Hausach Tvori Tehnologije Gmbh nakup rabljenega (70.724)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 1.851 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.400 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 500 kg, skupna masa: 17.000 kg, kapaciteta rezervoarja za olje: 70 l, Technical Specifications Baler: Dedpfx Aou Thbxjg Nswc Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410 BS-22/50 Year of Manufacture: 2023 Pump Operating Hours: 1,851 hours (as of July 2024) Pressing Force: 70 t (equipped with a 70 t hydraulic cylinder, special feature) Specific Press Force: 90.9 N/cm² (equipped with a 70 t hydraulic cylinder, special feature) Feed Hopper Dimensions: 1,400 x 1,000 mm Theoretical Cycle Time: 13 seconds Theoretical Throughput: 266 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 22 kW Total Connected Load: 65 kW Binding: 4-fold vertical, fully automatic Throughput Rates at Bulk Densities of: - 30 kg/m³: approx. 5.5 t/hour - 50 kg/m³: approx. 7.5 t/hour - 100 kg/m³: approx. 9.7 t/hour Bale Weights (at a bale length of approx. 1.2 m): up to 500 kg, depending on material PLC Control: Siemens S7-1500 Operator Panel: Schneider Harmony Press Dimensions, Assembled: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport Weight (Press): 17 t Special Equipment: - Wear-resistant floor made of HARDOX steel - Larger main hydraulic cylinder with 70 t pressing force - Special press ram for compacting loose bulk materials with small particle size - OptiCut XS system for reduced cutting forces and increased throughput - Special press plunger for compacting "challenging" materials Technical Data for Conveyor: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: KGF GB 1500 Year of Manufacture: 2023 Drive Power: 4.0 kW Belt Speed: approx. 0.3 m/second Feed Belt Length: 2,679 mm Inclined Belt Length: 6,866 mm Gooseneck Length: 1,272 mm Incline: 35° Usable Width: 1,400 mm Sidewall Height (Inclined Belt): 800 mm Cleat Height: 50 mm Cleat Spacing: 750 mm Belt Quality: EP 400/3, 3:1 (DIN Quality N) Overall Height: 4,515 mm Transport Dimensions (overall): 11,148 x 2,502 mm (L x W) Technical Data for Contactless Personnel Protection System: Manufacturer: BOREMA Umwelttechnik AG, Switzerland Model: APSS iBOR 22 Year of Manufacture: 2023 Condition of the Baling System: Due to its low operating time of only 1,851 pump hours and the exclusive processing of paper, cardboard, and film, the entire plant is in very good condition. Scope of Delivery: - Avermann baler, type AVOS 1410 BS-22/50, including wire feeding stations and bale chute - Avermann conveyor, type KGF GB 1500 - BOREMA personnel protection system, type APSS iBOR 22 Remarks: Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment possible. We accept no liability for technical details or possible errors.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036943, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 183 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.850 mm, skupna masa: 5.600 kg, ogrevalna zmogljivost: 11,5 kW (15,64 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 735 mm, teža orodja: 600.000 g, Injection Moulding Machines Direct from the Manufacturer! As KraussMaffei, the manufacturer, we offer you our inspected and flexible stock machines: The base injection molding machine, precisionMolding, is the perfect entry-level solution for all-electric injection molding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short delivery times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics industry, medical technology, and automotive industry. Your benefits: – Optimized price-performance ratio for a wide range of applications – High energy efficiency thanks to an all-electric machine concept – Ability to meet demanding delivery times with a base machine concept supporting a broad range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670020) CONTROL SYSTEM  MC P1 with 15" TFT colour display featuring multi-touch functions CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Clear space (h x v) mm 470 x 420  Mounting platen (h x v) mm 610 x 560  Mould installation height min. - max. mm 150 - 400  Maximum opening stroke mm 750  Maximum mould opening travel mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/back kN 22 / 22 Dodpow Ur I Ujfx Ag Nswc  Ejector speed fwd/back mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 40 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1860  Shot volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection throughput cm³/s 251  Screw drive/rotation speed 1/min 334  Plasticizing throughput (Standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heating capacity kW 11.5  Power supply V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight incl. control cabinet t 5.6  Length x Width x Height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Wear-resistant plasticizing unit  BluePower full insulation for plasticizing cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control for hot runner shut-off 1-fold  Electrical interface, cascade 4-fold  Euromap interface for handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4-fold  Automatic central lubrication system  Adaptive Process Control (APC)  Injection-compression moulding function  Graphic analysis package The machine is located at our Parsdorf plant and is available at short notice. Additional options can be provided on request. We look forward to your enquiry.

Stanje: dober (rabljeno), Leto izdelave: 2009, obratovalne ure: 20.709 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 106516-11, globina vrtanja: 1.200 mm, skupna masa: 7.500 kg, Prodajamo zelo dobro opremljen stroj za globinsko vrtanje znamke TBT z raznim priborom. Tehnični podatki: - Vreteno 1: 5–18 mm; vreteno 2: 1–4 mm Dwodpfx Aoxgnhaog Nec - Globina vrtanja: cca 1200 mm pri Ø8 mm in uporabi 3 lunet - Število vreten: 2 - Pogon vretena: Vreteno 1: 1x 4 kW; vreteno 2: 1x 1,2 kW - Hitrost vretena: Vreteno 1: 600–6000 min⁻¹;vreteno 2: 2000–24000 min⁻¹ - Hitri pomik: 15.000 mm/min - Nazivni hod vozička: 1800 mm - Hladilno-mazalno sredstvo: olje za globoko vrtanje - Prostornina rezervoarja: 1100 litrov - Obratovalna napetost: 3AC 400V, 50Hz (skupna priključna moč: 25 kW) - Stanje: dobro, ustrezno starosti - Pribor: vključno s talno kadjo in različnimi svedri Ogled na lokaciji je zaželen!

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 07/018, skupna masa: 2.900 kg, notranji premer: 2.500 mm, temperatura: 65 °C, ogrevalna zmogljivost: 4 kW (5,44 KM), nosilnost: 1.500 kg, Oprema: dokumentacija / priročnik, Čistilna naprava tip W 250 rabljena, malo uporabljena takoj dobavljiva. Uporabne mere: • Premer pralne košare: 2.500 mm • Uporabna notranja višina: 1.200 mm • Nosilnost košare: 1.500 kg z naslednjimi funkcijami: • Pranje • Izpiranje • Sušenje z vročim zrakom 2 x 10 kW • Ločilo faznih plošč za izločanje olja • Avtomatska polnilna naprava • Filter za ostružke s pokrovno pločevino za lug • Posredno segrevanje kopeli iz nerjavečega jekla/keramike Dwjdpfxjxgcx To Ag Nec • Odsesavanje hlapov • Odsesavanje izpiralne vode • Avtomatska naprava za črpanje s talnim izpiranjem • PLC z upravljalno ploščo • Izvlečna pralna košara s transportnim vozičkom Nova cena trenutno približno 160.000 € Ponudbena cena 70.000 € nepakirano, EXW Bad Salzuflen. Plačilo: takoj neto.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: nepreverjeno, moč: 265 kW (360,30 KM), Compact, high-efficiency combined heat and power (CHP) unit equipped with a state-of-the-art SCANIA 6-cylinder, lean-burn turbocharged, 4-stroke gas Otto engine. Unit, gas pressure regulating section, air-fuel and engine water cooling circuits mounted on a base frame for power and heat generation. Fitted with a premium synchronous generator (3P, 400V, 50Hz) for grid-parallel operation and optimized heat extraction via plate heat exchanger for heating water/process heat with a flow temperature level of 90°C / return 75°C. Includes a catalytic converter (SCR system optional) for low-emission operation compliant with MCP Directive (EU) and 44th BImSchV (Germany). TECHNICAL DATA GENSET / CHP – NATURAL GAS / BIOMETHANE Electrical output at cos φ=1: 265 kWel Electrical efficiency: 41.9 % Thermal efficiency: 44.1 % Total efficiency: 86.0 % Thermal output from engine: 150 kWth Thermal output @ 120°C exhaust: 129 kWth Total thermal output: 279 kWth Power-to-heat ratio: 0.95 LEAN-BURN-TURBO NATURAL GAS / BIOMETHANE ENGINE Engine design: 6R Displacement: 12.7 L Combustion heat input – 100% load: 632 kWel Gas consumption: 63.2 Nm³/h Dimensions (L x W x H) m: 4.1 x 1.5 x 2.1 The CHP comes with a control cabinet featuring a display for visualization of all relevant operating parameters, including a DSL modem for remote maintenance and external monitoring. It is also equipped with an interface for balancing energy to connect to the E2M energy pilot. A grid starter for optimal starting speed, as well as a gas detector, smoke detector, emergency stop switch, and alarm beacon/siren are included in the scope of delivery. All pipelines are made of stainless steel (V2A), insulated where necessary. The CHP complies with the medium voltage directive VDE-AR-N 4110:2018-11. Dsdpfot E N I Sex Ag Newc An automatic gas shut-off valve for installation outside the CHP room, as well as all operating fluids, are not included in the delivery scope. The CHP unit is also available in a containerized version, if required.

Leto izdelave: 2022, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 5861, (Please state your offer price) Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. Dwedpfx Asuy Ti Rjg Nec All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 3.641 h, Funkcionalnost: omejena funkcionalnost, stiskalna sila: 36 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.080 mm, širina bale: 1.100 mm, višina bale: 750 mm, moč: 15 kW (20,39 KM), lastna masa: 4.000 kg, volumenski pretok: 90 m³/h, Technical Data – Baler: Manufacturer: Presto GmbH & Co. KG Model: CC 36 M Year of Manufacture: 2010 Operating Hours: 3,641 h Main Press Force: 36 t Specific Pressing Force: 467 N/cm² Feed Hopper Dimensions: 1,080 x 1,100 mm (L x W) Cycle Time: 34 seconds Filling Volume per Press Cycle: 0.85 m³ Theoretical Throughput: 90 m³/hour Throughput under Operating Conditions (at material bulk density of 35 kg/m³): approx. 51 m³/hour Bale Dimensions: 1,100 x 750 mm (W x H), length variable Drive Power: 15 kW Binding: 4-fold vertical, semi-automatic, with polyester twine Throughput at Bulk Density of: - 35 kg/m³: 1.8 t/hour - 60 kg/m³: 2.5 t/hour Dwedpfxsu Thh Eo Ag Noc - 100 kg/m³: 3.1 t/hour Transport Dimensions (Baler only): 4,200 x 1,640 x 2,200 mm (L x W x H) Machine Weight (Baler): approx. 4 t Remarks: The baler has been function-tested in our workshop, subsequently stored, and is thus available at short notice. Complete machine documentation (operating manual, CE certificate, electrical and hydraulic schematics) is available. Viewing by appointment is possible. We assume no liability for the technical specifications or possible errors.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036936, vpenjalna sila: 800 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 1.837 letvica, injekcijska masa: 123 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.820 mm, skupna masa: 5.900 kg, ogrevalna zmogljivost: 8,9 kW (12,10 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 470 mm, teža orodja: 600.000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, enabling rapid and innovative responses to market requirements. It combines high performance, user-friendly operation, and short delivery times. The machine can be used across various application areas, such as the packaging industry, electrical and electronics industry, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the all-electric machine concept – Fast delivery times realised through basic machine concept with a broad spectrum of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.:61036936, new, Year 2023) CONTROL SYSTEM • MC P1 with 15" TFT colour display and multi-touch function CLAMPING UNIT • Clamping force kN 800 • Maximum mould opening force kN 120 • Daylight (h x v) mm 470 x 420 • Mounting platens (h x v) mm 610 x 560 • Minimum - maximum mould height mm 150 - 400 • Maximum opening stroke mm 750 • Maximum mould opening travel mm 350 • Ejector drive electric • Ejector stroke mm 100 • Ejector force forward/back kN 22 / 22 • Ejector speed forward/back mm/s 300 / 300 • Maximum mould weight kg 600 INJECTION UNIT • Screw diameter / type mm 35 / standard • Effective L/D ratio 20.0 • Injection pressure bar 1837 • Stroke volume cm³ 135 • Shot weight at max. stroke (PS) g 123 • Injection speed mm/s 200 • Injection flow rate cm³/s 192 • Screw drive / speed 1/min 382 • Plastification rate (standard screw) g/s 19.5 • Nozzle contact force kN 30 ELECTRICAL PARAMETERS • Connected load kW 17.8 • Installed heating capacity kW 8.9 • Power supply V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet t 5.9 • Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT • Wear-resistant plastification • BluePower full insulation of plastification cylinder • Open nozzle • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single Dedpfx Agsuggb Do Newc • Electrical interface (cascade), 4-fold • Electrical preparation for hydraulic auxiliary unit • Euromap interface for handling, E18, E63 • Euromap interface (central computer), E67, E77 • Water manifold, 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression moulding function • Graphics analysis package • Swivelling device for injection unit The machine is located at our factory in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Rental or purchase of school containers Temporary classrooms or office use possible Djdpfsgk Dfnjx Ag Nowc Ideal as a temporary alternative for lease 7 classrooms, 2-storey, ENEV 2016 compliant, can be used for up to 5 years Custom configurations available Minimum rental period: 36 months Quoted rental price is for one year, plus additional costs for special requests, transport, crane, and assembly All prices plus VAT. Further details available upon request The container facility is dismantled and located in storage Ref. no. AZ409000

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Mobile welding fume extractor, BGIA-certified, hose version with 1 extraction arm, 3.0 m, outer diameter = 150 mm Dwjdpfjwc Un Iox Ag Noc

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, moč: 350 kW (475,87 KM), Compact, highly efficient combined heat and power (CHP) unit featuring a state-of-the-art SCANIA V8 cylinder, lean-burn turbocharged 4-stroke gas Otto engine. The genset, gas pressure regulation line, and integrated mixture and engine water cooling circuits are mounted on a base frame for the generation of electricity and heat with a high-quality synchronous generator (3-phase, 400V, 50Hz) for grid-parallel operation. Optimized heat extraction is achieved via a plate heat exchanger for heating water/process heat with a supply/return temperature level of 85°C / 70°C. OPTIONAL: Equipped with a catalytic converter (optional SCR system) for low-emission operation compliant with the MCP Directive (EU) and 44th BImSchV (DE). TECHNICAL DATA GENSET /CHP – Biogas 50% CH4 Electrical output at cos φ=1: 350 kWel Electrical efficiency: 41.4 % Thermal output (engine) at 180°C exhaust temperature: 334 kWth Power ratio el/th: 1.05 Engine type: V8 Displacement: 16 liters Firing thermal input – 100% load: 845 kW Gas consumption at 50% CH4: 169.1 Nm³/h Dimensions (L x W x H, meters): 4.1 x 1.5 x 2.1 Weight (dry): 4,500 kg The CHP unit features a control cabinet with a display visualizing all relevant operating parameters, including a DSL modem for remote maintenance and external monitoring, as well as an interface for balancing energy connection to the E2M energy control system. Delivery includes a grid starter to provide optimum cranking speed, as well as a gas detector, smoke detector, emergency stop switch, and visual/audible alarm (strobe light/horn). All piping is constructed of stainless steel (V2A) and insulated where required. Dwsdet Uu Ezopfx Ag Njc To ensure the engines remain at operating temperature, the installed heat pumps are programmed to start in a predetermined cycle to maintain the desired temperature. An automatic gas shut-off valve for installation outside the CHP installation room is not included in the delivery scope. The CHP complies with the medium-voltage directive VDE-AR-N 4110:2018-11. An automatic gas shut-off valve for installation outside the CHP room, as well as all operating fluids, are not included in the delivery scope. Alternatively, the CHP can also be delivered in a container. The entire genset is also available in a natural gas configuration.

Stanje: rabljeno, moč: 7 kW (9,52 KM), Leto izdelave: 2023, With the RS1500 recycling screen, you receive a compact drum screen, which requires very little space yet is capable of separating large quantities of screened material. A key advantage is that the drum screen can be transported on public roads as a TÜV-approved trailer at speeds up to 80 km/h, providing you with maximum flexibility regarding the location of use when you purchase this unit. This is especially beneficial for earthworks, civil engineering, and landscaping projects. The small drum screen weighs only 2.4 tonnes. Dsdpfx Aerrvyuog Njwc With a total weight of 3.5 tonnes, it can be transported to your construction sites just as conveniently as the smaller drum screens. The hydraulic tipping grid allows you to remove larger stones or clay lumps at the very beginning of the process. Depending on the mesh size, you can also screen even fine gravel. This makes it extremely valuable for processing topsoil and concrete recycling, enabling you to achieve significant savings on landfill costs when you purchase a drum screen! REMAV GmbH is a technologically leading manufacturer of recycling and screening systems. At our Viernheim location, we specialize in the production of plants for the processing of materials in the sand, gravel, and recycling sectors.

Stanje: dober (rabljeno), Leto izdelave: 2015, obratovalne ure: 19.173 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 150 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 2.000 mm, širina bale: 1.100 mm, višina bale: 750 mm, skupna masa: 35.800 kg, kapaciteta rezervoarja za olje: 4.300 l, Technical Specifications Baling Press: Manufacturer: Europress Umwelttechnik GmbH, Germany Model: EP5 150 V5 Year of manufacture: 2015 Operating hours: 19,173 hours Number of bales pressed: 282,961 bales Ram strokes: 1,895,112 strokes Pressing force (main press): 150 t Specific pressing force: 181.8 N/cm² Feed chute dimensions: 1,000 x 2,000 mm (W x L) Bale dimensions: 750 x 1,100 mm (H x W), length variable Drive power: 2 x 55 kW + 15 kW + 2 x 0.75 kW Rated current: 230 A Supply cable cross-section: 120 mm² Tying: 5-fold vertical, fully automatic Hydraulic oil tank capacity: 4,300 L PLC: Siemens S7 / ET200S Transport weight (press): 35,800 kg Special Features: Base plates and side walls made of HARDOX Waste ejector in front of counter blade, with cleaning cycle Scope of delivery: 1 baling press 1 control cabinet 1 set of oil drip trays under the press 1 maintenance platform on the press channel 1 feed hopper 1 discharge chute 10 wire reel stands 2 wire feeding stations with deflection pulleys 1 set of machine documentation (operation manual, electrical schematic, hydraulic schematic, CE declaration of conformity) Remarks: The machine is still fully assembled and available at short notice. Dismantling and loading are to be arranged by the buyer. The documentation (operation manual, electrical circuit diagram, hydraulic schematic, CE declaration of conformity) is complete and available in German. Inspection possible by prior arrangement. No liability is accepted for the technical data or possible errors. Dwedpfx Ageu Thfdo Njc

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036683, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1,892 letvica, injekcijska masa: 358 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 100 mm, odmični hod: 950 mm, vgradna višina: 500 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 9.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 7 kW (9,52 KM), vrsta goriva: dizel, skupna masa: 2.400 kg, Leto izdelave: 2023, RS1500 znamke REMAV. Nova naprava, s TÜV certifikatom. Dodpfx Ajuccyzjg Newc

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, skupna masa: 9.500 kg, širina odprtine za polnjenje: 420 mm, dolžina polnilne odprtine: 1.250 mm, Technical Data for Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Filling opening (feed chute): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depends on material Drive power: 30 kW Total connected load: 40 kW Total current consumption: 70 A Throughput for empty beverage cans: - with one compaction cycle: approx. 1.7 t/hour - with two compaction cycles: approx. 2.5 t/hour Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank volume: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Dwedpfeu Th S Sjx Ag Noc Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal trimmings, steel sheet, as well as aluminum, brass, and copper scrap. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition and is sold with a 12-month OBM spare parts warranty. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagrams). Inspection is possible by appointment. We do not assume liability for the technical specifications or possible errors.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036940, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1,892 letvica, injekcijska masa: 358 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 100 mm, odmični hod: 950 mm, vgradna višina: 500 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 9.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The entry-level injection moulding machine, precisionMolding, is the perfect solution for fully electric injection moulding, enabling you to respond quickly and innovatively to changing market demands. It combines high performance, easy operation, and short delivery times. The machine is suitable for a wide range of applications, such as the packaging industry, electronics and electrical industry, medical technology, and the automotive sector. Your benefits: – Optimized price-performance ratio for a broad range of applications – High energy efficiency thanks to a fully electric machine concept – Reliable and efficient delivery times due to a base machine concept with a wide spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, year 2013) CONTROL SYSTEM - MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: 1600 kN - Maximum mould opening force: 120 kN - Daylight (H x V): 570 x 520 mm - Mounting platen (H x V): 770 x 720 mm - Mould installation height min. – max.: 200 – 500 mm - Maximum opening width: 950 mm - Maximum mould opening stroke: 450 mm - Ejector drive: electric - Ejector stroke: 100 mm - Ejector force, forward/reverse: 33 / 33 kN - Ejector speed, forward/reverse: 300 / 300 mm/s - Maximum mould weight: 1200 kg INJECTION UNIT - Screw diameter / type: 50 mm / standard - Effective L/D ratio: 20.2 - Injection pressure: 1,892 bar - Stroke volume: 393 cm³ - Shot weight at max. stroke for PS: 358 g - Injection speed: 200 mm/s - Injection flow rate: 393 cm³/s - Screw drive / rotation speed: 267 rpm - Plasticizing throughput (standard screw): 36.5 g/s - Nozzle contact force: 42 kN ELECTRICAL PARAMETERS - Connected load: 31.2 kW - Installed heating capacity: 15.5 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight (incl. control cabinet): 9.7 t Dwjdpfx Asugfw Djg Noc - Length x width x height: 5.65 x 1.82 x 1.95 m ADDITIONAL FEATURES - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot runner shut-off, single - Electrical interface for pneumatic cascade, 4-fold - Euromap interface for handling: E18 + E67 - Euromap interface (central computer): E67, E77 - Water manifold, 4-fold - Electrical pre-installation for hydraulic auxiliary unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding circuit - Graphic analysis package - Swivel device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Stanje: rabljeno, moč: 7 kW (9,52 KM), Leto izdelave: 2023, With the RS1500 recycling screen, we offer you a compact trommel screen that requires minimal space while being able to separate large amounts of material. The major advantage is that this trommel screen can be transported on public roads as a TÜV-approved trailer for passenger cars at speeds of up to 80 km/h, providing you with maximum flexibility regarding deployment locations when you purchase this trommel screen. This makes it particularly advantageous for use in civil engineering, utility construction, and landscaping projects. The compact trommel screen weighs just 2.4 tonnes. For challenging soil conditions, we recommend the KS220 and KS275 compact screens! With a total weight of 3.5 tonnes, it can also be conveniently transported to your construction sites, just like the smaller trommel screen. The hydraulic tipping grid allows larger stones or clay lumps to be pre-sorted at the very beginning of the process. Depending on the mesh size, you can even screen out fine chippings. This makes it a valuable asset for processing topsoil and recycling concrete, enabling you to significantly reduce disposal costs when you purchase a trommel screen! Dwodjrrvx Tspfx Ag Nsc REMAV GmbH is a technological leader in the manufacturing of recycling and screening plants. At our Viernheim location, we specialize in the production of equipment for processing valuable materials in the fields of sand, gravel, and recycling materials.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Technical specifications of the EPS (Styrofoam) compactor: Manufacturer: FZ-Recycling GmbH & Co. KG, Germany Model: FZR 320 Year of manufacture: 12/2022 Shredder drive power: 4 kW Compactor screw drive power: 7.5 kW Hydraulic unit drive power for retaining clamp in press channel: 1.1 kW Dwsdpfx Aou Thkajg Nec Total connected load: 12.6 kW Rated current: 32 A Compaction ratio of pressed blocks to original material: approx. 50:1 (material dependent) Block weight after compaction: approx. 300 kg/m³ (material dependent) Block dimensions: 320 x 320 mm, length variable Throughput: approx. 100 kg/hour, depending on material Achievable density: approx. 250–300 kg/m³ The pressed blocks are stacked to about 1400 mm high on a pallet and wrapped with stretch film. Machine dimensions: approx. 4,600 x 1,400 x 1,980 mm (L x W x H) Transport weight of compactor: 1,325 kg Condition of the compactor: The machine has only been used occasionally, is in very good condition, and is available at short notice. Due to the low weight of the compactor and the forklift shoes in the transport frame, the machine is mobile and can be used directly at the material generation point, such as on construction sites. Electrical connection is provided via a CEE 32 A plug. Scope of delivery: 1 unit EPS compactor, ready to connect and operate Remarks: The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. An inspection is possible by appointment. We assume no liability for technical data or possible errors.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036946, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 183 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.850 mm, skupna masa: 5.600 kg, ogrevalna zmogljivost: 11,5 kW (15,64 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 735 mm, teža orodja: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base-level injection moulding machine, precisionMolding, represents the perfect entry-level solution for all-electric injection moulding, ensuring fast and innovative responses to market demands. This machine combines high performance, intuitive operation, and short delivery times. It can be utilised in a range of applications such as packaging, electrical and electronics industries, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the fully electric machine concept – Fast delivery through a base machine concept with a broad range of options available TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM  MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Maximum mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platen (h x v) mm 610 x 560  Mould height min. – max. mm 150 - 400  Maximum opening span mm 750  Maximum mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22 Dodpjud H Dmefx Ag Njwc  Ejector speed fwd/rev mm/s 300 / 300  Maximum mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 40 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1860  Shot volume cm³ 201  Max. shot weight for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticising rate (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heating capacity kW 11.5  Power supply V / Hz 400 / 50 3 phase with neutral conductor WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Wear-resistant plasticising unit  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve, single (BWAP)  Pneumatic operation for hot runner shut-off, single  Electrical cascade interface, 4-fold  Euromap interface (handling), E18, E63  Euromap interface (central computer), E67, E77  Water manifold, 4-fold  Automatic central lubrication system  Adaptive Process Control (APC)  Injection-compression moulding circuitry  Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 56.748 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 5.400 kg, širina rotorja: 1.600 mm, moč: 45 kW (61,18 KM), največja hitrost vrtenja: 107 obr/min, letalni krog rotorja: 380 mm, delovna širina: 1.600 mm, širina rezila: 40 mm, Technical specifications of the shredder: Dsdpfxeu Thabe Ag Njwc Manufacturer: ZENO Zerkleinerungsmaschinenbau Norken GmbH Model: ZTLL 1400 x 1600 Year of manufacture: 2010 Operating hours: 56,748 h Infeed opening: 1400 x 1600 mm Main drive power: 45 kW Rated current: 81 A Hydraulic pusher drive: 2.2 kW Rotor diameter: 380 mm Rotor speed: approx. 107 rpm Number of cutting tools: 52 knives, 40 x 40 mm, with tool holders Screen perforation: 40 mm Weight: approx. 5,400 kg Scope of delivery: The shredder with control cabinet only is offered for sale. The discharge conveyor belt and the pneumatic conveyor system are not included in the scope of delivery. Note: The shredder was used for size reduction of nonwoven fabrics, needle felt, etc. and is in good, immediately operational condition. It is being replaced by a larger shredder due to insufficient throughput. The machine is currently still assembled and can be inspected under power. Remarks: Complete documentation (operation manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment. We do not assume liability for technical data or potential errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, moč: 9,7 kW (13,19 KM), Technical Data Cardboard Shredder (2-shaft shredder): Manufacturer: Presto GmbH & Co. KG Model: PZA Year of manufacture: 2011 (38,761 h), 2007 (52,386 h), 2007 (52,998 h), and 2007 (55,325 h) Operating hours recorded as of November 2021 Throughput volume: 130 m³/h Speed: 37/9 rpm Motor power: 7.5 / 2.2 kW Electrical connection: 32 A Shredder chamber dimensions: 1,490 x 1,320 x 530 mm (L x W x H) Shredder external dimensions without cover: 2,308 x 1,320 x 685 mm (L x W x H) Machine weight: 0.45 t Application: The four Presto PZA cardboard shredders were in operation until 15.12.2021 at a Dutch logistics center, used to pre-shred loose and upright cartons from the returns department before pressing them into bales. Cartons were manually placed onto the feed conveyor and transported directly to the shredder by a slide belt conveyor for shredding. The pre-shredded cartons were then conveyed over hundreds of meters to a baler for compaction. Dwodju Tha Iopfx Ag Nsc Scope of supply: 4 units Presto Cardboard Shredder (2-shaft shredder) model PZA Remarks: The cardboard shredders were an essential part of the disposal line and have been well maintained to ensure high availability for the returns department. The machines are in good condition and ready for immediate use. The price is per unit ex works our warehouse in Siddeburen, Netherlands. Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment. No liability is assumed for technical details or possible errors.

Leto izdelave: 2015, Stanje: delavnici obnovljeno (rabljeno), Technical data of feed bunker with hydraulic moving floor and bag opener: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Bunker volume: 30 m³ Drive power: 17.5 kW Dimensions in current condition: 13,200 x 3,050 x 4,350 mm (L x W x H) Condition of the machine: The feed bunker with bag opener was in operation at a large recycling facility, where bagged waste was tipped into the bunker using wheel loaders. The bags were opened by the bag opener, and the waste was conveyed in controlled portions for further processing. The plant functioned flawlessly until dismantling and was replaced by a larger system with higher throughput capacity. Notes: The machine is currently undergoing refurbishment in our workshop. The photographs show the machine in its current refurbishment phase; therefore, the unit is not yet fully assembled. Upon completion of refurbishment, scheduled for February 2025, the machine will be tested in operation (without material input). Dwsdpfx Agsu R Rtbj Njc The documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is complete. Inspection is possible by appointment. We accept no liability for technical data or possible errors.

Stanje: rabljeno, Technical Data PaperSpike 2 G: Manufacturer: Grumbach und Petermann GmbH Type: 2500 Year of manufacture: 2019 Dimensions of acceleration conveyor: 3,000 x 2,980 x 600 mm (L x W x H) Weight: 1,100 kg Dimensions of PaperSpike sorting unit: 2,480 x 2,982 x 1,805 mm (L x W x H) Weight: 3,100 kg Dimensions of complete PaperSpike 2G: 5,450 x 3,480 x 1,805 mm (L x W x H) Weight: 4,600 kg Dimensions of paper discharge conveyor: 3,400 x 1,200 x 650 mm (L x W x H) Weight: 400 kg Electrical equipment of the entire system: Voltage: 380 – 420 V Connected load: 9.5 kW Current consumption: 20.34 A Function principle: The material is fed onto the acceleration conveyor as dry and thin as possible, preferably as a monolayer, evenly distributed across the entire width. The sorting roller equipped with spikes picks the mixed paper from the chute; during this process, cardboard is impaled and retained by the spikes. Materials (paper) with low rigidity (newspapers, magazines, brochures, etc.) are not held by the spikes and, after the chute, fall into a paper bunker or onto a discharge conveyor. The impaled cardboards are dislodged from the sorting roller by the knock-off shaft and then drop onto the cardboard discharge conveyor or into a separate bunker. Throughput capacity: Depending on pre-sorting, material characteristics, and machine settings, each line can process between 10 and 12 tons per hour. Scope of delivery: 2 units PaperSpike 2G incl. 2 geared motors 2 units acceleration conveyor incl. geared motor 2 units paper discharge conveyor incl. geared motor (Note: The cardboard discharge conveyor is not for sale and thus not included in the scope of delivery!) Two lines are available for sale. Depending on customer requirements, either one unit or both units can be sold together. The sales price always applies per unit. Remarks: Djdpfx Aeu Tg Siog Newc The systems are expected to be dismantled by the end of October and will then be ready for loading. Complete documentation (operating instructions, CE declaration, electrical/hydraulic wiring diagrams) is available. Inspection is possible by appointment. We do not assume liability for technical data or possible errors.

Stanje: rabljeno, Technical Specifications IFE Cascade Screens (Vibrating Waste Screens): Manufacturer: IFE Aufbereitungstechnik GmbH, Austria Model: SM 2400 x 5000 F – UW30 Year of manufacture: 2009 Drive motor: 22 kW Rated current: 43 A Overall screen dimensions: 5,000 x 2,400 mm (L x W) Dimensions of individual screen segment: 950 x 800 x 130 mm (L x W x H) Screen mesh size: 150 x 125 mm Length of screening fingers (steel pipes in front of the screen segments): 400 mm Maximum stroke: 18.5 mm Weight: approx. 6,600 kg Applications: The waste screen is designed for use in facilities for sorting municipal solid waste, commercial and industrial waste, paper and cardboard, scrap metal, and electronic waste. The screen allows clog-free screening of even the most challenging materials with high throughput, prevents stringing of oversize material, enables loose discharge of oversize material over the full screen width, and eliminates downtime for screen cleaning—these are the major advantages of this system technology. Note: The screen plates / screen segments were covered over time with steel plates (not providing screening function) for use in a paper sorting plant. These steel plates are only tack-welded and can be removed again. Remarks on the overall system: Technical documentation for the machine is only available in German. Inspection of the system is possible by appointment. We do not accept any liability for the technical specifications or possible errors. Dwjdpfeu Tg Rrjx Ag Noc