Koncentriranost Test Instrumenta nakup rabljenega (10.747)

Obratovalne ure: 3.888 h, stanje: dober (rabljeno), Heraeus naprava za preizkušanje vremenske odpornosti Xenotest 1200 CPS Xenonska naprava za testiranje svetlobne obstojnosti in vremenske odpornosti materialov v simuliranih pogojih Električni priključek Napetost: 400 V Nazivni tok: max. 50 A Priključna moč: max. 33 kVA Poraba moči xenonskih svetilk: 2,8 - 6 kW na svetilko Kompenzacija: 3 kondenzatorji po 50 uF Obratovalne ure: 3888 Fedpfx Abjxal Haovsfw Financiranje preko naše banke je prav tako možno. komplett-konzept.leasingo.de Več artiklov – novih in rabljenih – najdete v naši trgovini! Mednarodni stroški pošiljanja na zahtevo!

Stanje: dober (rabljeno), Large-scale climatic test facility with S!MCON control system Construction The system consists of the following main assemblies: - Walk-in, insulated test chamber - Air treatment chamber - Machine unit - Climate control system - Control cabinet Test Chamber The fixtures in the test chamber are made of corrosion-resistant material. The test chamber is walk-in, can be illuminated, and is equipped with a condensate water and cleaning drain. Air Treatment Chamber The air treatment chamber is located behind the air baffle within the insulated interior. It contains the components necessary for temperature conditioning and is accessible via easily removable panels: - Test chamber fans - Heat exchanger - Electric heaters - Air supply and exhaust system - Temperature sensors Within the air treatment chamber, the air is conditioned (heating/cooling), humidified and dehumidified, and circulated by fans. The air is drawn in at the ceiling and discharged at the floor level. Sensors Temperature and humidity sensors are located behind the air baffle in the air treatment chamber. Machine Unit The machine unit, consisting of refrigeration units, supplies the required energy to the air treatment chamber. Climate Control System The climate system consists of: - Steam humidifier - Dehumidification evaporator Fodpfx Abjw U Sv Eevjfw Technical Data Test chamber volume: approx. 32 m³ Direct temperature range: -40 to +100°C Temporal temperature fluctuation at chamber center: +/- 0.5 to +/- 1 K Temperature change rate Heating: from -35°C to +50°C at 3 K/min Cooling: from +85°C to +85°C at 2 K/min from +80°C to -40°C at 1 K/min Climatic Test Data Temperature range: 10 to 95°C Humidity range: 10 to 95% rH Dew point range: 5 to 93°C Temperature fluctuation: +/- 5 K Humidity fluctuation: +/- 3 to +/- 5% rH Chilled Water Data Connections Supply: 2 x R 1 1/2 2" Return: 2 x R 1 1/2 2" Consumption at full load: max. 16 m³/h Maximum test chamber floor load: 10,000 N/m² Rated voltage: 3/N / PE AC 400 V 50 Hz Rated power: 97 kW Rated current: 148 A Dimensions: Test chamber: width 3.60 m, height 2.20 m, depth 5 m The climatic chamber is divided for transport at the designated location (approx. 2.50 m). Financing through our partner bank is also possible. komplett-konzept.leasingo.de Find more new and used items in our shop! International shipping costs on request!

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Binder KBWF 240 Growth Chamber Features: - Temperature range: 0°C to 70°C - Humidity range: 10% r.h. to 80% r.h. - APT.line preheating chamber technology - Adjustable fan speed - Humidity control with capacitive humidity sensor and steam humidification - Intuitive touchscreen controller with interval and real-time programming, with internal data logging - Display via LCD color monitor - Airtight inner door made of safety glass (ESG) with special TIMELESS coating - 2 stainless steel shelves - Access port with 30 mm silicone stopper, left side - Class 3.1 (DIN 12880) temperature safety device with visual and acoustic temperature alarm - Computer interface: Ethernet - Door heating Ffjdpfx Abjvtlq Novsw Maximum load: 51–100 kg External width: 925 mm Internal width: 650 mm External height: 1465 mm Internal height: 785 mm External depth: 800 mm Internal depth: 485 mm Internal volume: 201–300 l Weight: 214.00 kg Year of manufacture: 2010 Manufacturer's price: €27,909.06 Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more products—new and used—in our shop! International shipping costs on request!

Stanje: dober (rabljeno), Leto izdelave: 1999, Nema korozijska preizkusna komora za preizkuse s solno meglo Proizvajalec: Nema Tip: NSN 300 Nazivna napetost: 400 V Nazivni tok: 11 A Stisnjen zrak: 8-10 bar Poraba zraka: 6 Nm³/h Vlažilec zraka: 0,5 l/h Tlak vode: 2-8 bar Moč: 5,6 kW Solna raztopina: NaCl: 50 ± 5,6 kW Zunanje mere (ŠxDxV): 3200 x 1200 x 1900 mm Notranje mere preizkusne komore (ŠxDxV): 3100 x 1000 x 880 mm Teža: 390 kg Možno financiranje preko naše banke. komplett-konzept.leasingo.de Dodatni artikli v drugih velikostih - novi in rabljeni - so na voljo v naši trgovini! Fsdpfxou Ecrxo Abvefw Mednarodni stroški pošiljanja na zahtevo!

Leto izdelave: 1997, stanje: dober (rabljeno), Vötsch VTR 7033/S Temperaturna testna komora Ffjdpfxeuuiv Ij Abvew Proizvajalec: Vötsch Tip: VTR 7033/S Št. artikla: 60885637 Temperaturna komora Temperaturno območje: -70°C do +180°C Omrežna napetost: 400V Nazivni tok: 24A Nazivna moč: 9,5 kW Hladilno sredstvo VK: R 404 A Hladilno sredstvo TK: R 23 Letnik: 1997 TK 08 Možno je tudi financiranje preko naše banke. complett-konzept.leasingo.de Več artiklov – novih in rabljenih – najdete v naši trgovini! Stroški mednarodne pošiljke na zahtevo!

Stanje: dober (rabljeno), Vötsch VCS 4100 Klimatska preizkusna komora -40 °C do +180 °C Proizvajalec: Vötsch Model: VCS 4100 Ffodpfxsuuiygj Abvjw Temperaturno območje: -40 °C do +180 °C Omrežna napetost: 400 V Nazivni tok: 17 A Nazivna moč: 11 kW Hladilno sredstvo: R404A KK-07 Financiranje preko naše banke je možno. komplett-konzept.leasingo.de Več artiklov – novih in rabljenih – najdete v naši trgovini! Cena mednarodne dostave na zahtevo!

Stanje: dober (rabljeno), Heraeus Vötsch HC 4055 temperaturna preizkusna komora Proizvajalec: Heraeus Vötsch Tip: HC 44055 Temperaturna komora Temp. območje: do +180 °C Nazivna napetost: 380 V, ±10 %, 3/N, 50 Hz Nazivni tok: 13,5 A Nazivna moč: 9 kW Dimenzije ohišja: Š 1065 x G 1560 x V 1890 mm Ffedpfjuuilvjx Abvjw Opazovalno okno: širina x višina 350 x 640 mm Preizkusni prostor: (D x G x V) cca 800 x 795 x 855 mm Volumen preizkusnega prostora: 550 l Komora je hlajena z zrakom Pozor Komoro je mogoče uporabljati samo kot peč. Hladilni krog je prazen in deaktiviran. Klimatski sistem je izključen. Odklopljeni kontaktorji: 03K2 kompresor 03K5 kond. ventilator 15K6 grelnik lopute Polprevodniški rele 21V4 vlažilnik. Teža cca 550 kg Možno financiranje preko naše banke. komplett-konzept.leasingo.de Več novih in rabljenih artiklov najdete v naši trgovini! Mednarodne stroške pošiljanja na zahtevo!

Leto izdelave: 2002, stanje: dober (rabljeno), Vötsch VTSR 7034/S Klimatska preizkusna komora -70 do +180°C Proizvajalec: Vötsch Tip: VTSR 7034/S Prostornina testne komore: 335 litrov Klimatska preizkusna komora Temperaturno območje: -70 do +180°C Fjdpfx Abjuuif Nevjfw Omrežna napetost: 3/N/PE AC, 400 V ±10 %, 50 Hz Nazivni tok: 22 A Nazivna moč: 12,5 kW Hladilno sredstvo VK: R 404 A Hladilno sredstvo TK: R 23 Dimenzije notranje komore: širina 580mm, globina 765mm, višina 750mm Zunanje dimenzije: širina 870mm, globina 1595mm, višina 1775mm Letnik izdelave: 2002 TK-11 Možno tudi financiranje preko naše banke. komplett-konzept.leasingo.de Več artiklov - novih in rabljenih - najdete v naši trgovini! Mednarodni stroški pošiljanja na zahtevo!

Leto izdelave: 1996, stanje: zelo dobro (rabljeno), Vötsch VSKZ 04/120/S prehodna klimatska testna komora Ffedpfx Abeuuigyovsw Proizvajalec: Vötsch Tip: VSKZ 04/120/S Temperaturno območje: od -40°C do +120°C Omrežna napetost: 400V Nazivni tok: 95A Nazivna moč: 56 kW Hladilno sredstvo: R 404 A Leto izdelave: 1996 Zunanje mere: Š 2850 x G 4100 x V 3080 mm SO-01 Možno financiranje preko naše banke. complett-konzept.leasingo.de Več izdelkov – novih in rabljenih – najdete v naši trgovini! Stroški mednarodne dostave na zahtevo!

Leto izdelave: 2000, stanje: dober (rabljeno), Nema temperaturna šok komora -40°C do +120°C Ffedpfx Aouuiayobvsw Proizvajalec: Nema Tip: NTS 3000 / 2S Temperaturno območje: -40°C do +120°C Omrežna napetost: 400 V Nazivni tok: 88 A Nazivna moč: 55 kW Hladilno sredstvo: R 404 A Leto izdelave: 2000 Teža: 5000 kg Zunanje mere: Š 4000 x G 2760 x V 3450 mm Komora: Š 3000 x G 1250 x V 1610 mm TS-06 Financiranje preko naše banke je mogoče. komplett-konzept.leasingo.de Več artiklov – novih in rabljenih – najdete v naši trgovini! Stroški mednarodne dostave na zahtevo!

Stanje: zelo dobro (rabljeno), Weiss SC 1000/+20 IU Corrosion-Climate Alternating Test Chamber Weiss SC 1000/+20 JU Corrosion-Climate Alternating Test Chamber The test system combines a climate test chamber with variable temperature and humidity and a corrosion test chamber with a salt spray test. In accelerated testing, susceptible metallic components are inspected for corrosion in accordance with relevant standards. Temperature Operating Range Temperature: +20 °C ... +60 °C temporal temperature deviation: ±0.5 K Climate Operating Range Temperature: +20 °C ... +60 °C temporal temperature deviation: ±0.5 K relative humidity: 10...98 % r.h. temporal humidity deviation: 3...5 % r.h. dew point: +12 °C ... +59 °C Salt Spray Test SS (temperature range: ambient temperature +5 K ... +50 °C) according to DIN 50 021 (salt mist via 2-substance nozzle, 1.5 x 0.5 m V80 cm³/h) Control Digital measuring and control system SIMCON/32*-Net with touch control panel Fedpfx Abjph U Dhevefw Interfaces - serial interface RS 232 C - parallel printer interface Operating modes adjustable via process controller: - Temperature mode - Climate mode - Salt spray test - Direct spraying with saline solution - Condensation water load - Rinsing of test chamber walls - Drying/ventilation of the test chamber Temperature sensor: Pt 100 resistance thermometer Humidity sensor: psychrometric fresh measurement device tft’ (with forced humidification) Technical Data SC 1000/+20 JU Internal dimensions Height up to eaves approx. 1000 mm + roof approx. 350 mm Width approx. 1100 mm Width between heaters approx. 1000 mm Depth approx. 1000 mm Test chamber door made of glass, hinged on the left Height approx. 1350 mm Width approx. 1000 mm External dimensions including aggregate parts and control cabinet Height approx. 2100 mm Width approx. 1450 mm Width with touch panel approx. 1700 mm Depth approx. 2600 mm Maximum floor load 100 kg Brine storage tank approx. 200 l, with level monitoring, located separately next to/behind the unit Height approx. 1000 mm Width approx. 600 mm Depth approx. 900 mm Electrical connection: 400 V Connected load: 13 kW Weight: 1300 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2012, Parker Engineering & Design navpični svetlobni modul Za testiranje sončnih oziroma fotonapetostnih modulov Preverjanje električne in mehanske varnosti Podpora pri razvoju izdelka, načrtovanju in kontroli kakovosti Zaznavanje morebitnih težav že med razvojem Kontrola kakovosti in varnosti Dolgotrajna testna postaja Nadzor temperature Premično na kolesih Žepki za viličarja 400 VAC, 3 faze, 50 AMP IR. 10.000 Amp Leto izdelave 2012 Teža 1400 kg Mere (V x Š x G): 2900 x 1700 x 1900 mm Možnost financiranja preko naše banke. komplett-konzept.leasingo.de Druge testne naprave – nove in rabljene – so na voljo v naši trgovini! Ffjdpfx Abeh Rvh Sevsw Mednarodni stroški dostave na zahtevo!

Stanje: dober (rabljeno), Resato HBU-B160 High-Pressure Gas Workshop Test System In the oil and gas industry, everything revolves around the extraction of crude oil and natural gas. One of the challenges is to optimize the use of facilities in order to produce more from the available resources. Various high-pressure applications can contribute to this. Pressure testing ensures the quality and safety of components used in oil and gas production. By injecting a chemical fluid, the well is stimulated. With its controls, the high-pressure system manages and regulates backpressure and liquids. This enables safer extraction of oil and gas. Manufacturer: Resato Test system: HBU Model: HBU-B160 Max. pressure: 200 bar Max. capacity: 1570 cc/ Max. pressure: 7 bar Fsder Hmihopfx Abvjfw 2 x gas cylinder holders 3 x gas cylinder trolleys Digital control panel missing Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more new and used items in our shop! International shipping costs on request!

Stanje: zelo dobro (rabljeno), Zwick/Roell Zwick/Roell ProLine 10 kN Universal Testing Machine – testXpert II V3.61 Description: For sale is an electromechanical universal testing machine Zwick/Roell ProLine with a nominal force of 10 kN, equipped with a Zwick/Roell Xforce-P load cell and the material testing software testXpert II, version 3.61. This system is suitable for standardized and customized materials testing in quality assurance, research, development, and production. Thanks to its modular construction, various test methods and fixtures can be used. Software – Zwick/Roell testXpert II V3.61 The machine is controlled via the professional test software testXpert II V3.61. This software is the industry standard in materials testing and enables: - Creation, management, and execution of test specifications - Force, displacement, and time measurement in real time - Automatic test sequence control - Graphical representation of test curves - Standard-compliant evaluation and test reports - Export of measurement results (e.g. PDF, CSV – depending on configuration) The system contains several test specifications (e.g. tensile, compression, and calibration procedures), as can be seen in the software screenshots. Possible test methods With the included equipment, the following tests can be performed, among others: - Tensile test (e.g. plastics, metals, composites) - Compression test - Bending test - Determination of Fmax / breaking force - Force and displacement monitoring Fodpsyc R R Dofx Abvefw - Calibration and adjustment procedures for load cells (Test procedures depend on the clamping tools and fixtures used) Technical data Manufacturer: Zwick/Roell Model: ProLine Nominal force: 10 kN Load cell: Zwick/Roell Xforce P Sensitivity: 2 mV/V Electrical data: Power supply: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Dimensions & weight (approx.) Height: approx. 1,900 mm Width: approx. 800 mm Depth: approx. 700 mm Weight: approx. 200 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: - Zwick/Roell ProLine 10 kN testing machine - Xforce-P load cell (10 kN) - Control unit - PC with testXpert II V3.61 - Fixtures / tools as shown in the pictures (Technical data subject to change and errors excepted!) We are happy to answer further questions for you by phone.

Leto izdelave: 2018, stanje: dober (rabljeno), Testna oprema, ki se uporablja za zagotavljanje kakovosti in proizvodnje v serijskem procesu montaže menjalnikov. Oprema vključuje univerzalnega robota, kamerni sistem in lastno krmilno enoto. Oprema je lahko ponovno programirana, da izpolni zahtevane postopke naročnika. Ffsdsh D Ezgopfx Abvow

Leto izdelave: 2021, stanje: zelo dobro (rabljeno), Weiss Type: TempEvent T/340/40/3/S Air-cooled Temperature Test Chamber Weiss Technik TempEvent T/340/40/3/S Temperature Test Chamber −40 to +180 °C Year of manufacture 2021 Description – Function & Application: For sale is a professional temperature test chamber, Weiss Technik TempEvent T/340/40/3/S. This unit is designed for controlled heating and cooling of test specimens under reproducible conditions. It is used in industry, laboratories, and development to test the temperature behavior, functional reliability, and load capacity of products. Typical applications: - Temperature and functional testing of lithium batteries and accumulators - Testing of electronics, assemblies, and components Ffsdpeycvd Nefx Abvew - Quality, endurance, and stress testing - Research and industrial quality assurance The chamber is air-cooled and features a recirculation system to ensure uniform temperature distribution within the interior. Operation is via an integrated touch control panel with programming and monitoring functions. The chamber is equipped with a reinforced safety door with viewing window. Certified explosion protection (e.g., ATEX / tertiary explosion protection) is not specified. Suitability for special tests – especially battery or safety tests – is the responsibility of the operator. The unit has been inspected, serviced, and is fully operational. Technical data (excerpt): Manufacturer: Weiss Technik Type: TempEvent T/340/40/3/S Year of manufacture: 2021 Temperature Specifications for temperature testing: Temperature range: -40°C to +180°C Temperature change rate, cooling: 4.0 K/min Temperature change rate, heating: 3.2 K/min Cooling: air-cooled Refrigerant: R449A (approx. 2.5 kg) Electrical data: Rated voltage: 3/N/PE AC 400 V ±10% / 50 Hz Rated current: 12.5 A / Rated power: 4.1 kW Equipment features: - Stainless steel interior - Recirculating fan for homogeneous temperature distribution - Reinforced safety door with viewing window - Touch control panel - Status signal light Dimensions & Weight (approx.): Test chamber dimensions: Height 750 mm x Width 580 mm x Depth 450 mm Housing dimensions: Height 1800 mm x Width 895 mm x Depth 1810 mm Test chamber volume: approx. 335 liters Refrigerant: R449A & R23 Weight: approx. 470 kg Important safety information for buyers: The following points are undertaken in advance for our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Modifications and errors in the technical data and information reserved!) We are happy to answer further questions by phone.

Stanje: pripravljen za uporabo (rabljen), Reicherter Wolpert Hardness Testing Machine Hardness Tester Manufacturer: Reicherter Model: Briro VA II Load ranges: 50 – 100 kgf, 62.5 – 187.5 kgf, 100 – 250 kgf Manufacturer: Wolpert Model: Dia Testor 2n Throat depth: 150 mm Fsdpfx Asx U Tlvebvsfw Test chamber height: 300 mm Brinell (ISO 6506) 5/10/15.625/30/31.25/62.5/187.5/250 Vickers (ISO 6507) 5/10/20/30/40/50/125 Accessories: See pictures Viewing by appointment is welcome. We are happy to organize affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued upon provision of a valid VAT ID number. Sale subject to prior sale. Visit our shop and see our other offers as well. Brand names and trademarks mentioned are property of their respective owners and are used solely for identification and description purposes. Technical data deviations and errors in the description may occur and are subject to change.

Stanje: zelo dobro (rabljeno), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test Chamber CSR-60/810/S | –60 °C to +170 °C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature test system from CTS GmbH, consisting of a conditioning unit model CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, development, and laboratory applications, such as automotive, electronics, component, and material testing. It enables precise temperature and climate simulation across an extremely wide operational range. This is a professional climate and temperature conditioning system by CTS GmbH, comprising: - Conditioning unit (CSR-60/810/S) - External test chamber (1200 L test chamber) The system is designed to supply external test rooms or chambers with accurately regulated temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical data (from nameplate & manual): Fodpfx Asya Ev Nsbvofw General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate: Temperature range: –60 °C to +170 °C Humidity range: 10% to 80% r.H. Dew point range: +5 °C to +74 °C Electrical Data: Nominal voltage: 400 V / 3-phase / N / PE / 50 Hz Nominal power: 39.6 kW Nominal current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System: Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection rating: Conditioning unit: IP54, Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg Test chamber 1200 L: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t For your safety as a buyer, the following information applies! The following work is carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: (see image) (Specifications and technical data subject to change and errors excepted!) Please feel free to call us with any further questions.

Stanje: zelo dobro (rabljeno), CTS CW-60/5.5 – Climatic Test Chamber, Water-Cooled Fedpfxjx Eabpo Abvsfw The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description The climatic test chamber enables the testing of the functionality or material properties of test items under varying temperature and humidity conditions. Efficient air circulation with a high recirculating air volume ensures optimal heat and moisture transfer to the test specimens. The air conditioning unit is located at the rear of the inner chamber. Aggregates are situated behind the chamber on a separate frame and are easily accessible. The control system is housed in a separate electrical cabinet, with the control panel integrated into the cabinet door. For dehumidifying the test area, the chamber is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied to the test area via a blower for purging purposes. Technical Performance Data: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Rate of temperature change (linear, with test items and heat radiation measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, nominal voltage 400 V, without test items, radiation or additional equipment. Dimensions: Internal dimensions (test / usable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection class: IP 54 Technical Features: - Cooling unit: water-cooled, low noise, semi-hermetic, stepless power adaptation via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404A Additional Information: - Viewing by appointment (46325 Borken) - Shipping via freight carrier available – cost & organization upon request - Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/5.5 – Climatic Test Chamber, Water-Cooled The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting temperature and humidity tests on multiple specimens simultaneously. Device description: The climatic test chamber allows you to test the function or material properties of a test item under the influence of temperature and humidity. Efficient air circulation with an appropriately high recirculation volume ensures optimal heat transfer to the test specimen. The air treatment section is located at the rear of the interior chamber. The units are housed in a separate frame behind the machine for easy access. The control unit is installed in a separate control cabinet. The control panel is integrated into the cabinet door. To dehumidify the test chamber, the system is equipped with a self-regenerating compressed air dryer. The test chamber can be flushed with fresh air via a blower. Technical specifications: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ±0.5 to 1 K over time Temperature change rate, linear with test specimen and heat irradiation, measured at supply air: Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C Climatic testing: Temperature range: +10 °C to +90 °C Humidity range: 10% to 95% relative humidity Dew point range: +5 °C to +89 °C Temperature deviation: ±0.5 K over time Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, Nominal voltage 400 V, without test subjection, irradiation, or additional equipment. Dimensions: Internal dimensions (test room / usable volume): Volume: approx. 5,500 liters (5.5 m³) Approximate internal dimensions: Height: 2,300 mm Width: 1,600 mm Depth: 1,550 mm External dimensions: Height: 2,800 mm Width: 2,250 mm Depth: 5,000 mm Operating data: Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Nominal power: 58.3 kW (incl. 5 sockets) Nominal current: 86.0 A Protection class: IP 54 Technical configuration: Refrigeration unit: Water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Ffedpfsx Eaxbox Abvow Notes: Inspection possible by appointment (46325 Borken) Shipping by freight carrier possible – costs & arrangements on request Scope of delivery: (see photo) (Subject to technical changes and errors in the data provided!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/5.5 – Climate Test Chamber, Water-Cooled The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for performing temperature and humidity testing on multiple test specimens simultaneously. Device Description The climate test chamber enables testing of the function or material properties of test items under temperature and humidity influences. The efficient air circulation with a correspondingly high recirculation volume ensures optimal transfer to the test specimen. The air conditioning system is located at the rear of the inner chamber. The units are housed in a separate frame behind the chamber and are easily accessible. The control system is located in a separate electrical cabinet, with the operating panel integrated into the cabinet door. For chamber dehumidification, the climate chamber is equipped with a self-regenerating compressed air dryer. Additionally, the test chamber can be purged with fresh air via a fan. Technical Specifications: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (measured in supply air, with test load and heat input): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +89°C Ffedpsx D Abpefx Abvsw - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% r.h. over time The technical data refer to an ambient temperature of +25°C, nominal voltage 400 V, without test specimens, without irradiation, and without additional equipment. Dimensions: Internal Dimensions (Test/Usable Chamber): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External Dimensions: - Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operational Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, continuously adjustable capacity via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment (46325 Borken) - Shipping by freight carrier possible – costs & organization upon request - Scope of delivery: (see photo) (Technical specifications and details are subject to change and errors reserved!) For further questions, we are happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Pfeiffer Pfeiffer Vacuum HLT 560 Helium Leak Detector Professional Leak Testing, Sniffer & Vacuum Operation Description: For sale is a professional helium leak detector Pfeiffer Vacuum HLT 560. The device is designed for high-precision leak testing with helium and is typically used in industry, manufacturing, quality assurance, laboratories, as well as technical service. It is suitable for the reliable detection of even the smallest leaks. The HLT 560 operates based on mass spectrometry and can be used in both vacuum and sniffer modes. With the sniffer probe, leaks can be pinpointed precisely, while the vacuum mode enables testing of entire assemblies or systems. The unit features an integrated turbopump and backing pump, making it a complete, mobile test system. Applications (examples): - Leak testing of components and assemblies - Testing of vacuum chambers, pipelines, valves, heat exchangers - Quality control in production - Service and maintenance work on vacuum systems Technical Data: Manufacturer: Pfeiffer Vacuum Model: HLT 560 Test gas: Helium Detection principle: Mass spectrometric helium leak detection Operating modes: Vacuum mode / Sniffer mode Reference leak rate: (7.4 ±15 %) × 10⁻⁷ mbar·l/s Dimensions (approx.): Height: 110 cm Width: 50 cm Depth: 60 cm Interfaces: RS232, RS485, Relay I / II, Gauge connector Fjdpfx Ajyaxu Ssbvjfw Power supply: 230 V / 50 Hz Power consumption: approx. 400 VA Weight: approx. 44 kg Condition: used Scope of delivery: (See picture) (Specifications and details subject to change and errors excepted!) If you have further questions, we will be happy to answer them by phone.

Stanje: dober (rabljeno), - Tester for electrical devices Fsdjb A Ivzopfx Abvsfw - Each equipped with an isolation transformer - Quantity: 7 units available - Price: per piece

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.700 mm, skupna dolžina: 1.765 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 450 mm, pomik po osi Z: 400 mm, priključek za stisnjen zrak: 4 letvica, Wenzel Smart Gear - Gear and 3D Coordinate Measuring Machine The machine is in very good condition and fully functional. It has been regularly maintained and well cared for. Machine Data: • Machine dimensions: L=1765mm, W=1700mm, H=2232mm • Max. rotary table workpiece diameter: 5 to 270mm • Gear measurement accuracy according to VDI/VDE2612/2613 Group II • Max. rotary table load: 20 daN • Travel ranges: X=500mm, Y=450mm, Z=400mm • Scanning probe head: Renishaw SP600M • 7x SP600 probe change trays included • Module measuring range: 0.4 – 10mm • Active air damping of the machine • Year of manufacture: 2008 • Accessories such as drivers, reference sphere, etc. as pictured • 3-jaw chuck, D=80mm with internal and external jaws • 24-inch monitor, mouse, keyboard The following software modules are included: Gear software: • TMain – Program management • TStylus – Probe management • TCali – Probe calibration • TAmo – Analytical determination of axis positions • TGear – Spur gear measurement program • TGear – Addendum and dedendum circle option • TWorm – Worm gear measuring program 3D Software: • Metrosoft CM 3.8 Fsdpfx Absvvudkevsfw

Stanje: zelo dobro (rabljeno), Primus Engineering Type: DST 350 This test facility was designed for conducting IP protection class tests "dust" according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test facility is intended for testing technical components under the influence of dust and vacuum within the limits specified in the technical data. Fsdpfjrt U Nuex Abvjfw Operation / HMI Control panel with display and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical power: Max. 5 KW Supply voltage: 400V/50HZ 3-N/PE (16A EEC socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Test chamber dimensions: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Volume approx. 350 l Weight: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25% r.h. to 75% r.h., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors!) For further questions, we are happy to assist you by phone.