Konzolni Roko Pasu nakup rabljenega (1.289)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 247 h, ELEKTRO-GIBLJIVA TELESKOPSKA DVIGALKA Skyjack SJ 30 ARJE kot NOV, uporabljena samo v zaprtih prostorih, brez rje – kot bi bila pravkar dobavljena iz tovarne! Največja višina platforme 9,0 m, delovna višina 11,0 m, doseg 6,25 m, CE specifikacija, skupna širina 1,19 m, 355° rotacija obrata, 3D košarka, brez previsa, odobrena za notranjo in zunanjo uporabo, električni direktni pogon, platforma 0,76 x 1,17 m, skupna teža 5.770 kg, nosilnost 227 kg. Posebni premaz: RAL 5015 - nebo modra RAL 9006 - bela aluminij Ijdjxq Rm Topfx Af Tjtb - glejte priloženo shemo barv Naslednji deli ostanejo v standardnih barvah: AA Nadzorna omarica in električna plošča - Skyjack standard (siva) Hidravlični cilindri - Skyjack standard (črna)

Stanje: rabljeno, powered curve conveyor belt effective belt width: 1400 mm curve width (outer diameter): 3500 mm Itsdoumvunopfx Af Tob

Stanje: rabljeno, DEMAG dvižni motor / motor za žerjav. Dvižni motor tip - KBH 100 B 8/2 - 2 kosa. Itjdpsxpw Iuefx Af Tob

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MING1+11, nosilnost na konzolno roko: 1.000 kg, višina police: 3.050 mm, skupna dolžina: 21.000 mm, skupna širina: 2.150 mm, skupna višina: 3.050 mm, razmak osovin: 1.900 mm, nosilnost na stojalo: 7.500 kg, dolžina police: 21.000 mm, globina grla: 900 mm, skupna masa: 7.000 kg, Oprema: dvostranski, OHRA K60K - Double-sided Cantilever Rack for Long Goods / Heavy-Duty Rack Rack available 2x!!! 12 uprights - 48 cantilever arms K60K Height: 3.05 m - Uprights IPE200 - Upright spacing: 1.9 m (center to center) Itedjv Smk Ispfx Af Tjb Total depth approx. 2.15 m (double-sided) Arms: 90 cm - IPE100 Load capacity per arm: 1000 kg Load capacity per upright: 7500 kg Including wooden inserts Very good condition, see photos Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight carrier possible, please inquire with your postal code

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MING2/3/4/5/6/7, nosilnost na konzolno roko: 1.000 kg, višina police: 3.000 mm, skupna dolžina: 21.000 mm, skupna širina: 2.150 mm, skupna višina: 3.000 mm, razmak osovin: 1.480 mm, nosilnost na stojalo: 7.500 kg, dolžina police: 21.000 mm, globina grla: 900 mm, skupna masa: 6.000 kg, Oprema: dvostranski, Ohra - Double-sided Cantilever Rack, Long Materials Rack, Heavy Duty Rack Consisting of 15 uprights + 60 cantilever arms Height: 3.05 m – Uprights IPB200 (HEB200) – Upright spacing: 1.48 m center-to-center Total depth: 2.15 m (double-sided) Arms: 90 cm – IPE100 Load capacity per arm: 1,000 kg Load capacity per upright: 7,500 kg Wooden inserts can be supplied on request. Isdpfx Aov Smm Nof Tetb 6 racks available!!!! 4 with 4 levels – 60 arms each 2 with 6 levels – 90 arms each (+2,000€ surcharge) Very good condition, see pictures. Forklift available for loading. Collection by appointment only in 75053 Gondelsheim. Shipping via freight carrier possible, please inquire with your postcode.

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MING8+10 / 9, nosilnost na konzolno roko: 1.000 kg, višina police: 3.000 mm, skupna dolžina: 21.000 mm, skupna širina: 2.150 mm, skupna višina: 3.000 mm, razmak osovin: 1.480 mm, nosilnost na stojalo: 7.500 kg, dolžina police: 21.000 mm, globina grla: 900 mm, skupna masa: 6.000 kg, Oprema: dvostranski, Ohra - double-sided cantilever racking, long goods rack, heavy-duty rack Consisting of 10 uprights + 40 cantilever arms Height: 3.05m – Uprights IPB200 (HEB200) – Upright spacing 1.48m center-to-center Total depth: 2.15m (double-sided) Arm length: 90cm – IPE100 Load capacity per arm: 1000kg Upright load capacity: 7500kg Wooden inserts can be supplied upon request. Three racks available! No. 8+10 – 4 racks with 4 levels each – 40 arms No. 9 – 1 rack with 6 levels – 60 arms (+ €1,000 surcharge) Very good condition, see pictures. Forklift available for loading Iodpfxsv Smrxj Af Tetb Collection by appointment only in 75053 Gondelsheim Shipping via freight carrier possible, please inquire with ZIP code

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MING11, nosilnost na konzolno roko: 1.000 kg, višina police: 3.000 mm, skupna dolžina: 18.000 mm, skupna širina: 2.000 mm, skupna višina: 3.000 mm, razmak osovin: 1.500 mm, nosilnost na stojalo: 7.000 kg, dolžina police: 21.000 mm, globina grla: 900 mm, skupna masa: 6.000 kg, Oprema: dvostranski, Cantilever racking, long goods rack, heavy-duty racking – double-sided Consisting of 13 uprights + 52 cantilever arms Height: 3m – uprights: IPE200 – upright spacing: 1.5m center-to-center Total depth: 2m (double-sided) Arms: 90cm – IPE100 Load capacity per arm: 1,000 kg Load capacity per upright: 7,000 kg Arms are infinitely adjustable Itjdov Smr Sspfx Af Teb Includes cross beams from arm to arm, includes wooden inserts Very good condition, see pictures Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight carrier possible, please inquire with your postal code

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Rotary arm wrappers are state-of-the-art pallet and stretch film wrapping machines that utilize a powerful rotary arm in combination with a reliable pre-stretch system to achieve precise wrapping of pallets. This advanced technology allows the load to remain stationary during the wrapping process. As a result, rotary arm wrappers are particularly suitable for pallets with lightweight or unstable goods, as well as for loads that are difficult to maneuver. - Maximum product height: 2,000 mm Itsdpjr Nc Spefx Af Tjb - Maximum pallet dimensions: 1,200 x 1,200 mm - Minimum weight: 45 kg

Stanje: dober (rabljeno), - Pneumatic motor GAMOR - Reinforced arm structure made of hard aluminum (parallelogram design) - Table mounting column - Capacity: M2-M8 - Speed: 700 RPM - Working radius max: 1900 mm – min: 200 mm - Operating air pressure: max. 7 bar – 840 l/min - Weight: 18 kg The welding table shown in the pictures is not included in the sale; only the machine is being sold, which can be mounted onto another table or similar surface. Iodpfxexr A Ape Af Tstb

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 157 h, vrsta goriva: električni, JLG Toucan 800 A Električni pregibni dvižnik, delovna višina 8 m Neprestana zaloga, glejte spletno stran. Cene veljajo iz Nulanda. Van de Wert Trading B.V. ima raznoliko zalogo strojev, tovornjakov, prikolic in priključkov. Vsa naša dobava je po trgovinskih cenah, v stanju AS-IS, brez garancij. (glejte naše splošne pogoje) Za ogled in/ali poskusno vožnjo se lahko brez obveznosti dogovorite za termin. Prosimo, pokličite vnaprej, saj nismo stalno prisotni. Itjdpfx Afjx Hlg As Tsb Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Stanje: dober (rabljeno), Leto izdelave: 1998, obratovalne ure: 6.900 h, vrsta goriva: dizel, Teleskopska dvižna ploščad GENIE S-65 DEUTZ DIESEL 1998, delovna višina 21,81 metra Stalna zaloga, oglejte si spletno stran. Cene so EXW Nuland. Van de Wert Trading B.V. ima raznoliko zalogo strojev, tovornjakov, prikolic in priključkov. Vse dobave so po trgovskih cenah v stanju AS-IS, brez garancije. (glejte naše splošne pogoje) Za ogled in/ali testno vožnjo lahko brez obveznosti rezervirate termin. Ijdox Hlb Hepfx Af Totb Prosimo, pokličite vnaprej, saj nismo vedno prisotni. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Leto izdelave: 2019, Stanje: skoraj kot novo (rabljeno), We offer used and new cantilever racking systems as well as heavy-duty pallet racks. We are happy to prepare a customized quote for you. Please provide us with the following information: - Length and height of the desired racking system, - Number of storage levels, - Load capacity per shelf. Itjdjhr D Dtjpfx Af Teb If you have any questions, please do not hesitate to contact us. Images are sample photos.

Stanje: dober (rabljeno), Belt length: 3800 mm Itsdpfx Afjfd N U Rs Tsb Belt width: 600 mm Electrical power: 4 kW Belt speed: 80 m/min

Stanje: zelo dobro (rabljeno), Cantilever transport trolley Workshop trolley Height: 1650 mm Width: 780 mm Depth: 600 mm Itsdpfopkx Scex Af Teb Length of support arms: 300 mm Robust design

Leto izdelave: 2007, Stanje: rabljeno, Buffer conveyor RAU, system for crates 400 x 600 mm, year of manufacture: 2007, price: 4,850 euros, contact: Mr. Rainer Eckerle Isdpfx Afedhww Eo Totb

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, nosilnost na konzolno roko: 725 kg, nosilnost: 8.700 kg, višina police: 8.700 mm, skupna dolžina: 4.700 mm, skupna širina: 2.600 mm, skupna višina: 8.700 mm, razmak osovin: 1.500 mm, globina grla: 1.200 mm, nosilnost na odsek shranjevanja: 2.900 kg, Oprema: dvostranski, Konzolni regal v dobrem stanju Iedpfow Uf Emox Af Totb

Stanje: rabljeno, - Dokumentacija na voljo: Ne - CE-certifikat na voljo: Ne - Število stebrov [kos]: 15 - Število nosilcev [kos]: 16 - Dolžina roke [mm]: 1200 - Višina stebra [mm]: 3950 - Dolžina noge [mm]: 1500 - Širina med stebri [mm]: 1300 Finančne informacije DDV: Naveden cena je brez DDV DDV / obdavčitev razlike: DDV je odbiten za podjetja Dostava in odkup sta možna kadar koli za vse iz industrijskega področja Tess van den Boom Itedpfewub H Iox Af Tob

Stanje: novo, Nominal throughput up to 6000 kg/h Motor power: Elevator 2.2 (3.0) kW (HP), Mill 5.5 (7.5) kW (HP) Electrical connection: 400V 50Hz (3-phase) Electrical protection: 16 A Length: 1751 mm Width: 873 mm Height: 2447 / 2697 mm Feed height: 800 mm Weight: 420 / 450 kg Material: 1.4301 / AISI 304 Cleaning connection: ½ " female Connection for washing tank: 2 " male Mash discharge height: 1480 / 1730 mm Itjdpfxob Ncntj Af Teb Scope of delivery includes 7, 9, and 12 mm cutting screens.

Stanje: zelo dobro (rabljeno), skupna širina: 4.000 mm, skupna višina: 7.000 mm, razmak između stupova: 2.000 mm, dolžina police: 900 mm, Oprema: dvostranski, Sestavljen iz 3 dvostranskih stebrov višine 7000 mm 9 polic z nosilci dolžine 750 mm Nosilnost police: 900 kg Nosilnost nivoja: 2700 kg Isdpfx Asulufpef Tetb Nosilnost na prednjo stran stebra: 8100 kg Razmak med stebri: 2000 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) Itedped Tbbdjfx Af Tjb - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) Itjdpfsmhhx Isx Af Teb - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards Itsdpfx Ajmhhyajf Tsb - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg Itedpfxsh Ek Dae Af Tob - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards Itedpfx Afod Tqalj Teb - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Isdpfxjfdkb Ue Af Totb The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.