Gbs 250 Super Autocut nakup rabljenega (22.390)

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 27 x 0.9 mm Table height: 950 mm Cutting speed: 18–110 m/min Cutting diameter: 255 mm Cutting capacity at 90° (square): 240 mm Cutting capacity at 90° (flat): 300 x 180 mm Cutting capacity at 45° (round): 210 mm Cutting capacity at 45° (square): 190 mm Cutting capacity at 45° (flat): 200 x 160 mm Cutting capacity at 60° (round): 135 mm Cutting capacity at 60° (square): 110 mm Cutting capacity at 60° (flat): 130 x 100 mm Cutting capacity at 45° right (round): 180 mm Cutting capacity at 45° right (square): 160 mm Cutting capacity at 45° right (flat): 180 x 100 mm Total power requirement: 1.5/1.8 kW Isdst I D Tuspfx Ah Aotr Machine weight approx.: 350 kg Space requirement approx.: 1700 x 900 x 2000 mm Manufacturer no.: 20437 Description: - Mitre cuts left 60° and right 45° - Quick-action vice, adjustable in T-slot for fast repositioning - Hydraulic brake cylinder - Large, ball-bearing turntable for easy mitre adjustment (durable) - Chip removal brush - Machine base with automatic cooling system - Lockable main switch, separate emergency stop - EMC (Electromagnetic Compatibility), UVV (Accident Prevention Regulation) - Current consumption display (indicates saw band wear, tool monitoring) - Automatic increased power output with the proven Berg & Schmid 3-stage AutoCut system

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.42 t Double-miter metal band saw, GBS 250 Super AutoCut - Mitre cuts up to 60° to the left and 45° to the right Itsdpefgyh Tsfx Ah Ajr - Ball-bearing rotary table - Quick-release vice - Heavy-duty, large material support surface - Automatic coolant system

Stanje: novo, Leto izdelave: 2023, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, največja višina reza: 150 mm, BERG+SCHMID Double Mitre Bandsaw GBS 250 Super AutoCut Cutting speed: 18–110 rpm • Mitre cuts: 60° left / 45° right • Quick-release vice, adjustable • Heavy-duty vice and cast iron machine base • Ball-bearing turntable • Hydraulic brake cylinder • Large, heavy-duty material support • Automatic coolant system • Worm gear drive running in an oil bath • Fully enclosed saw frame Itodpfx Aher Ik Sqe Aer • Adjustable ball bearings • Tool compartment – base with door • Cut monitoring via ammeter • Variable cutting pressure feed regulator • Support roller (infeed side) • Machine base (supplied dismantled) GBS 250 Super AutoCut 3-Step System: I. Automatic lowering of the saw frame via hydraulic cylinder, stepless feed adjustment, with end switch at end of cut II. Rapid lowering mode for the saw frame up to the workpiece, then automatic switch to normal cutting feed (e.g., for marking) III. Hydraulic cylinder functions as brake cylinder: a) Manual mode (e.g., for notching) or b) Lowering while stationary Saw blade dimensions: 2765x27x0.9 mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication systems, etc., available on request! Delivery time: ex stock Waiblingen Beinstein

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 950 mm Band speed 35 + 70 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m Iedsurc S Rspfx Ah Aetr Double mitre metal band saw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing rotary table - Quick-release vice - Heavy-duty, large material support - Automatic coolant system

Stanje: pripravljen za uporabo (rabljen), Hitrost rezanja: 80 m/min, dimenzije tračnega lista X/Y/Z: 2760mm/27mm/0,9mm, kotno območje: 60°/45°, delovna višina: 950mm, rezalno območje X/Y: 280mm/150mm, največji premer reza: 230mm. Dimenzije stroja X/Y/Z: pribl. 1500mm/1000mm/1800mm, teža: pribl. 350kg. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Iedpfxjxxa Txe Ah Astr

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cut width: 300 x 180 mm Speeds: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight: approx. 450 kg Space requirement: approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts: left 60° + right 45° Iedpfxsfn Andj Ah Aotr • Material height sensor (automatic cut start detection) • Frame and gearbox made from a single casting: extremely quiet and low-vibration operation • Hydraulically operated vice, laterally adjustable • Guided, high-quality industrial bearings • Heavy-duty vice and machine cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable cutting pressure feed regulator • Support roller on infeed side • Ball-bearing rotary table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to material start or, for serial cutting, start cutting immediately 4. Stop saw band 5. Raise frame slightly above the material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 255 mm Itedpfx Ahsfgyh Us Aor Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° / right 45° • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration operation • Hydraulically movable vice • Guided, high-quality industrial bearings • Heavy-duty vice & machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball-bearing turntable Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material or, for series cutting, direct cutting 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Leto izdelave: 2000, Stanje: dober (rabljeno), KOPACK 250 SUPER 6-Farben-Buchdruckmaschine mit Flexolackiereinheit, vollständiger UV-Ausstattung sowie Flachbett- und Rotationsstanze. Diese Maschine ist auf die hochwertige Produktion von Selbstklebeetiketten ausgelegt und bietet eine kompakte, leistungsfähige Ausstattung inklusive UV-Druck, Stanzung und Bahnführung. Nachfolgend finden Sie die vollständigen technischen Spezifikationen sowie die kommerziellen Bedingungen. Eine Besichtigung und Funktionsprüfung am Installationsstandort ist auf Anfrage möglich. Technische Spezifikation Allgemeine Daten Hersteller: KOPACK Modell: 250 SUPER Druckverfahren: 6 × Buchdruckwerke 1 × Flexo-Lackier-/Beschichtungseinheit Anwendung: Etiketten, selbstklebende Materialien, Papier- und Folienmaterialien Bahn & Format Max. Bahnbreite: 250 mm Ab- und Aufwickeldurchmesser: bis 800 mm (CI-Trommel) Kern-Durchmesser: 76 mm (3“) Materialien: Papier, selbstklebende Laminatmaterialien, Folien Druckverfahren: Vollständiges UV-Trocknungssystem Register: Mechanisches Register über Zahnradantrieb Itjdsx Ez Tvepfx Ah Aor Trocknung & Oberflächenbehandlung UV-System: Komplettes UV-Ausstattung Corona-Vorbehandlung: Sherman Corona Treater installiert (für verbesserte Farb- und Lackhaftung auf Folien) Bahnführung Bahnführungssystem: BST Bahnführung Materialtransport mit Bahnkantenführung und Zugspannungsregelung Manueller Spleißtisch Druck- & Weiterverarbeitungseinheiten 6 × Buchdruckfarben 1 × Flexo-Lackier-/Beschichtungseinheit Flachbett-Stanzstation Rotationsstanzeinheit Integrierte Abfallstreifen-Entsorgung und Aufwicklung Elektrik / Steuerung Zentrales Bedienpult Not-Aus-System UV-Verriegelung / Sicherheitsabschaltung Elektrische Dokumentation vorhanden (soweit vorhanden) Zubehör im Lieferumfang Standard-Plattenzylinder Stanzrahmen / Rotationsstanzwerkzeuge (soweit verfügbar) UV-Lampen mit Vorschaltgeräten Bahnkantenführungs-Sensoren und -Bedienfelder

Stanje: novo, Premer reza 240 mm Dimenzije žaginega traku 2730 x 27 x 0,9 mm Višina mize 920 mm Hitrost rezanja 35 + 70 m/min Zmogljivost rezanja pri 90° okroglo 240 mm Zmogljivost rezanja pri 90° kvadrat 230 mm Zmogljivost rezanja pri 90° pravokotnik 270x230 Zmogljivost rezanja pri 45° okroglo 210 mm Isdpfxjxpi Aqs Ah Aetr Zmogljivost rezanja pri 45° kvadrat 200 mm Zmogljivost rezanja pri 45° pravokotnik 200x210 mm Zmogljivost rezanja pri 60° okroglo 130 mm Zmogljivost rezanja pri 60° kvadrat 130 mm Zmogljivost rezanja pri 60° plosko 130x160 mm Potrebna skupna moč 1,2 kW Teža stroja ca. 0,26 t Prostorske zahteve ca. 0,9 x 1,6 x 1,74 m Nova, neuporabljena razstavna naprava!! • Zamik v levo do 60°

Stanje: novo, Cutting diameter: 280 mm Saw band length: 3370 mm Cutting width: 350 mm Iodpsivuqtofx Ah Ajtr Saw blade dimensions: 3370 x 27 x 0.9 mm Cutting capacity at 90° round: 280 mm Cutting capacity at 90° square: 250 mm Cutting capacity at 90° rectangular: 350 x 200 mm Cutting capacity at 45° round: 240 mm Cutting capacity at 45° square: 220 mm Cutting capacity at 45° rectangular: 230 x 220 mm Cutting capacity at 60° round: 170 mm Cutting capacity at 60° square: 150 mm Cutting capacity at 60° flat: 170 x 100 mm Saw band speed: 37 + 74 m/min Total power requirement: 1.8 kW Machine weight approx.: 0.6 t Space requirement approx.: 1.5 x 1.7 x 2.0 m

Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: 0172, Offer 25286 Technical Specifications: Ijdpsw Ei Tdjfx Ah Aetr - Saw blade dimensions: 400 x 35 x 2.0 mm - Cutting capacity - 90° round: approx. 252 mm - flat: approx. 250 x 160 mm - square: approx. 210 x 210 mm - 45° round: approx. 160 mm - flat: approx. 150 x 150 mm - Automatic material feed - Max. vise opening width: 265 mm - Miter-adjustable vise - Coolant system - Drive: 400 V / 0.65 / 1.6 kW - Required space: approx. W 1400 x H 950 x D 1700 mm - Weight: approx. 600 kg

Stanje: novo, Leto izdelave: 2024, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, največja višina reza: 150 mm, BERG+SCHMID Double Mitre Band Saw GBS 218 Eco AutoCut Cutting Speed: 25-80 m/min • Mitre cuts left up to 60° • For cutting steel, stainless steel, and aluminum profiles • Quick-action vice with rapid clamping device a. • Integrated blade tension control b. • Carbide blade guide c. • Electric coolant system • Machine base (supplied disassembled) The AutoCut system consists of: • Hydraulic cylinder, feed control, spring package, end switch, enabling three operating modes: 1. Automatic lowering of the saw frame via hydraulic cylinder with steplessly adjustable feed control valve and limit switch at the end of the cut 2. Rapid descent of the saw frame from rest position to the workpiece, then switches to normal feed rate 3. Manual operation – hydraulic cylinder functions as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Additional accessories such as saw blades, roller conveyors, length stops, minimum quantity lubrication, etc. available on request! Delivery time: ex stock Waiblingen Beinstein Itsdpfx Ajt I R Edoh Aer

Stanje: novo, Cutting range at 90 degrees: round 250 mm Cutting range at 90 degrees: square 210 mm Cutting range at 90 degrees: rectangle 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 + 70 m/min Total power requirement: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! Double mitre metal bandsaw featuring: Iodpfod Iip Nex Ah Ajtr - Band speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing turntable for rapid mitre adjustment - Movable quick-action vice - Quick-release lever - Automatic coolant system

Stanje: novo, Cutting diameter: 220 mm Cutting range at 90°: square 210 x 210 mm Cutting range at 90°: flat 230 x 185 mm Cutting range at 45°: round 150 mm Cutting range at 45°: square 150 x 150 mm Cutting range at 45°: flat 150 x 210 mm Cutting range at 60°: round 90.0 mm Cutting range at 60°: square 90 x 90 mm Cutting range at 60°: flat 90 x 100 mm Iedpexabbgjfx Ah Astr Saw blade dimensions: 2455 x 27 x 0.9 mm Cutting speed: 35 / 70 m/min Working height: approx. 900 mm Total power requirement: 1.2 kW Weight: 240 kg Dimensions (L x W x H): 870 x 1550 x 1740 mm Features: - Compact, robust manual band saw (HOBBY / INDUSTRIAL) * Suitable for cutting solid material and profiles - Mitre cuts up to 60° to the left possible - 2 selectable cutting speeds (37 and 74 m/min) - Infinitely variable feed rate of the saw bow - Automatic shut-off at the end of the cut - Manual quick-release vice, incl. quick-release lever - Machine base - Coolant system - Operating manual BERG SCHMID Auto-Cut-System = 3-step system: 1. Automatic lowering & automatic sawing operation 2. Manual operation – lowering & sawing operation 3. Rapid lowering mode of the saw frame – without sawing

Stanje: novo, Cutting range at 90°: round 255 mm Cutting range at 90°: square 240 mm Cutting range at 90°: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 – 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.63 t Space requirements approx. 1.8 x 1.85 x 1.85 m Mitre Band Saw, Fully Automatic GBS 250 Super VA-I MPS - Mitre left 45° in automatic mode - Mitre left 60° in semi-automatic mode (cuts without programming) - Impact-resistant and ergonomic control panel with oil-resistant EPDM cover - Material height sensor (automatic cutting start detection) - One-piece cast frame and gearbox for extremely quiet and low-vibration operation - Removable chip tray (easy cleaning/disinfection) - Excellent accessibility to saw, material, and feed unit - Hinged safety cover - Fine adjustment for feed rate - Semi-automatic cutting! Itodpfxsd Iip Ao Ah Aor Automatic sawing with microprocessor control Selectable for 2 programmable levels Semi-automatic operation Fully automatic operation Start cycle after input of desired quantity and material length: material approach, cutting, and piece counting until program fulfillment - MPS control system for input of required number of feed cycles - All essential machine data displayed on the LED display during the cutting process (current draw, cutting time, piece count) - Entered data is retained in RAM memory - The self-diagnostic circuit automatically displays any irregularities as error messages and monitors the entire process - Floating feed unit - Length adjustment using handwheel and vernier scale with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm or, using the reversing automatic, 1–29 repetitions, remnant length 210 mm

Stanje: novo, Cutting diameter: 250 mm Cutting range at 90°: square 210 x 210 mm Cutting range at 90°: flat 290 x 210 mm Cutting range at 45°: round 220 mm Cutting range at 45°: flat 210 x 200 mm Cutting range at 45°: square 200 x 200 mm Cutting range at 60°: round 140 mm Cutting range at 60°: square 130 x 130 mm Cutting range at 60°: flat 140 x 130 mm Saw blade dimensions: 2965 x 27 x 0.9 mm Cutting speed: 35 + 70 m/min Working height: 940 mm Total power requirement: 1.1 / 1.3 kW Machine weight approx.: 290 kg Dimensions (L x W x H): 1250 x 1500 x 1700 mm Iodpfx Ajxaauxsh Ajtr Features: - Compact / robust manual bandsaw (INDUSTRIAL) * Suitable for cutting solid material and profiles - Ball-bearing support table for mitre cuts from 60° left to 45° right * Durable and easy mitre adjustment - Two selectable cutting speeds (37 + 74 m/min) - Infinitely variable feed rate of saw bow - Automatic shut-off at the end of cut - Manually adjustable quick-release vice * Including quick-release lever - Machine base with integrated coolant system - Electrical monitoring and display of the machine - Operating manual BERG SCHMID Auto-Cut-System = 3-stage system 1. Automatic lowering & automatic saw cut 2. Manual operation – lowering & saw cut 3. Rapid lowering of saw frame without saw cut

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350 x 200 mm Saw band dimensions: 3375 x 27 x 0.9 mm Band speed: 18 – 110 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Space requirement: approx. 1.5 x 1.75 x 1.9 m Double-mitre metal bandsaw with AutoCut function - Mitre cuts up to 60° left and 45° right Itodpfxjnq Sanj Ah Aer - Ball-bearing rotary table - Side-adjustable clamping vice - Heavy-duty, large material support - Automatic coolant system Image shows semi-automatic version.

Stanje: novo, Cutting diameter: 185 mm Itedpfsvn Uzajx Ah Aor Saw band length: 2,085 x 20 x 0.90 mm Table height: 920 mm Band speed: 35 + 70 m/min Connection voltage: 400 V Total power requirement: 0.8 kW Machine weight: approx. 200 kg Berg & Schmid – Metal Band Saw GBS 185 Eco AutoCut Extremely fast and smooth cutting thanks to improved drive technology - Mitre cuts up to 60° to the left - Suitable for dry and wet cutting - Coolant system - Machine base

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table Isdpfx Ahsfd Abao Astr - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Stanje: novo, Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 – 90 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Required space: approx. 1.3 x 0.8 x 1.5 m SPECIAL PROMOTIONAL PRICE!!! (20347) Double miter metal band saw featuring: - Blade speed: 25 – 90 m/min - Miter cuts up to 60° left and 45° right Itsdpfofgyh Rjx Ah Aor - Ball-bearing turntable for quick miter adjustment - Sliding quick-release vise - Quick-clamping lever - Automatic coolant system

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2455 mm Itodjd Iip Tepfx Ah Aor Table height: 850 mm Cutting width: 230 mm Cutting speed: 25 - 80 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight: approx. 0.24 t Space requirement: approx. 1.2 x 0.6 x 1.7 m SPECIAL OFFER PRICE!!! -Mitre cuts up to 60° to the left -Cutting speed 25 - 80 m/min -Vice with quick-release mechanism -Carbide saw band guide -Band tension control -Electric coolant system Auto-Cut System = 3-stage system: -Automatic saw frame descent via hydraulic cylinder -Infinitely variable feed rate -With limit switch -Rapid descent of the saw frame from home position to workpiece, then switches to normal feed rate -Manual operation

Stanje: novo, Cutting diameter: 220 mm Saw band length: 2455 mm Table height: 850 mm Cutting width: 230 mm Cutting speed: 35 + 70 m/min Saw band dimensions: 2455 x 27 x 0.9 mm Cutting capacity at 60° round: 90 mm Cutting capacity at 60° square: 90 mm Cutting capacity at 60° flat: 90 x 100 mm Cutting capacity at 45° round: 150 mm Cutting capacity at 45° square: 150 mm Cutting capacity at 45° rectangular: 150 x 210 mm Cutting capacity at 90° round: 220 mm Cutting capacity at 90° square: 210 mm Cutting capacity at 90° rectangular: 230 x 185 mm Total power requirement: 1.2 kW Machine weight approx. 0.24 t Space requirement approx. 1.2 x 0.6 x 1.7 m SPECIAL PRICE!!! -Mitre cuts up to 60° left -Cutting speed 35 / 70 m / min -Vice with quick-release device -Carbide saw band guides -Band tension control -Electric cooling system Auto-Cut System = 3-stage system -Automatic saw frame lowering via hydraulic cylinder Ijdpod Iip Ujfx Ah Aetr -Infinitely variable feed adjustment -With limit switch -Rapid lowering of the saw frame from resting position to the workpiece, then switch to normal feed rate -Manual operation Freight charge: EUR 85,-

Stanje: novo, Cutting diameter: 240 mm Saw band dimensions: 2730 x 27 x 0.9 mm Table height: 920 mm Isdpfxsd Iip Ss Ah Ajtr Cutting speed: 35 + 70 m/min Cutting capacity at 90°, round: 240 mm Cutting capacity at 90°, square: 230 mm Cutting capacity at 90°, rectangular: 270 x 230 mm Cutting capacity at 45°, round: 210 mm Cutting capacity at 45°, square: 200 mm Cutting capacity at 45°, rectangular: 200 x 210 mm Cutting capacity at 60°, round: 130 mm Cutting capacity at 60°, square: 130 mm Cutting capacity at 60°, flat: 130 x 160 mm Total power requirement: 1.2 kW Machine weight approx.: 0.26 t Space requirement approx.: 0.9 x 1.6 x 1.74 m • Mitre cut left 60° • Quick-action vice with rapid clamping device • Quick-release handle for easy handling • Frame and gearbox are cast as a single unit, ensuring very quiet and low-vibration cutting • Electrical monitoring of blade tension and blade breakage, blade cover included • Carbide blade guides • Large machine bed • Machine base (delivered disassembled) with automatic coolant system The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic lowering of the saw frame by hydraulic cylinder; infinitely variable feed adjustment with limit switch at the end of the cut. High-speed lowering of the saw frame from home position to the workpiece, then switch to normal feed rate (e.g., for marking). Manual operation: Hydraulic cylinder acts as a brake cylinder (e.g., for notching). The brake cylinder allows the saw to be positioned in any position during the return stroke.

Stanje: novo, Leto izdelave: 2025, High-quality pallet truck with precise electronic scale and a lifting capacity of 2,500 kg. Equipped with double polyurethane rollers for stable, quiet, long-lasting, and trouble-free operation. This pallet truck is designed for transporting and weighing goods in warehouses, stores, on construction sites, or inside delivery vehicles. Its reliability and lightweight design make it an indispensable assistant for moving loads up to 2,500 kg. We offer a wide selection of pallet trucks to meet all your warehouse needs. Our pallet truck with integrated scale is an innovative solution that combines the functionality of a traditional pallet truck with an advanced weighing system. With this model, you can move and weigh goods simultaneously, significantly increasing workflow efficiency and saving valuable time. The pallet truck with scale is not only convenient but also highly accurate, ensuring precise weighing results with every use. Our pallet truck with scale is an excellent choice for companies that require reliable and efficient equipment for daily logistics operations. Pallet trucks with scales are perfect for various work environments, including warehouses, distribution centers, retail stores, and production facilities. Thanks to robust construction and easy operation, our pallet trucks are extremely durable and resistant to intensive use. The pallet truck with scale features a modern weighing system that allows for quick and accurate weighing of loads without the need for a separate scale. This not only simplifies warehouse processes but also minimizes errors and increases control over your inventory. Our pallet trucks with scales are available in various models, differing in capacity, features, and additional options, making it easy to match the device to your company’s specific requirements. By choosing our pallet trucks with scales, you invest in reliability and cutting-edge technology that help optimize your company’s logistics processes. We offer competitive pricing, professional guidance, and technical support at every stage of product use. Explore our range and discover how our pallet trucks with scales can improve efficiency and precision in your warehouse. Our company guarantees the highest quality pallet trucks with scales, manufactured using top-grade materials and the latest technologies. We care about customer satisfaction, offering products that are not only functional but also easy to maintain and long-lasting. Pallet trucks with scales are the perfect solution for those who value precision, efficiency, and reliability in warehouse operations. Contact us and browse our full range of pallet trucks with integrated scales. Display and scale features: - Illuminated display Itedpfsvvkynjx Ah Aor - Weighing accuracy +/-0.5 kg, Accuracy class – III - Large font - 6-digit display - Scale battery housed in a durable, steel enclosure - Charger included Technical parameters: Maximum load capacity: 2,500 kg Fork spread: 570 mm Fork length: 1,150 mm Fork width: 170 mm Length/width/height: 1,570 x 570 x 1,205 mm Weight: 89 kg

Stanje: dober (rabljeno), Leto izdelave: 1997, Prodajam dvosmerno potezno žago OMGA TI2500 Super. Dolžina reza: 230–2500 mm Itodpfextxh Djx Ah Ajr Maks. globina reza: 1500 mm Maks. višina reza: 115 mm Žagarski agregat: glavni žagin list + predrezovalni list na vsaki strani Popolnoma vrtljiva: od -45° do +45° 2 motorja po 4,0 kW (5,5 KM) V dobrem stanju. Takoj na voljo.