Brezsredinski valjčni brusilni stroj

Malcus MC-40

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Initial commissioning: 2000 Control: Heidenhain TNC 430 M Machine hours: 111,500 h X-axis: approx. 4,000 mm Y-axis: approx. 2,360 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 6,000 x 2,000 x 420 mm T-slot spacing: 18H12 / 250 mm Max. table load: 30,000 kg/m² 2-axis milling head AC3 Spindle power: 25 kW Spindle speed: max. 15,000 rpm Torque: 80 Nm Tool holder: HSK 63A Tool clamping: hydraulic !!! Spindle freshly overhauled at the end of 2024 !!! Drives linear axes Feed rate X-, Y-axis: up to 20 m/min Feed rate Z-axis: up to 20 m/min Axis acceleration X, Y, Z: up to 1.5 m/s² Connection data Ncedpfx Aew Rl S Ssbbel Connected load: 40 kW Main fuse: approx. 80 A Dimensions, weights Space requirement machine with peripherals: approx. 8,500 x 5,600 x 4,945 mm Total weight: approx. 18,000 kg Colour Enclosure, gantry, control cabinet: light grey Milling head and applications: green Additional equipment - 3-sided enclosure, without extraction ducts - The illustrated additional clamping table is not included in the scope of delivery Condition of the machine Fully functional, in very good condition. The machine is still connected and immediately available.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1978, potovalna razdalja osi X: 4.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 2.066 obr/min, širina mize: 1.000 mm, dolžina mize: 6.100 mm, skupna masa: 19.000 kg, 3-axis Newall digital readout, feed drives with variable speed controller SA 50 head, spindle speeds infinitely variable up to a maximum of 1500 rpm Ncodpfx Abjvz Aydobol Table: 6100 x 1000 mm Travel: 4500 x 1000 x 1000 mm Weight: 19 tonnes

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna masa: 6.410 kg, skupna dolžina: 19.250 mm, nosilnost: 10.000 kg, glavna hitrost dviga: 800.000 mm/min, Oprema: dokumentacija / priročnik, Mostovno dvigalo Proizvajalec: ABUS Tip: ELK Razpon: 19.250 mm Nosilnost: 10.000 kg Upravljanje možno preko HBC radijskega daljinskega upravljalnika in visečega komandnega stikala Popolna dokumentacija priložena Ncjdpfx Ajx I Aapjbbjl CE

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: GS1000/5-T, največja hitrost vrtenja: 30.000 obr/min, skupna masa: 15.500 kg, Letnik izdelave: 2014 Stanje: zelo dobro Magazin: 66 x HSK63 Krmiljenje: Heidenhain 530 Vreteno: n=30.000 Ncedpfxsw Awmts Abbol V mizi integriran Erowa sistem ničelne vpenjalne točke Erowa robot easy 250 avtomatizacija s 6 paletami 3D merilni sistem Oljno-zračna mazalna enota za visokofrekvenčno vreteno Lasersko merjenje Delovne ure vretena:

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Ncodod Nb A Njpfx Abbol Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel peripheral speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 t, required space approx. 3.0x1.5 m. Njdpfouy Ifgsx Abbscl Before sale, the machine will be fitted with a new Siemens S7 control system including a new operator panel, and the dressing quill for the grinding wheel is electrically actuated via servo motor. The machine will be thoroughly checked, with defective parts repaired or replaced. Various options possible (coolant system, loading/unloading devices, workpiece rulers, etc.).

Stanje: zelo dobro (rabljeno), Grinding length 1000 mm Grinding diameter ø 350 mm Ncjdpok Abxxefx Abbjl In very good condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, potovalna razdalja osi X: 700 mm, pomik osi Y: 400 mm, pomik po osi Z: 300 mm, hitro pomikanje X-os: 50 m/min, hitri pomik os Y: 50 m/min, hitri pomik na osi Z: 50 m/min, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 20 m/min, proizvajalec krmilnikov: Brother, model krmilnika: CNC-B00, širina mize: 400 mm, dolžina mize: 800 mm, obremenitev mize: 250 kg, največja hitrost vretena: 16.000 obr/min, - Število osi: 4 REZKALNA VRETENA - Tip držala orodja: BT30 - Moč vretena: 7,4 / 4,9 [kW] - Hitrost vretena: 16.000 [vrt/min] Nsdpfxeulwzto Abbocl LINEARNE OSI - Pomiki po oseh X/Y/Z: 700 x 400 x 300 [mm] - Hitro pomikanje (X/Y/Z): 50 / 50 / 50 [m/min] - Hitrost podajalne rezanja (X/Y/Z): 10 / 10 / 20 [m/min] - Razdalja miza / čelo vretena (min./maks.): 180 - 480 [mm] MENJALNIK ORODIJ - Tip avtomatskega menjalnika orodij: "Umbrella" (dežnik) - Kapaciteta zalogovnika orodij: 21 - Čas menjave orodja: 1,4 [s] MIZA - Dimenzije mize: 800 x 400 [mm] - Največja nosilnost mize: 250 [kg] NAPAJANJE - Napetost napajanja: 220 [V] - Skupna instalirana moč: 9,5 [kVA] TEŽA IN MERE - Tloris stroja: 2.050 x 2.207 [mm] - Višina stroja: 2.592 [mm] - Teža stroja: 2.400 [kg] OPREMA - CNC: Brother CNC-B00 - Vmesnik: Ethernet / USB - Trosignalna svetilka - Pripravljeno za robotsko nalaganje: desna stran - Tip delilnika: polna 4. os * Proizvajalec: LEHMANN EA-510 * Hod 4. osi: 360 [°] * Natančnost indeksiranja 4. osi: 0,001 [°] * Višina centra: 150 [mm] - HLADILNA POSODA - Hladilno sredstvo skozi vreteno * Z visokotlačno črpalko: 15 [bar] - Transporter ostružkov: zadnji HAKUSAN - Ekstraktor oljne megle: SARA UC1SD - Elektromehanski transformator: 400 / 220 [V]

Stanje: dober (rabljeno), Universal milling head, milling holder, milling extension, angle milling head - Manufacturer: Waldrich - Spare part: removed from a milling machine - Milling head: swiveling Ncsdpfx Abofxlf Aebel - Quill stroke: 150 mm - Spindle taper: SK50 - Motor: 11 kW, 1470 rpm - Spindle speed: 25 - 560 rpm - Transport dimensions: 1550 x 600 x H460 mm - Weight: 636 kg

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.700 mm, pomik osi Y: 2.250 mm, pomik po osi Z: 1.300 mm, skupna širina: 3.000 mm, skupna dolžina: 8.710 mm, skupna višina: 5.250 mm, premer vretena: 130 mm, obremenitev mize: 16.000 kg, dolžina mize: 2.200 mm, širina mize: 2.200 mm, skupna masa: 40.000 kg, Accessories: 2 different heads Nedpfsw Hr Hpjx Abbecl 1 faceplate