Lesna Stružnica nakup rabljenega (3.384)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, High-precision leadscrew lathe Schaublin 102N-VM Technical data: Kledpfxjwvq Tme Af Nel >> Machine no. 283152 >> Centre height: 102 mm >> Distance between centres: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 mm to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock taper: MK2 >> Spindle speeds: 270–3000 rpm, stepless >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck with 2 sets of jaws >> Toolholder with 6 insert pockets >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Tool bits, drill chuck (see pictures) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The 102VM also runs quietly at high spindle speeds. The gear set for thread cutting is included, although it may not be complete. Take the opportunity to inspect the machine under power on site and see its excellent condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with acceptance protocol certifying tolerances to new-machine standards Klsdpfxjvrcqde Af Njl Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1,000 mm >> Spindle speeds: from 13 to 2,000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock: MT 4 >> Feeds: 0.026 to 0.888 mm/rev >> Threads possible: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Features: switching mm/inch, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of counting selectable >> 3-jaw chuck with wedge bars, nearly new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stop buttons Optional: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Certification to inspection protocol. Painted in 2K high-gloss white. All accessories, including Multifix and chuck, are new. Safety: The machine features a brake motor, electronic spindle guard, and two emergency stop buttons – making this an as-new lathe. The Weiler runs very smoothly even at high speeds. This newer generation of Weiler lathes is highly user-friendly and allows you to produce ground-quality surfaces. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Schaublin 150 High Precision Lathe with 2-Axis Digital Readout ND780 Technical Specifications: >> Year of manufacture: approx. 1980 >> Centre height: 150 mm >> Centre distance: 630 mm >> Swing over bed: 340 mm >> Spindle nose: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric threads: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable spindle speeds: 55–3,000 rpm >> Rapid traverse motor: 1,500 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1,200 kg Accessories: >> 160 mm three-jaw chuck, 1 set of jaws >> Multifix B, 3 tool holders >> Collet chuck with collets >> Change gears >> Stops >> Coolant system >> 1 box of reversible jaws >> Centre points >> Operating manual About the Machine: Kledpfx Afswynluj Nol For sale is a Schaublin 150 high-precision lathe. The machine runs, features a rapid traverse, and is in good used condition. Take advantage of the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout (K&C), Fully Refurbished to Factory Tolerances with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Camlock Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread Cutting Capabilities: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: from 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake (switchable) >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by K&C, brand new, 12-month manufacturer warranty with user manual Features: Conversion mm/inch, coordinate selection ABS/INC, value halving, reference mark, 200 tool programming slots, taper calculation, radius/diameter, one-touch zeroing, count direction switching >> 200 mm 3-jaw scroll chuck with soft jaws (almost new), 1 set of jaws >> Multifix size B with 2 tool holders, NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp Kodpfx Afevrckqs Noll For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request About the Machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically refurbished condition. The guideways have been newly ground and scraped. Inspection executed according to test protocol. 2K glossy white paint. The Multifix tool post and chuck are new. Safety features include a braked motor, electronic spindle guard, and two emergency stop switches, making this lathe in absolutely as-new condition. The machine runs very smoothly even at high spindle speeds. This latest generation of Weiler lathes is highly user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site and verify its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition !!! Technical Data: >> Machine No. 2801 >> Center Height: 120 mm >> Distance Between Centers: 430 mm >> Spindle Speed: 60 - 3000 rpm in 18 gear steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 55027 >> Tailstock Morse Taper: MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 pc Röhm 125 mm three-jaw chuck with 4 sets of jaws >> Collet system with collets from 2 mm to 12 mm in 1 mm increments, including drawbar >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Clamping tools About the Machine: Offered is a Weiler Primus lead and feed screw bench lathe in very good condition. The machine is, of course, fully functional. All carriages move very smoothly and evenly. The Weiler runs quietly, even at high spindle speeds. This Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect the machine under power on site and convince yourself of its condition. (The base cabinet is included; the machine is not bolted to it.) Digital readout available at additional cost. Ksdpfxov Tyzco Af Nsll

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Data: >> Year of manufacture: approx. 1970, Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: 30 – 3550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds from 0.010 to 1.184 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Length: 1.4 m, Height: 1.2 m, Depth: 0.55 m Accessories and Equipment: >> Collet chuck system with 32 collets (set is incomplete) and mount >> 1 three-jaw chuck including a set of jaws >> 1 four-jaw chuck including a set of jaws >> Multifix size A with 2 tool holders >> Change gears >> Bed stop About the Machine: Ksdpfx Afsvv Etvo Njll Offered is a used Weiler Matador VS-2 in fully functional condition. You are welcome to inspect the machine under power on-site to verify its condition for yourself.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Emcomat 17D Lead and Feed Screw Lathe, 3-Axis Digital Readout K&C, New from Training Workshop, Excellent Condition!!! Technical Specifications: >> Year of manufacture: approx. 2000, Machine no. D3F H1 010 >> Centre height: 170 mm >> Swing diameter over bed: 340 mm >> Swing diameter over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35–3000 rpm >> Quill stroke: 120 mm >> Tailstock: Morse taper 3 Ksdpfswvuf Tox Af Nsll >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Space requirements: approx. length 1.600 x depth 0.9 x height 1.3 meters >> Weight: approx. 730 kg Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12 months manufacturer's warranty with operating manual Functions: Metric/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming (200 positions), taper calculation, radius/diameter, rapid zeroing, count direction switching >> 1 piece 3-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B tool post with 2 holders >> Chip guard >> Coolant system About the Machine: Offered is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in excellent condition. The machine is naturally fully functional. The bedways are in very good condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new 3-jaw chuck. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Engine Lathe Model Condor B, Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout NEW Geometrically overhauled with inspection protocol for new machine tolerances! Technical Data: Ksdpfx Afsvambce Njll >> Machine No. 90-1495 >> Center height: 165 mm >> Center distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock MT 3 >> Feeds from 0.015 to 0.46 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Switchable spindle brake >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Features: >> New K&C 3-axis digital readout, 12 months manufacturer's warranty with operation manual Functions: switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck system, NEW collets from 3 to 26 mm in 1 mm increments >> 160 mm three-jaw chuck with 2 sets of jaws, NEW >> Multifix quick-change toolpost, size A, with 2 tool holders, NEW >> Bed stop >> Electric chuck guard NEW >> LED machine lamp NEW >> Rear safety cover >> Operating manual >> Coolant system >> Machine feet About the machine: For sale is a Weiler Condor B lead and feed screw lathe in a geometrically overhauled, like-new condition. All guides have been newly ground or hand-scraped. Delivered with a test protocol upon acceptance. This is an excellent machine with electronic spindle protection. All accessories such as collets, chuck, and Multifix toolpost are new. Spindles, spindle nuts, bearings, belts, and wipers have been replaced. Take the opportunity to inspect this machine under power at our site and convince yourself of its condition.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160B Precision Centre Lathe – 3-Axis K&C Digital Readout System (NEW) Refurbished with acceptance protocol confirming new machine tolerance levels. Technical Data: >> Machine Number: 87 160 760 >> Centre Height: 160 mm >> Distance Between Centres: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock: Morse taper MK 3 >> Feed Rates: 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake, switchable >> Dimensions (L x H x D): 1.6 m x 1.25 m x 0.7 m Accessories & Equipment: >> 3-axis K&C digital readout system (new), including 12-month manufacturer's warranty and operating manual Functions: mm/inch switching, coordinate mode ABS/INC, value halving, reference mark, tool memory for up to 200 tools, taper calculation, radius/diameter display, instant zero reset, and count direction switching >> New collet system, collets NEW from 3 to 25 mm in 1 mm increments >> Three-jaw chuck 160 mm, new, with 2 sets of jaws >> Multifix size A toolpost system with 3 tool holders Klsdpfxsvrdlce Af Nsl >> Electronic spindle protection >> New LED machine lamp >> New machine mounts >> Splash guard >> Operating manual, spare parts list (PDF) About the Machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe meeting toolroom precision, in fully overhauled geometric condition. Refurbished, with acceptance protocol confirming new machine tolerance specification. For operator safety: electronic spindle protection, covered lead and feed screws, 2 emergency stops, and a braking motor. This newer generation of Weiler lathes is highly operator-friendly and can produce ground-quality surface finishes. You are welcome to inspect the machine under power onsite and verify its condition firsthand.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with K&C 3-Axis Digital Readout (NEW) Geometrically overhauled with an acceptance report certifying tolerances compliant with new machine standards. Technical Data: >> Machine No.: 84-121 Kodpfxewrm Dtj Af Njll >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Camlock Spindle Nose DIN 55027 Size 5 with bayonet lock >> Tailstock Morse Taper: MK 3 >> Feeds: 0.015 to 0.46 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle Brake (switchable) >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Equipment and Accessories: >> 3-axis digital readout from K&C (new), 12 months manufacturer's warranty, operating manual included Functions: mm/inch selection, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, selectable counting direction >> NEW collet chuck, NEW collet set 3–26 mm in 1 mm increments >> 160 mm 3-jaw chuck with 2 sets of jaws (NEW) >> Multifix (Quick-Change Toolpost) Size B (NEW) with 3 tool holders >> Bed stop >> Electrical chuck guard (NEW) >> Rear splash guard >> Operating manual >> Coolant system >> Machine levelling feet About the Machine: A Weiler Condor 81 lead and feed screw lathe is being offered in excellent, geometrically overhauled condition. The slides have been newly ground or hand-scraped. Delivered with an inspection protocol. The accessories, collets, and chuck are all new. For safety: The machine is equipped with a braking motor, electronic spindle guard, and two emergency-stop buttons—a lathe in as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and capable of producing surfaces comparable to grinding. Take the opportunity to view and test the machine under power on site to convince yourself of its condition.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Technical Data: >> Year of Manufacture: 1986 >> Machine No.: 86-160-348 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: 8 steps, from 96 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027, Size 5, with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread Cutting: Metric, Inch, Module, and Diametral Pitch threads possible >> Metric Thread Pitches: from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake can be engaged >> Dimensions (LxHxW): 1.6 m x 1.25 m x 0.7 m Accessories and Equipment: >> 3-axis Digital Readout from K&C, new, 12-month manufacturer's warranty with operating manual Klsdpfx Afswthbio Nol Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> Collet chuck system, collets as new, range 1–29 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix toolpost size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, in very good condition. The machine is, of course, fully functional. The Weiler has been completely dismantled, refurbished, and repainted in light grey. All carriages move very smoothly and evenly. The machine runs quiet even at high speeds. This newer generation of Weiler lathes is very user-friendly and can achieve ground-like surface finishes. Take the opportunity to view this machine under power on site and see the condition for yourself.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Emcomat Emco EM20D Lead and Feed Screw Lathe, Year of Manufacture 1995, Excellent Condition, CE Compliant!!! Technical Data: >> Year of manufacture: 1995 >> Center height: 200 mm >> Swing diameter over bed: 400 mm >> Swing diameter over cross slide: 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 ranges, infinitely variable from 35–3000 rpm >> Tailstock quill travel: 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 / 0.787 mm/rev >> 20 cross feeds: 0.023 / 0.406 mm/rev >> Footprint/installation dimensions approx.: length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and Equipment: >> 3-axis position display >> 1 piece 3-jaw chuck with 1 set of jaws >> Toolholder with 3 pockets >> Chip guard Klsdpfx Ajwag Stsf Nsl >> Coolant system >> Bed stop About the Machine: For sale is an Emcomat 20D lead and feed screw lathe, year of manufacture 1995, used very little. The machine is, of course, fully functional. All slides move very smoothly and evenly. The bedways are in excellent condition. Take the opportunity to inspect the machine under power on site and see its condition for yourself.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Takamaz XY-2000 Plus CNC stružnica (2008) Proizvajalec: Takamaz Tip: XY-2000 Plus CNC stružnica Leto izdelave: 2008 Stanje: rabljeno, pod napetostjo in v proizvodnji. 2x vretena (2x Hainbuch vpenjalna glava s kleščami) 2x revolver za orodja, oba popolnoma opremljena Lovilec kosov Kodpfjx Ti Hgox Af Nsll Podajalnik palic Video je na voljo. Dodatne informacije na zahtevo.

Stanje: dober (rabljeno), dobro delujoč Schaublin s priključki po slikah, s številnimi vpenjali Klodpfxjyaazte Af Njl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, CNC stružnica z 2 osmi DMC Korea DL22 Fanuc OiTD z Manual Guide in USB priključkom Letnik proizvodnje: 2012 Kedpfxoxyaulo Af Njll 8-palčna vpenjalna glava Prehod vretena: 65 mm Dolžina struženja: 400 mm Glava za 12 orodij Konjiček Korito s črpalko za hladilno tekočino

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Nakamura Tome WT 250 CNC stružnica (2008) Proizvajalec: Nakamura Tome Tip: WT 250 CNC stružnica Leto izdelave: 2008 Stanje: rabljena, dobro ohranjena, pod napetostjo v proizvodnji Krmiljenje: Fanuc 18i 4 osi: X, Y, C, Y 2x vreteno 2x revolver (nameščen) Premer struženja: 250 mm Dolžina struženja: 555 mm Hitrost glavnega vretena: 50–4.500 vrt./min Hitrost protivretena: 5.000 vrt./min Revolver glava 1+2: 24 postaj, vsaka z 12 pogonskimi pozicijami Portalski nakladalec GR 203 Trakasta filtracijska naprava Transporter za odrezke Dokumentacija Orodja Dodatki Klsdpjx Tir Nofx Af Njl

Stanje: rabljeno, Leto izdelave: 2000, Swing diameter over bed: 520 mm Swing diameter over cross slide: 480 mm Turning length: 3000 mm Control: SIEMENS 840 D Number of tool stations: 12 Number of driven tools: 6 Spindle bore: 103 mm C-axis: yes Scope of delivery – Basic machine: - SINUMERIK 840 D - 3 CNC-controlled axes - Swing diameter over bed: 520 mm - Turning diameter over cross slide: 480 mm - Tool turret with 12 VDI 50 mm shank holders - 1-speed AC main drive, 53 kW, 50% duty cycle - Speed range: 30 – 3000 rpm - Main spindle head Size 8 Kodjwp S Sqepfx Af Njll - Draw tube for clamping devices - Chip conveyor TURNING LENGTH: 3000 mm 12 cylindrical shank holders DIN 69880-50x78, of which 6 positions can be fitted with driven tools (power: 6 kW at 60% duty cycle, speed range: 20–2500 rpm), 2 gearbox stages C-AXIS - Speed range: 0–20 rpm - Maximum programmable angle: 9999.999° - Working area as per working space diagram POWER CHUCK 3 NHF 315-82 A8 Manufacturer: FORKARDT With centrifugal force compensation External Ø 315 mm, bore Ø 82 mm With hardened, reground top jaws Bar stock Ø max. 63 mm Including draw tube and mounting

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Colchester Student 2500 3-osni digitalni prikaz Vpenjalna naprava za vpenjalne tule Razni dodatki Kledpfxjw R S Aws Af Njl

Stanje: rabljeno, Automatic Lathe, Lathe with Copying Device UMA Type F1 NK 60 Copying Lathe for Chuck Workpieces Machine No. 28-0031 Year of Manufacture: 1971 Max. turning diameter: 150 mm Swing diameter over bed: 400 mm Turning length: approx. 200 mm Spindle bore in main spindle: approx. 42 mm Spindle speeds: 580 / 930 / 1480 / 2380 rpm (4 steps) Main motor power: 5.5 kW Power supply: 380 Volt, 50 Hz - Spindle flange for chuck mounting short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speeds selectable via 4 gearbox stages Kodpfx Aeib D H Rsf Nsll - Hydraulic clamping device with expanding arbor, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER type KMCA 61, with hydraulic feed motion - Left side with cross slide with hydraulic feed motion - Coolant unit slid under the machine bed - Hydraulic power unit positioned behind the machine - Operating manual, electrical diagram, hydraulic diagram included Space requirement for automatic lathe with hydraulic unit (L x W x H): 2900 x 1900 x 1700 mm Space requirement for automatic lathe only (L x W x H): 2400 x 1900 x 1500 mm Space requirement for hydraulic unit only (L x W x H): 1400 x 850 x 1700 mm Weight of automatic lathe: 2400 kg Weight of hydraulic unit: 400 kg Total weight with pallet: 3000 kg Good condition

Stanje: rabljeno, L + Z lathe WEWAG model 250 / 1500 Serial no. 20953 Year of manufacture approx. 1975 Center distance 1500 mm Nominal swing over bed Ø 500 mm Maximum swing over bed Ø 510 mm Kodpfx Afslzm Eqj Nell Center height over bed 255 mm Swing over cross slide Ø 300 mm Center height over cross slide 150 mm Spindle bore Ø 56 mm Spindle speeds 18 - 1800 rpm, 24 steps Chuck mounting short taper DIN 55022 Tailstock taper MK 5 Motor power 4 kW and 6.7 kW, pole-changeable - 3-jaw chuck BISON, Ø 250 mm - 4-way toolpost - Fixed steady rest - Control cabinet mounted to rear of machine Weight 2500 kg

Stanje: rabljeno, CNC Cycle-Controlled Lathe HARRISON Type Alpha 400 Plus Machine No.: P30180/150 Year of manufacture: 1998 Centre distance: 1250 mm Swing over bed: 400 mm Centre height: 200 mm Swing over cross slide: 245 mm Max. workpiece diameter in bed gap: 585 mm Bed width: 313 mm Cross slide travel (X-axis): 250 mm Tailstock quill diameter: 73 mm Tailstock quill stroke: 140 mm Tailstock taper: MT 5 Spindle bore: 54 mm Spindle nose: Camlock D1 size 6 Spindle speed: 20-2500 rpm Spindle speed ranges: - Range 1: 15-275 rpm - Range 2: 35-795 rpm Ksdpeh Hvk Aefx Af Noll - Range 3: 110-2500 rpm Feed rate X and Z: 0.03-0.6 mm/rev Rapid traverse X-axis: max. 2000 mm/min Rapid traverse Z-axis: max. 4000 mm/min Thread cutting function: Metric / Inch / Diametral / Module Spindle drive power: 7.5 kW Electrical connection: 400 Volt, 50 Hz, 23.5 kVA - Cycle control: Harrison Alpha / GE FANUC – operating language in French (France) - Automatic 3-stage gearbox (15-275, 35-795, 110-2500 rpm) - Electronic handwheels with selectable graduation (1/10/100) - 3-jaw scroll chuck FORKARDT Ø 250 mm, type CSN, 1 set soft top jaws - Quick-change tool post MULTIFIX size B with 2 tool holders - 1 revolving centre - 1 quick-action drill chuck RÖHM, 3-16 mm - Foldable chuck guard - Hinged work area safety doors - Chip tray with coolant system under machine bed - Switch cabinet fixed to the machine - RS 232 interface Floor space (L x W x H): 2600 x 1450 x 1550 mm Weight: 1950 kg In good condition

Stanje: rabljeno, L + Z stružnica WAFUM tip TUD 40 Št. št.: 35689 Leto izdelave: 1975 Razdalja med konicama: 1500 mm Premer struženja nad posteljo: Ø 440 mm Višina konice nad posteljo: 220 mm Višina konice nad suportom: Ø 125 mm Kledpew Uf Hwofx Af Nol Vrtina vretena: Ø 56 mm Hitrost vretena: 18 - 1800 min⁻¹, 36 stopenj Prirobnična prirobnica: kratek stožec DIN 55027, velikost 6 Notranji stožec konjička: MK 5 Pogonska moč: 4 in 6,7 kW - Hitrost vretena preko 2 motornih hitrosti in 18 stopenj menjalnika - 3-čeljustna vpenjalna glava Ø 315 mm BISON z 2 kompleti čeljusti (obračalne in vrtalne) - Hitromenjalni nosilec orodja MULTIFIX velikost B z 2 izmenljivima kasetama - Fiksna luneta z drsnim ležajem, notranji Ø 125 mm - Sledilna luneta z drsnim ležajem, notranji Ø 100 mm - Vodilo za struženje ozkih stožcev z avtomatskim vzdolžnim podajanjem - 1 kos sledilne centrirne konice - Dvignljiv zaščitni pokrov vpenjalne glave Prostorske zahteve D x Š x V: 3100 x 1200 x 1450 mm Teža: 3000 kg Dobro stanje

Stanje: rabljeno, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Centre distance: 400 mm Swing over bed: 250 mm Centre height over bed: 125 mm Swing over cross slide: 140 mm Centre height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and cross Chuck flange: short taper DIN 55022 Size 4 Tailstock taper: MT 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Power supply: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gearbox steps - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK-CHANGE TOOLPOST MULTIFIX with 1 insert cartridge - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centring tip for collet chuck - Emergency stop - Folding chuck guard - Splash guard - Machine lamp Kljdpfxsrtd Uwe Af Njl - Electrical diagram - Machine mounted on a steel plate (Steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space (L x W x H): 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 310435, Completely overhauled – newly painted, New workbench Country of manufacture: Switzerland Voltage: 380V, 50Hz, 3-phase Customs tariff number: 8458.1930 TECHNICAL DATA - Centre height: 102 mm - Centre distance, headstock type W, standard: 470 mm - Centre distance, headstock W with reduction gearbox: 375 mm - Swing over bed: 200 mm - Swing over cross slide: 120 mm Bed: - Height-width-length: 168-100-1000 mm Cast iron bed with ground trapezoidal profile Headstock: - Spindle nose for collets: W-25 - Collet pass-through: 19.0 mm - Reduction ratio of gear drive: 1:5 Cross slide: - Longitudinal travel: 90 mm - Cross travel: 100 mm - Tool size (shank cross-section): 12x12 mm Tailstock: - Quill taper: Morse 2 - Quill travel (tailstock with leadscrew and handwheel): 80 mm Subject to error or omission Technical data provided without obligation Inventory no. 2250006, machine consisting of: 1 NEW workbench 2000x800 mm with blue Urphen top 2000x800x50 mm 1 pedestal, 1 cabinet B750 with 7 drawers (1xD50/2xD75/2xD100/1xD150/1xD200) 1 bed, drive from above 1 workpiece headstock W-20 without gear drive, overhauled clamping key 1 overhauled cross slide 1 overhauled, aligned tailstock 1 motor 380V/50Hz/3ph, 2 speeds 1 set of collets W-20 1 chuck 2x3 jaws Ø 100 mm on flange W-20 1 new set of Multifix toolholders including: - 1 turret A with Bolt AG20 - 3 toolholders AD1675 - 1 bar stock holder AH2085 1 keyless drill chuck cap. 1–13 mm with MK2 arbor 1 solid centre MK2 OPTIONAL 1 used clamping fixture with new belt CHF 500.-- + VAT Kledpfxodr R Tco Af Nol 1 GRINDING MACHINE TYPE B-8 with 360° swiveling spindle, max. speed 28,000 rpm, height-adjustable, fine adjustment, Ref. 800053 CHF 1,325.-- + VAT.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 102 mm, višina središča: 400 mm, stružna dolžina: 2.000 mm, 26 hitrosti vrtenja od 4,5 do 1400 min⁻¹ - pogonjen zgornji suport - hitri pomik - vpenjalna glava Forkardt 400 mm Klsdpfxsx U Dxyo Af Nel