Gbs nakup rabljenega (359)

Stanje: rabljeno, prevoženi kilometri: 400.209 km, moč: 427 kW (580,56 KM), prva registracija: 02/2020, vrsta goriva: dizel, velikost pnevmatike: 385/65R22.5, konfiguracija osi: 6x2, medosna razdalja: 3.150 mm, gorivo: dizel, zavore: retarder, barva: rdeča, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, Leto izdelave: 2020, Oprema: ABS, AdBlue, asistent za ohranjanje voznega pasu, centralno zaklepanje, električno upravljanje oken, greljenje sedeža, hladilnik, klimatska naprava, nadzor oprijema, parkirni grelec, retarder, spojler, tempomat, zapora diferenciala, = Additional Options and Equipment = - Adaptive cruise control - Alarm system - Roof spoiler - Differential lock Tsdpfswvg Imox Abgof - Double glazing - Remote central locking - Leather interior - Lift axle - Engine brake - Hub reduction - PTO (Power Take-Off) - Radio - Reversing camera - Disc brakes - Sun visor - Spotlights - Lane departure warning system - Auxiliary heater (Parking heater) = Remarks = 315 cm wheelbase. 80,000 kg GCW (Gross Combination Weight). Adjustable fifth wheel. Coupling height: 120 cm. Full air suspension. Retarder. Hydraulic system. Engine PTO. Custom interior. = Further Information = Technical Information Number of cylinders: 8 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Steered; Tyre tread left: 20%; Tyre tread right: 20% Rear axle 1: Tire size: 315/80R22.5; Double tires; Tyre tread left inner: 10%; Tyre tread left outer: 10%; Tyre tread right inner: 10%; Tyre tread right outer: 10% Rear axle 2: Tire size: 315/70R22.5; Tyre tread left: 10%; Tyre tread right: 10% Weights Unladen weight: 10,890 kg Payload: 15,110 kg Gross vehicle weight: 26,000 kg Interior Upholstery: Leather Identification Model number: R580 V8 XT / 6x2 BOOGIE / RETARD = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po russki. We strive to provide accurate information, but no rights may be derived from the information provided.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 10 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 230 V, Oprema: dokumentacija / priročnik, We are selling our 3D handheld scanner system with photogrammetry module for 0.05 mm measurement accuracy. We have used the system for precise measurement of welded components, and it works perfectly. However, since we will no longer be manufacturing these welded parts in the future, we are offering it for sale. The system can be inspected and tested at our facility. We also offer user training upon request. Sales price is net plus 19% VAT. An official invoice will be provided. Details about our 3D measurement system: Artec Leo 3D scanner • Year of purchase: 2022 • Condition: Excellent, well-maintained • Application: High-precision, mobile 3D measurement without external hardware (integrated battery, touch display, wireless operation) Technical information: • 3D resolution with handheld scanner up to 0.2 mm • Accuracy with handheld scanner up to 0.1 mm (base unit) • Additional photogrammetry module: Increases system accuracy up to 0.05 mm per meter (!!) • High-quality color capture • Integrated battery for up to 3.5 hours of operation • On-device data processing • incl. temperature compensation • incl. calibration kit • incl. calibration certificate Included additional components: Tsdoxpq Syspfx Abgsf • High-performance XMG PRO laptop (late 2021) - Processor: Intel® Core™ i7-11800H (11th Gen) 2.30 GHz - RAM: 64 GB - Storage: 932 GB SSD - Graphics: 8 GB (dedicated GPU) - OS: Windows 11 Pro (64-bit) • incl. Artec Studio 18 software (lifetime license) • Practical transport case for scanner and tripod ScanReference • SCANREFERENCE photogrammetry system to boost scan accuracy to 0.05mm/m • Includes camera, reference object, marker set, and software Accessory kit: • Practical transport case for scanner and tripod • LEO backup battery • 1000 magnetic targets • Self-dissolving scan spray Available for inspection and testing at: ASM Dimatec Deutschland GmbH Lehmkuhlenfeld 2 38444 Wolfsburg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Allgemeine Daten Abmessungen Breite: 3120 mm Abmessungen Tiefe: 2505 mm Abmessungen Höhe: 4125 mm Maschinengewicht: 5530 kg Hauptantrieb Anzahl Achsen: 3 Tsdpfx Abjxc Rbhegef Verfahrwege X-Achse: 1500 mm Y-Achse: 2000 mm Z-Achse: 1200 mm Tisch Tischbelastung: 4500 kg Zusätzliche Ausstattung 3-Achsen CNC-Steuerung, Pantec SP25/SP600 Schnittstelle, EAGLE PAD Joystick (6,5 m) Renishaw PH10M (720 Positionen, 7,5°) + PHC10-2 Steuergerät Renishaw SP25M Komplettsatz: SM25-1/-2/-3 (mit SH25-1/-2/-3), TM25-20 Adapter; zusätzlich SM25-4 (mit SH25-4) & SM25-5 (mit SH25-5) Umfangreiche M2/M3 Tastsystem-Sätze (Ø 0,3–30 mm, Verlängerungen), M2↔M3 / M3↔M2 Adapter FCR25 + FCR25-TC (3+3-fach-Wechsler, temperaturgeregelt) mit MRS1000/MRS600 Schienensystem Ø 30 mm Referenzkugel INCA3D Premium (DCC): Formabweichung, Path Wizard, Simulation, Statistik, Excelberichte, grafische Programmierung, CAD-Import IGES/STEP, Master Scan Funktion + Assist SP25, FCR25-Unterstützung, USB-Dongles (HASPHL) Industrie-PC (z. B. Intel i5, 8 GB RAM, 256 GB SSD, 22″ Monitor, Windows 10) + Farblaserdrucker Diese 3-Achsen Mora Primus 152012 wurde 2019 gefertigt. Sie verfügt über einen großen Messbereich mit X-Achse 1500 mm, Y-Achse 2000 mm und Z-Achse 1200 mm. Die maximale Tischbelastung beträgt 4500 kg und gewährleistet ein robustes Arbeiten für unterschiedliche Einsätze. Mit einer Vector-Geschwindigkeit von bis zu 519 mm/s ist ein effizienter Betrieb möglich. Wenn Sie eine hochpräzise Messmaschine suchen, empfehlen wir die zum Verkauf stehende Mora Primus 152012. Kontaktieren Sie uns gerne für weitere Informationen. Anwendungsbereiche Messen

Stanje: novo, Leto izdelave: 2025, Markierheld EXCLUSIVE XL Industry 4.0 – Model 2025 Metals, plastics, and much more! • EZCAD 3 (true 64-bit card) with up to 4 axes • Suitable for Windows Professional 64-bit • Professional JPT MOPA fiber laser source with 20 watts power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color annealing marking) • DigiScan Eco 10 scanner unit for high accuracy and detail • T-slot plate by Isel for easy clamping and positioning of your workpiece • Front sliding door with large viewing window and certified laser safety glass made in Germany, including monitoring system -> Door opening: 450 mm • Left-side sliding door including monitoring for long parts -> Door opening: 400 mm • Clear control panel with Siemens pushbuttons • Marking area approx. 100 x 100 mm (optional 150/200/300 mm) • Motorized height adjustment with focus finder • Free-standing housing made of aluminum profiles with two manual doors for simple, user-friendly, and safe marking. Laser Class 1 • Base of the housing with Rittal control cabinet and integrated exhaust mounting area • LED work area lighting made in Germany • High-performance mini PC with 32 GB RAM • 21” TFT touch screen for fatigue-free operation • Professional marking software in German • Barcode and QR-code support • Serial number function • Batch scanning from Excel file, network, or database! • Laser parameter finder using matrix over two parameters (e.g., frequency to speed, frequency to power) • TCP/IP connectivity. Various commands can now be sent to the software via the TCP protocol. This allows seamless integration of external components such as camera position recognition, etc. • Industry 4.0: Machine status can be processed anytime via TCP/IP protocol • Inputs and outputs for automation • 3D preview for rotary axis processing • Performance boost up to 50% thanks to 64-bit technology • Enhanced stability • Optionally control up to 4 axes WITHOUT switching via PLUG-ins • Optional DEEP engraving (slicer software for Z-axis control) • Increased engraving speed for hatchings due to new algorithms • Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus position check • Connection port for external extraction system • Software compatible with Windows 10 • USB cable for computer connection • Operating manual and user software in German Tsdpfjwga Etox Abgsf Available options include: → IPG or SPI fiber laser sources with various power levels → Scanlab equipment → Suitable extraction systems → Automation for part loading, conveyor belts, and much more! → 3D marking functionality → Automatic focus adjustment via specialized laser sensor → Rotary unit in various designs → Motorized slides in X and Y axes → Interlock system for marking WITHOUT safety housing, using only personal protective equipment for bulky parts Training included in Schweinfurt! Our engraving lasers are manufactured at our facility in Schweinfurt! Custom requirements can be accommodated at any time! → Made in Schweinfurt Photos may show optional features. We are your partner for laser markers—whether manual or automated laser marking systems. We would be happy to provide you with a quote.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 610 mm, pomik osi Y: 406 mm, pomik po osi Z: 406 mm, teža obdelovanca (maks.): 200 kg, širina mize: 500 mm, hitrost vretena (min.): 10.000 obr/min, Oprema: transportni trak za ostružke, For sale: HAAS UMC-500 5-Axis Universal Machining Centre Condition: Brand new machine. Only one test workpiece was produced. The unit has been unused and stored for 2 years. Main Technical Specifications Travels: X axis: 610 mm Y axis: 406 mm Z axis: 406 mm Table: Diameter: 500 mm Tsdpfx Abjxg Nd Nogef Maximum workpiece weight: 200 kg 5-axis rotary/trunnion table Spindle: Inline direct-drive 10,000 rpm 30 hp (22.4 kW) 40 taper (40T) Through-spindle coolant: 300 psi (21 bar) Tool Changer: 30 tool stations Side-mount, high-speed Accuracy and Compensation: Thermal compensation DWO/TCPC – dynamic work offsets and tool center point control Rigid tapping Equipment and Features: Haas NGC CNC control (compatible with FANUC) 1 GB memory Ethernet interface, WiFi connectivity USB port, 15” colour LCD display Early power-failure detection module Memory lock (keyswitch) Spindle cooling system Fully enclosed guarding with doors Lighting Centralised lubrication system Top cover Measurement and Calibration Equipment: Renishaw WIPS wireless intuitive probing system (Haas Visual Programming System, macros, spindle orientation, coordinate rotation & scaling) Rotary-Axis calibration tool RJH remote control pendant with colour display Chip and Coolant Systems: Coolant tank – 95 gallons (360 L) Initial fill with Blaser coolant emulsion Chip conveyor – belt type (CONVEYOR-H) High-pressure air system Documentation: Original machine documentation (in English) Application: The Haas UMC-500 is a compact yet powerful universal 5-axis machining centre designed for complex, multi-sided, and freeform surface part manufacturing. Suitable for simultaneous 5-axis machining and 3+2 technology, significantly reducing setup operations and ensuring high accuracy. If you have any further questions, please do not hesitate to contact us.

Stanje: rabljeno, prevoženi kilometri: 198.740 km, moč: 140 kW (190,35 KM), vrsta goriva: dizel, vrsta prenosa: samodejen, konfiguracija osi: 4x2, medosna razdalja: 3.200 mm, prva registracija: 03/2017, dolžina tovornega prostora: 2.830 mm, višina nakladalnega prostora: 1.390 mm, prostornina tovornega prostora: 6 m³, kapaciteta rezervoarja za gorivo: 72 l, Izpusti CO₂: 153 g/km, emisijski razred: Euro 6, barva: rjava, število sedežev: 5, število prejšnjih lastnikov: 1, Leto izdelave: 2017, Oprema: ABS, airbag, centralno zaklepanje, drsna vrata, elektronski program stabilnosti (ESP), greljenje sedeža, klimatska naprava, nadzor oprijema, navigacijski sistem, sistem za imobilizacijo, tempomat, = Additional Options and Equipment = - Assistance Package (Lane Keeping Sensor, Blind Spot Monitoring) - LED Headlights - Alloy Wheels (18") - Metallic Paint - Left Side Sliding Door - Right Side Sliding Door - Body-Coloured Bumpers - Alarm System Class I - Audio Package (Bluetooth Hands-Free Preparation, Multimedia Preparation, Radio) - Automatic Dimming Headlights - Heated Exterior Mirrors - Front Passenger Airbag - Roof Rails - Electric Front Windows - Electrically Adjustable Exterior Mirrors - Electronic Brakeforce Distribution - Driver Airbag - Remote Central Locking - Interior Package (Front Seat Heating, Leather Steering Wheel) - Tailgate - Front and Rear Curtain Airbags - Light and Sight Package (Adaptive Cornering Light, Illuminated Exterior Mirrors, LED Rear Lights) - Multifunction Steering Wheel - Navigation Package (Bluetooth Hands-Free Preparation, Multimedia Preparation, Radio) - Park Package (Park Assist, Reversing Camera) - Rain Sensor - Tyre Pressure Monitoring System - Start/Stop System - Immobiliser - Adjustable Steering Wheel - Bulkhead Partition = Further Information = General Information Number of doors: 5 Model range: 2014 - 2024 Cab: Double cabin Technical Information Torque: 440 Nm Number of cylinders: 4 Engine displacement: 2,143 cc Transmission: 7-speed automatic Acceleration (0–100): 9.0 s Max. speed: 206 km/h Dimensions Length/Height: L2H1 Width: 193 cm Weights Unladen weight: 2,110 kg Payload: 990 kg gross vehicle weight (GVW): 3,100 kg Maximum trailer load: 2,500 kg (unbraked 750 kg) Environment CO₂ emissions (NEDC): 153 g/km Particulate emissions: 0.5 mg/km Fuel Consumption Average fuel consumption: 5.8 l/100km Urban fuel consumption: 6.7 l/100km Extra-urban fuel consumption: 5.3 l/100km Condition Number of keys: 2 (2 remote controls) Tsdpsxq Evpjfx Abgjf Product Safety EU representative: Mercedes-Benz Nederland B.V. P.O. Box 2088, 3500 GB Utrecht, NL

Stanje: rabljeno, prevoženi kilometri: 471.628 km, moč: 500 kW (679,81 KM), prva registracija: 05/2009, vrsta goriva: dizel, barva: zelen, konfiguracija osi: 8x4, velikost pnevmatike: 385/65R22.5, gorivo: dizel, medosna razdalja: 4.050 mm, zavore: retarder, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, Leto izdelave: 2009, Oprema: ABS, klimatska naprava, nadzor oprijema, parkirni grelec, retarder, tempomat, zapora diferenciala, = Additional Options and Equipment = - AdBlue system - Differential lock - Electric windows - Refrigerator - Leather interior - Air suspension - Engine brake - Hub reduction - PTO - Radio - Seat heating - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = MAN TGX 41-680 8x4/4 BLS GCW: 250,000 kg WSK Spring suspension on front axle Air suspension on rear axle Retarder Hub reduction 3.5" adjustable fifth wheel Hydraulics = Additional Information = Technical Information Number of cylinders: 8 Drivetrain AdBlue system: Yes Axle Configuration Front axle 1: Tyre size: 385/65R22.5; Steering; Tyre tread left: 40%; Tyre tread right: 40%; Brakes: disc brakes; Suspension: leaf spring Front axle 2: Tyre size: 385/65R22.5; Steering; Tyre tread left: 70%; Tyre tread right: 40%; Brakes: disc brakes; Suspension: air suspension Rear axle 3: Tyre size: 315/80R22.5; Twin tyres; Tyre tread left inside: 60%; Tyre tread left outside: 60%; Tyre tread right inside: 40%; Tyre tread right outside: 40%; Brakes: drum brakes; Suspension: air suspension Rear axle 4: Tyre size: 315/80R22.5; Twin tyres; Tyre tread left inside: 40%; Tyre tread left outside: 40%; Tyre tread right inside: 40%; Tyre tread right outside: 40%; Brakes: drum brakes; Suspension: air suspension Dimensions Dimensions (L x W x H): 795 x 255 x 400 cm Weights Unladen weight: 13,880 kg Payload: 27,120 kg Gross vehicle weight: 41,000 kg Interior Upholstery: Leather Maintenance MOT (General Inspection): valid until 06/2026 Identification Type number: TGX 41.680 8x4 BLS / WSK / 250.0 = Company Information = Todpoxr Tuijfx Abgef ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen NL-DE-GB), Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We strive to provide correct information, however, no rights can be derived from the published texts.

Stanje: rabljeno, Leto izdelave: 2012, Used machine Year of manufacture: 2012 Base machine - Dynestic 7521 20.6 Dynestic table For classic nesting processing with wear plate Working length: 6250 mm (DYNESTIC 20.6 includes additional 4th stop in Y) Machine frame in welded construction with ground and hardened prism guides for the gantry, aggregate head, and consoles Gantry design for the moving column Helical rack-and-pinion drive in X and Y directions, ball screw drive in Z direction for precise positioning Technical data: Refer to the technical specifications for the DYNESTIC 7521 - 20.6. Please consult the relevant data sheets. Processing dimensions: Max. workpiece size for edge trimming: X = 6250 mm Y = 2100 mm Max. travel paths: X = 7360 mm Y = 2720 mm Z = 325 mm Max. bridge clearance, Dynestic table: Z = 1st level 318 mm / 2nd level 418 mm (from tabletop, without tool, without holder) Maximum programmable speed: Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage: 400 V, 50/60 Hz CONTROL SYSTEM: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network port 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for transmission of control and program data. Data transfer via high-speed internet connection Requirement: High-speed internet access at the machine. DYNESTIC Table Solid, continuous processing table with grid partitioning, continuous grooves in X and Y directions, groove spacing 50 mm with 25 meters of sealing cord for clamping the wear plate 1 processing field with stop rails/stops, height 30 mm, pneumatically retractable 2 stop rails in Y direction and 1 stop in X direction on the right (seen from the machine front) Vacuum zones Single-circuit vacuum system Drilling unit 7976, 24 spindles Drive power: 3.0 kW Tedpjw I U Ecjfx Abgof 18 vertical spindles, individually selectable, arranged in L-shape: 10 in X and 8 in Y direction 32 mm pitch Max. drill bit diameter: 35 mm Drill overall length: 70 mm from mounting end (depending on panel thickness) Spindle stroke: 70 mm Rotation direction: Alternating CW/CCW n(max.) 1000 - 5710 rpm steplessly adjustable Mount: M10 thread - 11 mm fit (no tool, no holder) 6 horizontal spindles 2 double-drilling spindles in X direction (32 mm distance between 1st and 2nd horizontal spindle) 1 double-drilling spindle in Y direction Mount: M10 thread, 11 mm fit Max. drill overall length: 70 mm from mounting end (no tool, no holder) Free space 1 for: Optional double drilling spindle in X direction or Vertical adapter with double feed power Free space 2 for: Optional saw in X direction or Vertical adapter with double feed power Milling unit 7831, 2-stage Power: 11.0 kW (S6) n(max.) = 1000 - 24000 rpm steplessly adjustable, two-stage feed stroke Max. power at 12000 - 24000 rpm air-cooled with HSK-F 63 tool holder with right-

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NT315HF0043, Control MSX-711 (Fanuc 3Li) for 5-axis simultaneous machining Spindle nose A2-5, 40-position ATC, Capto C5 type Bar feeder LNS MoveS2 INVENTORY NO. 2180207, MACHINE EQUIPPED WITH: MSX-711 (FANUC 3Li) control system for 5-axis simultaneous machining; 15’’ color display and MAPPS III dialogue system Storage capacity for up to 1000 programs Options: Tool offsets (milling spindle), B-axis tool life management, G10 tool offset input, 3-axis interpolation, variable thread pitch (G34), circular threading, customized macros, high-precision path control, ATA 1 card, projected tool for 5-axis machining Chip conveyor, chain model/500 B-axis with direct drive motor (DDS) Tool changer, Capto C5 type, 40 positions Tool presetting system with automatic arm to the milling spindle High-pressure coolant unit, KNOLL type, with 500 L tank, pump and paper filter, through-spindle coolant supply Cutting fluid cooling unit, KNOLL type Linear scale measurement system for axes X1 / Y / Z1 Tool monitoring system via main spindle and drive motor performance analysis Automatic tool measurement system with RENISHAW probe and macro B for use with the milling spindle Signal light Automatic machine stop Workpiece catcher tray D52mm, L120mm 10 additional M functions Flange for cylinder, thread ring, drive tube, bore Ø 52 HAINBUCH Spanntop Axzug Nova chuck with stop, type 100, for workpieces in the chuck and for bar work, clamping head type 32, direct A2-5 mounting, adapter KITAGAWA hydraulic chuck, type BB206A5, Ø170mm, direct A2-5 mounting, bore Ø52mm Bar feeder LNS, type Move S2 Round bar diameter: Ø8 – 80 mm, bar length: 700 mm – 1600 mm; front loading; longitudinal adjustment: 470 mm; set of guides Ø18-20, Ø24-26, and Ø28-30 mm; pushers 1x Ø8 – 1x Ø15 mm; guide bushes for main spindle Ø 21 – 26 and 31 mm Tsdpfxod Hkucj Abgsf Fire extinguishing system (CO2), Tyco KLA III type with 10 kg CO2 Extraction system ELBARON RON/A 3000 D-2H with complete support.

Stanje: novo, Leto izdelave: 2025, Markierheld EXCLUSIVE XL Industry 4.0 – Model 2025 Metals – plastics and much more! • EZCAD 3 (true 64bit card) supporting up to 4 axes Todowgaqpepfx Abgof • Compatible with Windows Professional 64bit • Professional MOPA fiber laser source JPT with 20 watts of power and up to 600 kHz (optional with variable pulse width and up to 2000 kHz for color annealing marking) • Scanner unit “DigiScan Eco 10” for high fidelity and precision • T-slot plate from Isel for easy workpiece fastening and positioning • Front sliding door with large viewing window and certified laser protection glass made in Germany, including monitoring -> Door opening 450 mm • Left side sliding door with monitoring for long parts -> Door opening 400 mm • Clearly arranged control panel with Siemens push buttons • Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) • Motorized height adjustment with focus finder • Freestanding housing made of aluminum profiles with two manual doors for simple, user-friendly, and safe marking Laser Class 1 • Underbody of the freestanding housing with Rittal control cabinet and integrated extraction station • LED workspace lighting made in Germany • High-performance mini PC with 32 GB • 21" TFT touch screen for fatigue-free work • Professional marking software in German • Barcode and QR code support • Serial number function • Batch scanning from Excel file, network, or database! • Laser parameter finder via matrix across 2 parameters (e.g., frequency to speed, frequency to power) • TCP IP connectivity: various commands can now be transmitted to the software via TCP protocol. This enables simple integration of external components such as camera position detection, etc. • Industry 4.0: The system status can be processed anytime via the TCP/IP protocol • Inputs and outputs for automation • 3D preview for rotary axis processing • Up to 50% performance increase thanks to 64-bit technology • Improved stability • Optionally control up to 4 axes WITHOUT switching via plugins • Optional DEEP engraving (slicer software with Z-axis control) • Increased engraving speed for hatching through new algorithms • Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus position check • Connection option for external extraction • Software suitable for Windows 10 • USB cable for PC connection • Operating manual and control software in German As options, we also offer: ⇒ IPG or SPI fiber laser sources in various output powers ⇒ Scanlab equipment ⇒ Suitable extraction systems ⇒ Automation for loading, conveyor belts, and more! ⇒ 3D marking function ⇒ Automatic focus adjustment via special laser sensor ⇒ Rotary unit in various designs ⇒ Motorized X and Y slides ⇒ Interlock system for marking WITHOUT safety enclosure—just with personal protective equipment for bulky parts Training in Schweinfurt included! Our engraving lasers are manufactured in our own factory in Schweinfurt! Therefore, individual customizations are possible at any time! ⇒ Made in Schweinfurt! Images may contain options! We are your partner for laser marking systems. Whether manual or automatic laser marking systems, we are happy to provide you with a quotation.

Stanje: rabljeno, Leto izdelave: 2016, obratovalne ure: 7.847 h, Power: 440 kW (598 HP) Contact Emal Jaweed for further information. Crawler Tractor, Challenger MT875E, Year of Manufacture: 2016, Operating Hours: 7,847 h, Length: 6,400 mm, Width: 2,500 mm, Height: 3,500 mm, Weight: 23,200 kg, Track Width: 910 mm, Engine: AGCO Power, Engine Output: 440 kW, Enclosed cab, Air conditioning, Number of cylinders: 12, Air ride seat, Trimble Precision IQ display, Trimble AG-25 antenna, AdBlue, front rim weights, side frame weights, rear remote controls, additional hydraulics, ISOBUS, air brake system, front idler wheel weights, crawler chassis, GPS control, torque: 2,840 Nm. Other information: * We offer over 200 units for sale. * Our location is 30 km north of Frankfurt/Main Airport. * Financing & leasing available. * Specialists in worldwide transport & shipping. * No liability for typographical or printing errors. * Subject to errors and prior sale. Todpfx Absr Nfahegof * Trade-in possible. * For vehicle/machinery purchases, exclusively the General Terms and Conditions (AGBs) of Jaweed GmbH apply. * Further information as well as our terms and conditions can be found on our website. Goods are sold only under our General Terms and Conditions (AGB).

Stanje: rabljeno, prevoženi kilometri: 49.161 km, moč: 220 kW (299,12 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rdeča, skupna masa: 15.000 kg, konfiguracija osi: 2 osi, prva registracija: 04/2018, naslednji pregled (TÜV): 02/2023, emisijski razred: Euro 6, prostornina tovornega prostora: 5 m³, dolžina tovornega prostora: 4.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 600 mm, Oprema: ABS, klimatska naprava, * Sonnenblende * ABS * ASR * ESP * Regensensor * Spurhalteassistent * Radio * Bordcomputer * Rückfahrwarner * Tempomat * Berganfahrhilfe Todpfx Abexmm H Isgsf * Fensterheber elektr. * Spiegel elektr. verstellbar * Spiegelheizung * Zentralverriegelung * Automatisches Fahrlicht * Dachluke * Heckfenster * Fahrerkomfortsitz * Sitzheizung * 3. Sitz * Diff.-Sperre Hinterachse * Anhängerkupplung * 2-Leiter Luftanschluss * Kugelkopfkupplung * Hydraulikanschluss für Anhänger * 8-Gang * Federung: Blatt * Nutzlast:8345kg * Dauerbremse: Motorbremse ----Aufbau: Meiller 3-Seiten Stahl, Stirnwand erhöht, federentlastete Bordwände links + rechts, Zurrösen. Verkauf nur an Gewerbetreibende. BEI EXPORT IST NUR DER NETTOPREIS ZU BEZAHLEN !!!!! ALLE ANGABEN OHNE GEWÄHR INS. AUSSTATTUNG+ZUBEHÖR.Grundlage aller Kaufverträge, Rechnungen, Proforma-Rechnungen, Bestellungen, Verkaufsgespräche sind unsere AGBs (Siehe dazu Impressum).

Stanje: rabljeno, prevoženi kilometri: 311.962 km, moč: 309 kW (420,12 KM), vrsta goriva: dizel, barva: rdeča, konfiguracija osi: 8x2, velikost pnevmatike: 385/65R22.5, gorivo: dizel, medosna razdalja: 5.300 mm, zavore: zaviranje z motorjem, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, Leto izdelave: 2017, Oprema: ABS, klimatska naprava, nadzor oprijema, tempomat, zapora diferenciala, = Additional Options and Accessories = - AdBlue system - Differential lock - Electric windows - Lift axle - Air suspension - PTO (Power Take-Off) - Radio - Reversing camera - Disc brakes - Heated seats - Sun visor - Spotlights - Toolbox = Notes = Hiab hooklift: Type: XR22SL56 560 cm Tsdpfx Aoxrkfxsbgjf 22,000 kg Hiab crane: Type: X-HIPRO 302 EP-4 4.40 m – 6,000 kg 6.10 m – 4,200 kg 8.10 m – 3,100 kg 10.30 m – 2,380 kg 12.60 m – 1,940 kg Rotator + 6th function Hydraulic rear underrun protection = Further Information = Technical information Number of cylinders: 6 Drivetrain AdBlue system: Yes Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steered; Tire tread left: 60%; Tire tread right: 60%; Suspension: leaf suspension Rear axle 1: Tire size: 385/65R22.5; Steered; Tire tread left: 50%; Tire tread right: 20%; Suspension: air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Tire tread left inner: 20%; Tire tread left outer: 20%; Tire tread right inner: 30%; Tire tread right outer: 30%; Suspension: air suspension Rear axle 3: Tire size: 385/65R22.5; Steered; Tire tread left: 10%; Tire tread right: 10%; Suspension: air suspension Dimensions Dimensions (L x W): 930 x 255 cm Weights Unladen weight: 17,170 kg Payload: 19,830 kg Gross vehicle weight: 37,000 kg Functional Crane: Hiab Financial information Price: On request Identification Type number: FM 420 8x2 / HIAB HOOKLIFT + 30 = Company Information = ALL PRICES ARE NET EXPORT PRICES. Joris Versteijnen NL-DE-GB) Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide accurate information, however, no rights can be derived from the information provided.

Leto izdelave: 2009, Stanje: rabljeno, Used machine Year of manufacture: 2009 Condition: overhauled The concept of this machine is extremely straightforward. The workpiece is placed into the machine. A fast-adjusting stop with pneumatic locking centers the workpiece inside the machine. Upon pressing a foot switch, the workpiece is pneumatically clamped and automatically conveyed to the drilling unit (30 m/min). The vertical spindles drill from below, preventing chips from remaining on the workpiece as they would on a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece length is unlimited, since the piece is conveyed to the drilling unit (X-axis). The drilling spindles are freely programmable either individually or in blocks, and move along the Y-axis. Drilling depth as well as the horizontal drills are controlled via the Z-axis. After all drilling operations are completed, the workpiece is either returned to the infeed side or, on request, conveyed to the outfeed side. Unlike conventional machining centers, where the workpiece is clamped using vacuum and vacuum clamps need to be adjusted to the workpiece size, this step is completely eliminated in the 3-axis point-to-point drilling machine. Advantages: - High processing speed - Excellent price-performance ratio - Compact footprint All drilling operations can be performed in a minimal space: - Line boring - Construction drilling - Fitting drilling - Cabinet connector drilling The drilling head features 7 vertical drilling spindles and 1 horizontal double drilling spindle. Equipment: - Welded machine frame - Drilling head with 7 vertical spindles and 1 horizontal double spindle - 3-axis control: X: NC-controlled feed of the panel via overlapping pneumatic clamp Y: NC-controlled movement of the drilling head Z: NC-controlled drilling depth adjustment - TRK precision guides - Pneumatic segmented pressure beam above the drilling unit - Pneumatic roller hold-downs at infeed - Pneumatic clamping unit for transport - Pneumatically lockable side stop with rollers - Control via PC with Windows XP (1 GB flash memory) - 8'' color display - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical data: Number of controlled axes: 3 Maximum panel width: 1,000 mm Maximum drilling width: 800 mm Maximum feed speed (X-axis): 30 m/min Tjdjwmhmfopfx Abgsf Spindle speed: 3,400 rpm Maximum drill bit diameter: 35 mm Maximum total drill bit length: 70 mm Drill holder: 10 mm shaft with clamping surface Connected load: 2.5 kW Extraction port diameter: 100 mm Required pressure: 6 bar Working height: 900 mm Folding roller support at infeed side, 500 x 750 mm Machine dimensions (LxW): 1,650 x 1,920 mm Availability: short-term Location: NRW

Stanje: novo, Leto izdelave: 2021, Bernardo Gear-driven Column Drilling Machine GB 32 STi Technical Specifications Todpfxjg Hwmxe Abgsf Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 35 mm Maximum tapping capacity: M20 Drill chuck: 1 - 13 mm / B16 Morse taper: MT 4 Spindle speed / Number of steps: 125 - 3030 rpm / 12 Feed range: 0.1 / 0.2 / 0.3 mm/rev Throat depth: 325 mm Max. spindle to table distance: 690 mm Spindle to base plate distance: 1250 mm Quill stroke: 160 mm Column diameter: 120 mm Table size / T-slot size: 500 x 420 mm / 14 mm Base plate working surface: 365 x 370 mm Motor output (S1 100%): 1.0 / 1.2 kW Motor input power (S6 40%): 1.5 / 1.8 kW Machine dimensions (W x D x H): 570 x 900 x 2200 mm Weight approx.: 415 kg Scope of Delivery • 3-jaw drill chuck, 1 - 13 mm / B16 • Drill chuck arbor MT 4 / B16 • Reducing sleeves MT 4 / 3, MT 4 / 2 • Coolant device • Electromagnetic spindle feed • Tapping device • Automatic tool ejector • LED machine lamp • Digital speed display • Height-adjustable safety guard • Initial fill with Shell Tellus 46

Stanje: novo, Leto izdelave: 2025, MarkerHero EXCLUSIVE XL Industry 4.0 – Model 2025 For metal, plastics, and much more! • EZCAD 3 (genuine 64-bit control card) supporting up to 4 axes • Compatible with Windows Professional 64-bit • Professional MOPA fiber laser source JPT with 20 watts power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color annealing marking) • Scanner unit “DigiScan Eco 10” for high detail and precision • T-slot base plate from Isel for easy fixture and positioning of your workpiece • Front sliding door with large viewing window and certified laser safety glass made in Germany, including monitoring -> Door opening: 450 mm • Left-side sliding door with monitoring for processing long parts -> Door opening: 400 mm • Clear control panel with Siemens push-buttons • Scan area approx. 100 x 100 mm (optional: 150/200/300 mm) • Motorized height adjustment with focus finder • Free-standing housing made from aluminum profiles, with two manual doors for simple, user-friendly, and safe marking; Laser Class 1 • Cabinet base with integrated Rittal control cabinet and extraction compartment • LED workspace lighting made in Germany • High-performance mini PC with 32 GB RAM • 21” TFT touchscreen for fatigue-free operation • Professional marking software in German • Barcode and QR code support • Serial number function • Batch scanning from Excel files, network, or database! • Laser parameter finder matrix via 2 parameters (e.g., frequency to speed, frequency to power) • TCP/IP connectivity – commands can be transmitted to the software via TCP protocol, enabling easy integration with external components (such as camera position detection, etc.) • Industry 4.0: Machine status can be processed at any time via TCP/IP protocol • I/O ports for automation • 3D preview function for rotary axis processing • Performance increase of up to 50% thanks to 64-bit technology • Improved stability • Optionally control up to 4 axes WITHOUT switching via PLUGins • Optional DEEP engraving (slicer software with Z-axis control) • Engraving speed for hatching increased through new algorithms • Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with dual laser pointers for visual focus verification • Connection port for external exhaust systems • Software suitable for Windows 10 • USB cable for PC connection • Operating manual and software in German Optional features include: => IPG or SPI fiber laser sources in various power ratings => Scanlab components => Suitable extraction systems => Automation for part handling, conveyors, and more! Tjdpewga Hwofx Abgsf => 3D marking capability => Automatic focus adjustment via special laser sensor => Rotary unit in various versions => Motorized X and Y slides => Interlock system allowing operation WITHOUT a protective enclosure, using only personal protective equipment for bulky items Training included in Schweinfurt! Our engraving lasers are manufactured at our facility in Schweinfurt, allowing for customized solutions at any time! => Made in Schweinfurt! Images may feature optional equipment. We are your partner for laser marking solutions, from manual to fully automated systems. We would be pleased to provide you with a quote.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, skupna masa: 10.000 kg, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, dolžina podajanja os X: 120 mm, dolžina pomika po osi Y: 200 mm, dolžina podajanja os Z: 170 mm, GB-A1500 Vollautomatisches Hochgeschwindigkeits-Biegezentrum Biegelänge (mm): 1500 Biegehöhe (mm): 4 Seiten 160 4 Seiten 170/2 Seiten 350 4 Seiten 350 Minimale Formgröße: (4-seitige Kantung) (mm) 4 Seiten 160: 350 × 250 4 Seiten 170/2 Seiten 350: 350 × 250 4 Seiten 350: 350 × 250 Maximale Biegegröße (mm): 1500 × 1500 X-Achsen-Verfahrweg: 120 mm Y-Achsen-Verfahrweg: 4 Seiten 160: 200 mm 4 Seiten 170/2 Seiten 350: 305 mm 4 Seiten 350: 305 mm Z-Achsen-Verfahrweg: 4 Seiten 160: 170 mm 4 Seiten 170/2 Seiten 350: 357 mm 4 Seiten 350: 357 mm Höhe des Pressmessers: 4 Seiten 160: 177 mm 4 Seiten 170/2 Seiten 350: 177 mm 4 Seiten 350: 357 mm Achszahl: Tsdpev Ikvgofx Abgjf Saugheberg: 11 Druckarm: 14 Maschinenleistung (kW): Saugheberg: 34,7 kW Druckarm: 36,35 kW Max. Biegestärke Aluminiumblech (mm): 3 Max. Biegestärke Stahlblech (mm): 2 Max. Biegestärke Edelstahl (mm): 1,5 Max. Biegegeschwindigkeit (s/Messer): 0,2 Gesamtmaße (mm): Länge (Vorderseite): 4 Seiten 160: 1.890 2-4 Seiten 350 Saugheber: 1.890 2-4 Seiten 350 Druckarm: 1.890 Breite (Seite): 4 Seiten 160: 3.300 2-4 Seiten 350 Saugheber: 3.536 2-4 Seiten 350 Druckarm: 4.127 Höhe: 4 Seiten 160: 2.666 2-4 Seiten 350 Saugheber: 2.946 2-4 Seiten 350 Druckarm: 2.946 Gewicht (ca. kg): 4 Seiten 160: --- 2-4 Seiten 350 Saugheber: 10.000 2-4 Seiten 350 Druckarm: 10.000 1) Maschinenrahmen als schwerste Schweißkonstruktion, Spannungsarmglühen zur Minimierung von Rahmenverzug. 2) Y-Achse mit voll geschlossenem Regelkreis. 3) Proportionales hydraulisches Kompensationssystem zur Vermeidung von Verformungen. 4) Deutscher HEIDENHAIN-Längenmesssystem. 5) Taiwanesische HIWIN-Kugelgewindespindel und Linearführung, leistungsstarke japanische Yaskawa-AC-Servomotoren und -Antriebe. 6) Umfangreiche Funktionen mit professionellem CYBELEC/DELEM-Steuerungssystem. 7) Elektrohydraulisches Servo-Synchronisationsmodul und deutsches BOSCH-Druckmodul. 8) Wiederholgenauigkeit: +/- 0,01 mm. 9) Parallelitätsgenauigkeit: +/- 0,01 mm.

Stanje: rabljeno, prevoženi kilometri: 49.161 km, moč: 220 kW (299,12 KM), prva registracija: 04/2018, skupna masa: 15.000 kg, vrsta goriva: dizel, barva: rdeča, konfiguracija osi: 2 osi, naslednji pregled (TÜV): 02/2023, vrsta prenosa: samodejen, emisijski razred: Euro 6, prostornina tovornega prostora: 5 m³, širina tovornega prostora: 2.350 mm, dolžina tovornega prostora: 4.200 mm, višina nakladalnega prostora: 600 mm, Oprema: ABS, klimatska naprava, * Sonnenblende * ABS * ASR * ESP * Regensensor * Spurhalteassistent * Radio * Bordcomputer * Rückfahrwarner * Tempomat * Berganfahrhilfe * Fensterheber elektr. * Spiegel elektr. verstellbar * Spiegelheizung * Zentralverriegelung * Automatisches Fahrlicht Tsdpexmm Hzefx Abgef * Dachluke * Heckfenster * Fahrerkomfortsitz * Sitzheizung * 3. Sitz * Diff.-Sperre Hinterachse * Anhängerkupplung * 2-Leiter Luftanschluss * Kugelkopfkupplung * Hydraulikanschluss für Anhänger * 8-Gang * Federung: Blatt * Nutzlast:8345 * Dauerbremse: Motorbremse ----Aufbau: Meiller 3-Seiten Stahl, Stirnwand erhöht, federentlastete Bordwände links + rechts, Zurrösen. Verkauf nur an Gewerbetreibende. BEI EXPORT IST NUR DER NETTOPREIS ZU BEZAHLEN !!!!! ALLE ANGABEN OHNE GEWÄHR INS. AUSSTATTUNG+ZUBEHÖR.Grundlage aller Kaufverträge, Rechnungen, Proforma-Rechnungen, Bestellungen, Verkaufsgespräche sind unsere AGBs (Siehe dazu Impressum).

Stanje: rabljeno, prevoženi kilometri: 1.128.674 km, moč: 338 kW (459,55 KM), vrsta goriva: dizel, barva: zelen, konfiguracija osi: 6x2, velikost pnevmatike: 385/65R22.5, gorivo: dizel, medosna razdalja: 5.100 mm, zavore: zaviranje z motorjem, voznikova kabina: spalna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 5, vzmetenje: jeklo-zrak, Leto izdelave: 2008, Oprema: ABS, klimatska naprava, nadzor oprijema, parkirni grelec, tempomat, zapora diferenciala, = Additional Options and Accessories = Todsxrc Urepfx Abgsf - Differential lock - Electric windows - Lift axle - Radio - Disc brakes - Sun visor - Auxiliary heater = Notes = Hiab 377 EP-5 HIPRO Radio / remote control. 4 x hydraulic outriggers. 5 x hydraulic extensions. Rotator. 6th function. 3.20 m - 10,000 kg. 4.40 m - 7,700 kg. 6.20 m - 5,300 kg. 8.20 m - 3,850 kg. 10.40 m - 2,940 kg. 12.70 m - 2,360 kg. 15.00 m - 1,980 kg. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steering; Tire tread left: 60%; Tire tread right: 60%; Suspension: Leaf suspension Rear axle 1: Twin tires; Tire tread inside left: 25%; Tire tread outside left: 25%; Tire tread inside right: 25%; Tire tread outside right: 25%; Suspension: Air suspension Rear axle 2: Twin tires; Tire tread inside left: 25%; Tire tread outside left: 25%; Tire tread inside right: 25%; Tire tread outside right: 25%; Suspension: Air suspension Dimensions Dimensions (L x W): 746 x 250 cm Weights Unladen weight: 16,070 kg Payload: 11,930 kg Gross weight: 28,000 kg Functionality Crane: Hiab Identification Type number: XF 105.460 6X2 / HIAB 37 t/m CRA = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), We speak Russian. We strive to provide accurate information, but no rights can be derived from the texts provided.

Stanje: novo, Column Drilling Machine Bernardo GB 35 HSV with Coolant System Maximum drilling capacity: 32 mm Drill chuck: 1 – 16 mm / B16 Morse taper: MT 4 Spindle speed (12 steps): 75 – 3200 rpm Feed range: 0.10 / 0.18 / 0.26 mm/rev Throat depth: 295 mm Max. distance spindle/table: 775 mm Distance spindle/base plate: 1185 mm Quill travel: 125 mm Column diameter: 115 mm Table size: 500 x 455 mm T-slot size: 14 mm Base plate working area: 375 x 365 mm Motor output power S1 100%: 1.1 / 1.5 kW (400 V) Motor input power S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 630 x 700 x 2050 mm Weight approx.: 340 kg Scope of delivery Tedjd Hbwiopfx Abgof Quick-action drill chuck 1 – 16 mm / B16 Drill chuck arbor MT 4 / B16 Coolant system Reducing sleeve MT 4 / 3 Height-adjustable safety guard Digital drilling depth display Tapping device LED machine lamp Operating tools

Stanje: rabljeno, prevoženi kilometri: 43.777 km, moč: 220 kW (299,12 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: rdeča, skupna masa: 15.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2019, naslednji pregled (TÜV): 12/2023, emisijski razred: Euro 6, prostornina tovornega prostora: 5 m³, dolžina tovornega prostora: 4.200 mm, širina tovornega prostora: 2.350 mm, višina nakladalnega prostora: 600 mm, Oprema: ABS, klimatska naprava, * Sonnenblende * ABS * ASR * ESP * Regensensor * Spurhalteassistent * Radio * Bordcomputer * Rückfahrwarner * Tempomat * Berganfahrhilfe * Fensterheber elektr. * Spiegel elektr. verstellbar * Spiegelheizung * Zentralverriegelung * Automatisches Fahrlicht * Dachluke * Heckfenster * Fahrerkomfortsitz * Sitzheizung * 3. Sitz * Diff.-Sperre Hinterachse * Anhängerkupplung * 2-Leiter Luftanschluss * Kugelkopfkupplung * Hydraulikanschluss für Anhänger * Active Brake Assist * 8-Gang * Federung: Blatt * Nutzlast:8340 * Dauerbremse: Motorbremse ----Aufbau: Meiller 3-Seiten Stahl, Stirnwand erhöht, federentlastete Bordwände links + rechts, Zurrösen. Tedpfxsxmm E Ro Abgsf Verkauf nur an Gewerbetreibende. BEI EXPORT IST NUR DER NETTOPREIS ZU BEZAHLEN !!!!! ALLE ANGABEN OHNE GEWÄHR INS. AUSSTATTUNG+ZUBEHÖR.Grundlage aller Kaufverträge, Rechnungen, Proforma-Rechnungen, Bestellungen, Verkaufsgespräche sind unsere AGBs (Siehe dazu Impressum).

Stanje: rabljeno, prevoženi kilometri: 801.609 km, moč: 302 kW (410,61 KM), vrsta goriva: dizel, barva: zelen, konfiguracija osi: 8x2, velikost pnevmatike: 385/55R22.5, gorivo: dizel, medosna razdalja: 4.400 mm, zavore: zaviranje z motorjem, voznikova kabina: spalna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 5, vzmetenje: drugo, Leto izdelave: 2011, Oprema: ABS, klimatska naprava, nadzor oprijema, parkirni grelec, tempomat, zapora diferenciala, = Additional Options and Equipment = - AdBlue system - Differential lock - Electric windows - Refrigerator - Lift axle - PTO (power take-off) Tedpfjxrc Ufox Abgef - Radio - Sun visor - Spotlights - Auxiliary heater - Toolbox = Remarks = DAF CF 85.410 8x2 Lift and steering axle. Hiab 700E-7 HiPro. Remote control. 4 x hydraulic outriggers. Rotator on the main boom of the crane. 4.40 m – 18,000 kg 5.90 m – 13,900 kg 7.60 m – 10,500 kg 9.30 m – 8,400 kg 11.20 m – 6,900 kg 13.20 m – 5,800 kg 15.10 m – 5,000 kg Fly jib 175X-5 18.40 m – 2,920 kg 19.40 m – 2,740 kg 20.70 m – 2,540 kg 21.90 m – 2,320 kg 23.40 m – 1,840 kg 24.90 m – 1,520 kg = Additional Information = Technical Data Number of cylinders: 6 Drivetrain AdBlue system: Yes Transmission Transmission: 16-speed manual gearbox Axle Configuration Brakes: Disc brakes Front axle 1: Tyre size: 385/55R22.5; Steered; Tyre tread left: 20%; Tyre tread right: 20%; Suspension: leaf springs Front axle 2: Tyre size: 385/55R22.5; Steered; Tyre tread left: 20%; Tyre tread right: 20%; Suspension: leaf springs Rear axle 1: Tyre size: 315/60R22.5; Twin tyres; Tyre tread left inside: 15%; Tyre tread left outside: 15%; Tyre tread right inside: 15%; Tyre tread right outside: 15%; Suspension: air suspension Rear axle 2: Tyre size: 315/60R22.5; Steered; Tyre tread left: 25%; Tyre tread right: 25%; Suspension: air suspension Dimensions Dimensions (L x W): 813 x 255 cm Weights Unladen weight: 23,735 kg Payload: 13,265 kg Gross Vehicle Weight: 37,000 kg Functional Crane: Hiab Financial Information Price: On request Identification Type number: CF 85.410 / HIAB 70TM + JIB / 8X = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-EN) Wouter Greutink (NL-DE-EN-ES-IT) Russian spoken. We strive to provide accurate information; no legal rights can be derived from the information provided.

Stanje: novo, Bernardo Gear-driven Pillar Drilling Machine GB 28 S Technical Specifications Tedsd Du T Ajpfx Abgef - Maximum drilling capacity: 28 mm - Maximum tapping capacity: M12 - Drill chuck: 1–13 mm / B 16 - Morse taper: MK 3 - Spindle speed (12 steps): 75–3200 rpm - Throat depth: 250 mm - Maximum spindle-to-table distance: 810 mm - Spindle-to-base plate distance: 1210 mm - Quill stroke: 130 mm - Column diameter: 100 mm - Base plate working surface: 325 x 330 mm - Table size / T-slot size: 375 x 375 mm / 14 mm - Motor output (S1 100%): 0.85 / 1.1 kW (400 V) - Motor input (S6 40%): 1.1 / 1.5 kW (400 V) - Machine dimensions (W x D x H): 450 x 600 x 2020 mm - Approx. weight: 215 kg Scope of Delivery • Keyed drill chuck 1–13 mm / B 16 • Drill chuck arbor MK 3 / B 16 • Reducer sleeve MK 3 / 2 • Automatic tool ejector • Tapping device • Forward/reverse switch • Height-adjustable protective cover • LED machine lamp

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 06/2021, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, medosna razdalja: 9.920 mm, barva: rdeča, Leto izdelave: 2021, Meusburger MPG-2 - Luftfederung - BPW Achse - 450 cm ausziehbar - Ladehöhe: 30 cm - Fernbedienung für die Lenkung - Breite Warntafeln Weitere Informationen: Reifenmaß: 245/70R17.5 Federung: Luftfederung Hinterachse 1: Zwillingsbereift; gelenkt; Reifenprofil links innen: 60%; links außen: 60%; rechts innen: 60%; rechts außen: 60% Tjdpfouycrnex Abgef Hinterachse 2: Zwillingsbereift; gelenkt; Reifenprofil links innen: 60%; links außen: 60%; rechts innen: 60%; rechts außen: 60% Leergewicht: 10.300 kg Nutzlast: 27.700 kg Gesamtgewicht: 38.000 kg Modellnummer: MPG-2 / abnehmbarer Schwanenhals / ausziehbar Firmeninformationen: Alle Preise sind netto für den Export. Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT). Wir sprechen Russisch. Wir bemühen uns um korrekte Angaben, aus den veröffentlichten Texten können jedoch keine Rechte abgeleitet werden.

Stanje: rabljeno, prevoženi kilometri: 311.962 km, moč: 309 kW (420,12 KM), prva registracija: 08/2017, vrsta goriva: dizel, barva: rdeča, konfiguracija osi: 8x2, velikost pnevmatike: 385/65R22.5, gorivo: dizel, medosna razdalja: 5.300 mm, zavore: zaviranje z motorjem, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: jeklo-zrak, Leto izdelave: 2017, Oprema: ABS, klimatska naprava, nadzor oprijema, tempomat, zapora diferenciala, žerjav, = Additional Options and Equipment = - AdBlue system - Differential lock - Electric windows - Lift axle - Air suspension - PTO (Power Take-Off) - Radio - Reversing camera - Disc brakes - Seat heating - Sun visor - Spotlights - Toolbox Tsdpfexq Ebxox Abgsf = Remarks = Hiab hooklift: Type: XR22SL56 560 cm 22,000 kg Hiab crane: Type: X-HIPRO 302 EP-4 4.40 m – 6,000 kg 6.10 m – 4,200 kg 8.10 m – 3,100 kg 10.30 m – 2,380 kg 12.60 m – 1,940 kg Rotator + 6th function Hydraulic rear underrun protection = Further Information = Technical data Number of cylinders: 6 Drivetrain AdBlue system: Yes Axle configuration Brakes: Disc brakes Front axle: Tire size: 385/65R22.5; Steered; Tire tread left: 60%; Tire tread right: 60%; Suspension: Leaf spring Rear axle 1: Tire size: 385/65R22.5; Steered; Tire tread left: 50%; Tire tread right: 20%; Suspension: Air suspension Rear axle 2: Tire size: 315/80R22.5; Twin tires; Inner left tire tread: 20%; Outer left: 20%; Inner right: 30%; Outer right: 30%; Suspension: Air suspension Rear axle 3: Tire size: 385/65R22.5; Steered; Tire tread left: 10%; Tire tread right: 10%; Suspension: Air suspension Dimensions Dimensions (L x W): 930 x 255 cm Weights Unladen weight: 17,170 kg Payload: 19,830 kg GVW: 37,000 kg Functional Crane: Hiab Maintenance APK (Dutch MOT–Technical Inspection): Valid until 08.2026 Financial Information Price: On request Identification Type number: FM 420 8x2 / HIAB HOOKLIFT + 30 = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po russki. We make every effort to provide correct information, but no rights can be derived from the content provided.