Konzolni Roko Pasu nakup rabljenega (2.531)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. Hodpfx Ajmhhx Ish Donu We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: dober (rabljeno), Cantilever racking OHRA 3 m high Over 100 meters in stock – see photos. Height: 3 m Arm length: 100 cm Load capacity per arm: 800 kg 4.5 linear meters, 4 uprights with arms Negotiable price: €2,160,-- / net The offer includes: 4 uprights with base, each 3 m high 4 adjustable arms per upright, each 100 cm, load capacity 800 kg/arm Diagonal braces, cross bracing, and spacers are included. Frame spacing: 150 cm Load capacity per upright side: 3,200 kg Heights of 2.5 m, 4 m, or 6 m available Other configurations available on request: Constant stock of over 3,000 linear meters of pallet racking from various manufacturers. Hjdpfx Ahocd Dwyo Djnu Transport and assembly available on request. (Subject to changes and errors in technical data, information, and prices as well as prior sale! Please see our terms and conditions; all prices excl. VAT ex stock.) Purchase / Sale We are constantly looking for or offering a wide range of products from various sectors - Swept clean site clearances - Company liquidations - Fast, flexible, efficient! We also clear or dispose for insolvency administrators. Send us a few keywords and we will get back to you promptly. To visit our page, please click on our logo!

Leto izdelave: 2021, Stanje: novo, Cantilever racking, single-sided, 3m height, 1.20m arms, 500kg per arm – New - : Price ex location incl. loading! 1 rack unit with 4 uprights €1,833 (net)! Transport price within Germany (excluding islands): €500 (net)! Of course, you can also build longer or shorter racking units by omitting or purchasing additional uprights (or by varying the bay spacing). This example with 4 uprights is simply the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: Single-sided racking upright, approx. 3,000 mm high, hot-dip galvanized, IPE 160 Foot and arm depth 1200 mm, each with 3 height-adjustable arms Load capacity at 600mm load center: 500 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 500 kg = 2,000 kg, arms IPE 80 Hsdpfxjddmpvo Ah Denu With longitudinal and diagonal braces, bay spacing = 1,300 mm (standard = 1.30m). Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! A small surcharge applies for bay lengths from 1.50m upwards! Special sizes (other bay spacings) are also available on request, but are subject to a surcharge and have a longer delivery time as they must be custom-made! If you do not specify a different bay spacing, the rack will be delivered with 1.30m bay spacing. With 4 uprights (3 bays), the total length is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany via parcel service, direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Stanje: zelo dobro (rabljeno), Height: approx. 2000-4500 mm Width: approx. 1130 mm Usable depth: 1 x 1000 mm Upright load capacity: up to 3000 kg Arm load capacity: up to 500 kg 6 storage levels including base Single-sided design Bolted base profiles Hnjdpfxop Dukqe Ah Dsu Made from hot-rolled IPE sections Finish: high-quality industrial paint RAL 5010 Cantilever arms freely adjustable in 100 mm increments Racking uprights: base and cantilever arms bolted Increase in storage capacity with reduced floor space Organized storage of long goods Price: €400/net per upright, incl. We will assemble your custom racking system. Feel free to contact us. We also buy used racking. Please send photos and dimensions—we’ll make you an offer. Contact: Brennholz Blum - Mr. Dominik Blum Upon request, we can also deliver your racking. If you have any questions, just call or write us.

Stanje: rabljeno, Novo: Ne Hnodpfx Ahjw S R Izs Dou Primerno za: Dvižni mehanizem

Stanje: zelo dobro (rabljeno), nosilnost na konzolno roko: 330 kg, višina police: 2.500 mm, razmak osovin: 1.250 mm, dolžina police: 5.200 mm, Cantilever Rack H 2500 mm Manufacturer: BITO Hnedpfjwzzrqex Ah Dju Length: approx. 5.2 meters Height: 2500 mm Load capacity per arm: 330 kg Cantilever arms, length 600 mm Column spacing: approx. 1250 mm Total rack depth: 1340 mm The cantilever rack consists of: * 5 columns with base, made from IPE 140 profile, column height 2500 mm * 35 cantilever arms, length 600 mm, load capacity per arm 330 kg * Braces, bolts, connectors Total weight: approx. 500 kg Price: 1,000 EUR net 2 sets available

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm Hnodpfx Ahjd Tbbde Deu - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: novo, OHRA Cantilever Racking Negotiation Price: €5,940.00 net ex stock You are bidding on a rack with a length of 7.5 m, comprising: - 6 uprights with base, 6 m high - 4 adjustable cantilever arms per upright (120 cm), load capacity 900 kg per arm. Diagonal braces, stiffeners, and spacers are included. Bridges, wire mesh, and chipboard shelves are available separately at an additional cost! Frame spacing: 150 cm Arm length / Cantilever: 120 cm Load capacity: 900 kg / arm Load capacity per upright per side: 3,600 kg Over 100 meters available. Heights of 2.5 m, 3 m, or 4 m also available. Other configurations on request. (Specifications, technical data, and prices are subject to change and availability. Please refer to our General Terms and Conditions. All prices are ex works, excluding VAT.) Purchase / Sale We are constantly seeking and offering a wide range of items from various sectors: - Machines from all industries - Surplus stock - Special lots - Thoroughly swept company clearances - Company liquidations - Purchase of excess stock Fast – flexible – efficient! We also clear out and/or dispose for insolvency administrators. Hjdjby Uunepfx Ah Donu Send us a brief enquiry and we will get back to you immediately.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2486808, Leto izdelave: 2021, obratovalne ure: 1.858 h, nosilnost: 4.999 kg, vrsta goriva: dizel, gradbena višina: 3.090 mm, moč: 98,56 kW (134,00 KM), dolžina vilic: 1.200 mm, skupna masa: 16.500 kg, skupna višina: 3.090 mm, skupna dolžina: 6.570 mm, Oprema: kabina, vilice za palete, Technical Specifications Year of manufacture: 2021 Maximum lifting capacity: 4,999 kg Maximum lift height: 20.70 m Rotation: 360° Rated power: 100 kW – 134 hp Displacement: 3.5 l Number of cylinders: 4 Engine type: Diesel with direct injection Maximum travel speed: 40 km/h Hnodpfow Dzw Esx Ah Dou Gross weight: 16,500 kg Overall dimensions (L x W x H): 6.57 x 2.50 x 3.09 m Fork length: 1.20 m Fully operational General signs of use

Leto izdelave: 2010, Stanje: dober (rabljeno), USED CNC BIESSE BREMA EKO 902 INSERT TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER - Full protection of the operating head and the working area on the machine - Numerical control (CNC) with BIESSE Works software on Windows - Vertical panel positioning with 2 panel clamping vices - Panel feed (in the X-axis direction, on the lower support with rubber rollers), movement of clamping vices (in X-axis) for panel/workpiece fixing WORKPIECE DIMENSIONS (WORKING RANGE): - Length Min 160 mm / Max 3200 mm - Width Min 35 mm / Max 900 mm - Thickness Min 8 mm / Max 80 mm WORKING UNITS: - No. 1 vertical spindle (electrospindle) ER32 (4.5 KW) with inverter (up to 18000 RPM) - No. 1 circular saw (for grooves), 120 mm diameter (fixed on X-axis) - No. 13 independent vertical drilling spindles (6 on X-axis + 7 on Y-axis) - No. 8 independent horizontal drilling spindles (3+3 on X-axis and 1+1 on Y-axis) - No. 1 drilling head for hinge boring Hnjdpfx Aehknbroh Dju - Total installed power: 20 KW AUTOMATIC DOWEL INSERTION UNIT ON BOTH SIDES WITH PRESSURE PUMP FOR GLUE APPLICATION.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 1.685 h, nosilnost: 3.000 kg, dvižna višina: 9.000 mm, vrsta goriva: dizel, tip droga: teleskopski, Oprema: pogon na vsa štiri kolesa, No UVV-relevant defects! Application: Indoor, outdoor, and off-road use TECHNICAL DETAILS Lifting height: 9.60 m Max. reach: 6.50 m Max. load capacity: 3,000 kg Load capacity at maximum reach: 1,000 kg Hsdev D Itbjpfx Ah Djnu Mast type: Telescopic Fuel type: Diesel Engine: Diesel MACHINE DETAILS Transport dimensions (L x W): 4.60 x 2.10 m Clearance height: 2.02 m Operating weight: 7,100 kg EQUIPMENT - 4x4 all-wheel drive - Off-road tires - All-wheel steering - Cab with heating

Leto izdelave: 2019, Stanje: kot nova (razstavni stroj), Aluminum incline conveyor 35° including support frame Dimensions: 1500 + 3055 x 400 mm * Optional with magnetic deflection roller at the end of the conveyor belt. Hodpfx Ajd Dzddeh Dsnu * Custom designs available in all configurations.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg Hsdpfsmidyfjx Ah Djnu - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: novo, Leto izdelave: 2022, Jungheinrich, Kongamek Cantilever Trolley Drying Rack for Boards – Ideal for Carpenters, Joiners, or Timber Framers Jungheinrich Part Number: 167793-4A Multiple units available 3 packages, can be shipped 14 shelves Arm diameter: 20 mm Assembly height: 1770 mm Hsdpfsvntzxsx Ah Donu External dimensions: height 1960 mm, length 1520 mm Frame width / external depth: 860 mm Load capacity per tier: 20 kg Net weight: 73 kg Supplied disassembled

Stanje: dober (rabljeno), Bosch Turbo Scara SR8 rotacijski robotski roka Proizvajalec: Bosch Št. naročila: 3842999836 Serijska št.: 3810333 Hod*Pinola: 400*25 Obratovalni tlak max.: 8 bar Hnedpfxsg D Tu Ie Ah Dsu Največja obremenitev: 8 kg Teža: 51 kg Obseg vrtenja: glej sliko Nameščeno na osnovnem ogrodju iz alu-profila. Stanje artikla: rabljeno Roboti so bili pri velikem avtomobilskem dobavitelju skladiščeni kot rezervni stroji za izpad, zato so v zelo dobrem stanju. Poleg približno 50 paternosterjev je na voljo tudi brezšteto drugih strojev, kot so stiskalnice, roboti, peči, industrijski sesalniki ipd. Na voljo je obsežna delavniška oprema, delovne mize, delavniški vozički, orodje, viličarji in regali. Skupno je predmet prodaje zmanjšanje in likvidacija 24.000 m² proizvodnih površin. Oglejte si tudi naše druge ponudbe. Po nakupu je znesek zapade plačilu v roku 7 delovnih dni. Več artiklov – novih in rabljenih – najdete v naši spletni trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C7004367, Leto izdelave: 2019, obratovalne ure: 1.706 h, nosilnost: 3.800 kg, dvižna višina: 13.800 mm, doseg roke: 8.600 mm, Oprema: bočni pomik, TECHNICAL DETAILS Lifting height: max. 13.80 m Reach: max. 8.60 m Load capacity: max. 3,800 kg Load capacity at full reach: max. 800 kg Drive and Engine Engine: Diesel (Kubota engine) Drive: 4x4 all-wheel drive Steering: All-wheel steering Hnjdpovr Tdzofx Ah Dsu Tyres Tyre condition (FR/FL, RR/RL): approx. 75% Type: Off-road tyres MACHINE DETAILS Transport dimensions (L x W): 5.24 x 2.22 m Clearance height: 2.44 m Operating weight: 8,900 kg Operating hours: 1,706 h (as of: 20/01/2025) Previous owner: First owner Cosmetic condition: Good Technical condition: Good Application areas: Indoor, outdoor, rough terrain Maintenance and Inspections Last service: 11/2024 Last safety inspection (UVV): 11/2024 UVV valid until: 11/2025 Condition: No UVV-relevant defects EQUIPMENT - Towing hitch - Heater - 4x4x4 drive - Kubota engine - Quick coupler - Self-levelling system - Outriggers - Merlo sideshift - All-wheel steering - Cab with heater

Leto izdelave: 2019, Stanje: kot nova (razstavni stroj), Aluminium flat conveyor belt including substructure. Dimensions: 6000 + 620 x 105 mm Hjdpfxed Ra Uao Ah Dsnu Conveyor belt width: 500 mm PVC conveyor belt with cleats, sidewall, and sealing tape included. V2A stainless steel feed hopper at the beginning of the conveyor belt. * Optionally available with magnetic deflection roller at the end of the conveyor belt. * Optionally available as an incline conveyor. * Custom designs in all configurations possible.

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments Hodpfeqt Dmysx Ah Djnu - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: zelo dobro (rabljeno), Bosch Turbo Scara SR6 Swivel Arm Robot The SR6/SR8 robotic system consists of a robust robotic mechanism with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), the robot is ideal for assembly tasks and fast pick & place operations. The turboscara SR6 and SR8 are swivel arm robots (SCARA robots) with four axes offering the following advantages: • Minimal cycle times with maximum precision • Large working envelope and various stroke options • Defined mechanical interfaces • PC control with extensive communication possibilities • Compliant with international standards • Brushless drive technology reduces maintenance • Integrated user installation, optional: gripper for connecting a tool connector • Integrated safety technology (Safety Class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is easy to learn and enables clear, understandable program creation; new with BAPSplus: graphical programming interface • Expandable via compact and flexible I/O modules: B~IO modules or decentralized CAN I/O modules • Expandable with the VTS02 valve block system featuring CAN interface for time-saving installation Technical data: Rated load: 2 kg Maximum load: 8 kg Rated moment of inertia (Axis 4): 500 kgcm² Maximum moment of inertia (Axis 4): 1000 kgcm² Horizontal force, continuous/max: 60/150 N Vertical force, continuous/max: 200/300 N Torque (Axis 4), continuous/max: 5/10 Nm Weight: 48.5 kg Maximum Speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Hodpfx Ashtrdceh Denu Cycle time (Cycle 25-300-25): < 450 ms Controller consists of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S More articles – new and used – can be found in our shop! International shipping costs upon request!

Leto izdelave: 2019, Stanje: kot nova (razstavni stroj), Aluminium flat conveyor belt incl. 4 suspension points Hsdpfx Asd Ra Trjh Denu Dimensions: 3000 + 520 x 105 mm Conveyor belt width: 400 mm PVC conveyor belt incl. cleats and wave edge * Optional with magnetic deflection roller at the end of the conveyor belt. * Optional with supporting frame * Custom-made versions in all designs possible.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Hnsdjmhhl Hepfx Ah Dou Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: dober (rabljeno), Bosch Turbo Scara SR6 Swing Arm Robot The SR6/SR8 robot system features a robust robotic mechanism with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), this robot is ideal for assembly operations and fast pick & place tasks. The turboscara SR6 and SR8 are four-axis swing arm robots (SCARA robots) offering the following advantages: • Minimal cycle times with maximum precision • Large working envelope and various stroke options • Defined mechanical interfaces • PC control with versatile communication capabilities • Compliant with international standards • Brushless drive technology reduces repair needs • Integrated user installation, optional: gripper for tool connector integration • Integrated safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is easy to learn and enables the creation of clear, comprehensible programs; new with BAPSplus: graphical programming interface • Expandable using compact, flexible I/O modules: B~IO modules or decentralized CAN I/O modules • Extendable via VTS02 valve block system with CAN connection for time-saving installation Technical Data: Rated payload: 2 kg Maximum payload: 8 kg Rated moment of inertia (axis 4): 500 kgcm² Maximum moment of inertia (axis 4): 1000 kgcm² Horizontal force: continuous/max 60/150 N Vertical force: continuous/max 200/300 N Torque (axis 4): continuous/max 5/10 Nm Weight: 48.5 kg Hnsdjhtyyispfx Ah Deu Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Mounted on an aluminum profile base frame. Item condition: used The robots were kept in storage at a major automotive supplier as backup replacement units; accordingly, they are in very good condition. H1R6D3 Further items – new and used – are available in our shop! International shipping costs on request!

Leto izdelave: 2019, Stanje: kot nova (razstavni stroj), Aluminium flat belt conveyor including 4 suspension points Dimensions: 6000 + 520 x 105mm Belt width: 400mm PVC conveyor belt including cleats and wave edge Hodpfjd Ra Ttjx Ah Dsnu * Optionally available with a magnetic tail pulley at the end of the conveyor belt. * Optionally available with subframe. * Custom-made versions in all configurations possible.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard Hodpemkixwefx Ah Dsnu - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm Hnsdpfoh Ek Dajx Ah Deu - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.