Gmx 250 Linear nakup rabljenega (13.223)

Stanje: dober (rabljeno), Leto izdelave: 2008, obratovalne ure: 72.899 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 07510001241, stružna dolžina: 1.185 mm, premer struženja: 640 mm, največja hitrost vretena: 12.000 obr/min, teža obdelovanca (maks.): 150 kg, skupna višina: 3.040 mm, skupna dolžina: 7.800 mm, skupna širina: 4.100 mm, skupna masa: 16.500 kg, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Read spindle hours: 39,361 - Swing diameter: 640 mm - Counter spindle turning diameter: 400 mm - Spindle distance: 1500 mm - Slide travel X1: 550 mm - Slide travel Y1: 180 mm - Slide travel Z1: 1185 mm - Slide rotary axis B1: 240 ° - Slide travel X2: 180 mm - Slide travel Z2: 1050 mm - Slide travel Z3: 1150 mm - Spindle speed range: 3200/4000 rpm - Rapid traverse speed slide 1 (X/Y/Z): 40/24/70 m/min - Rapid traverse speed slide 2 (X/Z): 24/36 m/min - Rapid traverse speed slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 positions Kwjdpfx Aboyaqczebet - Including tool holders mounted on the turret - Including bar feeder, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year: 2008, serial number: CNCDB-08.306, weight: 1500 kg Attention, the machine has the following defects: - The hydraulic unit is faulty and needs repair - The Q2 axis (tool changer milling spindle) fails frequently - X2 axis (guide rails) moves somewhat askew - The guides and drives exhibit age-related wear Note: For transport, a vehicle with a transport width of 3000 mm is required! FCA D-58256 Ennepetal, loaded onto truck on a date to be agreed at the end of February 2026.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.185 mm, premer struženja: 640 mm, največja hitrost vretena: 4.000 obr/min, premer struženja nad ležiščem sani: 640 mm, navor nasprotnega vretena (maks.): 5.000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between spindle heads: 1,500 mm SLIDE I X-axis travel: 550 mm Y-axis travel: 180 mm Z-axis travel: 1,185 mm B-axis: 240° X-axis feed rate: 0 - 40,000 mm/min Y-axis feed rate: 1 - 24,000 mm/min Z-axis feed rate: 1 - 70,000 mm/min B-axis feed rate: 1 - 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool holder: HSK 63 Milling spindle speed: 10 - 12,000 rpm Drive power 100% DC: 13.20 kW Drive power 40% DC: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 vacant stations: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-axis travel: 180 mm Z-axis travel: 1,050 mm X-axis feed rate: 1 - 24,000 mm/min Z-axis feed rate: 1 - 36,000 mm/min Kjdpfxjwyvc Uj Abbewt Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Powered tools - number: 12 Speed: 1 - 4,000 rpm Drive power 100% DC: 10.70 kW Torque S1: 32 Nm SLIDE III Z-axis travel: 1,150 mm Z-axis feed rate: 1 - 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 - 4,000 rpm Drive power 100% DC: 36.00 kW Drive power 40% DC: 45.00 kW Torque at 40% / 100% DC: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 - 5,000 rpm Drive power 100% DC: 21.00 kW Drive power 40% DC: 28.00 kW Torque at 40% / 100% DC: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total connected load: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Space requirement: approx. 8.50 x 4.50 x H3.10 m Control CNC control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG-Automation WH10top Main spindle ISM90: through-hole clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: partial through-hole clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Part extraction unit with integrated conveyor belt Automatic safety guard Differential pressure clamping With coolant pump frame: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck incl. collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 piece workpiece gripper for turret

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.185 mm, premer struženja: 640 mm, največja hitrost vretena: 4.000 obr/min, premer struženja nad ležiščem sani: 640 mm, navor nasprotnega vretena (maks.): 5.000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between spindle heads: 1,500 mm SLIDE I X-axis travel: 550 mm Y-axis travel: 180 mm Z-axis travel: 1,185 mm B-axis: 240° Kedpfoxf A Edox Abbewt X-axis feed rate: 0 - 40,000 mm/min Y-axis feed rate: 1 - 24,000 mm/min Z-axis feed rate: 1 - 70,000 mm/min B-axis feed rate: 1 - 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool holder: HSK 63 Milling spindle speed: 10 - 12,000 rpm Drive power 100% DC: 13.20 kW Drive power 40% DC: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 vacant stations: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-axis travel: 180 mm Z-axis travel: 1,050 mm X-axis feed rate: 1 - 24,000 mm/min Z-axis feed rate: 1 - 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Powered tools - number: 12 Speed: 1 - 4,000 rpm Drive power 100% DC: 10.70 kW Torque S1: 32 Nm SLIDE III Z-axis travel: 1,150 mm Z-axis feed rate: 1 - 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 - 4,000 rpm Drive power 100% DC: 36.00 kW Drive power 40% DC: 45.00 kW Torque at 40% / 100% DC: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 - 5,000 rpm Drive power 100% DC: 21.00 kW Drive power 40% DC: 28.00 kW Torque at 40% / 100% DC: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total connected load: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Space requirement: approx. 8.50 x 4.50 x H3.10 m Control CNC control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG-Automation WH10top Main spindle ISM90: through-hole clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: partial through-hole clamping device, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Part extraction unit with integrated conveyor belt Automatic safety guard Differential pressure clamping With coolant pump frame: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck incl. collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 piece workpiece gripper for turret

Stanje: rabljeno, Leto izdelave: 2007, Swing diameter 640 mm Maximum turning diameter 640 mm Control Siemens 840 D Powerline - - - - - Main spindle - - - - - - - - - - - Bar capacity 65 mm Chuck diameter 200 - 315 mm Spindle bore diameter 80 mm Main spindle front bearing diameter 120 mm --- Counter spindle --- Bar capacity 65 mm Chuck diameter 315 mm Spindle bore diameter 80 mm Front bearing diameter 120 mm - - - - - General Data - - - - - - - - - - - Spindle distance 1,500 mm Turning length 1,185 mm Main/counter spindle speed 5,000 rpm Driven tool speed 12,000 rpm Slide travel X1, Y1: 550 / 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm CNC Turning and Milling Centre | DMG GILDEMEISTER - GMX 250 linear with Main/counter spindle, chip conveyor, tool changer, turret set up for driven tools, and equipped with a gantry loading system (Pneumotec portal system S-01623a). Kjdovx U A Sspfx Abbewt The machine has only approximately 32,000 operating hours. The machine is in very good condition and can be inspected. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: GMX250linear | GMX-250 linear | GMX 250linear | GMX-250linear

Stanje: dober (rabljeno), Leto izdelave: 2003, stružna dolžina: 1.505 mm, Turning-milling center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power Line Technical specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs. Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK 63 Lower turret: Kwjdpfxjwzbq Tj Abbot X-axis: Z-axis: Driven tool speed: Number of turret stations: 12 pcs. Tool holder: VDI 40 Equipment/accessories: - Chip conveyor - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Counter spindle tailstock function - Automatic sliding doors

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 18.504 h, Splošni podatki Teža stroja: 20.000 kg Krmilna enota Proizvajalec: SIEMENS Model: Sinumerik 840D Powerline Glavni pogon Območje hitrosti vretena: 4.000 Število osi: 7 Pomiki Pomik X-osi: 550 mm Pomik Y-osi: 110 mm Revolver Število revolverjev: 1 Orodja Število pozicij v orodnem magazinu: 60 Število postaj na revolverju: 12 Največja dolžina orodja: 350 mm Tip držala orodja: HSK-A63 Dodatna oprema Odvod oljne meglice Rezervoar za hladilno tekočino s tračnim filtrom Notranji hladilni sistem s pritiskom 80 bar Približno 30 držal za orodja Ksdpfsx D S Dgox Abbewt Stroj DMG Gildemeister GMX 400 linear s 7 osmi, letnik 2004, omogoča največji premer struženja 640 mm in dolžino struženja 1.585 mm. Opremljen je z upravljanjem Sinumerik 840D Powerline, rezkalno vreteno z največjo hitrostjo 12.000 vrt/min ter orodnim magazinom do 120 pozicij. Če iščete vrhunsko zmogljivost kombiniranega stružno-rezkalnega stroja, razmislite o DMG Gildemeister GMX 400 linear, ki ga imamo na voljo. Za več informacij nas kontaktirajte. Uporabna področja Struženje

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 920 mm, pomik po osi Z: 820 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC530, skupna višina: 2.950 mm, skupna dolžina: 6.000 mm, skupna širina: 3.800 mm, širina mize: 900 mm, dolžina mize: 3.100 mm, vrtljajska hitrost (min.): 20 obr/min, največja hitrost vrtenja: 18.000 obr/min, skupna masa: 25.000 kg, hitrost vretena (min.): 20 obr/min, največja hitrost vretena: 18.000 obr/min, dovod hladilne tekočine: 40 letvica, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, X-os: 2500 mm Kodpfxoyac Tlj Abbswt Y-os: 920 mm Z-os: 820 mm Delovna miza: 3100 x 900 mm Vpenjalo vretena: SK/ISO40 Vrtljaji vretena: 20 - 18.000 1/min Menjalnik orodij: 30 kosov Krmilnik: Heidenhain iTNC 530 Opremljen z: - Transporter za ostružke - Hlajenje skozi vreteno 40 bar - Orodja ISO40 - Navodila za uporabo Država izvora: Nemčija Moč motorja: 35 kW Dimenzije stroja D x Š x V: 6000 x 3800 x 2950 mm Teža stroja: 25.000 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, obratovalne ure: 55.730 h, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik, obremenitev mize: 3.100 kg, skupna masa: 24.500 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 35.000 W, teža orodja: 6.000 g, število osi: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2002. It is a robust vertical machining center featuring a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on the Y- and Z-axes. The work table measures 3,100 × 900 mm and has a maximum load capacity of 3,100 kg. If you are looking for a high-quality milling machine, we recommend considering the DECKEL MAHO DMF 250 Linear that we offer for sale. Please contact us for further information. Additional Equipment • Safety features: Monitored and interlocked work area door; key switch for standard and setup mode; restricted functions when the door is open Machine Advantages Technical Machine Advantages • Feed rate: up to 20,000 mm/min • Clamping area: 3,100 × 900 mm • T-slots: 9 slots, 100 mm spacing • Tool magazine capacity: 30 positions • Measurement system resolution: 0.001 mm • Electrical connections: power supply 3N/PE~400/230 V, 50/60 Hz; power consumption 82 kVA • Pneumatics: compressed air 5.5–8 bar; air requirement 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29,280 kg Additional Information Ambient temperature: +15°C to +35°C Humidity: 20–75% Tool magazine size 120 - Magazine cabinet - Tool change via shuttle system - Tool holders available upon request and subject to availability (extra) - The machine is a 3-axis machine (rotary table not available) - Further configuration or the AB are no longer available. Kwsdpfx Abox Nr Tujbjt Z-axis brake defective, roll-up door in machine enclosure defective, shielded cable defective.

Stanje: rabljeno, Leto izdelave: 2004, obratovalne ure: 11.022 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 07520000211, stružna dolžina: 1.070 mm, premer struženja nad prečnim suportom: 400 mm, premer struženja: 560 mm, moč vretenovega motorja: 37 W, največja hitrost vretena: 4.000 obr/min, izvrtina vretena: 79 mm, potovalna razdalja osi X: 485 mm, pomik osi Y: 160 mm, največja hitrost vrtenja: 12.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included is a coolant treatment unit as well as a comprehensive selection of HSK 63 - A tools, approximately 40 tools in total. Also comes with a Berg chuck, see photos for details. The machine is being sold due to a lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading is possible without any issues. Kodpfjug Uc Nox Abbowt

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 2500 mm / 900 mm / 800 mm, Speed: 18,000 rpm, Spindle power: 35 kW, Max. table load: 3,000 kg, Tool stations: 30. Machine dimensions X/Y/Z: approx. 6,500 mm / 3,000 mm / 3,000 mm, Weight: approx. 20,000 kg, Control: Siemens Sinumerik 840D, Operating hours: 55,730 h, Spindle hours: 18,696 h. Z-axis brake defective, roller shutter in the machine enclosure defective, monitor cable defective. Includes Knoll VRF 250/1250 coolant system. Documentation available. On-site inspection possible. Kwodpfovamqdsx Abbjt

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, obratovalne ure: 53.500 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.500 mm, premer struženja nad prečnim suportom: 640 mm, premer struženja: 400 mm, največja hitrost vretena: 4.000 obr/min, izvrtina vretena: 107 mm, potovalna razdalja osi X: 550 mm, pomik osi Y: 220 mm, pomik po osi Z: 1.500 mm, skupna višina: 3.100 mm, skupna dolžina: 10.000 mm, skupna širina: 5.000 mm, skupna masa: 20.000 kg, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Manufacturer: DMG MORI Model: GMX 400 linear Year of manufacture: 2005 Operating hours: 53,500 h Spindle hours: 22,000 h Control system: Siemens 840D powerline Equipment: - 7 axes - Automatic tool changer (60 positions) - Swivel head as B-axis - 12-position tool turret as additional axis, VDI40 with 12 driven tools - Belt filter system with high-pressure coolant and chip conveyor Kwodpfx Aev Euhnjbbet Condition: - Machine fully operational - Geometry within manufacturer's tolerance for new machines - All wear parts replaced

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 57.588 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 07500000781, največja hitrost vretena: 12.000 obr/min, izvrtina vretena: 79 mm, premer nihanja nad prečno desko: 640 mm, premer vretena: 120 mm, višina središča: 1.343 mm, razdalja med središči: 1.930 mm, TECHNICAL DETAILS Centre height: 1,343 mm Centre distance: 1,930 mm Max. swing diameter: 640 mm Work spindle Spindle nose to DIN: Flat flange Size: 170 h5 Spindle diameter at front bearing: 120 mm Spindle bore: 79 mm Max. chuck diameter: 200 / 250 / 315 mm Max. torque 100/40% duty cycle: 270 / 390 Nm Stepless speed range: 20 to 4,000 / 12,000 rpm Turret Tool system: Disc turret / tool spindle Number of saddle slides: 3 Number of cross slides: 2 Longitudinal travel: z₁ = 1,585 mm / z₂ = 1,400 mm / z₃ = 1,500 mm Cross travel: x₁ = 550 mm / x₂ = 180 mm Tailstock Quill taper: MT5 Max. tailstock travel manual / automatic: 1,500 mm Feed speeds Rapid traverse longitudinal: Z₁ = 65 / Z₂ = 40 / Z₃ = 40 m/min Rapid traverse cross: X₁ = 40 / X₂ = 24 m/min Feed force longitudinal: Z₁ = 7.5 kN / Z₂ = 11 kN / Z₃ = 11 kN Feed force cross: X₁ = 7.5 kN / X₂ = 9 kN MACHINE DETAILS Kedpfxsww Hafe Abbewt Year of manufacture: 2005 Length: 8.9 m Width: 4.5 m Height: 3.1 m Weight: 24,000 kg Total power-on time: 102,104 h Spindle operating hours: 57,588 h

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 16.421 h, Upravljalna enota Znamka: HEIDENHAIN Model: iTNC530 Glavni pogon Območje hitrosti vretena: 18.000 min⁻¹ Stožčasta vpenjalka: BT40 Število osi: 5 Pomik Pomik po X-osi: 2.500 mm Pomik po Y-osi: 920 mm Pomik po Z-osi: 820 mm Ta 5-osni obdelovalni center DECKEL MAHO DMF 250 linear je bil izdelan leta 2006. Opremljen je z upravljalno enoto Heidenhain iTNC530, ponuja velike pomične zmogljivosti (X 2.500 mm, Y 920 mm, Z 820 mm) ter hitro vreteno s 18.000 obr/min. Stroj vključuje stožec vretena BT40, menjalnik orodij ATC s 30 mesti in polno CNC rotacijsko upravljanje po oseh A, B in C. Izkoristite priložnost za nakup tega univerzalnega obdelovalnega centra DECKEL MAHO DMF 250 linear. Za več informacij o stroju nas kontaktirajte. Kwjdjx D Igwjpfx Abbst Nameni uporabe Rezkanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Univerzalni 5-osni obdelovalni center DMG DMF 250 Linear Leto izdelave: 2006 Kwjdpfxsx Nmllj Abbjt Krmiljenje Heidenhain iTNC530 Hodi: X 2.500 mm, Y 920 mm, Z 820 mm NC rotacijski vpenjalnik – Hoffmann (os A) NC os B: -105 ~ 105 stopinj (glava vretena) NC os C: 360 stopinj Menjalnik orodij ATC s 30 mesti Vreteno: 18.000 vrt/min Stožec vretena: BT40 Neposredno merjenje na oseh X, Y in Z

Stanje: pripravljen za uporabo (rabljen), Festo EGSL-BS-55-250-5P / 562229 linearni pogon, serijska številka: 12081, rabljen, dobro ohranjen, 100% delujoč, obseg dobave v skladu s fotografijami. Kjdpfxjx Ernds Abbjwt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, premer struženja nad prečnim suportom: 390 mm, stružna dolžina: 2.250 mm, premer struženja: 610 mm, izvrtina vretena: 118 mm, največja hitrost vretena: 3.200 obr/min, potovalna razdalja osi X: 1.870 mm, pomik osi Y: 210 mm, pomik po osi Z: 240 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Krmiljenje Siemens Sinumerik 840D. CNC stružno-rezkalni center z glavnim in protivretenom za učinkovito 4-osno popolno obdelavo čeljustnih, palicnih ali grednih delov. Ksdpfx Ajw Ngmhobbjwt

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, potovalna razdalja osi X: 2.500 mm, Oprema: dokumentacija / priročnik, Wittmann W828 Euromap 67 X= 1105 mm Y= 1200 mm Z= 2500 mm Vakuum: 2 Število osi: 3 Doseg: 2500 mm Nosilnost: 5 kg Kwodpfjw I Dzgox Abbot

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, vpenjalna sila: 2.500 kN, Oprema: dokumentacija / priročnik, Krauss Maffei KM250-1400CX (2014) Clamping force: 250 t Screw diameter: 60 mm Tie bar distance: 630x630 mm Injection weight: 471 g (PS) Injection volume: 518 cm³ Type: Horizontal Drive: Hydraulic Clamping Unit 1. Clamping force: 2500 kN 2. Platen size (H × V): 695 × 1050 mm 3. Tie bar distance: 630 × 630 mm 4. Max. opening stroke: 630 mm 5. Mold height (min./max.): 320 / 830 mm Injection Unit 1. Installed drive power: approx. 87 kW 2. Screw diameter: 55 / 60 / 70 mm 3. Injection pressure: 2387 / 2006 / 1473 bar 4. Injection volume: 417 / 518 / 679 cm³ 5. Shot weight (PS): 379 / 471 / 618 g 6. Injection stroke: 210 mm 7. Max. injection speed: 120 mm/s Ejector System 1. Ejector stroke: 180 mm 2. Ejector force: 78 kN General Data 1. Machine dimensions (L × W × H): approx. 6.1 × 2.2 × 2.2 m 2. Machine weight: approx. 14.0 - 14.3 t 3. Total connected load: 87 kW 4. Hydraulic oil capacity: approx. 700 L _Machine Equipment:_ 1. BluePower servo pump drive system (energy-efficient servo hydraulics) 2. Hydraulic core pull 1× on operator side + pressure relief system 3. 8-circuit water manifold with solenoid valve shutoff 4. Hot runner control, 4 zones (ZE 88.5404) Kwjdjxqhfyepfx Abbet 5. MC6 control system with 19″ touchscreen TFT display 6. PV control for injection speed, hold pressure, back pressure 7. Event log / quality monitoring / cycle analysis / maintenance reminders 8. Energy-saving servo drive system BluePower LRX 150 Linear Robot (Payload &lt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, skupna masa: 35.000 kg, stiskalna sila: 250 t, vrsta vhodnega toka: trifazni, moč: 30 kW (40,79 KM), prebijalna sila: 250 t, vhodna napetost: 200 V, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Press Force: 160t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Clearance Over Table: (adjustable) 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30kW – Japanese standard Kwodpfx Asu Dxb Tjbbjt Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optional with Decoiler and Straightener.

Stanje: generalkompletno obnovljen (rabljeno), kapaciteta baterije: 500 Ah, napetost baterije: 80 V, skupna višina: 627 mm, skupna dolžina: 1.025 mm, skupna širina: 708 mm, Tested forklift battery for your forklift – 80V 4PZS 500Ah – DIN A + 1 year warranty + including Aquamatic system + including end cable & REMA 320 connector (other connectors can be installed upon request) + Capacity: min. 90–100% (C5 capacity protocol supplied upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,025 mm Width 708 mm Height 627 mm Weight: approx. 1,210 kg Suitable for the following models and more: Linde E 16 P - 386-02 - side battery change Kwedpfx Ajwzvzyebbet Linde E 20 - 1252-01 Linde E 20 - 336-00 Linde E 20 - 387-00 Linde E 20 FLAT - 336-00 Linde E 20 L - 386-00 Linde E 20 R - 387-00 Linde E 25 - 1252-01 Linde E 25 - 387-00 Linde E 25 C - 387-00 Linde E 25 R - 387-00 Linde E 25 RL - 387-00 Linde E 25 S - 1276-00 Linde E 30 - 1252-01 Linde E 30 - 387-00 Linde E 30 - 387-00 - side battery change Linde E 30 / 500 - 387-00 Linde E 30 C - 387-00 Linde E 30 L - 387-00 - side battery change Linde E 30 R - 387-00 Linde E 30 RL - 387-00 Linde E 30 S - 1276-00 Linde P 200 - 370-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 - side battery change Linde P 250 SWB - 5007-10 - vertical battery change Linde W 20 - 127-00 Linde W 20 - 127-00 - vertical battery change Linde W 20 - 127-06 - top battery change Linde W 20 - 5007-10 - side battery change Linde V 20 - 5007-10 - vertical battery change Linde W 30 - 5007-10 - side battery change Linde W 30 - 5007-10 - vertical battery change Toyota 7FBMF16 Toyota 7FBMF18 Atlet EH 25 Clark STE 20 Common battery sizes are available, please inquire. Transport available.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, TETRA PAK A3 COMPACT FLEX 200/250 EDGE CELOVITA LINIJA VKLJUČUJE: 1. TETRA PAK A3 COMPACT FLEX QUICK CHANGE 200/250 EDGE POLNILNIK V200, leto izdelave 2010 15.120 delovnih ur Kapaciteta 9.000 kartonov na uro 2. TETRA PAK ACHX 10-0400-44 HELIX AKUMULATOR KARTONOV V400, leto izdelave 2010, 17.431 delovnih ur 3. TETRA PAK STRAW APPLICATOR TS30 U-FORM NADGRAJEN V300, leto izdelave 2010 4. TETRA PAK APPLICATOR CAP30 FLEX PRO23 V200, leto izdelave 2010, 10.914 delovnih ur Kedpfxjya Nf Is Abbjwt 5. TETRA PAK FILM WRAPPER 32 V400, leto izdelave 2010, nikoli uporabljen, samo 45 ur! 6. TETRA PAK CARDBOARD PACKER CBP 32 V400, leto izdelave 2010, wrap around 7. TETRA PAK LINE CONTROLLER LC30+ 8. TRANSPORTNI SISTEM 9. VKLJUČEN TISKALNIK VIDEOJET 1620 LINIJA JE V STANJU KOT NOVA. LOKACIJA – ŠVEDSKA. TAKOJ PRIPRAVLJENA ZA DEMONTAŽO IN POŠILJKO. CENA PO POVPRAŠEVANJU.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Hoerbiger Origa P120S-25 linearni aktuator. V dobrem delovnem stanju. Kwedetwqp Aepfx Abbjt Oglejte si tudi naše druge oglase.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Koganei ORGA40X2750 linearni aktuator. V dobrem delovnem stanju. Oglejte si tudi naše druge oglase. Kjdpfx Ajtwqqgsbbjwt

Stanje: rabljeno, Gildemeister GMX250 Kwodpfjx Up A Djx Abbet

Stanje: zelo dobro (rabljeno), Kataloška številka: 7548 TEHNIČNI PODATKI širina gosenice: 250 mm širina valja: 250 mm max. premer diska: 350 mm premer odprtine diska: 80 mm maks. višina reza: 120 mm širina mize z odprtino: 700 mm dolžina mize: 1790 mm *z zgoraj: zaporke pritisni valj, gladek zaporke pritisni valj, gladek valj z žagami gladi pritisni valji: 2 kos eze: vodilo drseči valj, gladek zaporke gosenica centralno mazanje pogonski motor: 1,1 kW glavni motor: 30 kW električno dviganje ohišja ročni dvig valja z žagami premer izsesovalnega nastavka: 160 mm skupne mere dolžina/širina/višina: 2250x1700x2000 mm teža cca: 3000 kg – nemška proizvodnja – električno dviganje ohišja in valja – brezstopenjska regulacija hitrosti pomika – rabljena večlistna žaga, zelo dobro stanje Kodjyaq Hgspfx Abbjwt Neto cena: 68.900 PLN Neto cena: 16.400 EUR po tečaju 4,2 EUR (Cene se lahko spremenijo ob večjih nihanjih tečaja)