Kladivni mlin

NEUE HERBOLD GMBH HM 1000/1600

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Pgjdpfx Aevwlqqsdyeg Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Leto izdelave: 1986, Stanje: dober (rabljeno), številka stroja/vozila: 2057, Hosokawa Alpine ZPS 315 Classifier Mill Pgjdpfx Adeqi Hhpeyog Universally applicable for materials up to a Mohs hardness of approximately 3.5, meeting requirements for very high final fineness with the lowest possible energy consumption. Classifier mill for fine products, cool grinding, and flexible production parameters in the particle size range below 5 µm up to 200 µm Impact mill with a top-mounted integrated Turboplex classifier for precise particle size limitation Welded construction, grinding tools made of special steel The mill is being sold complete with accessories such as: intake filter, rotary valve feeders, cyclone, filters, fan, piping, and control cabinet.

Stanje: novo, Leto izdelave: 2025, RLA 400 VIBER Performance: 11,300 m³ Capacity: approx. 11,300 m³/h Motor Power: 11 kW / 15 HP Speed: 3,000 rpm Suction Speed: 32 m/s Extraction Port Diameter: 355 mm Filter Material: Polyester Filter Permeability: 5 micron Filter Size: 160 x 935 mm Number of Filters: 58 Chip Bin Size: 500 x 500 x 600 mm – 3 units Voltage: 380 V Dimensions: 1,000 x 3,000 x 2,300 mm Weight: 630 kg Sound Level: 85 dB (disconnected) / 70 dB (connected) Pgjdpfx Adelkd Tfjysg + €850 for models with fire extinguisher (Safe System) + €1,350 for models with inverter (speed control)

Leto izdelave: 2003, Stanje: rabljeno, Bollegraf Hammermühle AS 75/850 Pgjdpfx Adeg T Id Noyeg Leto izdelave: 2003 Moč: Primernost: Prečni prerez dovoda: Rotor- Širina rotorja: 850 mm Cena: 24.500 evrov Kontaktna oseba: g. Rainer Eckerle

Leto izdelave: 2024, obratovalne ure: 10 h, Stanje: skoraj kot novo (rabljeno), Extrusion line with stuffing unit – ideal for recycling applications This robust and versatile extrusion line is optimally suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated stuffing unit, materials with low bulk density – such as regrind, EPS, film scraps, or other lightweight plastic waste – can be processed without any issues. The stuffing unit reliably compacts the loose material and feeds it directly to the extruder. This ensures consistent material intake and stable extrusion, even with challenging input materials. Pgsdpfx Adotziudjyjg Advantages: • Effortlessly processes all types of polyolefins • Ideal for light and voluminous materials such as EPS or film regrind • Efficient material feed thanks to integrated stuffing unit • Compact design, easy to maintain - Feeding extruder / melt extruder - Screw diameter: 145 mm - Drive: 45 kW - Induction heating - Stuffing unit - Hopper for material feed (Suitable for low bulk density material) - Large filter / screen changer - Strand die adapted

Leto izdelave: 2025, Stanje: novo, The LITech hammer mills HM 120 / 200 / 300 / 400 are ideally suited for the pre-crushing of medium-hard, tough, and brittle materials such as soils, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals, and many more! Pgsdpfx Adeg Ay Dheysg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 4.900 mm, skupna širina: 1.500 mm, skupna višina: 2.300 mm, skupna masa: 1.500 kg, vhodna napetost: 400 V, Cup filling and sealing machine Pgodpfx Adjv Abm Esysg Make: Food Dosing Packing Machines SP. Z.O.O. Model: PAK 5.0, Machine no.: 457 Year of manufacture: 2015 Voltage: 400 V, 3 Ph Power: 7.5 kW Air pressure: 6-8 bar Weight: 1500 kg 2-lane cup denester Dimensions: 4900 mm x 1500 mm x 2300 mm.

Stanje: novo, Stroj se odlikuje enostavnim upravljanjem, enostavnim čiščenjem in vzdrževanjem ter stabilnostjo med obratovanjem. Primeren je za obrate za predelavo mesa, restavracije, kuhinje in druge gostinske obrate. Dimenzije: 1100 × 550 × 900 mm. Električna moč: 0,75 kW. Prostornina: 150 litrov. Dobavni rok: takoj po prejetju avansnega plačila (100%). Pgjdpfjikvrtox Adysg

Leto izdelave: 2011, Stanje: skoraj kot novo (rabljeno), For sale is 1 roller conveyor, each including a geared motor: Technical Data: Psdpfsihpn Nsx Adyegg Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: Up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (further specifications see nameplate in the image) Three of the four roller tracks have a wooden sidewall along the entire length, and one roller track has a side wooden wall with a length of 5.20 m. Two of the four roller tracks are equipped with 3 lateral removal systems each. (see pictures)

Stanje: novo, Josan & Söhne ‼️NEW – NOW WITH SIEMENS TOUCH SCREEN‼️ For even easier operation and control! Leasing available directly from us! Always with linear payment plans and no inflated final installment! 36 months term: rate factor 3.0694%. 48 months: rate factor 2.3697%. 60 months: rate factor 1.9456%. German quality, CE certified, EU-compliant, and available for live demonstration. We strongly recommend buying locally from Germany: German warranty, legal certainty, fixed prices, and later German-speaking support if required. All this only with machines purchased from us. You are welcome to arrange a viewing appointment with us to inspect our quality in person. Live demonstrations available. ‼️ Our new, globally unique model – exclusively available from us in Heilbronn. Water-cooled. Exceptionally efficient, clean copper granulate (99.7% purity). We are a German company operating under German law, offering top quality with warranty and after-sales service. Our German-speaking, certified technicians (with journeyman certificates) are available to assist at any point. Our own fleet of trucks, service vehicles, and immediate assistance with expert advice. Josan Recycling: Quality at an affordable price. Inspect our machines in person – don’t rely solely on photos and videos. We process copper ourselves and demonstrate this live. S600 with water cooling and fan system – developed and assembled by us in Germany. We offer tailored solutions for small businesses, mid-sized companies, start-ups, and large enterprises. Financing, hire purchase, or leasing are all possible. Our copper granulator systems process household, industrial, and telephone cables, achieving up to 99.7% copper separation rate. PVC fractions are also efficiently separated and the plastic can be sold to recyclers for further processing. Buy local cables and produce copper – recycle with environmental responsibility and save resources. Generate copper – and thus profit – with our recycling units. Our systems also allow separation of copper-aluminum radiators: Input ➡️ copper-aluminum radiators; Output ➡️ separated copper and aluminum. Also, all iron parts and screws are removed by a magnetic belt (pre-shredder required). Become your own copper refiner (miner) – produce copper in an environmentally friendly way. Because we use our own machines for copper recycling, our equipment is continuously upgraded, designed for long life, and always under ongoing development. Maintenance, spare parts, modifications, and upgrades are smoothly handled by our trained staff! Granulation Plant S600 ➡️ For cables from 1-40mm diameter ➡️ Up to approx. 500 kg/h input – with 50% copper content, you yield 5 kg of 99.7% pure copper granulate from 10 kg input, ready for profitable resale Pgjdpfxjwyx Rzo Adyjg ➡️ Total connected load: 49 kW (excluding shredder) ➡️ Incl. separation tables ➡️ 380 Volt connection ➡️ German-implemented accident prevention (UVV) ➡️ Magnetic belt included (for steel separation) ➡️ Uncompromising quality: We use only premium Siemens components for our control cabinets ➡️ The system can be configured individually – our team will be happy to advise you Price on request Subject to errors and changes. Images and descriptions may vary.