extremely simple. - The symbols on the control panel are nearly identical to the original system, so no extensive retraining required. - Diagnostic function with display of PLC messages and digital I/Os. - Dressing function can be expanded or modified per customer request. - Oriented spindle stop for workpiece spindle available on request. - New maximum infeed amount: 40 mm (can be optionally increased). - Digital readout on 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding spindle headstock (no height adjustment with spindle possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Dcodpfx Adjuxfupeijk Included: - Operating tools - Collet tube for chuck Further accessories available on request. The machine is equipped with an electronically controlled infeed system (X-axis) with stepper motor drive. Hydraulic table traverse and rapid feed. Versatile application in production for external and internal cylindrical grinding, or for combined external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control system The machine tool does not currently meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety targets must be determined by a risk assessment according to BetrSichV.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Na voljo je konvencionalni univerzalni valjčni brusilni stroj EMAG W 11 Evolution. Zunanji-notranji-ploskovni brusilni stroj je idealen za izdelavo posameznih kosov, prototipov in malih serij. Osnova strojev EMAG W 11 Evolution je preizkušen koncept KARSTENS valjčnih brusilnih strojev. Brez hidravlike, pogoni osi s servomotorjem in kroglasto vijačnim vretenom, vnos brusilnih parametrov prek zaslona na dotik, samodejno glajenje z izravnavo, samodejno pomikanje na varno razdaljo. TEHNIČNI PODATKI Dolžina obdelovanca: max. 1.500 mm Višina konic: 200 mm | Opcija 320 mm Teža obdelovanca: 250 kg Premer zunanjega brusnega kamna: max. 500 x 80 mm Vreteno obdelovanca: MK 4 | Opcija MK 5 / MK 6 Dodpfxstmrlhs Adieck Konjiček: MK 4 Cena, dobavni rok in oprema stroja po dogovoru.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, višina središča: 175 mm, teža obdelovanca (maks.): 180 kg, dolžina brušenja: 1.000 mm, premer brusilnega koluta: 400 mm, skupna dolžina: 1.150 mm, premer brušenja: 349 mm, The machine is operational and in use at our facility. It is equipped with 2 external diameter and 2 internal grinding units, featuring a C-axis. Dodpfxev Uxrij Adiock