Koncentriranost Test Instrumenta nakup rabljenega (12.591)

Stanje: zelo dobro (rabljeno), CTS CTS Climate Test Chamber Type: C -40/600 Air-cooled (converted to R-452a) Test chamber volume: 600 liters Temperature tests: Temperature range: -40°C to +180°C Temperature deviation: ±0.1 K / ±0.3 K over time (when equilibrated) Average rate of temperature change, without specimen and without heat input, Heating: 2.5 K/min Cooling: 3.0 K/min Maximum heat input: 2500 W at +20°C Climate tests: Climatic range / Technical data Temperature range: +10°C to +95°C Humidity range: 10% r.h. to 98% r.h. Dew point range I: +7°C to +94°C Dew point range II: –10°C to +7°C Stability values (over time): Humidity stability I: ±0.5% r.h. to ±1.5% r.h. Humidity stability II: ±1% r.h. to ±3% r.h. Temperature stability: ±0.1 K to ±0.3 K Test chamber dimensions (H x W x D), approx.: 850 mm x 850 mm x 830 mm External dimensions (H x W x D), approx.: 1900 mm x 1115 mm x 1850 mm Refrigerant: R-452A Electrical connection: 400V 3/N 50Hz Connected load: 8.2 kW, Rated current: 11.9 A Weight: 550 kg Important information for your security as a buyer! The following steps are carried out on our chambers prior to delivery: 1. Functional inspection and exchange of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Hedpew U Awmjfx Af Tofb Condition: used Scope of delivery: (see photo) (Specifications and data subject to change and error!) If you have any further questions, we will be happy to answer them by phone.

Leto izdelave: 1997, Stanje: dober (rabljeno), Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Model: VTR 7033/S Item No.: 60885637 Temperature Chamber Temperature Range: -70°C to +180°C Mains Voltage: 400V Rated Current: 24A Hfedpjuuiv Iofx Af Tjb Rated Power: 9.5 kW Refrigerant (Climate Chamber): R 404 A Refrigerant (Deep Freezing): R 23 Year of Manufacture: 1997 TK 08 You can find more articles – both new and used – in our shop! International shipping costs upon request!

Stanje: zelo dobro (rabljeno), Vötsch Type: VT³ 4150 Vötsch Temperature Test Chamber Air-cooled Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Rate of change: Cooling approx. 3.5 K/min Rate of change: Heating approx. 4 K/min Temperature test Temperature range: -40°C to +180°C Exhibition plan External dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test chamber dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A For your safety as a buyer, please note the following information! The following work is performed on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate Hodpfsu Nh Rbjx Af Tjfb 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and information excepted!) Further questions can be answered by phone.

Stanje: zelo dobro (rabljeno), CTS Type: TW-60/9 Water-Cooled Temperature Test Chamber CTS Temperature Test Chamber Type TW-60/9 T = Temperature W = Walk-in -60 = Minimum temperature -60°C 9 = 9 m³ test chamber volume Technical Specification: Refrigeration Unit: Water-cooled, low noise, semi-hermetic, stepless power adjustment by electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A Control System: 32-bit controller LCD control panel Digital display of setpoint and actual values Numeric input of setpoints Error messages in plain text RS 232 interface Free switching channels for customer-side test specimen control Technical Performance Data: Temperature testing: Temperature range: -60°C to +100°C Temperature deviation: ± 0.1 to 0.5 K over time Temperature change rate, average with test specimen and radiant heat measured in supply air. Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test item: 420 kg solar cell modules, 100% with test Continuous radiant heat: 3000 W Technical data based on ambient temperature +25°C, nominal voltage 400 V, without test load, without radiation and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating Data: Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Nominal power: 48.9 kW Nominal current: 74.9 A Protection class: IP54 Cooling water connections: coolant supply/return R1 ¼", internal thread Condensate drain, non-pressurized, R1", internal thread Weight: approx. 5609 kg Condition: used Hfjdpfxsvb E Uqj Af Tsb Scope of delivery: (see photo) (Specifications subject to change and error!) For further questions, please call us.

Stanje: zelo dobro (rabljeno), CTS Type: TW -60/9 Temperature Test Chamber, Water-Cooled Hedevb Hanepfx Af Tefb CTS Temperature Test Chamber Type TW -60/9 T stands for: Temperature W stands for: Walk in -60 stands for: minimum temperature -60°C 9 stands for: 9 m³ test chamber volume Technical specifications: Cooling unit: Water-cooled, low-noise, semi-hermetic, continuously variable power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R23 / R404A Control system: 32-bit controller LCD control panel Digital display of setpoints and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for user-side specimen activation Technical performance data: Temperature testing: Temperature range: -60 °C to +100 °C Temperature deviation: ± 0.1 to 0.5 K over time Rate of temperature change (average), measured with test load and with radiant heat input, measured at supply air: Heating: 1.6 K/min from -40°C to +85°C Cooling: 1.6 K/min from +85°C to -40°C Test load: 420 kg solar module panels, 100% following Radiant heat input: 3000 watts continuous The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test load, without radiant input, and without additional equipment. Dimensions: Test volume: 9 m³ External dimensions: width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: width approx. 1600 mm, depth 2400 mm, height 2200 mm Operating data: Electrical connection: 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power: 48.9 kW Rated current: 74.9 A Protection class: IP 54 Cooling water connections: supply/return R1 ¼", female thread Condensate drain, gravity R1", female thread Weight: approx. 5609 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we will be happy to answer them by phone.

Stanje: rabljeno, CTS Model: TS -70/600-13 Water-cooled Temperature Test Chamber Series: TS -70/600-13 Control: - 32-bit controller Hfodpfxjvcyawo Af Tob - LCD control panel - Digital display of set and actual values - Numerical input of set values - Error messages in plain text - RS 232 interface - Free switching channels for external test specimen control Test chamber volume: 600 liters Internal chamber dimensions: Height approx. 730 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 2250 mm, Width approx. 1300 mm, Depth approx. 2475 mm Temperature range: -70 to +180°C Heating rate: 13 K/min from -40°C to +120°C Cooling rate: 13 K/min from +120°C to -40°C Temperature deviation: ± 0.1K over time, ± 0.5 K spatially Electrical connection: 400V / 3-phase / N / PE Rated power: approx. 27.8 kW Rated current: approx. 44.1 A Compressors: 4TC-8.2Y / 4PC-10.2Y Refrigerants: R-404A / R-23 Weight: 1350 kg For your security as a buyer, the following information: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and information!) If you have further questions, we would be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Climate Test Chamber T-70/600 Water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control system: - Microprocessor-controlled regulation and monitoring system - Simple, user-friendly terminal integrated into the door - Digital display for set and actual temperature values - Easy adjustment via +/- buttons - Digital input for temperature in °C - PLC-compatible - Up to 100 test programs possible - RS 232 interface - 2 free switching channels for customer-side test item control Shelving: Stainless steel, support surface 820 x 710 mm Load per shelf max. 35 kg Total max load for full shelf setup: 100 kg Refrigeration unit: Water-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R404A/R23 Temperature testing: Temperature range: -70°C to +180°C Temperature deviation: ±0.1 to 10.3 K over time Hfsdpfx Asvaxq Nsf Tsb Temperature change rate measured in center of test chamber according to DIN 50 011, Part 12 Heating: 2.5 K/min Cooling: 2 K/min Thermal radiation max. 1500 W at +20°C Technical data refers to an ambient temperature of +25°C, rated voltage 400 V, without test specimen, without irradiation, and without auxiliary equipment. Dimensions: Test volume: 600 liters Test chamber dimensions: 850 x 830 x 850 mm (W x D x H) External dimensions: 1050 x 1850 x 1900 mm (W x D x H) Operating data: Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Protection class: IP 22 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level: < 62 dB(A) Weight: approx. 400 kg For your peace of mind as a buyer, please note the following: The following points are carried out on all our offered chambers beforehand: 1. Functional check and replacement of necessary components 2. If required, new filling with legally approved refrigerant 3. Leak test with certificate 4. After successful testing, chambers undergo a documented trial run. Condition: used Scope of delivery: (See photo) (Changes and errors in technical data and information subject to confirmation!) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Type: TS -70/1000-10 For sale: CTS temperature test chamber Model: TS -70/1000-10 Hjdpfjxdi Ezjx Af Tsfb Cooling: water-cooled refrigeration unit, Compressor has been replaced! Equipment: • Multi-touch control system • USB and Ethernet interfaces • Cable feedthroughs for test cables – 4 × Ø 125 mm • Safety temperature limiter Fields of application: • Environmental and endurance testing • Temperature cycling tests (stress screening) • Quality assurance and R&D • Electronics, automotive, material testing Test chamber volume: 1000 liters Test chamber dimensions: • Height: approx. 1000 mm • Width: approx. 860 mm • Depth: approx. 1100 mm External dimensions: • Height: approx. 1950 mm • Width: approx. 1270 mm • Depth: approx. 1900 mm Temperature range: -70 to +180°C Temperature deviation: ± 0.3K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) For any further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This unit is used for testing water ingress into enclosures. When paired with a timer, the test cycle can be automated for adjustable durations ranging from 3 seconds up to 30 hours. Compliant with DIN VDE 0470 T1 and EN 60529 for insulation class testing according to protection ratings IPX3 and IPX4. The integrated recirculation system minimizes water consumption. Features: - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and replaceable nozzle holder - Adjustable and monitored water flow volume - Programmable test duration control Mechanical Load Data: - Max test specimen load (evenly distributed): - Permitted test load on specimen carrier (total): 25 kg - Spray radius: 200 mm / 400 mm IP Protection Class Test Data: - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ±60° - Oscillation angle IPX4: approx. ±180° -10° Dimensions: - External dimensions incl. control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal chamber dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see picture) (Specifications subject to modifications and errors!) For further questions, please feel free to contact us by phone. Hfodpoxg Hrkjfx Af Teb

Stanje: rabljeno, Huda Technology HUD-G809 Fall Shock Test System Systém je vhodný také pro baterie Maximální nosnost: 100 kg Velikost stolu: 500 mm x 600 mm Rozsah maximálního zrychlení při nárazu: - Půlsinusová vlna: 150 - 6000 m/s² Doba trvání pulzu: - Půlsinusová vlna: 0,5 - 30 ms Pokud je doba trvání pulzu menší nebo rovna 3 ms, tolerance špičkového zrychlení je ±20 %; tolerance doby trvání pulzu je ±15 %. Pokud je doba pulzu větší než 3 ms, musí být tolerance tvaru vlny v rozsahu stanoveném normou. Tolerance rychlosti: ±15 % Hydraulická brzda zabraňuje sekundárnímu nárazu Hodpfx Afoxmiilo Tefb Celkové rozměry stolu: 1000 x 750 x 2450 mm Hmotnost: 3600 kg Příkon: 5,5 kVA 380 V ±10 % AC 50 Hz Stav: použitý (Změny a omyly v technických údajích jsou vyhrazeny!) Další dotazy Vám rádi zodpovíme telefonicky.

Stanje: zelo dobro (rabljeno), RS Simulators Model: ST2K320/45 K Water-cooled shock test chamber Temperatures in upper test chamber: Temperature range: +40 °C to +180 °C Temporal deviation: ±0.8 K according to DIN 50011 with empty chamber Temperatures in lower test chamber: Temperature range: -40 °C to +100 °C Temporal deviation: ±0.8 K according to DIN 50011 with empty chamber Hsdpfx Astrf Uljf Tjfb Humidity in upper test chamber: Climatic temperature range: +40 °C to +90 °C Humidity range: 20% to 98% (±2 to 5%) relative humidity Humidity: 25% to 75% relative humidity Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25% to 75% relative humidity Dimensions: Width 900 mm, Height 2000 mm, Depth 2300 mm Test chamber dimensions: Width 470 mm, Depth 700 mm, Height 440 mm Electrical supply: Total power: 13 KVA Current draw: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber weight: approx. 950 kg Important information for you as the buyer for your safety! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Changes and errors in technical data and specifications excepted!) We will be happy to answer further questions by phone.

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), CTS Model: T-30/950 Ex/I CTS Temperature Test Chamber, Explosion-Proof Control: 32-bit controller LCD control panel Digital display of set and actual values Numeric entry of set values Clear-text error messages RS 232 interface Free switching channels for customer-side test specimen control Temperature tests: Temperature range: -30°C to +80°C Temperature deviation: ±0.3 K over time Hjdpfxsihb Ame Af Tsfb Temperature change rate: Heating: 2 K/min Cooling: 1.5 K/min down to -10°C Heat radiation: approx. 1000 W at +20°C, approx. 200 W at -25°C Nitrogen inertization with residual oxygen monitoring: With nitrogen inertization, the test chamber is initially purged with a large amount of N₂ until the oxygen content drops below 3%. Then it switches to a base flow (approx. 10% of the full purging amount). The baseline nitrogen flow is measured with a flow meter, displayed, and monitored via a limit switch. O₂ monitoring continuously extracts gas from the test chamber via a flame arrestor and channels it over an O₂ sensor to monitor the residual oxygen content in the extracted air. After measurement, the gas passes through a second flame arrestor back into the test chamber. The exhaust pump is monitored by a flow meter. Further details can be found in the user manual by Dräger in the appendix. Note: The gas system is currently out of service! The technical data refer to an ambient temperature of +25°C, rated voltage of 400V, without test material, without radiation, and without additional equipment. Dimensions: Test chamber volume: 950 liters Test chamber dimensions: Height approx. 700 mm / Width approx. 900 mm / Depth approx. 1500 mm External dimensions: Height approx. 2400 mm / Width approx. 1270 mm / Depth approx. 3125 mm Operating data: Electrical connection: 400V +6/-10%, 3/N, 50 Hz Nominal power: 21.6 kW Nominal current: 36.5 A Protection rating: IP 54 Condensate drain: non-pressurized R 1/2" female thread Sound pressure level:

Stanje: zelo dobro (rabljeno), Weiss Model: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Unit: Touchpanel All control and operating commands can be activated on the "Touchpanel" control unit by simply touching the function icons. Adjustable Feet To compensate for floor unevenness and to ensure sufficient ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is fitted with feedthroughs on the right and left sides. These allow measuring cables and test fixtures to be routed into the test chamber. Feedthroughs installed as standard: R1: Nominal Width 125 mm L1: Nominal Width 85 mm Volume: 335 liters Test Chamber Internal Dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External Dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for Temperature Tests: Minimum Temperature: –72°C Maximum Temperature: +180°C Temperature Deviation, over time: ± 0.1 to ± 0.5 K Temperature Uniformity, spatial: ± 0.5 to ± 1.5 K Temperature Change Rate, Cooling: 3 K/min Temperature Change Rate, Heating: 3 K/min Data for Climate Tests: Temperature Range: +10°C to +95°C Dew Point Range: -3°C to +94°C Humidity Range: 10 to 98% r.h. Temperature Deviation, over time: ± 0.1 to ± 0.3 K Temperature Uniformity, spatial: ± 0.5 to ± 1 K Humidity Deviation, over time: ± 1 to ± 3% r.h. Operating Data: Test Chamber Lighting: Halogen bulbs 2 x 24V, 50W Rated Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Current: 16 A Rated Power: 4.9 kW Circuit Breaker (on-site): 16 A slow-blow Refrigerant: R-452A/R23 Hfjdpsv Sr Hzsfx Af Tjb Weight: approx. 585 kg For your security as the buyer, please note the following information! The following items are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and information reserved!) Feel free to contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), Here we offer you a DÜRR testing station for adhesive applicator heads. DÜRR testing station for adhesive applicator heads including (5 robot-guided adhesive applicator heads) DÜRR testing station (custom-made by Dürr) for the automotive industry Weight: 1200 kg Type: DÜRR testing station for adhesive applicator heads Condition: used Hedpfx Afomhftdo Tefb Scope of delivery: (see picture) (Specifications and details may be subject to change and errors excepted!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Vötsch shock test chamber. Water-cooled thermal shock test cabinet Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C Temporal temperature deviation at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate Heating: 11 K/min Cold chamber: The temperature range of the cold chamber is from -80°C to +70°C Temporal temperature deviation at the center of the usable space: ±1 K Spatial temperature deviation: ±2 K Temperature change rate Heating: 2 K/min Cooling: 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Test chamber internal dimensions: width 470 mm x depth 650 mm x height 410 mm External dimensions: width 930 mm x depth 2115 mm x height 1970 mm Port diameter: 67 mm Rated power: 10 kW Rated current: 25 A Voltage: 3/N/PE AC 400V ±10% 50Hz Refrigerants: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! We perform the following steps in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate Hfodpfjn Arc Ajx Af Tob 4. After successful inspection, the chambers undergo a test run monitored with calibrated instruments. Model: VT 7012 S2 Condition: used Scope of delivery: (See image) (Changes and errors in technical data and specifications excepted!) If you have further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Here we offer a Weiss climate test chamber. Water-cooled Test chamber lighting: halogen bulb 24V, 50W Data for temperature tests: Temperature range: -40°C to +180°C Temporal temperature deviation at chamber center: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C: 8,000 W Heat compensation at -20°C: 3,000 W Data for climate tests Temperature range: +10°C to +95°C Humidity range: 10 to 98% RH Hfedeq Dpzyopfx Af Tsb Temporal temperature deviation at chamber center: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity fluctuation at chamber center: ± 1 to ± 3% RH Test chamber dimensions: Height 950 mm, Width 760 mm, Depth 650 mm External dimensions: Height 2025 mm, Width 1090 mm, Depth 2480 mm Rated voltage: 3/N/PE AC 400 V ±10% 50 Hz Rated current: 24 A Rated power: 16.0 kW Refrigerant: R452A Weight: approx. 900 kg Type: WK-480/40/10 Important information for your security as buyer! The following points are completed on all chambers we offer, before delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to technical changes and errors in specifications!) We are happy to answer further questions by phone.

Stanje: zelo dobro (rabljeno), Vötsch Model: VT³ 4150/S Vötsch Temperature Test Chamber Water-cooled Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 11.5 kW Hfedpfxoinuhge Af Tjb Rated current: 22.0 A Change rate: cooling approx. 3.5 K/min Change rate: heating approx. 4 K/min Temperature testing Temperature range: -40°C to +180°C Installation plan External dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test chamber dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A For your safety as a buyer, please note the following information! The following procedures are carried out on our chambers prior to sale: 1. Function check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change and correction!) If you have any further questions, we will be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), RMS vibration exciter with power amplifier and cooling fan Here we offer you an RMS vibration exciter with power amplifier. Vibration exciter SW 1507 Max force: 2158 N Hfjdpfegkaibsx Af Teb Max velocity: 1.3 m/s Power amplifier TGA 1500 3 x 380V / 50Hz / 35A / 8 kVA Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors. All specifications are subject to change!) If you have further questions, we are happy to answer them by phone. Written orders can be placed by email or fax.

Stanje: zelo dobro (rabljeno), RMS Vibrations Vibration Test System We are offering you an RMS Electrodynamic Vibration Test System. Hjdpfshyly Rex Af Tsfb RMS Vibrations Vibration Test System Vibration Exciter SW 3006 Power Amplifier TGA 1500 Technical Specifications: Sine: 3.7 kN Random: 3.7 kN Shock: 3.7 kN Displacement pk-pk: 26 mm Velocity: 0.9 m/s Acceleration: 80 g Cooling: air-cooled Condition: Used Untested! Testing was not possible Scope of delivery: (See picture) (Specifications and information are subject to change and corrections!) If you have any further questions, please feel free to contact us by phone. Written orders can be placed by email or fax.

Stanje: zelo dobro (rabljeno), KSE Leak Test Stand We are offering a KSE Leak Test Stand. Test stand for automotive applications Testing of electric drives Insulation/leakage testing of electric motors Supply voltage: 400 VAC Hsdpfoiu H Hcox Af Tsfb Control voltage: 24 VDC Connected load: 0.75 kW Type: KSE I/SB-3 Condition: used Scope of delivery: (see image) (Subject to technical modifications and errors in the data provided!) Further questions can gladly be answered for you by phone.

Stanje: dober (rabljeno), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion Test Chamber for Salt Spray Testing Hjdpfx Aet Igc Ssf Tsfb Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (WxDxH1/H2): 1400x800x800/1020 mm Door opening dimensions (WxH): 1300x680 mm External housing dimensions (WxDxH): 2162 x 995 x 2080 mm Operating temperature range: 5°C above ambient up to +80°C Heavy-duty configuration for loads up to 350 kg Process control: Beckhoff PLC, color touch screen display, 50 program memory slots, 50 segment memory slots, ramps: humidity/temperature control across the entire working range, Ethernet interface Electrical connection: 400 V, 50 Hz, 5700 W Mains water: min. 2.5 bar, 3/4" tap connection, external thread for connecting an ion exchange cartridge Compressed air: 7-8 bar Wastewater: siphon / 30 mm ID hose nozzle Exhaust: pipe end OD 75 mm Operating modes: Salt spray Condensation (CWC) Ambient air ventilation Heated air Controlled humidity

Stanje: zelo dobro (rabljeno), Vötsch Type: VT³ 4150 Vötsch Temperature Test Chamber, Air-cooled Temperature Testing Temperature range: -40°C to +180°C Rate of change: Cooling approx. 2.5 K/min. Hjdpfx Afow Ehuts Tsfb Rate of change: Heating approx. 3.5 K/min. Layout plan External dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test chamber dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A Important safety information for buyers! The following steps are carried out on all of our offered chambers prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Stanje: dober (rabljeno), Weiss Model: WK3-600/70 Climatic Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -70°C to +180°C Hodpfx Afsw Inmmj Tefb Temperature change rate: Heating: 4.0 K/min Cooling: 2.5 K/min Temperature deviation: Over time: ±0.1 to ±0.5 K Spatially: ±0.5 to ±1.5 K Heat compensation: max. 2500 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: -3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ±0.1 to ±0.3 K Temperature deviation spatially: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3% RH Temperature homogeneity (spatially): ±0.5 to ±1.0 K Heat compensation: max. 500 W Test chamber volume: 600 liters Test chamber dimensions: Height: 950 mm Width: 800 mm Depth: 800 mm External dimensions: Height: 1998 mm Width: 1000 mm Depth: 1745 mm Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerant: R 404A & R23 Weight: 680 kg For your security as a buyer, please note the following information! The following points are carried out in advance on the chambers we offer: 1. Functional inspection and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate included 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications, data, and information are subject to change and errors!) For any further questions, please do not hesitate to contact us by phone.

Stanje: rabljeno, Weiss Model: WK111-600 Weiss Climate Test Chamber, Air-Cooled Key Data for Temperature Testing: Temperature Range: -5°C to +90°C Hodpfxoxu I D Do Af Tofb Temporal Temperature Fluctuation: ±0.1 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±1 K (corresponds to temperature gradient) 1 to 2 K Rate of Temperature Change: - Heating: 0.5 K/min - Cooling: 0.2 K/min Key Data for Climate Testing: Temperature Range: +10°C to +90°C Humidity Range: 10% to 98% RH Temporal Temperature Fluctuation: ±0.1 to ±0.3 K Spatial Temperature Deviation: ±0.5 to ±1 K (corresponds to temperature gradient) 1 to 2 K Temporal Humidity Fluctuation: ±1 to ±3 % Test Chamber Dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing Dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Ports: - 1 port ∅ 50 mm, installed on the left - 1 port ∅ 125 mm, installed on the right Power Supply: 1/N/PE AC 230V ±10% 50Hz Rated Power: 2.3 kW Rated Current: 10.0 A Refrigerant: R404A Chamber Volume: 600 litres Weight: 540 kg For your assurance as a buyer, please note the following: The following procedures are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. On successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see photo) (Specifications and data subject to change and error!) We would be happy to answer any further questions by phone.

Stanje: zelo dobro (rabljeno), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Hsdpjxr A R Tefx Af Tofb Product description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. This chamber is ideal for rapid temperature change testing (e.g. according to IEC, MIL‑STD, JEDEC standards) and has been well maintained. Volume & Internal Dimensions: Test volume: 60 litres Internal dimensions (basket/test chamber, W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature Ranges & Cycling: Hot chamber: +50 °C to +220 °C Cold chamber: −72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate: up to 17 °C/min Cooling rate: up to 3.7 °C/min In single mode (cold zone only) heating rate: approx. 3.2 °C/min Temperature Deviation & Homogeneity Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / Payload & Lift System Basket/lift system load: 20 kg maximum load capacity Transfer basket secured by protective grid on all sides Additional Features & Equipment Noise level: approx. 58 dB(A) during operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical Connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A External fuse: 32 A Refrigerants R-404A / R-23 Weight: 800 kg For your security as the buyer, the following procedures are performed on every chamber we offer: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.