Govor Bad Bentheim nakup rabljenega (710)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Iiodpjd Tqaljfx Aa Uja - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany Iodpfx Aajh Ek Dao Usia - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation Isdpemhh Ansfx Aa Ujia - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm Ijdpfx Aaofdkb Uo Ujia - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: - 4 shelf uprights, height 2.56 m, with 1.0 m base section usable depth (1.2 m total depth) - 12 cantilever arms with 1.0 m usable depth - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Fastening materials (bolts, nuts, and washers) (*No paint damage!) Net price for collection: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface painted in RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per upright: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright as standard (= 4 storage levels) Iedpfsguk A Hox Aa Ujia - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 in accordance with DIN standards - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable freight service with advance notice prior to delivery. The material is sensibly packed to ensure easy unloading. The installation surface must be concrete, level, suitable for anchoring, and able to bear the applied loads. The customer is responsible for checking and ensuring the surface quality, load-bearing capacity, and any necessary official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have a minimum projection of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Ijdpfsfdkbhjx Aa Usia Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever rack used: bolted system, hot-dip galvanized version Scope of supply: - 4 upright frames, height 3,000 mm with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm center-to-center spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available for larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE sections (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard Iiedpfx Aoguk Dkja Usa - Expert telephone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, load capacities are reduced according to wind and snow loads. The flooring must be concrete, even, suitable for dowelling, and capable of bearing the acting loads. Floor condition and load-bearing capacity as well as any required official permits must be checked and ensured by the customer. The upright frames must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to insurance association guidelines, it is recommended that the uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. Iodpfx Aaemhhf Sj Ueia The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Iijdpfx Aajmhhl He Uja Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack with roof supports: Hot-dip galvanized bolted system Scope of delivery: 9 rack uprights, height 4,230 mm with foot section, usable depth 1,200 mm 27 cantilever arms with usable depth 1,200 mm, with deflectors 9 roof beams with 1,500 mm cantilever, pre-drilled for customer-supplied roofing (*Without timber purlins and trapezoidal sheets for roofing) Including longitudinal and diagonal bracing for 1,500 mm upright spacing Including fasteners (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) Iiedomhhy Njpfx Aa Usa - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright 2,700 kg plus roof, wind, and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, 1,200 mm deep, with deflectors = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm upright spacing - Rack length: 12,100 mm - Including fasteners (excluding floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight shipping with prior delivery notification. The material is packed appropriately to enable easy unloading. The floor must be concrete, level, capable of being doweled, and able to bear the acting loads. The customer is responsible for checking and ensuring the floor condition, load capacity, and any necessary local permits. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to trade association guidelines, the rack uprights should protrude at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: Iiedpfx Aasmidyfs Uja - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) Iiodpfx Aajmkixwo Uoa - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Iodpfomhh Dtox Aa Usia Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard Iiodsqt Dmyspfx Aa Uja - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack, used: bolt-together system in hot-dip galvanized finish Scope of delivery: - 4 uprights, height 2,600 mm, with base 1,000 mm - 12 cantilever arms with 1,000 mm depth, standard version - Including horizontal and diagonal braces for 1,300 mm upright spacing - Incl. fastening materials (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface Iijdpfx Aaoguk Dvo Uoa - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load plates C4 according to DIN standards - Expert telephone consulting - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We provide reliable shipping with prior notice before delivery. Materials are packed sensibly for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for dowels, and able to support the applied loads. Base quality and load-bearing capacity, as well as any necessary official permits, are the customer's responsibility to check and ensure. The uprights must be anchored to the floor by the customer; anchoring to a wall is not necessary and not recommended. According to professional association guidelines, it is recommended the uprights maintain at least a 500 mm overhang to the top edge of the uprights on the highest storage level.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Fabr.Nr. 21S0218, Ponujamo rabljeni rezkalni stroj Mikron tip WF 2/3, leto izdelave neznano. Koda: ID 50285 Tip: M23 Serijska številka: 78183 Nazivna napetost: 168 V Nazivni tok: 13,6 A Nazivna moč (brez hlajenja): 2000 W Iiodeyz Ir Djpfx Aa Uja Nazivno število vrtljajev (brez hlajenja): 3000 vrt/min Način delovanja (brez hlajenja): S1 Nazivna moč (s hlajenjem): 3000 W Nazivno število vrtljajev (s hlajenjem): 3000 vrt/min Način delovanja (s hlajenjem): S1 Volumenski pretok: 10 l/s Za vprašanja ali dodatne informacije nam pišite ali nas pokličite.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Ponujamo to rabljeno stebrno vrtalno stiskalnico Wörner B 13. Proizvajalec: Wörner Tip: B 13 Št. stroja: 26050 Če imate kakršnakoli vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite. Isdpfx Aoyzpypsa Usia

Stanje: rabljeno, številka stroja/vozila: 300756, Funkcionalnost: popolnoma funkcionalen, moč: 1,5 kW (2,04 KM), nosilec vretena: MK 2, globina vrtanja: 100 mm, skupna višina: 1.745 mm, globina grla: 225 mm, širina mize: 450 mm, dolžina mize: 315 mm, skupna masa: 170 kg, leto zadnje generalne obnove: 2024, Ponujamo to rabljeno stebrno vrtalno napravo MAXION Unimax 2 S, letnik izdelave neznan. Če imate vprašanja ali potrebujete dodatne informacije, nam pišite ali nas pokličite. Iiedpfxjyzppkj Aa Uoa

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Modell 5003, nosilnost na konzolno roko: 1.500 kg, višina police: 3.585 mm, skupna dolžina: 6.200 mm, skupna širina: 1.520 mm, skupna višina: 3.985 mm, število vrst polic: 8, Konzolni regal, izvlečni, proizvajalec Lützenkirchen Iisdpfsyzn S Rsx Aa Uea

Stanje: rabljeno, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SN061856, 12-mesečna garancija Iiedsy Ar Dgopfx Aa Uja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 23.286 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.800 mm, pomik osi Y: 2.200 mm, pomik po osi Z: 800 mm, hitrost pomika os X: 35 m/min, Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu dne 21.04.2026! Znotraj Evrope lahko demontažna ekipa napravo nato neposredno pri kupcu tudi ponovno namesti (ocena stroškov: cca 20.000 EUR, cca 15 delovnih dni). 5-osno simultano rezkanje s krmiljenjem Heidenhain iTNC 530! TEHNIČNE PODROBNOSTI Pomik X-os: 2.800 mm Pomik Y-os: 2.200 mm Pomik Z-os: 800 mm Delovni podaji: 35.000 mm/min Iisdpfoyzrvtex Aa Uja PODROBNOSTI STROJA Proizvajalec krmiljenja: Heidenhain iTNC 530 Magazin za orodja: 40 mest Električni podatki Napajalna napetost: 400 V AC Frekvenca: 50 Hz Poraba toka: 116 A Skupna inštalirana moč: 69 kW Obratovalne ure Obratovanje programa: 23.286 h Obratovalne ure stroja: 51.450 h Obratovalne ure krmiljenja: 70.739 h OPREMA Merilna tipala Opomba: Dodatne tehnične podatke o stroju najdete v priloženem podatkovnem listu.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 3.275 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.100 mm, pomik osi Y: 600 mm, pomik po osi Z: 510 mm, obremenitev mize: 1.000 kg, največja hitrost vrtenja: 12.000 obr/min, Oddaja ponudbe zavezuje k pravočasnemu prevzemu dne 21.04.2026! Stroj z le 3.275 urami vretena! TEHNIČNI PODATKI Pomik X-os: 1.100 mm Pomik Y-os: 600 mm Pomik Z-os: 510 mm Velikost mize: 1.300 x 600 mm T-utori: 6 (velikost 18) Največja obremenitev mize: 1.000 kg Območje vrtljajev: 60 – 12.000 min⁻¹ Pogonska moč: 10 / 17 kW Vpenjalno vreteno: ISO 40 / DIN 69871A Magazin: 32 mest PODROBNOSTI O STROJU Iisdpfx Aeyzhnfoa Uea Pogonska moč: 10 / 17 kW Notranje hlajenje (IKZ): 20 bar Volumen rezervoarja hladilne tekočine: 480 l Ure vretena: 3.275 h Obratovalne ure stroja: 15.883 h Obratovalne ure krmiljenja: 17.706 h

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, hitrost vretena (min.): 250 obr/min, največja hitrost vretena: 2.500 obr/min, skupna višina: 1.600 mm, skupna širina: 1.200 mm, skupna dolžina: 1.450 mm, hitrost dviga: 130 mm/s, premer honanja: 50 mm, skupna masa: 830 kg, hod: 160 mm, moč: 0,75 kW (1,02 KM), Ta enostavna za uporabo ročna honalna stroj se odlikuje po visoki stabilnosti in natančnosti ter se lahko s pomočjo brezstopenjske elektronske regulacije hitrosti prilagodi. Premer honanja je od 3 mm do 50 mm, do dolžine 160 mm. Enostavna za uporabo in regulacijo. Zaradi majhnega potrebnega prostora je zelo prilagodljiva za postavitev. Ijdpfxow Upzxo Aa Usia

Stanje: zelo dobro (rabljeno), Odsesavanje čistega zraka HÖCKER-POLYTECHNIK Vacumobil VT 300 - rabljeno Filtracija zraka preko filtrskih cevi, mehansko čiščenje, potrjeno testiranje na prah, premična zbiralna posoda, vključno z avtomatskim protipožarnim sistemom ----- Tehnični podatki ----- Premer sesalne šobe: 300 mm, Nazivni volumenski pretok: 5.100 m³/h, Filtrska površina: 28 m², Skupna prostornina zbiralnika za ostružke: 495 litrov, Število vreč: 4 kosi, Iiodpfx Asy Dqc Dea Usa Motor: 7,5 kW, Dimenzije (D x Š x V): 3.100 x 1.050 x 2.500 mm, Teža: 900 kg, Raven zvočnega tlaka: 75 dB Kvalitativne informacije: - popolna osnovna inšpekcija - popolno osnovno čiščenje - električne inštalacije preverjene - takoj pripravljeno za uporabo

Stanje: rabljeno, Vijačni kompresor SCHNEIDER AM B7,5 10 - rabljeno - ----- Tehnični podatki ----- Največji tlak: 10 bar, Motor: 7,5 kW, Pretok zraka pri 10 bar: 1.000 l/min, Teža: 250 kg, Obratovalne ure: 6.922 h, Ure pod obremenitvijo: 2.083 h, Iodpoy Dp Swsfx Aa Ueia Leto izdelave: 2017