Hon stroj SHM - Ročni hon stroj

Honmaster SHM

Stanje: rabljeno, Leto izdelave: 1977, Tehnične podrobnosti: Premer honanja: 125 mm Hod: 500 mm Izlet: - mm Hitrost brusilnega vretena: 26-1200 (12 stopenj) vrt/min Min. premer honanja: 30 mm Maks. premer honanja: 165 mm Pomik mize: 800/150 (maks.) mm Vpenjalna površina mize: 500 x 1000 cm Skupna priključna moč: 4,22 kW Teža stroja pribl.: 0,15 t Dimenzije stroja (D x Š x V) pribl.: 1,30 x 1,20 x 2,70 m Obstaja premična miza, ki se premika v vzdolžni in prečni smeri Klsdpfew Rv Tasx Af Njl Ročno mazanje s hlajenjem Stroj je namenjen honanju Nihajno gibanje v hitrem pomiku možno med dvema nastavljivima koncema

Leto izdelave: 2022, obratovalne ure: 0 h, Stanje: novo, Mobile cleaning centrifuge including buffer tank for waste water, agitator, and double-diaphragm air-operated pump. - New machine - Numerous other variants and special configurations available upon request Machine type: Process water centrifuge solid-liquid separation Kljdpfxjf Sqfqs Af Nel Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: Mass finishing technology, general solid-liquid separation, cooling lubricant treatment, wet blasting systems, ... Advantages: - High discharge performance thanks to acceleration forces of more than 1,800 times gravity acting within the system - Process water is recirculated, minimizing operating costs and protecting the environment - Savings on costly additives for the mass finishing process (compound) - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70°C (optional cooling available) - Frequency-controlled motor drive for smooth acceleration and deceleration of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the fields of mass finishing, drying, and process water technology, custom-tailored to your application. From development through to production: We supply all our products from a single source, and everything is "Made in Germany." ----- Simply contact us — we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal). We will first provide you with a non-binding offer, which will also inform you about our general terms and conditions, cancellation rights, and legal notice before any purchase/contract is concluded.

Stanje: zelo dobro (rabljeno), Bore diameter: 1.5 - 165 mm Stroke: 80 - 160 mm Spindle speeds: 200 - 2500 rpm Stroke speed - under load: 80 - 310 strokes/min Total power requirement: 0.9 kW Machine weight: approx. 0.6 t Required space: approx. 1.2 x 1.0 x 1.6 m Precision cross-honing machine with automatic measuring control Kedpfx Afowva Rns Njll Includes: Tool holders, small measuring table, digital dial gauge, tool accessories,

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), A 3-axis precision milling machine, DMG Mori, is available. Travel path X/Y/Z: 200mm/200mm/190mm, spindle speed: 40,000 rpm, feed rate: 30 m/min, accuracy: 0.001mm. Machine dimensions (X/Y/Z): approx. 1800mm/1550mm/1850mm, weight: approx. 2,200kg, control unit: Siemens 840D, operating hours: 4,979h, spindle hours: 1,041h. The spindle was completely overhauled in 2023. An on-site inspection is possible. Kedpfx Afsvi N D Ss Nsll

Stanje: rabljeno, Leto izdelave: 1986, Grinding diameter: 350 mm Grinding length: 600 mm Center height: 175 mm Very well-maintained machine. The machine comes from a precision grinding workshop in the Black Forest. It can still be inspected under power at the seller’s site for a short time. In 2022, the machine underwent partial overhaul and maintenance at our facility, including geometry restoration according to the manufacturer’s protocol. Equipment: - 2-axis FAGOR digital readout - Sine bar - Tailstock with fine adjustment - Hydraulic tailstock - Face grinding attachment Kljdpfx Afev Tqqne Nol - Internal grinding attachment - Internal grinding spindle Fischer UJ70 - Paper band filter - Automatic cycle: roughing – finishing – spark out – return

Stanje: rabljeno, Leto izdelave: 1998, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 425 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t G E I B E L & H O T Z CNC cycle-controlled precision surface grinding machine Klsdpfxot Hxamj Af Nel Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Max. grinding length (table longitudinal travel 900 mm): 800 mm Max. grinding width (cross travel 500 mm): 500 mm Max. grinding height under wheel: approx. 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total drive approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: • Easy-to-program GEIBEL & HOTZ grinding cycle control • Model SL with standard grinding programs including surface and multi-surface grinding with roughing, finishing, spark-out, return, plunge grinding, dressing automation with compensation, loading station stop – all inputs/parameters via operator panel and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronics and SIEMENS OP 25 • Table movement via roller ring screw drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical axes driven by ball screw • Diamond dresser on the left side of the table next to the magnetic plate, with automatic dressing cycle, compensation, pull-back, and edge rounding on grinding wheels possible • MPM balancing device for grinding wheel • Mounted permanent electromagnet chuck approx. 800 x 500 mm, fine-pole • Wet grinding system with separate band filter coolant filtration • Complete enclosure with electrically monitored sliding doors • Separate control cabinet, work lamp, various accessories, operation manuals Condition: Good to very good! The wide grinding wheel is suitable for large-area stock removal! Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 250 h, Lapping stroj Stähli FLM 750 Proizvajalec: Stähli Läpp Technik AG Tip: FLM 750 Leto izdelave: 2013 Napetost/Frekvenca: 3x400V + N + PE / 50Hz Poraba moči: 11,5 kW Maksimalni tok: 25 A Teža: 2500 kg Premer rotacijskega stola: 750 mm Notranji premer izravnalnega obroča: 300 mm Hitrost vrtenja: 6–75 obr/min Pogon moči: 4,0 kW Pnevmatični cilindri: 3 kosi Dovod stisnjenega zraka: 6–10 bar Dimenzije: 1700 x 1250 x 2200 mm Raven hrupa: Kedpfoxpnnxox Af Nsll

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, moč: 8,09 kW (11,00 KM), vrsta goriva: dizel, skupna masa: 950 kg, Leto izdelave: 2024, obratovalne ure: 1 h, Our offer also includes the larger mini excavator YAMA H12 with an operating weight of 1,200 kg, equipped with a 3-cylinder YANMAR engine as well as an oil cooler – Price: €10,504 net. The YAMA H12 K model with cabin, also featuring a 3-cylinder YANMAR engine, is also available – Price: €12,000 net. The YAMA H10 model is the ideal equipment for demanding construction, electrical, plumbing, renovation, and service companies in related sectors. The YAMA H10 model is additionally equipped with a swing arm, which greatly facilitates work in confined spaces. We also guarantee after-warranty servicing. The mini excavators are manufactured based on and under the supervision of European engineers. The equipment is robustly constructed and can operate under all conditions. MAIN PARAMETERS: - Model: TW10 - Operating weight: 950 kg - Bucket capacity (3 buckets included): 0.025 m3 - Engine model: KOOP - Engine power: 11 HP / 2,500 rpm Ksdpfjvz T H Iex Af Njll - Number of cylinders: 1 - Oil cooler: NO - Swing arm: YES - Gradeability: 30° - Gear pump - Pressure: 16 MPa - Flow rate: 18 l/min - Maximum speed: 2 km/h - Slew speed: 10 rpm - Bucket breakout force: 9.4 kN - Arm digging force: 5.8 kN DIMENSIONS: - Transport length: 2,870 mm - Width: 930 mm - Height (with/without canopy): 2,285 / 2,030 mm - Dozer blade width: 937 mm - Dozer blade height: 210 mm - Track gauge: 746 mm - Track width: 180 mm - Ground clearance: 405 mm - Standard bucket width: 380 mm WORKING RANGE: - Digging height: 2,500 mm - Dumping height: 1,750 mm - Digging depth: 1,730 mm - Maximum vertical digging depth: 1,655 mm - Digging radius: 3,030 mm - Minimum turning radius: 1,490 mm - Digging radius at ground: 2,940 mm - Max raised blade height: 170 mm - Blade down depth: 240 mm PRICE: €7,303 net €8,690 gross - INCLUDES 3 digging buckets (300, 500, 800) - For machines regularly serviced by us, we EXTEND the WARRANTY to TWO YEARS - FREE 12-month WARRANTY – after this period, we supply all original spare parts upon request! - FREE delivery within a radius of 200 km - Sale WITHOUT VAT possible (with valid VAT ID only) - FINANCING available - We are always at your service! KINGWAY DEUTSCHLAND is the sole authorized distributor of the Kingway brand in Germany. Only here can you inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a huge selection in stock, with around 70 machines available at any time. We supply machines across Germany, Austria, Switzerland, Italy, and other neighboring countries, and provide access to all spare parts for our customers. Book an appointment and come for a test drive!

Stanje: rabljeno, Leto izdelave: 2011, Rabljeni stroj Leto izdelave: 2011 Stanje: stroj popolnoma obnovljen in servisiran Oprema in tehnični podatki: Kjdpfx Aowka N Tjf Njll Brezstopenjska hitrost podajanja 10–18 m/min Krmiljenje Edge Control 19 z 18,5" barvnim zaslonom na dotik Agregat za dodajoče rezkanje Podajanje robnih trakov Postaja za nanašanje lepila, kartuša, tipalna šoba z avtomatsko nastavitvijo višine lepila Tiskalna enota Agregat za krajšanje Večnamenski rezkalni agregat Kopirni rezkalni agregat Agregat za obla robove Ravna rezkalna rezila Polirna enota Debelina obdelovanca 6 - 60 mm Debelina robnega traku 0,4 - 8 mm Minimalna širina obdelovanca 60 mm Najkrajša dolžina obdelovanca 180 mm Dimenzije: 5300x1500x1600 mm Teža: 2200 kg Lokacija: 65439 Flörsheim Razpoložljivost: na kratki rok

Leto izdelave: 1992, Stanje: rabljeno, Grinding height 50 mm Grinding width 120 mm Grinding wheel diameter 600 mm Total power requirement 85 kW Machine weight approx. 9500 kg D I S K U S CNC-controlled, vertical double-sided surface grinding machine with rotating workpiece infeed and IONIC measurement control. Type: DDS 600 III PRM - CNC Year of manufacture: 1992, No. 7924 --- Grinding wheel dimensions (each): 600 x 150 x 75 mm (H) Workpiece data: Grinding height approx. 1.5 – 50 mm Grinding width approx. 20 – 120 mm Vertical quill adjustment, each approx. 150 mm Infeed increment of grinding wheels via CNC: 0.0001 mm Workpiece transport device, continuously adjustable feed: 40 – 235 mm/sec Grinding wheel speed (each, 30 m/s): 191–955 rpm Grinding spindle drive, infinitely variable (each): 37 kW Total drive power approx. 85 kW / 380 V / 50 Hz Weight approx. 9,500 kg Accessories / Special Features • SIEMENS CNC control SINUMERIK 810 G with display for 4 axes (top and bottom infeed, dresser, and workpiece rotation), direct input of all grinding parameters, and • IONIC measurement control no. 17 A with 2 measuring probes for scanning the workpieces after the grinding cycle, triggers automatic infeed corrections for the grinding wheels; real-time measurement data on monitor for statistics, workpiece counting, etc. • Digital display of current (amperage) of the drive motors and grinding wheel speed Klodpfx Afet Hw Naj Nol • Gantry construction for increased stability and improved grinding accuracy • Rotary workpiece transport with continuously variable speed control as 4th axis • Position control system for monitoring the height position of the lower grinding wheel • 2 adjustable workpiece hold-downs each at the infeed and outfeed, with height monitoring, simple raw part stacking mechanism, finished parts removal via conveyor belt • Half-inclined, side-mounted grinding wheel dressing device with preprogrammable dressing cycles, integrated as CNC axis in the control system with safety shut-off • Large separate electrical cabinet, automatic central lubrication, high-performance pneumatic system • Large PROMATEC (F) coolant system with filtration unit and magnetic separator • Various grinding wheels, flanges, various table segments, transport discs, large dust extraction system, etc. This machine is particularly suitable for simultaneous, parallel surface grinding of workpieces in large series, such as punched parts, piston rings, hydraulic components, etc. Condition: good to very good – soon available for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice This offers a very rare opportunity in terms of both condition and price. If you require another grinding machine, especially from the manufacturer DISKUS, please send us your inquiry.