Koncentriranost Test Instrumenta nakup rabljenega (12.585)

Stanje: zelo dobro (rabljeno), Vötsch Model: VT 7012 S2 Water-cooled Hot chamber: Temperature control range: +50°C to +220°C Temporal temperature deviation at chamber center: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate (Heating): 11 K/min Cold chamber: Temperature range: -80°C to +70°C Temporal temperature deviation at chamber center: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate (Heating): 2 K/min, (Cooling): 3 K/min Test chamber volume: 125 liters Temperature range hot chamber: +50°C to +220°C Temperature range cold chamber: -80°C to +70°C Giodpfx Afox E Tkajqjl Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm Access port: Ø 67 mm Voltage: 3/N/PE AC 400V ±10% 50Hz Power rating: 10 kW Rated current: 25 A Refrigerant: R404A / R23 Weight: 1000 kg For your safety as a buyer, please note the following information! The following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data. All information is non-binding!) For further questions, we will be happy to assist you by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, skupna dolžina: 6.060 mm, skupna širina: 2.440 mm, skupna višina: 2.590 mm, 2005 CIMC cisternski kontejner 20FT ISO tank-kontejner, 24.960 l / 1 predelek. T11, UN PRENOSLJIV parno ogrevanje spodnje praznjenje projektna temperatura: -40/+130 °C test 5Y+CSC veljaven do 08/2027 = Dodatne informacije = Gijdpfxox Iv D Uj Afqol Splošne informacije Leto izdelave: avg. 2005 Modelno leto: 2005 Teže Lastna teža: 3.800 kg Nosilnost: 32.200 kg Največja dovoljena masa: 36.000 kg Funkcionalnost Prostornina tovornega prostora: 25.000 l Znamka nadgradnje: CIMC ONE WAY 20FT, cisterna 25.000L, L4BN, UN Portable, T11 Število prekatov: 1 Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Dodatne informacije Za več informacij se obrnite na Arne Honingha.

Stanje: rabljeno, Ta oglas je za tester integritete filtrov Pall Palltronic Compact 200. Enota je v popolnoma delujočem stanju in pripravljena za takojšnjo dobavo. Giodpfoxx Avijx Afqjl

Leto izdelave: 2000, obratovalne ure: 104.382 h, Stanje: zelo dobro (rabljeno), Vötsch Shock Test Chamber VT 7012 S2 System for Extreme Temperature Changes The temperature shock test assesses the resilience of components, devices, and other products against rapid ambient temperature fluctuations. Test specimens are subjected to swift changes in air temperature, with varying upper and lower temperature loads. Through these cyclic loads and the accelerated aging caused by temperature variation, material weaknesses can be detected. Key Features: - Vertical chamber configuration - Ball screw drive for secure guidance of the carrier basket - Basket load capacity: 50 kg (VT3 7012 S2) - All-round mesh in the basket secures the test specimens - High air circulation rate, short temperature change times, and uniform temperature distribution in the test chamber - Hot chamber can be used as a temperature storage unit, cold chamber for temperature variation testing - Minimal energy consumption - No compressed air required Manufacturer: Vötsch Model: VT 7012 S2 Type: Temperature Shock Test Chamber Test Chamber Volume: 120 l Nominal Voltage: 400 V Nominal Power: 10 kW Nominal Current: 25 A Refrigerant: R452A Cooling Unit: water-cooled Shock cooling (liquid nitrogen cooling) via customer-provided nitrogen supply External Dimensions Width: 930 mm Depth: 2115 mm Height: 1970 mm Test Chamber Dimensions Width: 470 mm Depth: 650 mm Height: 410 mm Protection Class Device: IP 42 Control Panel: IP 20 Control Cabinet: IP 54 Characteristic Values for Temperature Testing in Single-Chamber Operation Temperature Range Hot chamber: +50°C to +220°C Cold chamber: -70°C to +70°C Temperature Deviation Over Time: ±2 K (steady state) Temperature Deviation Spatial: ±2 K (steady state, in basket) Heating Rate Hot Chamber: 11 K/min Cooling Rate Cold Chamber: K/min Heating Rate Cold Chamber: 2 K/min Cooling Rate Hot Chamber: K/min Inspection window: 355 x 355 mm Godpfxsx Exmte Afqjil Cable port: 67 mm Year of Manufacture: 2000 Operating Hours: 104,382 Weight: 1,000 kg More items – new and used – available in our shop! International shipping costs on request!

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.400 mm, skupna dolžina: 3.500 mm, skupna višina: 800 mm, skupna masa: 7.500 kg, Measuring plate from CMM dismantling with leveling feet Giodou Uiitepfx Afqjl

Leto izdelave: 2016, obratovalne ure: 9.195 h, Stanje: zelo dobro (rabljeno), Vötsch Temperierkammer, wassergekühlt Hier bieten wir Ihnen eine Vötsch Temperaturprüfkammer an. Vötsch 7060-5 wassergekühlte Kammer Innenmaße der Prüfzelle: Höhe: 950 mm, Breite: 800 mm, Tiefe: 800 mm Außenmaße: Höhe: 1995 mm, Breite: 1090 mm, Tiefe: 1960 mm Prüfvolumen: ca. 600 Liter Baujahr: 2016 Betriebsstunden: 9195 Durchführungen: R1: NW 125 mm L1: NW 50 mm Prüfwerte für Temperaturtests: Temperaturbereich: -72°C bis +180°C Temperaturabweichung zeitlich im Zentrum des Nutzraums: ± 0,1 bis ± 0,5 K Räumliche Temperaturabweichung: ± 0,5 bis ± 2,0 K Temperaturänderungsgeschwindigkeit: Heizen: 6,0 K/min Kühlen: 6,0 K/min Wärmeabfuhr bei 20°C max.: 5000 W Wärmeabfuhr bei -20°C max.: 5000 W Elektrischer Anschluss: Nennspannung: 3/NPE AC 400V ±10% 50Hz Nennleistung: 13,0 kW Nennstrom: 23,0 A Kältemittel: R-404A und R-23 Gewicht (ca.): 650 kg Die folgenden Informationen dienen zu Ihrer Sicherheit als Käufer! 1. Die Kammer funktioniert einwandfrei. 2. Es müssen keine Komponenten ersetzt werden. 3. Das Kältemittel ist gesetzeskonform befüllt. Zustand: gebraucht (sehr gut) (Änderungen und Irrtümer in den technischen Daten und Spezifikationen vorbehalten!) Godpfx Ast Txttofqsil

Stanje: zelo dobro (rabljeno), Vötsch Type: VCS³ 7034-5 Vötsch climate test chamber, water-cooled With a temperature change rate of 5 K/min Data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation at the center of the test space: ± 0.1 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rates: Heating: 6.8 K/min Cooling: 6.7 K/min Data for climatic test: Temperature range: +10°C to +95°C Temporal temperature deviation at the center of the test space: ± 0.1 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation at the center of the test space: ±1% to ±3% r.h. Humidity range: 10% to 98% r.h. (Extended climatic range: 2°C / 95% r.h. regulated for max 2 hrs) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side port: 50 mm Side port: 125 mm Operational data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V±10 %, 50 Hz Rated power: 9 kW Rated current: 20 A Required site fuse: 63 A slow-blow Refrigerants: R404A/R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in technical data and specifications are reserved!) Giedpsx Elt Hjfx Afqol If you have any further questions, we would be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, 2007 CIMC 40FT FLATRACK FLUSH FOLDING Zložljiv, možno zlaganje Lastna masa: 5.100 kg Največja nosilnost: 39.800 kg Največja dovoljena skupna masa: 50.000 kg CSC: 12/2027 = Dodatne informacije = Leto izdelave: avg. 2007 Letnik modela: 2007 Gjdpfxox Ir Ato Afqsil Lastna teža: 5.100 kg Nosilnost: 39.800 kg Dovoljena skupna masa: 44.900 kg Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Za več informacij se obrnite na Arne Honingh.

Stanje: rabljeno, Ta ponudba je za komplet za preverjanje kakovosti pare KSA SQ1E Steam Quality Test Kit. Sistem je v odličnem delovnem stanju in pripravljen za takojšnjo uporabo. ----- Pregled sistema KSA SQ1E je prenosna, z zrakom hlajena enota za preverjanje kakovosti pare, zasnovana za izvajanje preskusov ne-kondenzirajočih plinov (NCG), suhosti in pregrevanja v skladu s standardoma EN 285 in HTM. Predstavlja popolno, samostojno rešitev za validacijo čistih in čistih parnih sistemov, ki se uporabljajo v farmacevtski, biotehnološki ter zdravstveni industriji. V nasprotju s tradicionalnimi sistemi SQ1E uporablja vgrajen električni kondenzator s ventilatorjem, s čimer odpravlja potrebo po hladilni vodi ter omogoča izvajanje testiranj kjerkoli z minimalno pripravo. Kompaktna in vzdržljiva zasnova je idealna za terenska testiranja, validacije in kvalifikacijska dela s paro. ----- Glavne sestavine KSA SQ1E enota za preverjanje kakovosti pare – popolnoma z zrakom hlajen kondenzatorski sklop z vgrajeno bireto in merilnim valjem za testiranje NCG ter suhosti. Sklop za test suhosti in pregrevanja – vključuje ekspanzijsko cev, pitot cevi, bučko ter priključke za temperaturno sondo. Integrirana bireta in merilni valj – osvetljena in opremljena s funkcijama ničeliranja ter pavze z enim pritiskom za natančne meritve. Napajanje – 12 V DC pogon za ventilator kondenzatorja in notranjo elektroniko. Set za priklop na paro – vključuje tri-clamp in cevne priključke za povezavo s čistimi parnimi sistemi. Prenosni kovček – kompakten in robusten ohišje z ročajem in delovno polico za terenska testiranja. Navodila za uporabo in dokumentacija – vključuje standardne preskusne postopke, napotke za nastavitev in predloge za rezultate. ----- Ključne lastnosti Z zrakom hlajeni kondenzator odpravlja potrebo po zunanji hladilni vodi. Izvaja vse zahtevane teste kakovosti pare: ne-kondenzirajoči plini, suhost in pregrevanje. Vgrajena bireta in merilni valj za natančne, ponovljive meritve. Funkcija ničeliranja, pavza in osvetlitev za enostavno uporabo. Prenosna Plug & Play zasnova, idealna za validacijo in testiranje na lokaciji. Popolna skladnost z EN 285, HTM ter farmacevtskimi standardi za čisto paro. ----- Tehnične specifikacije Proizvajalec: KSA (Keystone Scientific / KSA Pharma) Model: SQ1E Tip: komplet za preverjanje kakovosti pare Napajanje: 12 V DC Godpfxsxqqyye Afqjil Način hlajenja: z zrakom hlajen kondenzator z ventilatorjem Funkcije: NCG, test suhosti in pregrevanja Delovanje: ročno/prenosno Skladnost: EN 285, HTM, AAMI, PDA smernice Izvedba: elementi iz nerjavečega jekla in aluminija v robustnem prenosnem kovčku

Leto izdelave: 2016, obratovalne ure: 14.242 h, Stanje: zelo dobro (rabljeno), Vötsch temperaturna testna komora, vodno hlajena Tukaj vam ponujamo Vötsch temperaturno testno komoro. Vötsch 7060-5 vodno hlajena komora Dimenzije testne komore: višina: 950 mm, širina: 800 mm, globina: 800 mm Zunanje dimenzije: višina: 1995 mm, širina: 1090 mm, globina: 1960 mm Kapaciteta testne komore: približno 600 litrov Letnik izdelave: 2016 Delovni čas: 14.242 ur Priključne odprtine: R1: NW 125 mm L1: NW 50 mm Podatki za temperaturne teste: Gjdpfx Ajt Txqrsfqjil Temperaturno območje: -72°C do +180°C Temperaturno odstopanje v času v središču uporabnega prostora: ± 0,1 do ± 0,5 K Prostorsko temperaturno odstopanje: ± 0,5 do ± 2,0 K Hitrost spremembe temperature: Segrevanje: 6,0 K/min Hlajenje: 6,0 K/min Kompenzacija toplote pri 20°C: maks. 5000 W Kompenzacija toplote pri -20°C: maks. 5000 W Električni priklop: Nazivna napetost: 3/NPE AC 400V ±10% 50Hz Nazivna moč: 13,0 kW Nazivni tok: 23,0 A Hladilno sredstvo: R-404A in R-23 Teža (približno): 650 kg Za vašo varnost kot kupca upoštevajte naslednje: 1. Komora deluje brezhibno. 2. Nobene komponente ni potrebno zamenjati. 3. Hladilno sredstvo je napolnjeno skladno z zakonodajo. Stanje: rabljeno (odlično) (Spremembe in napake v tehničnih podatkih in specifikacijah so pridržane!)

Stanje: zelo dobro (rabljeno), CTS Gedpjx Ekupjfx Afqjil Model: C-40/350 Climate Test Chamber, Air-Cooled For sale is a professional CTS climate test chamber, model C-40/350. This unit is designed for demanding environmental simulations in industrial applications and is ideal for materials testing, electronics, automotive, aerospace, and research sectors. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K (over time) - Temperature change rate according to IEC 60068-3-5: - Heating: 3.5 K/min - Cooling: 4 K/min - Heat compensation: - Approx. 3500 W at +20°C - Approx. 2000 W at -20°C Climate Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to +78°C - Temperature deviation: ≤ 1.0 K (over time) - Humidity deviation: ≤ ±3.0% r.h. (over time) The technical data refer to an ambient temperature of +25°C, rated voltage of 400V, without test specimen, heat compensation or additional equipment. Options may affect performance data. Technical Specifications: - Refrigeration unit: air-cooled, low-noise, fully hermetic, stepless power adjustment via electronic monitoring and control system, eco-friendly refrigerant R404A - Test chamber floor load capacity: 150 kg/m² - Shelf: stainless steel - Shelf area: 620 x 600 mm - Max load per shelf: 35 kg - Max total load with full shelf configuration: 100 kg Control System: - 32-bit controller - LCD control panel - Digital display of set and actual values - Numeric input for set values - Error messages in clear text - RS 232 interface - Ethernet interface - Free switching channels for customer-specific test sample control Dimensions: - Test volume: 350 litres - Internal dimensions (H x W x D): 750 x 650 x 720 mm - External dimensions (H x W x D): 1800 x 850 x 1640 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level: (data not specified)

Stanje: dober (rabljeno), Klimaprüfschrank Weiss mit Feuchteregelung Hier bieten wir Ihnen einen Vötsch Umweltsimulationsschrank mit Feuchteregelung an. Modell: Vötsch 4060-10, luftgekühlt, mit Feuchteregelung Innenmaße der Prüfzelle: Höhe: 950 mm, Breite: 800 mm, Tiefe: 800 mm Außenmaße: Höhe: 2150 mm, Breite: 1225 mm, Tiefe: 2890 mm Prüfvolumen: ca. 600 Liter Betriebsstunden: 3.354 h Baujahr: 2007 Durchführungen: R1: NW 125 mm L1: NW 50 mm Daten für Temperaturtests: Temperaturbereich: -40°C bis +180°C Temperaturabweichung über die Zeit im Zentrum des Nutzraums: ± 0,1 bis ± 0,8 K Räumliche Temperaturabweichung: ± 0,5 bis ± 2,0 K Temperaturänderungsgeschwindigkeit: Gsdst E Sfgjpfx Afqjil Heizen: 9,5 K/min Kühlen: 12,0 K/min Leistungsaufnahme bei 20°C max.: 8.000 W Leistungsaufnahme bei -20°C max.: 3.000 W Daten für Klimatests: Temperaturbereich: +10°C bis +95°C Feuchtebereich: 10 % bis 95 % r.F. Temperaturkonstanz über die Zeit: ± 0,1 bis ± 0,5 K Temperaturhomogenität im Raum: ± 0,5 bis ± 1,0 K Feuchteabweichung über die Zeit: 1 bis 3 RH % Nennspannung: 3/NPE AC 400V ±10 % 50 Hz Nennleistung: 16,0 kW Nennstrom: 26,0 A Kältemittel: R-404A Das Schienenpaar für das Ein- und Ausrollen ist vorhanden. Zwei Kammerböden: einer komplett, einer mit Lochdurchmesser 300 mm. Gewicht (ca.): 1020 kg Hinweise für Ihre Sicherheit als Käufer: 1. Die Kammer funktioniert einwandfrei. 2. Es müssen keine Komponenten ersetzt werden. 3. Kältemittel ist vorschriftsmäßig gefüllt. Zustand: gebraucht (hervorragend) (Änderungen und Irrtümer bei den technischen Angaben vorbehalten!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, Schulz Schulz Electronic Power Test Cabinet with 8× Delta Elektronika SM330-AR-22 – 26.4 kW Laboratory Power Supply System Year of manufacture: 2023 For sale is a high-quality industrial test and power supply cabinet from Schulz Electronic, equipped with 8 programmable Delta Elektronika SM330-AR-22 power supplies. The system originates from a professional laboratory environment and is ideal for development, testing, burn-in, and automated test processes. Features & Equipment: - 8 × individually operable SM330-AR-22 laboratory power supplies - Each power supply with precise voltage and current regulation - Sequence/automatic mode for complex testing routines Gijdpfjx Eb Haox Afqel - Large control cabinet with: - Main switch - Start/Stop - Emergency stop - Side panels for optimal ventilation - Castors for easy transport - Network labels available (e.g. CTSK05 #01 172.25.108.201) Technical specifications: Control cabinet (SE6607X-23BA0065-1): - Input: 400 VAC (three-phase) - Max current: 63 A - Total output: 8 × 3.3 kW = 26.4 kW - Protection class: IP20 Power supplies (Delta SM330-AR-22): - Output up to approx. 330 V / 22 A - High-resolution display - Fully programmable - Industrial quality – extremely reliable Condition: used The test cabinet is in very good condition. Displays are clear, controls are clean, and the cabinet is sturdy. No visible damage. Scope of delivery: (see photo) - Complete Schulz Electronic test cabinet - 8 × Delta Elektronika SM330-AR-22 power supplies - Integrated control/operator section - Castors mounted (Changes and errors in the technical data and information reserved!) Further questions can gladly be answered by phone.

Stanje: zelo dobro (rabljeno), CTS CW‑60/5.5 – Climate Test Chamber Water-cooled The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple specimens. Device Description The climate test chamber allows for the functional and material property testing of test items under the influence of temperature and humidity. Efficient air circulation and high recirculated air volume ensure uniform thermal transfer to the specimens. The air conditioning unit is located at the rear of the chamber interior. The system’s components are mounted in a separate, easily accessible frame behind the chamber. Control is housed within a dedicated control panel; the operator interface is integrated into the cabinet door. The chamber is equipped with a self-regenerating compressed air dryer for dehumidification. Fresh air purging is possible via a blower. Technical Performance Data: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test item and radiant heat, measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Gijdpfxjx Eaxbo Afqjl Climate Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range: +5°C to +89°C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 - ±3 % rH over time Performance data is based on an ambient temperature of +25 °C, rated voltage 400 V, without test items, without radiant influence, and without additional equipment. Dimensions: Internal Dimensions (Test/Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: ~2000 mm; Width: ~2000 mm; Depth: ~1400 mm (slight variations possible depending on configuration) External Dimensions: - Height: ~2300–2500 mm - Width: ~2300–2600 mm - Depth: ~1700–2200 mm (depending on doors, frame, accessories, etc.) Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Specification: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight forwarder available – costs & arrangements on request - Scope of delivery: See images (We reserve the right to make changes and correct errors in the technical data!) Please contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), CTS CW‑60/5.5 – Climate Test Chamber Water-cooled The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple specimens. Device Description The climate test chamber allows for the functional and material property testing of test items under the influence of temperature and humidity. Efficient air circulation and high recirculated air volume ensure uniform thermal transfer to the specimens. The air conditioning unit is located at the rear of the chamber interior. The system’s components are mounted in a separate, easily accessible frame behind the chamber. Control is housed within a dedicated control panel; the operator interface is integrated into the cabinet door. The chamber is equipped with a self-regenerating compressed air dryer for dehumidification. Fresh air purging is possible via a blower. Technical Performance Data: Giedpfsx Eabpex Afqol Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test item and radiant heat, measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range: +5°C to +89°C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 - ±3 % rH over time Performance data is based on an ambient temperature of +25 °C, rated voltage 400 V, without test items, without radiant influence, and without additional equipment. Dimensions: Internal Dimensions (Test/Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: ~2000 mm; Width: ~2000 mm; Depth: ~1400 mm (slight variations possible depending on configuration) External Dimensions: - Height: ~2300–2500 mm - Width: ~2300–2600 mm - Depth: ~1700–2200 mm (depending on doors, frame, accessories, etc.) Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Specification: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight forwarder available – costs & arrangements on request - Scope of delivery: See images (We reserve the right to make changes and correct errors in the technical data!) Please contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), CTS CW‑60/5.5 – Climate Test Chamber Water-cooled The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple specimens. Device Description The climate test chamber allows for the functional and material property testing of test items under the influence of temperature and humidity. Efficient air circulation and high recirculated air volume ensure uniform thermal transfer to the specimens. The air conditioning unit is located at the rear of the chamber interior. The system’s components are mounted in a separate, easily accessible frame behind the chamber. Control is housed within a dedicated control panel; the operator interface is integrated into the cabinet door. The chamber is equipped with a self-regenerating compressed air dryer for dehumidification. Fresh air purging is possible via a blower. Technical Performance Data: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, with test item and radiant heat, measured in supply air): - Heating: 2 K/min from -40 °C to +85 °C Giedpex D Abpsfx Afqsl - Cooling: 2 K/min from +85 °C to -40 °C Climate Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range: +5°C to +89°C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 - ±3 % rH over time Performance data is based on an ambient temperature of +25 °C, rated voltage 400 V, without test items, without radiant influence, and without additional equipment. Dimensions: Internal Dimensions (Test/Usable Space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: ~2000 mm; Width: ~2000 mm; Depth: ~1400 mm (slight variations possible depending on configuration) External Dimensions: - Height: ~2300–2500 mm - Width: ~2300–2600 mm - Depth: ~1700–2200 mm (depending on doors, frame, accessories, etc.) Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (including 5 sockets) - Rated current: 86.0 A - Protection class: IP 54 Technical Specification: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight forwarder available – costs & arrangements on request - Scope of delivery: See images (We reserve the right to make changes and correct errors in the technical data!) Please contact us by phone for further questions.

Stanje: zelo dobro (rabljeno), CTS CW‑60/11 – Climate Test Chamber, Water-Cooled The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Gsdsx Anipopfx Afqjil Device Description The climate test chamber enables the evaluation of the function or material properties of a test object under the influence of temperature and humidity. The efficient air circulation with a high recirculated air volume ensures effective transfer to the specimen. The air handling unit is located at the rear of the chamber interior. The aggregates are mounted behind the unit in a separate frame, allowing good accessibility. The control system is housed in a separate switch cabinet, with the user interface integrated into the switch cabinet door. For dehumidification of the test chamber, a self-regenerating compressed air dryer is installed. Fresh air can be purged through the chamber via a blower. Technical Performance Data: Temperature Tests: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm from wall - Temperature change rate (supply air, linear): - Heating: 2 K/min from –40 °C to +85 °C - Cooling: 2 K/min from +85 °C to –40 °C Climatic Tests: - Temperature range: +10 °C to +95 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2% to ±5% r.h. *Without radiant heat, in stabilized conditions. Technical data refer to ambient temperature of +25 °C, nominal voltage 400 V, without test object, without irradiation and without additional equipment. Dimensions: Internal Dimensions (Test Chamber / Usable Space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2100 mm, Depth: 2530 mm, Height: 2200 mm (slightly variable depending on configuration) External Dimensions: - Width: 2700 mm, Depth: 5200 mm, Height: 2520 mm (may vary depending on door, frame, accessories, etc.) Operating Data: - Nominal output: 84.4 kW - Nominal voltage: 400 V 3/N 50 Hz - Nominal current: 131.4 A Technical Specifications: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Notes: - Inspection possible by appointment (46325 Borken) - Shipping via freight forwarding available – costs & arrangements upon request - Scope of delivery: (see picture) (Technical data subject to change and error!) For further questions, feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water Cooled WK3-../0 Series with SIMPAC* Controller Gijdpjx Ag R Sefx Afqsl Test Chamber Volume: approx. 600 liters Test Chamber Dimensions: Height 950 mm x Width 800 mm x Depth 800 mm External Dimensions: Height 1995 mm x Width 1090 mm x Depth 1660 mm Operational Data: Test Chamber Lighting: LED 24 V, 6.8 W / Halogen lamp 2 x 24V, 50W Rated Voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated Power: 2.3 kW Rated Current: 10 A Main Fuse (on-site): 16 A slow-blow Control Cabinet & Operator Panel Protection Class: IP 54 Max. Heat Dissipation to Ambient: 1200 W Sound Pressure Level: Approx. 46 dB(A) (measured at 1 m distance, 1.6 m height from front side) Data for Temperature Tests: Temperature Range: -5°C to +90°C Temporal Temperature Deviation at Center: ±0.1 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±1 K Temperature Gradient (to IEC 60068-3-5) Temperature Change Rate: Heating 0.6 K/min, Cooling 0.3 K/min Heat Compensation at +20°C to +50°C: 200 W Data for Climatic Tests: Temperature Range: +10°C to +90°C Dew Point Range: 4 to +89.5 °C Humidity Range: 10 to 98 % RH Temporal Temperature Deviation at Center: ±0.1 to ±0.3 K Spatial Temperature Deviation: ±0.5 to ±1 K Temporal Humidity Deviation: +1 to +3 % RH Refrigerant: R-404A Weight: 610 kg Important Information for Buyers’ Safety! The following points are carried out on all chambers we offer: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant 3. After a successful check, the chambers undergo a test run monitored with calibrated equipment. Condition: used Scope of delivery: (See photo) (Specifications and technical details are subject to changes and errors!) For any further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: For sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of ingress protection (IP) levels on enclosures and components. With optional features, tests according to IPX9K (high-pressure/jet water), ISO 20653, and additional standards are possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, in accordance with: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests: Depending on configuration, the SWT system covers a wide range of tests: - Basic configuration: IPX3 / IPX4 tests (spray and splashing water from all directions). - Optional: Higher protection classes up to IPX5 / IPX6 (jet water), and, with the relevant high-pressure kit, up to IPX9/IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection classes) or ISO 20653 (e.g., for automotive or outdoor applications), depending on the intended purpose and application. Gedpfxoxzprcj Afqoil Typical Applications: Typical application scenarios for this test chamber include: - Electronic devices or enclosures intended for outdoor or humid environments, e.g., outdoor lighting, control cabinets, units, panels. - Components for vehicles or machinery, especially if they are exposed to rain, splashing water, or high-pressure cleaning (e.g., construction equipment, e-bike, or vehicle parts). - Batteries or electrical components that must be tested for water protection – e.g., in the automotive industry or e-mobility. Technical Data: - Suitable protection classes: IPX3 / IPX4 - Oscillating tube radius (for IPX3/4 testing): standard 200 mm (for SWT 1000) – optionally up to 400 mm. - Test chamber (inner compartment) dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) - Operation / Control: Web panel or GUI for programming and test control. - Condition: used - Scope of delivery: (see images) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Stanje: dober (rabljeno), Vötsch Type: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber dimensions: Height 950 mm x Width 800 mm x Depth 650 mm External dimensions: Height 2025 mm x Width 1000 mm x Depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.3 to ± 0.8 Spatial temperature uniformity: ± 0.5 to ± 2 Cooling rate: 10 K/min Heating rate: 10 K/min Heat compensation at -20°C: 8000 W Heat compensation at +20°C: 8000 W Test volume: 480 liters Left: 1x side port ∅ 125 mm Left: 1x side port ∅ 50 mm Right: 1x side port ∅ 125 mm Chamber is water-cooled Test chamber lighting: Halogen bulb 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Giedpsxzgn Ijfx Afqol Refrigerant: R-404 A / R-23 Weight: approx. 1250 kg For your security as buyer, please note the following information: The following points are carried out in advance for the chambers we offer: 1. Functional check and replacement of any necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data subject to change or error!) For further questions feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This unit is used to test the ingress of water into enclosures. When used with a timer, the test cycle can be automated with adjustable test durations from 3 seconds to 30 hours. Compliant with DIN VDE 0470 Part 1 and EN 60529 for IPX3 and IPX4 protection class testing. The integrated recirculation system minimizes water consumption. Features - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swiveling and exchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Mechanical load data - Max. test load (distributed evenly): - Permissible test specimen weight (total for test tray): 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ±60° - Oscillation angle IPX4: approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1,900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1,900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operational data Giodpfxoxxuyto Afqol - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Specifications and technical data subject to change and errors excepted!) If you have any further questions, we would be happy to answer them by phone.

Stanje: zelo dobro (rabljeno), CTS Type: T-40/600 /011232 CTS Temperature Test Chamber, Water-Cooled Including metal supports to increase floor load capacity. Test chamber volume: 600 liters Test chamber dimensions: Height approx. 850 mm, Width approx. 850 mm, Depth approx. 830 mm External dimensions: Height approx. 1900 mm, Width approx. 1050 mm, Depth approx. 1850 mm Temperature operating range: Temperature range: -40 to +180°C Giodpewfdniofx Afqel Temperature deviation: ±0.1 to ±0.3 K over time Heating rate: 2.5 K/min Cooling rate: 3 K/min Electrical connection: 400 V +6% -10%, 3/N, 50 Hz Rated power: approx. 5.5 kW Rated current: approx. 8.5 A Refrigerant: R-404A Weight: 550 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, please feel free to call us.

Stanje: zelo dobro (rabljeno), Weiss Temperature Shock Test Chamber We are offering a temperature shock test chamber. Weiss Temperature Shock Test Chamber, air-cooled (The compressor has been replaced!) Specification: Temperature range, hot chamber: +60°C to +220°C Temperature range, cold chamber: -10°C to -80°C Changeover hot/cold chamber: 10 s Temperature constancy: ±1 K Dimensions and further data: External dimensions: Height 1990 mm Width (without and with swing arm): without approx. 1820 mm, with approx. 1915 mm Depth (without and with test chamber door): without approx. 900 mm, with approx. 1155 mm Basket (test chamber) dimensions: Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 litres Maximum load of test chamber: 20 kg Maximum load on test chamber floor: 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. pre-fuse: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of device: approx. 65 dB(A) Cascade cooling, water-cooled Electrical connection: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerants: R 404A / R23 Gisdpok E Htysfx Afqel Weight: approx. 950 kg Type: TS 130 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors!) If you have any further questions, we are happy to answer them by phone.

Stanje: zelo dobro (rabljeno), Type : DST 1000 Description : À vendre, chambre d’essai à poussière type DST1000 de Testzentrum Baden GmbH. L’appareil a été développé pour effectuer des essais de protection IP « poussière » (DIN EN 60529 / DIN 40050 Partie 9). Essais possibles avec ou sans vide. Utilisation / Caractéristiques : - Panneau de commande avec écran et boutons - Réglages manuels pour des paramétrages individuels - Séquences de test préprogrammées pour essais standardisés Données techniques : - Volume de chambre d’essai : env. 1 000 litres - Dimensions chambre (L × P × H) : env. 1 000 × 1 000 × 1 000 mm - Dimensions totales (L × P × H) : env. 1 300 × 1 000 × 2 000 mm - Tension d’alimentation : 400 V / 50 Hz, 3~N/PE - Consommation électrique : 10 A - Puissance totale : max. 2 kW - Raccord d’évacuation : bride DN100 Capacités de test / Degrés de protection : - Protégé contre la poussière IP5X - Étanche à la poussière IP6X Gjdpfx Afsxpfx Uoqjil Poids : env. 350 kg État : occasion Fourni : (voir photo) (Changements et erreurs sur les données techniques réservés !) Pour toute autre question, nous sommes disponibles par téléphone.

Stanje: zelo dobro (rabljeno), Type: WK3-340/70 Weiss Climate Test Chamber, Water-cooled Control Unit: "Touch Panel" All control and operation commands can be initiated by simply touching the function symbols on the “Touch Panel” control unit. Adjustable Feet To compensate for floor unevenness and to ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Feedthroughs The test chamber is equipped with feedthroughs on both the right and left sides. These allow measurement cables and test devices to be routed into the test space. Feedthroughs included in standard configuration: R1: nominal width 125 mm L1: nominal width 85 mm Volume: 335 liters Test Space Dimensions: Height: 750 mm, Width: 580 mm, Depth: 765 mm External Dimensions: Height: 1775 mm, Width: 870 mm, Depth: 1600 mm Specification for Temperature Tests: Minimum Temperature: –72°C Maximum Temperature: +180°C Gedpfx Ajxmg Sdefqeil Temperature deviation over time: ±0.1 to ±0.5 K Temperature uniformity spatial: ±0.5 to ±1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Specification for Climate Tests: Temperature range: +10°C to +95°C Dew point range: –3°C to +94°C Humidity range: 10 to 98% RH Temperature deviation over time: ±0.1 to ±0.3 K Temperature uniformity spatial: ±0.5 to ±1 K Humidity deviation over time: ±1 to ±3% RH Operating Data: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power: 4.9 kW Fuse required on site: 16 A slow-blow Refrigerant: R-452A/R23 Weight: Approx. 585 kg Safety Information for Buyers! The following steps are completed on our offered chambers before sale: 1. Functional inspection and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and data subject to change and errors excepted!) For further inquiries, feel free to contact us by phone.