Naprava za preizkušanje trdote, trdnomer

Reicherter | Wolpert Briro VA II | Dia Testor 2n

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Dcodpfx Absrx Rxtegei Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Stanje: zelo dobro (rabljeno), potovalna razdalja osi X: 10.000 mm, pomik osi Y: 2.100 mm, pomik po osi Z: 1.300 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 30 m/min, hitrost pomika os X: 30 m/min, hitrost podajanja osi Y: 30 m/min, hitrost podajanja os Z: 30 m/min, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 36 obr/min, vrtilni razpon: 360 °, SHW PowerSpeed 5 Travels • X-axis (bed): 10,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (horizontal spindle head): 1,300 mm Control • CNC control: Heidenhain iTNC 530 Feed rates • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head, orthogonal design • Milling head clamping range: 360 x 1° • Milling head swivel range: 180 x 1° • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Intermittent: 36 – 6,000 rpm Dcjdoxgq Ayepfx Abgei Automatic tool changer • Tool magazine for 48 tools Coolant system • Tank capacity: 500 l About MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core focus is on tool milling machines. Our services include spare parts supply, on-site customer service, machine overhauls, and CNC control upgrades. Services: - Used machinery - Spare parts - Customer service - Machine maintenance - Machine overhaul - CNC control upgrades ----- Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used fraesmaschine - used CNC milling machine - used drill milling machine - used metal milling machine - used metal mill - used metal milling machine - used CNC milling machine - CNC milling machines - CNC milling machines - milling machine - large-part machining - large component machining - large machining - CNC large-part machining - milling - SHW - PS5 - PS 5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed - SHW Powerspeed 5 - PSZ 5 - PSZ 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Stanje: dober (rabljeno), Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 10.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 3.000 mm, - CNC control Heidenhain TNC 415B - Controlled 2-axis NC milling head, 2.5° - Coolant system The machine is sold without the platen table. Accessories: Approx. 20 tool holders DIN 2080 with drawbars DIN 69872 Various spare parts such as bevel gears for the milling head and ball screw for X-axis. Technical Data: X-travel (longitudinal): 10,000 mm Dcjdpjwrzkzsfx Abgoi Y-travel (cross): 1,500 mm Z-travel (vertical): 3,000 mm Spindle taper: SK50 Spindle speed (2-speed): 35–3,000 rpm Feed rate: 6–10,000 mm/min Rapid traverse X, Y, Z: 10, 15, 10 m/min Main motor power 100% duty cycle: 37 kW Machine weight approx.: 39,300 kg Technical data, accessories and machine description are not binding.

Stanje: dober (rabljeno), Leto izdelave: 2003, stružna dolžina: 1.505 mm, Turning-milling center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power Line Dodpfx Aswzbq Tebgeci Technical specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs. Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK 63 Lower turret: X-axis: Z-axis: Driven tool speed: Number of turret stations: 12 pcs. Tool holder: VDI 40 Equipment/accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Counter spindle tailstock function - Automatic sliding doors

Stanje: rabljeno, Leto izdelave: 2013, številka stroja/vozila: 5279, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 1.600 mm, pomik po osi Z: 1.300 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 22 obr/min, Year of manufacture: 2013 Control system: SIEMENS Sinumerik 840D pl Tool holder: HSK 100-A TRAVEL PATHS Horizontal longitudinal (X axis): 8,000 mm Spindle slide vertical (Y axis): 1,600 mm Spindle horizontal cross (Z axis): 1,300 mm WIRELESS PROBE: m&h HSK 100 SIEMENS HANDHELD OPERATION DEVICE B-MPI INTEGRATED OPERATING PLATFORM 3-SIDED SPLASH AND CHIP GUARD Dedpfsu Sppwsx Abgoci CHIP CONVEYOR CLAMPING PLATE Dimensions: Length: 10,000 mm; Width: 2,500 mm WASHDOWN GUN IN WORK AREA REINFORCED COOLANT SYSTEM Pump capacity: 32 l/min at max. 20 bar Coolant tank: 2,000 l COLLISION MONITORING SYSTEM, 2-CHANNEL unit 2 monitoring channels: - 1st: Collision monitoring for orthogonal milling head (Channel 1) - 2nd: Collision monitoring for universal head (Channel 2) PENDULUM MACHINING WITH 3 WORK ZONES MULTI-AXIS INTERPOLATION FOR FREEFORM SURFACES (TRAORI, 3D tool radius compensation, spline interpolation) ROTATED AXIS COORDINATE SYSTEM 2 PICK-UP STATIONS For universal head, arranged on clamping plate Storage positions: 10 Max. tool weight: 12.5 kg Max. tool length: 200 mm Max. tool diameter: 63 mm Max. tool diameter with free adjacent position: 250 mm Tool holders: HSK 6 AUTOMATIC TOOL CHANGER Number of tools in chain magazine: 48 Max. tool diameter (full magazine): 125 mm Max. tool diameter (free adjacent positions): 250 mm Max. tool length: 500 mm Max. tool weight: 25 kg Max. tool load torque: 40 Nm Tool holder: HSK 100-A HEAD CHANGE MAGAZINE 1 UNIVERSAL HEAD WITH HIGH-FREQUENCY SPINDLE AUTOMATIC UNIVERSAL HEAD WITH INTEGRATED HIGH-FREQUENCY SPINDLE - High-frequency milling spindle: - Integrated HF spindle - Tool holder: HSK-A 63 (DIN 69893) - Main drive power: 20 kW at 100% duty cycle or 25 kW at 40% duty cycle - Speed range: up to 20,000 rpm - Spindle bearings with permanent grease lubrication - Air seal - Torque: 40 Nm at 100% duty, 50 Nm at 40% duty - Automatic tool clamping - Power transmission as per speed-power diagram GMN HCS 170 - Technical data according to data sheet E 745.1467.00 UNIVERSAL MILLING HEAD IN ORTHOGONAL DESIGN - Liquid-cooled milling head - Cast iron construction (GGG 60) - Milling head, automatically swiveling, 180 x 1 degree - All resulting positions programmable and executable via CNC - Repeat accuracy at spindle nose ±0.002 mm, indexing accuracy ±3 arcsec - Tool holder: HSK 100-A - Milling spindle with hydromechanical quick-change system - Tool pull-in force: 45 kN - Internal coolant supply, Form A-D - External coolant supply via shower ring - Speed range: 22 – 4,000 rpm MAIN DRIVE By a frequency-controlled, liquid-cooled AC motor with: 32 kW output at 100% duty cycle, 46 kW at 40% duty cycle. Direct drive without gear, for zero heat build-up or gear wear. Torque: 637 Nm at 100% duty, 875 Nm at 40% duty.

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: nepreverjeno, Tukaj vam ponujamo vrtljivo mizo znamke Parkson. Model je PAR-251 R Premer vrtljive mize je približno 250 mm. Kontaktirajte nas za neobvezujočo ponudbo. Dcodpfxoxtu Efs Abgji

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Na voljo sta dva Hermle C 800 V obdelovalna centra. Hermle C 800 V Leto izdelave: 2000 Krmiljenje: Heidenhain TNC 430 Tehnični podatki: X-os: 800 mm Y-os: 600 mm Z-os: 500 mm Dcjdpfx Absylkzzogsi Vpenjalna površina mize: 1000 x 560 mm Maksimalna obremenitev mize: 1000 kg Razdalja vreteno/miza: 100–500 mm Število vrtljajev vretena: 8000 min⁻¹ SK40 30 pozicij menjalca orodij

Leto izdelave: 1999, stanje: rabljeno, Frequency 230 Hz Workpiece length 150 mm Workpiece width 150 mm Maximum temperature ° Muffle size (length) Muffle size (width) Muffle size (depth) mm Total power requirement 210 kW Machine weight approx. 5 t Space requirement approx. m Dcjdpfx Abst Hw Ddogji FRITZ DÜSSELDORF FREIBURG CNC-controlled HF hardening and tempering system (indexing table machine) Type SM-710.8x2.2 Year built 1999 _____ This hardening plant is used for induction tempering and surface hardening of wave-shaped workpieces approx. 40 mm Ø x approx. 150 mm high, consisting of: 1 hardening unit with HF transistor inverter FCM 115 kW, 170 – 230 kHz Twin inductor, vertical stroke approx. 400 mm, horizontally adjustable, current inductor Ø approx. 60 mm, includes quenching spray and pneumatic twin tailstock as a rotating workpiece support, 1 tempering station with transistor inverter FCI-30/50 kW, 10-25 Hz Twin inductor, vertical stroke approx. 400 mm, horizontally adjustable, current inductor Ø approx. 60 mm, includes quenching spray and pneumatic twin tailstock as a rotating workpiece support, in a stroke combination with: double post-quenching/cooling station and hardness testing station, make EDDYLINER PL from IGB, with pneumatic workpiece lifting device, testing is performed with multiple frequencies. Rotary indexing table with 2 x workpiece holders, driven, and 8 switchable processing stations; the workpieces are automatically loaded and unloaded via a portal loader, make FELSOMAT Type FAZ 300; raw and finished parts are placed on stack pallets for further transport. Electrical check for presence of workpiece. 1 control cabinet with SIEMENS CNC control Type 840 D mounted on the machine, water-cooled main converter, as well as separate inverters for the hardening and tempering stations with ampere/volt/kW displays, separate power cabinet and cooling water/quenching agent recooling system Type RA 200.350 with intermediate tank. Total drive approx. 210 kVA - 400 V - 50 Hz Weight approx. 5,000 kg total Condition: good – as hardening machines typically appear, not ready for demonstration (power not connected) Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice If you have further questions, please call us. Should you have other requirements for used machines, please do not hesitate to contact us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Skupaj je na voljo 12 enot Dcjdpfx Asxxkhysbgsi

Stanje: rabljeno, Leto izdelave: 2002, Technical details: x-travel: 16,300 mm y-travel: 2,600 mm z-travel: 1,600 mm Spindle taper ISO: 50 Spindle speeds: 22 – 4,000 rpm Rapid traverse: 24 / 36 m/min Main motor: 37 kW Total power requirement: 50 kW Dcedpfx Abjv Uzt Aegji Equipped with CNC HEIDENHAIN TNC 430 automatic universal milling head automatic tool changer with 90 stations coolant system, chip conveyor *