Koncentriranost Test Instrumenta nakup rabljenega (11.216)

Stanje: zelo dobro (rabljeno), Vötsch Type: VBT 03/500 Air-cooled Hedpfx Ajzh D S Redkofk Temperature test chest with spray device Technical Description: Data for temperature tests without water: Temperature range: -30°C to +80°C Temperature deviation in stabilized state according to IEC 60068-3-5, depending on test chamber temperature temporal ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min Cooling: approx. 2 K/min Data for temperature tests with water: Temperature range: +5°C to +80°C Possible water level: -10 mm to 540 mm Water level = -10 mm: Water level is below the insert rack Water level = 0 mm: Water level is at the top edge of the insert rack Standard spray device data: Number of spray nozzles: 6 Spray rate per nozzle: 0.5 l/min Spray device data as per EN 539-2, Method B: Number of spray nozzles: 6 Spray rate per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray rate per additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Pre-tempered water tank data: Volume: approx. 2000 l Pre-tempering temperature range: +5°C to +40°C Temperature change duration: Cooling from +18°C to +5°C: approx. 15 h Heating from +15°C to +40°C: approx. 10 h Setup and operation data: Test chamber: width 1120 mm, depth 840 mm, height 540 mm Housing: width 2700 mm, depth 1300 mm, height 1575 mm Water tank: width 1100 mm, depth 800 mm, height 2200 mm Feed-throughs: 1 feed-through, ø 50 mm, installed on the left Test chamber capacity: approx. 500 liters Refrigerant: R-404a Electrical connection: Rated voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: approx. 26 kW Rated current: approx. 44.0 A (neutral conductor is loaded) Protection: 63 A gG, provided by customer Weight: approx. 890 kg net For your safety as a buyer, the following information: The following procedures are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. New filling with legally compliant refrigerant if necessary 3. Leak tightness test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data are subject to change and errors!) For further questions, please contact us by phone.

Stanje: rabljeno, Zwick / Roell Type: LTM10 Maximum test frequency: 100 Hz, depending on amplitude Dynamic test force in tension/compression: 10 kN Static test force in tension/compression: 7 kN Piston stroke: 60 mm Positioning and repeat accuracy: +/- 2 µm Speed range: 1 mm/min - 1 m/s Test space height without load cell: 1170 mm Weight with linear motor: 1065 kg (without control unit) Maintenance: As per maintenance guidelines, partly by Zwick/Roell Accessories: Screw grips, software (TestXpert research) Hedszh D R Hopfx Adksfk Connection: 400V 50/60 Hz 32A 3Ph/PE Condition: used Scope of delivery: (See picture) (Specifications are subject to change and errors excepted!) We are happy to answer any further questions by phone.

Stanje: zelo dobro (rabljeno), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Test Chamber, Water-Cooled (Explosion-Proof Test Space) NITROGEN INERTIZATION / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test Chamber Designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test Chamber Volume: approx. 600 liters Cooling/Heating Operation: -70°C to +180°C Climatic Operation: +10°C to +95°C Humidity: 10...98% r.h. Temperature Change Rate: Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated Power: 14 kW Rated Current: 25 A Site-side Fuse: 32 A slow-blow Permitted Test Specimen Weight: Total rack load capacity: 80 kg Test chamber floor: 80 kg, Removable shelf: 40 kg Hfodpfx Adezh D Ryokok Weight: 800 kg Refrigerant: R 404A/R 23 (The air conditioning unit's evaporator has been replaced) For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: SWT 200/400 Weiss Spray and Splash Water Test Cabinet Used for testing the ingress of water into enclosures. With a programmable timer, the test cycle can be automated with an adjustable duration from 3 seconds to 30 hours. Hjdezh D Rmspfx Adkjfk According to DIN VDE 0470 T1 / EN 60529 for IPX3 and IPX4 protection rating tests. The integrated recirculation system minimizes water consumption. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable swing angle - Interchangeable oscillating tubes - Swiveling and replaceable nozzle holders - Adjustable and measurable water flow rate - Test duration control Mechanical load data: Maximum test specimen load (evenly distributed): Permissible test specimen weight for carrier (total): 25 kg Spray radius: 200 mm / 400 mm Data for IP protection class tests: Oscillation speed: approx. 60°/s Swing angle IPX3: approx. ± 60° Swing angle IPX4: approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1,900 mm External dimensions (D x W x H): approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H): 400 x 650 x 750 mm Operational data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 1.5 kW Rated current: 6.0 A Weight: 375 kg Condition: used Scope of delivery: (see photo) (Subject to technical modifications and errors. All information is subject to change!) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Refrigerant: Converted to R-452A Controller: - 32-bit controller - LCD operating panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for user-side specimen control Hfedpfx Adezh D E Rjkjk Technical Performance Data Temperature Testing: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5 Heating: 2.5 K/min Cooling: 2.5 K/min Heat dissipation: Approx. 2500 W at +20°C Approx. 2500 W at 0°C Approx. 1800 W at -40°C Technical data based on ambient temperature of +25°C, rated voltage 400V, without specimen, without irradiation, and without additional equipment. Dimensions: Test volume: 600 liters Test chamber dimensions (H x W x D): approx. 850 mm x 850 mm x 830 mm External dimensions (H x W x D): approx. 1900 mm x 1120 mm x 1875 mm Operating Data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerants: R-452A / R23 Weight: 700 kg Important safety information for buyers: The following procedures are performed on all chambers offered by us: 1. Functional check and replacement of necessary components 2. If necessary, recharge with legally compliant refrigerant 3. Leak test with certificate 4. Following successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, The Matest C313N is a laboratory freeze-thaw and climate chamber primarily used for building materials testing – particularly to investigate the behavior of concrete, cement, aggregates, and other materials under varying temperature and humidity conditions. Hfedpfxey R D D Uo Adksk Main areas of application: - Simulation of freeze-thaw cycles (e.g., testing concrete samples for resistance to thermal cycling). - Durability testing of construction materials according to standards (e.g., EN 1367-1). - Accelerated aging and climate tests under various environmental conditions. Features: ✔ Control of two parameters: temperature and humidity. ✔ Temperature range: approx. -30°C to +70°C. ✔ Humidity range: 20–95% (±1% accuracy within the relevant temperature range). ✔ Programmable cycles: up to 50 programs and 100 segments configurable. ✔ 5" color display: real-time clock and optional data logging via PC connection. ✔ Stainless steel interior and exterior housing for long service life. Fields of application: - Freeze-thaw cycle testing on concrete and building materials: demonstrates how the material may crack or be damaged by thermal cycling. - Quality control of construction materials under laboratory conditions. - Environmental and climate testing, where precise control of temperature and humidity is required.

Stanje: rabljeno, Elastomer Test Stand BIA Turnkey Test Systems Hexapod Item No.: PT-065 Designation: Elastomer Test Stand Manufacturer: BIA Turnkey Test Systems Description: Test stand for determining and analyzing mount characteristic curves and values at vehicle operating points mount characteristic curves and values at operating points under specified temperature conditions mount behavior under operational stress (compression set, characteristic curve change) operational noise at operating points on elastomer mounts in the suspension/drivetrain area Test specimens are clamped between a fixed upper plate and a movable lower plate. The movable plate is driven by a hydraulic hexapod. The fixed platform is attached to the test structure via a 6-axis force sensor. A linear actuator allows adjustment of the distance between the two plates to accommodate a wide range of test specimens and fixtures. Degrees of Freedom Amplitude Speeds Frequency Dynamics Xs ±25 mm 1.5 m/s 85 Hz 25 kN Ys ±25 mm 1.3 m/s 85 Hz 25 kN Hfsdpfx Aewhdnhedkjk Zs ±25 mm 0.8 m/s 85 Hz 50 kN Mxs ±15° 340°/s 50 Hz 3.75 kNm Mys ±10° 360°/s 50 Hz 3.75 kNm Mzs ±25° 580°/s 50 Hz 3 kNm Hydraulic Hexapod: The hydraulic hexapod consists of 6 hydrostatically mounted hydraulic cylinders. These have a cross-section of 12.53 cm². Each cylinder is equipped with two parallel servo valves (38 l/min). The six cylinders drive the movable plate via six connecting rods. The connecting rods are equipped with a hydraulic ball joint at their base. The oil pressure for this hydrostatic bearing is supplied directly from the cylinder. Linear Actuator: The distance between the upper and lower plate can be adjusted using a linear actuator. The actuator consists of an electric motor, a gearbox, and a screw nut system. The linear actuator is equipped with an absolute encoder, which is mounted on the input shaft of the gearbox. Hydraulic Actuator: The hydraulic cylinders are fitted with magnetostrictive displacement sensors. Resolution: 0.0015% Linearity:

Stanje: zelo dobro (rabljeno), Kübrich Test Systems 48V Belt Starter Generator - Component Test Stand Details of the Test Stand: (See Image 13) Frame with (1) Mounting fixture for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for system control, handover panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measurement technology box (9) H4: Handover box Intended Use: The test stand is designed to perform tests on belt starter generators during development. Technical Data: Electrical Connection Data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (short-term, less than 1 s) Control voltage: 24 V Mechanical Performance Data according to the load machine’s datasheet Note: There is a 1:2 transmission ratio to the DUT (device under test) shaft. Speeds: Load machine: Setup mode: 0 - 50 rpm Automatic mode: 0 - 10,000 rpm Test object motor: Setup mode: 0 - 100 rpm Automatic mode: 0 - 20,000 rpm Dimensions and Weight Width: 850 mm Height: 1386 mm Length: 1687 mm Hodpfx Adozhkb Sjkjfk Weight: approx. 1.2 t Condition: used Scope of delivery: (See Image) (Technical data subject to change and errors excepted!) Please feel free to contact us by phone for further questions.

Stanje: rabljeno, številka stroja/vozila: 5585HK1182, Ponujamo rabljeni univerzalni preizkuševalni stroj Instron 5585HK1182 proizvajalca Instron. Hfedpfxszgv Ete Adkek Hod: 1182 mm Pritisna sila: 25 t Dimenzije naprave: 1,5 x 1,0 x 2,5 m Teža: 952 kg Krmiljenje: Instron Blue Hill Če imate vprašanja ali potrebujete več informacij, nam pišite.

Leto izdelave: 2011, stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 8802L1280, Ponujamo rabljeni servohidravlični dinamični preizkusni stroj Instron 2527-113 / 104999, model 8802, letnik 2011. Proizvajalec: Instron Model: 2527-113 / 104999 Serijska številka: 8802L1280 Hfsdpfx Ajzgvrtsdkjk Vrsta krmiljenja: Digitalna regulacijska elektronika Tlak: 160 t Izmet: 1120 mm Hod: 0 - 200 mm Število hodov: 0 - 6000 1/min Površina mize: 800 x 560 mm Nastavitev bata: 0 - 1100 mm Teža: 2,5 t Potrebni prostor (ŠxGxV): 1,1 x 1,2 x 3,6 m Če imate vprašanja ali potrebujete več informacij, nam pošljite sporočilo.

Stanje: dober (rabljeno), H. Köhler HK 300 S naprava za preizkušanje kondenzirane vode Proizvajalec: H. Köhler GmbH Tip: HK 300 S Tip stroja: naprava za preizkušanje kondenzirane vode / korozijska preizkusna komora Preizkusni prostor: cca. 300 l Naprodaj je rabljena naprava H. Köhler HK 300 S za preizkušanje kondenzirane vode. Naprava je primerna za preizkuse kondenznega podnebja po DIN 50 017, korozijske teste, teste premazov, teste lakov, preizkušanje materialov ter zagotavljanje kakovosti. Tehnični podatki Prostornina preizkusnega prostora: cca. 300 l Temperaturno območje: sobna temperatura do cca. +55 °C Območje vlažnosti: možno obratovanje pri nasičenosti Ogrevanje preizkusne komore: 1.000 W Električni priklop: 230 V / 50 Hz Priključna moč: 1.000 W Poraba stisnjenega zraka pri prezračevanju: cca. 3 Nm³/h Priključek za stisnjen zrak: 4,5 - 7,0 bar Priključek za demineralizirano vodo: 2,5 - 4,0 bar Dimenzije (Š × G × V): cca. 1.200 × 600 × 1.750 mm Teža: cca. 100 kg Krmiljenje HK PC102 krmiljenje LCD zaslon Programabilni preizkusni procesi Kondenzno podnebje DIN 50 017 Ročni način / testni način Alarmni prikazovalnik Oprema Preizkusna komora iz nerjavečega jekla Hfodpfxjzhadce Adkjk Velika steklena vrata z tesnilom Termometer za preizkusni prostor Manometer Sistem za prezračevanje Priklop za stisnjen zrak Priklop za demineralizirano vodo Odtočni priklop Nerjaveče podnožje s kolesi Dodatna oprema po fotografijah Stanje Rabljena oprema Vizualno stanje po fotografijah. Prikazovalnik prikazuje kondenzno podnebje po DIN 50 017. Dokumentacija ni priložena. Obseg dobave H. Köhler HK 300 S naprava za preizkušanje kondenzirane vode Nerjaveče podnožje Dodatna oprema po fotografijah Obseg dobave kot na slikah. Pridržujemo si pravico do sprememb, napak in vmesne prodaje.

Stanje: dober (rabljeno), H. Köhler HK 300 S Kesternich-korozijski preizkusni aparat Proizvajalec: H. Köhler GmbH Tip: HK 300 S Leto izdelave: neznano Tip stroja: Kesternich-korozijski preizkusni aparat / SO₂-korozijska preizkusna komora Volumen preizkusnega prostora: pribl. 300 l Naprodaj je rabljeni H. Köhler HK 300 S korozijski preizkusni aparat za izvajanje Kesternich oziroma SO₂-korozijskih preizkusov v skladu z DIN 50017 / DIN EN ISO 6988. Naprava je primerna za korozijske preizkuse na kovinah, premazih, lakih in sestavnih delih v laboratoriju, raziskavah, razvoju ter v kakovostni kontroli. Tehnični podatki Volumen preizkusnega prostora: pribl. 300 l Temperaturno območje: sobna temperatura do pribl. +55 °C Hfsdpfezg U Tiex Adkek Obratovanje vlažnosti: možen režim nasičenja Ogrevanje preizkusnega prostora: 1.000 W Priključna moč: pribl. 1.100 W Električni priključek: 230 V / 50 Hz Poraba stisnjenega zraka: pribl. 3 Nm³/h Priključek za stisnjen zrak: 4,5 – 7,0 bar Priključek za demineralizirano vodo: 2,5 – 4,0 bar Tlak pršenja: 0,7 – 1,5 bar Dimenzije (Š × G × V): pribl. 1.200 × 600 × 1.750 mm Teža: pribl. 100 kg Krmiljenje HK PC102 mikroprocesorsko krmiljenje LCD zaslon Programabilni testni postopki Regulacija temperature Oprema Preizkusni prostor iz nerjavečega jekla Veliko opazovalno okno Naprava za doziranje plina Prezračevalni sistem Regulacija temperature Termometer za preizkusni prostor Manometer Priključek za stisnjen zrak Priključek za demineralizirano vodo Priključek za odvod zraka Navodila za uporabo priložena Dokumentacija za vzdrževanje priložena Izjava o skladnosti CE priložena Področja uporabe Kesternich testiranje SO₂-korozijsko testiranje Korozijska testiranja Testiranje premazov Testiranje lakov Materialni testi Avtomobilska industrija Kontrola kakovosti Raziskave in razvoj Stanje Rabljeno / Used Vizualno stanje skladno s slikami. Obseg dobave H. Köhler HK 300 S korozijski preizkusni aparat Navodila za uporabo Izjava o skladnosti CE Vzdrževalna dokumentacija Dokumentacija Pribor v skladu s prikazanimi slikami Obseg dobave kot na slikah. Pridržujemo si pravico do sprememb, napak in vmesne prodaje.

Stanje: rabljeno, Leto izdelave: 2021, Sistem Canon CX-1, vključno z računalnikom, zapakiran v originalnih embalažah proizvajalca. Serijska številka: 210141 – Leto nakupa: 2022 Hjdpfx Adjzmxqrekefk Sistem je bil kupljen za kratkotrajno klinično študijo in je bil zelo malo uporabljen; v odličnem je stanju.

Stanje: rabljeno, CTS Model: TS -70/600-13 Water-cooled Temperature Test Chamber Series: TS -70/600-13 Control: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for external test specimen control Test chamber volume: 600 liters Internal chamber dimensions: Height approx. 730 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 2250 mm, Width approx. 1300 mm, Depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from +120°C to -40°C Temperature deviation: ± 0.1K over time, ± 0.5 K spatially Electrical connection: 400V / 3-phase / N / PE Rated power: approx. 27.8 kW Rated current: approx. 44.1 A Hsdpfx Adszg Tzfoksfk Compressors: 4TC-8.2Y / 4PC-10.2Y Refrigerants: R-404A / R-23 Weight: 1350 kg For your security as a buyer, the following information: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we would be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Temperature Test Chamber T-55/1000 Li, Water-Cooled Temperature Range: -50°C to +100°C Rated Voltage: 400V 3/N 50Hz Rated Power: 9.5 kW Rated Current: 18 A Compressor: TFH2511Z / TFH2511Z, Refrigerants R404A/R23 The type designation of the CTS chamber series is structured as follows: e.g., Type T -55/1000/Li 1) T means: Temperature 2) -55 means: lower temperature limit -55°C 3) 1000 means: 1000 liters test chamber volume 4) Li means: special equipment for lithium-ion battery testing Control: 32-bit controller LCD control panel Digital display of setpoint and actual values Numerical input of setpoints Error messages in clear text Ethernet interface RS 232 interface Free switching channels for external specimen control Test Chamber Lighting: Energy-efficient, high-intensity LED light strip mounted on the door Rack: Stainless steel, load surface 970 x 980 mm Maximum load per rack: 35 kg Total load with maximum rack assembly: 100 kg 1a Feedthrough NW50 1b Feedthrough 2x NW125 1c Feedthrough 2x Rp 3 1/4° for Minimax Technical Performance Data: Temperature Tests: Temperature range -50°C to +100°C Temperature deviation: ≤ ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Thermal Compensation: Approx. 4000 W at +20°C Approx. 2200 W at -40°C The technical data refer to an ambient temperature of +25°C, nominal voltage 400V, without test specimen, without thermal compensation, and without additional equipment. Options may affect performance data. Dimensions: Test volume: 1000 liters Test chamber dimensions: Height approx. 1000 mm, Width approx. 860 mm, Depth approx. 1100 mm External dimensions: Height approx. 1950 mm, Width approx. 1270 mm, Depth approx. 1900 mm Operating Data: Electrical connection: 400 V +6/-10%, 3/N, 50 Hz Rated current: 18 A Hodpjzg Ty Uofx Adkjfk Rated power: 9.5 kW Protection class: IP 54 Sound pressure level: < 58 dB(A) (measured according to DIN EN ISO 3744 at 1 m front distance) Weight: approx. 1000 kg Heat dissipation to ambient: 10.4 kW Refrigeration Unit: Water-cooled, low-noise, fully hermetic overall stepless power adjustment via electronic monitoring and control system environmentally friendly refrigerants R404A/R23 For your safety as a buyer—the following will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new refill with legally compliant refrigerant 3. Leak testing with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical details are subject to change and errors!) We are happy to answer further questions by telephone.

Stanje: zelo dobro (rabljeno), CTS Type: T-70/600/S Water-cooled Temperature Test Chamber Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numerical input of setpoints - Plain text error messages - RS 232 interface - Free switching channels for test specimen control by customer Technical Specifications Temperature Tests: Temperature range: -70 °C to +180 °C Temperature deviation: ±0.1 to ±0.3 K over time Temperature change rate according to IEC 60068-3-5: Heating: 2.5 K/min Cooling: 2.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2500 W at 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test specimen, without irradiation and without extra equipment. Dimensions: Test volume: 600 liters Test chamber interior (HxWxD): approx. 850 mm × 850 mm × 830 mm Exterior dimensions (HxWxD): approx. 1900 mm × 1120 mm × 1875 mm Hedpfjzg Ty Iex Adkefk Operating Data: Power supply: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 8.8 kW Rated current: 14.8 A Protection class: IP 22 Weight: approx. 700 kg Refrigerant: R404A / R23 Weight: 600 kg Important information for you as the buyer! The following steps are carried out on our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; all data provided without guarantee!) Please feel free to contact us by phone for any further questions.

Stanje: rabljeno, Vötsch Model: VCS 7034-5 Climate Test Chamber, Water-Cooled Test Chamber Volume: 335 liters Performance Data for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±2.0 K Temperature Gradient: 1 to 4 K Rate of Change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature Calibration Values: +23°C and +80°C Performance Data for Climate Testing: Temperature Range: +10 to +95°C Hsdpszg Tx Rsfx Adkofk Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Deviation: ±0.5 to ±1.0 K Temperature Gradient: 1 to 2 K Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Dew Point Range: -3 to +94°C Heat Compensation: 400 W Climate Calibration Values: +23°C / 50% RH and +95°C / 50% RH Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10% 50 Hz Nominal Power: 10 kW Nominal Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerant: R-404A / R-23 Important Safety Information for Buyers: The following procedures are performed on our offered chambers prior to delivery: 1. Functional inspection and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data is subject to change and errors may occur!) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Vötsch Model: VCS 7034-5 Climate Test Chamber, Water-cooled Vötsch VCS 7034-5 Test chamber volume: 335 liters Performance Data for Temperature Tests Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 K Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration points: +23°C and +80°C Performance Data for Climate Tests Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration points: +23°C / 50% RH and +95°C / 50% RH Hfsdpozg Twgofx Adksk Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and correction!) If you have further questions, please contact us by phone.

Stanje: dober (rabljeno), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber internal dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 litres Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Hfjdszg Tp Nspfx Adkek Rated power: 10 kW Rated current: 21 A Sound pressure level at 1 m distance (free-field measurement):

Stanje: dober (rabljeno), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber internal dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 litres Hfedpfxszg Tp Ao Adksk Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW Rated current: 21 A Sound pressure level at 1 m distance (free-field measurement):

Stanje: dober (rabljeno), Heraeus Vötsch Model: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber internal dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 litres Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Hfjdpfx Adezg Tpijkjk Rated power: 10 kW Rated current: 21 A Sound pressure level at 1 m distance (free-field measurement):

Stanje: dober (rabljeno), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion Test Chamber for Salt Spray Testing Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (WxDxH1/H2): 1400x800x800/1020 mm Door opening dimensions (WxH): 1300x680 mm External housing dimensions (WxDxH): 2162 x 995 x 2080 mm Operating temperature range: 5°C above ambient up to +80°C Heavy-duty configuration for loads up to 350 kg Process control: Beckhoff PLC, color touch screen display, 50 program memory slots, 50 segment memory slots, ramps: humidity/temperature control across the entire working range, Ethernet interface Electrical connection: 400 V, 50 Hz, 5700 W Mains water: min. 2.5 bar, 3/4" tap connection, external thread for connecting an ion exchange cartridge Compressed air: 7-8 bar Wastewater: siphon / 30 mm ID hose nozzle Exhaust: pipe end OD 75 mm Operating modes: Salt spray Condensation (CWC) Hsdezg Tl Ropfx Adksfk Ambient air ventilation Heated air Controlled humidity

Stanje: zelo dobro (rabljeno), Vötsch Model: VTS³ 7027-25 Heraeus Vötsch Temperature Test Chamber, Water-cooled Technical Specifications: - With a temperature change rate of 25 K/min - Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 615 mm - External dimensions: Height 1775 mm, Width 780 mm, Depth 1895 mm - Temperature range: -72°C to +180°C - Temporal temperature deviation: ±0.1 to ±0.5 - Spatial temperature uniformity: ±0.5 to ±2.0 - Cooling rate: 25 K/min - Heating rate: 25 K/min - Heat compensation at -20°C: 8000 W - Heat compensation at +20°C: 8000 W Hedszg Eygjpfx Adkofk - Test volume: 270 liters - 2x side feedthroughs ∅ 125 mm - 1x side feedthrough ∅ 50 mm - Chamber is water-cooled Test chamber lighting: - LED strip 24 V, 6.8 W / 2x halogen bulb 24 V, 50 W Electrical connection: - Rated voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 26 kW - Rated current: 44 A - Refrigerants: R-452A and R-23 - Weight: approx. 980 kg Important safety information for you as the buyer! The following points are carried out in advance on all chambers we offer: 1. Functional test and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers undergo a documented trial run Condition: used Scope of delivery: (See image) (Subject to changes and errors in technical data and information!) We will gladly answer any further questions by phone.

Stanje: dober (rabljeno), Siga Type: GS-517-400 External dimensions (L x W x H): 4960 x 2500 x 2400 mm The complete system is calibrated according to DAkkS and is therefore approved for inspections relevant to certification. Butane charging rate — Infinitely adjustable from 5 g/h to 77 g/h Fuel charging rate — Infinitely adjustable from 5 g/h to 100 g/h Fuel temperature control — Infinitely adjustable from 20°C to 50°C Hjdpfxszg Ex Ns Adkofk Adjustable gasoline quantity — From 0 l to 8 l Selectable breakthrough criterion — From 1 g to 10 g Purge air stream temperature — Infinitely adjustable from 25°C to 30°C Precision scales for test specimen and reference carbon canister — Measuring range up to 6 kg, 0.1 g resolution Purge vacuum — Infinitely adjustable from 0 hPa to 30 hPa Purge air stream — Infinitely adjustable from 1 l/min to 60 l/min Humidity of purge air stream — Infinitely adjustable from 10% rH to 85% rH Number of cycles from 1 to 999 (loading/purging) Condition: used Sale from site! Scope of delivery: (see picture) (Subject to change and errors in the technical data and specifications!) If you have any further questions, feel free to contact us by phone.

Leto izdelave: 2019, stanje: zelo dobro (rabljeno), Weiss Technik SaltEvent SC 1000 komora za preizkus solne megle Proizvajalec: Weiss Technik GmbH Tip: SaltEvent SC 1000 Tip stroja: komora za preizkus solne megle / naprava za korozijske preizkuse Velikost: 1000 litrov Na prodaj je rabljena Weiss Technik SaltEvent SC 1000 komora za preizkus solne megle. Naprava je primerna za testiranje z razprševanjem slane megle, korozijske preizkuse, teste s kondenzirano vodo, preizkuse materialov, preizkuse površin ter uporabo v zagotavljanju kakovosti, raziskavah in razvoju. Tehnični podatki: Nazivna napetost: 1/N/PE AC 230 V ±10 % / 50 Hz Nazivna moč: 2,6 kW Nazivni tok: 11,3 A Fuzibilka na strani kupca: 16 A počasna Teža: pribl. 370 kg Skupne mere po risbi: pribl. 2910 × 900 × 960 mm Testni prostor / obremenitev: Maks. dovoljena obremenitev preizkusnega prostora: 150 kg Dovoljeno na rešetki dna: 150 kg Nosilnost vložnih palic: 8 kg na palico Polica na pokrovu stroja: 5 kg Temperaturni in preizkusni podatki: Temperaturno območje za preizkus solne megle: temperatura okolice +5 K do +50 °C Temperaturno območje za kondenzacijski test: temperatura okolice +5 K do +42 °C Temperatura vlažilnika stisnjenega zraka: temperatura okolice +5 K do +70 °C Časovna temperaturna konstantnost: ±1 K Poraba slanice pri preizkusu solne megle: pribl. 0,5 do 1,5 l/h Oprema: Hfsdpfxjzg Er Ae Adksk S!MPAC krmiljenje WEBSeason / barvni upravljalni modul Upravljalna plošča na dotik Pokrov preizkusnega prostora Vgrajeni rezervoar za vodo Stikalna omara Rešetka dna preizkusnega prostora Vlažilnik stisnjenega zraka Zaklepanje pokrova Nadzor temperature Vmesnik Dokumentacija po slikah Priključki: Električni priključek 230 V / 50 Hz Priključek za stisnjen zrak Priključek za demineralizirano vodo Priključek za izhod zraka Odtok za vodo / kondenzat Področja uporabe: Preizkus solne megle Korozijski preizkusi Kondenzacijski test Preizkus materialov Preizkus površin Preizkus premazov Avtomobilska industrija Zagotavljanje kakovosti Raziskave in razvoj Stanje: Rabljeno Funkcionalni preizkus pred dostavo. Vizualno stanje po slikah. Obseg dobave: Weiss Technik SaltEvent SC 1000 komora za preizkus solne megle Vgrajen rezervoar za vodo Dokumentacija po slikah Dodatna oprema po slikah Obseg dobave kot prikazano. Pridržujemo si pravico do sprememb, napak in predhodne prodaje.