Hedelius nakup rabljenega (37)

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, Krmiljenje Heidenhain TNC426, Orodni nosilec SK40, Transporter ostružkov Guedpfx Ahexl Tiye Dsh

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 650 mm, pomik po osi Z: 520 mm, CNC control Heidenhain iTNC530 NC rotary-swivel table on the right Fixed table on the left 30-position tool changer Electronic handwheel ICS (internal coolant supply) 20 bar Chip conveyor Technical details: X-axis travel: 1200 mm X-axis travel, rotary-swivel side: 500 mm X-axis travel, fixed table side: 570 mm Y-axis travel: 650 mm Gusdpfx Ahetu S Irs Djh Z-axis travel: 520 mm A-axis: +90° / -110° C-axis: 360° Spindle taper: SK40 Spindle speed range: 30–8000 rpm Feed rate: 0–45000 mm/min Swivel rotary table dimensions: 520 x 420 mm Interfering edge diameter: 610 mm Height of support bearing: 90 mm Fixed table dimensions: 700 x 600 mm Number of tool stations in tool changer: 30 Drive capacity: 22 kW Weight (approx.): 8,500 kg Technical data, accessories, and machine description are not binding.

Stanje: dober (rabljeno), Leto izdelave: 2007, Ref. č.: 10473 Proizvajalec: HEDELIUS Tip: C60 - 2000 Leto izdelave: 2007 Vrsta krmiljenja: CNC Krmilni sistem: Heidenhain iTNC 530 Lokacija skladišča: Halberstadt Država izvora: Nemčija X-hod: 2000 mm Y-hod: 620 mm Z-hod: 520 mm Višina mize: 860 mm Maks. teža obdelovanca: 2000 kg Maks. dolžina orodja: 330 mm Maks. premer orodja: 80/125 mm Vpenjalna površina: 2500 x 600 mm Širina T-utorov: 18 mm Razmak T-utorov: 100 mm Število mest za orodja v magazine: 30 Območje vrtljajev vretena - brezstopenjsko: 30 - 8000 min⁻¹ Maks. navor: 198 Nm Hitri pomiki X/Y/Z: 45000 mm/min Število radialnih T-utorov: 5 Dolžina stroja: 5400 mm Širina stroja: 3300 mm Višina stroja: 3000 mm Približna teža stroja: 10,5 t Dodatne informacije: Razdalja vreteno - miza: 100 - 620 mm Guodpsxc Ttajfx Ah Djh Vpenjanje orodja: krožna vzmet Stroj si je možno po predhodnem dogovoru ogledati pod električno napetostjo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, x-hod: 1800 mm y-hod: 520 mm z-hod: 520 mm Krmiljenje iTNC 426-M Število vrtljajev vretena: 8000 min⁻¹ Hitri pomiki x/y/z: 30 m/min Orodniški vpenjalni stožec: SK 40 Obremenitev mize: 3 t Orodniška revija z 30 mesti Motor vretena: 22 kW Navor na vretenu: 220 Nm Teža stroja pribl. 9 t Gedpfx Ajxg R Hrjh Douh 3-osni vertikalni obdelovalni center Hedelius, model BC 40 D/20 s krmiljenjem Heidenhain iTNC 426-M. Gre za rabljeno napravo, zato prodaja poteka brez kakršnegakoli jamstva. TRGOVEC Z ZALOGO IN RAZSTAVNO DVORANO 1600 m².

Stanje: rabljeno, Leto izdelave: 2012, x-hod 2500 mm y-hod 620 mm z-hod 520 mm Krmilnik Siemens 840 D Shop Mill Upalna površina mize 3000 x 600 mm Hitro pomikanje 45 m/min Območje vrtljajev 18000 vrt/min Pogonska moč - rezkalno vreteno 13,7 kW Orodni nosilec HSK 63 A Število orodij v magazinu 30 kos Teža stroja cca 9,0 t Dimenzije D x Š x V 8,3 x 4,2 x 3,6 m Vertikalni obdelovalni center z gibljivim stojalom. - Transporter za ostružke - Zunanji ročni kolešček - 3D tipalo - Notranji dovod hladilne tekočine 80 bar - Trakasti filtrirni sistem Gujdpfow Np A Sex Ah Djh - Električne žaluzije za nalaganje s pomočjo žerjava - 1x naprava za odsesavanje oljne megle

Stanje: rabljeno, Leto izdelave: 2005, x-travel: 2,000 mm y-travel: 620 mm z-travel: 520 mm Guedpfx Asvnvz Ijh Deh Control: iTNC 530 Heidenhain Spindle speed range (main spindle): 30 - 12,000 rpm Torque: 121 Nm Drive power (main spindle): 21 kW Tool holder: SK 40 Table clamping surface: 2,500 x 600 mm Max. table load: 2,000 kg Number of T-slots: 5 T-slots: 18 H8 Number of tool stations: 30 positions Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent pocket: 125 mm Max. tool length: 330 mm Max. tool weight: 8.5 / 15 kg Chip-to-chip time: 6.0 sec Tool change time: 3.0 sec Total power requirement: 25 kVA Machine weight approx.: 10.5 t Space requirement approx.: 8.0 x 4.0 x 3.5 m Vertical machining center HEDELIUS - C 60 / 2000 - Spindle hours: approx. 12,045h - Hofmann RT 320 NC rotary table - Center height: 220 mm - Max. speed: 22 rpm - Drive torque: 500 Nm - Weight: 135 kg - Hofmann RE-40 / 220 tailstock - Mount: MK 3 - Quill stroke: 40 mm - Center height: 220 mm - incl. 2x chucks - incl. replacement pump - incl. jaws - WITHOUT clamping devices, WITHOUT tools

Stanje: rabljeno, Leto izdelave: 2008, x-premik 2.500 mm y-premik 1.000 mm z-premik 770 mm Krmiljenje Heidenhain iTNC 530 Hitrost vretena 12.000 obr/min Priklop orodja SK 40 Število orodnih mest 30 pozicij Obratovalne ure pribl. 61.629 ur Ure vretena pribl. 33.186 ur Po naši oceni je stroj v dobrem rabljenem stanju in ga je mogoče po dogovoru ogledati pod napetostjo. Gedpfjxgicrex Ah Dsuh Tehnične lastnosti & dodatna oprema: - ročno kolo - notranje hlajenje z visokim pritiskom, 25 bar z tračnim filtrom - izpiralna pištola - pištola na stisnjen zrak - popolna ohišja - sprejemnik Dodatna oprema, prikazana orodja in vpenjalne naprave so priložene samo, če je to navedeno v dodatnih informacijah. Spremembe in napake v tehničnih podatkih in informacijah ter vmesna prodaja pridržane!

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 002840, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 520 mm, pomik po osi Z: 520 mm, skupna masa: 9.000 kg, - Letnik izdelave: 2000 - Prvi lastnik in lastna uporaba - Popolnoma delujoče, pod napetostjo, pripravljeno za demonstracijo - Krmiljenje: Heidenhain TNC 426 - Magazin za orodje: 30 mest - Pomik X-os: 1800 mm - Pomik Y-os: 520 mm - Pomik Z-os: 520 mm - Nihajno delovanje: 2 x 700 x 520 mm - Visokotlačna tračna filtrirna naprava / IKZ - Dovod hladilne tekočine skozi vreteno: 20 bar - Križni tračni transporter: 50 x 1800 Gujdpfxexgq A Te Ah Djh Neto cena, neiztovorjeno na lokaciji Luckenwalde (Nemčija), brez transporta

Stanje: dober (rabljeno), Leto izdelave: 2008, Ref.-No.: 10581 Manufacturer: HEDELIUS Model: RS 80 Magnum Year of manufacture: 2008 Control type: CNC Control system: HEIDENHAIN iTNC 530 Location: Halberstadt Country of origin: Germany X travel: 945 mm Y travel: 800 mm Z travel: 600 mm C-axis: 360,000 x 0.001° Spindle taper: ISO 40 Table load capacity: 600 kg Tool changer: 30 stations Spindle speed: 10 – 8,000 rpm Spindle motor power: 27 kW Total power requirement: 55 kW Approx. machine weight: 16 t Godpjxdaz Hjfx Ah Deuh A-axis (swivel axis): — Table clamping area: 800 x 630 mm Additional information: - Pendulum machining with pivoting rotary table and fixed machine table - Coolant system, chip conveyor - Full enclosure The machine can be inspected under power by arrangement.

Leto izdelave: 2008, Stanje: rabljeno, x-travel 2000 mm y-travel 620 mm z-travel 520 mm Table size 2500 x 600 mm Max. workpiece weight 2000 kg Tool holder SK40 Control system HEIDENHAIN Spindle speeds 30 - 8000 rpm Feed rate 45 m/min Rapid traverse 45 m/min Total power requirement 20 kW Machine weight approx. 10,500 kg Space requirement approx. 5400 x 3300 x 3000 mm Gusdpsulnbkofx Ah Deh Equipment: - Heidenhain iTNC 530 control - Tool magazine with 30 stations - Chip conveyor - Sieve filtration system with ICS (internal coolant supply) - Operating manual Optional (on request): - Radio probe (Heidenhain) - Tool measurement system (Heidenhain TT 160)

Stanje: rabljeno, Leto izdelave: 2008, x travel 1200 mm y travel 620 mm z travel 520 mm Control: Heidenhain iTNC 530 Table clamping surface: 1550 x 600 mm Table load capacity: 1500 kg Rapid traverse: 45 m/min Speed range: 8,000 rpm Tool holder: SK 40 Number of tools in magazine: 30 pcs Machine weight approx. 9.0 t Guodpowc Dyysfx Ah Deh Dimensions (L x W x H): 5.1 x 2.6 x 2.85 m Vertical travelling column machining center. - Chip conveyor - External electronic handwheel - 3D probe - Coolant gun

Stanje: dober (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 770 mm, nazivna (navidezna) moč: 55 kVA, največja hitrost vrtenja: 5.000 obr/min, Hedelius Machining Center Model: BC100-3500 If you are interested, please get in touch. My listing on the machinery platform expires at the beginning of November. Condition: Used but in very good shape Control: Heidenhain iTN530, Version: 340490 02 SP9 Travel paths: X – 3500 mm, Y – 1000 mm, Z – 770 mm Rapid traverse (X, Y, Z axes): 30 m/min on all axes Spindle: SK50 Max. spindle speed: 5000 rpm Spindle motor: 55 KW External cooling system Internal cooling through the spindle, compressed air through the spindle External compressed air via nozzle Chip conveyor with band filter system, 780 liters Electronic handwheel Partition wall for pendulum operation Renishaw wireless touch probe Electronic handwheel Spindle runout: 0.002 mm at 300 mm Spindle length deviation at 300 mm: 0.003 mm In December 2021, internal compressed air through the spindle was retrofitted. Pickup tool changer preparation Replacements/Upgrades: Y-axis: bearings, belts, and other accessories replaced TFT monitor replaced with industrial TFT LCD monitor with integrated keyboard for Heidenhain Internal compressed air for spindle SK50 retrofitted Z-axis ballscrew completely replaced including all accessories in 2024 Temperature sensor Rotary union Spindle module Machine will be available around mid-October. I am a former Hedelius service technician and can prepare the machine for transport and assist with loading. Machine location: [please specify location] My listing on Machineseeker is valid until 06.11.2025, when my membership will end. Gjdpfx Ahsw Td T Ho Dsuh

Stanje: rabljeno, Leto izdelave: 1998, x-hod 1700 mm y-hod 400 mm z-hod 400 mm Površina stola za stezanje 2x 1100 x 420 mm Nosivost stola 500 kg Prihvat alata SK 40 Upravljanje Sinumerik 810 D Siemens Opseg obrtaja vretena 30 - 6000 o/min Magacin alata sa 20 mesta Gsdpexddq Sofx Ah Douh Brzina pomaka 1 - 30000 mm/min Brza vožnja osa x / y / z 30 / 30 / 30 m/min Ukupna potrebna snaga 20 kW Težina mašine cca 5 t Prostorne dimenzije cca 3,8 x 2,8 x 3,1 m 3-osna vertikalna obradački centar Hedelius, mod. BC 40 D/20 sa Siemens Sinumerik 810 D. Radi se o polovnom predmetu, prodaja isključuje svaku vrstu garancije. DILER SA ZALIHAMA, IZLOŽBENI PROSTOR 1600 m².

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, X travel: 2500 mm Y travel: 800 mm Z travel: 750 mm Control: HEIDENHAIN TNC430i Table size (lengthwise): 3220 mm Table size (crosswise): 800 mm Tool holder: ISO SK40 Spindle speed: 15,000 rpm Connected load: 25 kVA Tool changer: 40 positions Machine weight: approx. 20 t Space requirements: approx. 6.5 x 3.8 x 3.7 m This HEDELIUS BC80 is in good condition and can be inspected under power by arrangement with the seller. Description: Model: Hedelius BC80 Type: 4-axis machining center Control: Heidenhain TNC430i Year of manufacture: 2000 X-axis travel: 2500 mm Y-axis travel: 800 mm Z-axis travel: 750 mm Clamping area table: 3220 x 800 mm Tool holder: SK40 Tool changer: 40 stations Spindle power: 10 kW S1 / 15 kW S6 Spindle speed: 50 to 15,000 rpm Total connected load: 25 kVA Special equipment: - Partition for pendulum machining - Internal coolant supply - 4th axis Hoffmann with counter bearing, hydraulically clamped - Belt filter - Scraper belt chip conveyor - Rinsing guns - Tool measurement system Renishaw TS27R - Workpiece measurement system Renishaw infrared Gjdpfx Ajxa Hl Deh Dsuh - Ethernet connection - Manual control module Miscellaneous: - Ball screws on X and Y axes replaced in 2018 - Complete documentation available Machine weight: approx. 20 t Footprint: 6.5 (width) x 3.8 (depth) x 3.7 m (height)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, High-Performance Gantry-Type Machining Centre – 3-Axis Only 917 spindle hours (as of July 2025) Manufacturer: HEDELIUS Model: FORTE 65 Single Year of manufacture: 2022 Control: Heidenhain TNC 640 F Tool holder: SK40 Operating hours, approx. (as of July 2025): Spindle run time: 917 h Program run time: 1,119 h Machine power-on time: 3,675 h Gusdpow U Egdofx Ah Djh TECHNICAL DATA: 3 axes Travel (X, Y, Z axes): 1,320 mm, 650 mm, 600 mm Feed rates X, Y, Z axis: 0–40 / 40 / 40 m/min Spindle power: 29 kW / 183 Nm Spindle speed: 50–14,000 rpm EQUIPMENT: ZeroClamp zero-point clamping system, 6/4-position for Forte 65, 120 mm diameter IKZ internal coolant supply, 25 bar Inclined bed belt filter system, 900 l LTA 3001 extraction filter (1,200 m³/h) Blow-off pistol Rinsing gun Infrared receiver M&H 91.40 TNC 640 3D infrared probe M&H 25.50 Internal compressed air supply through main spindle via M function (5 bar) 65-slot tool magazine Fixed machine table Scraper-belt chip conveyor Heidenhain direct length measuring systems Spindle chiller Automatic central lubrication for X, Y, Z axes Work area illumination Precision-ground ball screws Control cabinet air conditioning unit Spindle cooler Coolant supply semi-circularly arranged around the spindle New price over EUR 250,000 This used machine can be inspected under production conditions. All information provided is without guarantee – sold excluding any warranty or guarantee. Subject to prior sale.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, x-Pomak 700 mm y-Pomak 650 mm z-Pomak 600 mm Težina mašine cca 7500 kg Mašina je u izuzetno dobrom stanju i omogućava preciznu 5-osnu obradu sa velikim radnim područjem, visokim radnim performansama glavnog vretena i obimnim magacinom alata. Idealno za zahtevne radove glodanja i bušenja – sve tehničke detalje možete pronaći u nastavku. HEDELIUS ACURA 65 5-osni simultani centar za obradu Poziciona tačnost: A=8 µm/1000 mm Heidenhain iTNC640 X osa: 700 mm Y osa: 650 mm Z osa: 600 mm Dimenzije rotaciono-nagibnog stola: Ø 650x540 mm Opseg nagiba: +30° – -115° Gedpfxowmwxqo Ah Douh Maks. opterećenje rotaciono-nagibnog stola: 500 kg Promer smetajućeg kruga: 500 kg Vreteno: 14.000 o/min – SK40 Broj mesta u izmjenjivaču alata: 65 kom Broj mašine: 30056107 Godina proizvodnje: 2020 tip: ACURA 65 - 40/640/700/12

Stanje: rabljeno, Leto izdelave: 2005, X travel 2000 (775 + 600) mm y travel 620 mm Z travel 520 mm Control Heidenhain iTNC 530 Spindle speed range main spindle 12,000 rpm Main spindle drive power 18 kW Table clamping surface 1,200 x 600 mm Rotary table diameter Ø 500 mm tiltable +15/-95 ° rotatable 0–360 ° Max. table load 1000 / 350 kg Tool holder SK 40 Number of tool positions 30 pos. Internal coolant supply 20 bar Rapid traverse (X / Y / Z) 30 m/min Dimensions L x W x H 5.0 x 2.5 x 3.3 m Machine weight approx. 11 t Universal CNC machining center with 5 axes and fixed table in pendulum operation, overhauled for €60,000. - NC rotary tilting table in the right working area - Fixed table in the left working area - 4th axis on fixed table, 165 mm center height Guodpfxjxbh D Dj Ah Djh - Internal coolant supply - Double cartridge filter - Chip conveyor - Partition wall for pendulum operation - External handwheel - KinematicsOpts - 3D probe IR - Oil mist extraction unit - Motorized "rolling roof" above the machine - Full overhaul in 2022/2023 for €60,000 (all guideways and ball screws replaced) - Pendulum mode - Initial commissioning 2006 - Replacement spindle installed in 2016 at approx. 21,000 spindle hours.

Stanje: rabljeno, Leto izdelave: 2018, x-travel 3200 / 2630 mm y-travel 750 mm z-travel 695 / 800 mm Control: Heidenhain TNC 640 Swivel range: -98 to 98 degrees Rotary table diameter: 750 mm Total power consumption: 29 kW Machine weight approx. 16 t Hedelius travelling column machining centre Tiltenta 7 Magnum with infinitely adjustable main spindle, 5-axis CNC control Heidenhain TNC 640, 22.0 kW/117 Nm main spindle drive 50-12000 rpm, 50-position tool magazine and NC rotary table integrated in the fixed machine table. Machine features: T7M-3200, operating mode 3 - High-pressure pump 50 bar - Heidenhain TNC 640-T series - Spindle speed 12,000 rpm / 29.0 kW - Extended swivel range TNC/T - Remote control HR 510 - Standby magazine SK40/190 - Taper cleaning station - Slant-bed coolant system 900 l - Internal coolant supply 25 bar - Pre-filter for slant-bed coolant system - Electrostatic exhaust filter T / 2x1300 - Compressed air nozzle at spindle head - Internal compressed air supply - Blow-off guns - Rinsing guns - Infrared receiver M&H 91.40 - 3D infrared measuring probe M&H 25.50 - Tool setter M&H 35.70 - Work area partition T7 with sliding door Control on: 33163:56:22 Machine on: 24185:07:21 Program runtime: 16784:12:57 Gedpewfqqksfx Ah Djuh Spindle: 11751:13:08

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, obratovalne ure: 56.860 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 800 mm, pomik osi Y: 620 mm, pomik po osi Z: 520 mm, proizvajalec krmilnikov: Siemens, model krmilnika: 840 D, delovne ure vretena: 28.100 h, število mest v zalogovniku orodij: 30, The machine can be inspected under power at any time. The spindle was replaced at approximately 5,500 operating hours. The control unit was replaced (PCU50) in March 2024. Gsdpfxevncmks Ah Deuh Our Hedelius is in very well-maintained condition.

Stanje: dober (rabljeno), potovalna razdalja osi X: 2.300 mm, pomik osi Y: 630 mm, pomik po osi Z: 810 mm, Manufacturer: Hedelius Type: Tiltenta T6-2300 Control: Heidenhain iTNC530 Year of manufacture: 2005 Optional NC Rotary Table Working area: 750 x 550 mm Table load: 800 kg Table torque: 1600 Nm Table rotation speed: 22 rpm 2 x 850 mm pendulum operation Heidenhain HR 410 handwheel Heidenhain iTNC530 Specifications Metric X-axis: 2300 mm Y-axis: 630 mm Z-axis: 810 mm A-axis: -92° to +92° B-axis: 360.000° Table length: 2900 mm Table width: 630 mm Table load: 2000 kg X-axis feed rate: 60,000 mm/min Y-axis feed rate: 60,000 mm/min Z-axis feed rate: 60,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 26.5 kW Spindle speed: 12,000 rpm Tool changer: 40 positions Through-spindle coolant: 20 bar Number of controlled axes: 5 Chip conveyor: Yes Guedpfewrq Upsx Ah Dsh Coolant system: Yes Dimensions (approx.): Length: 7500 mm Width: 3250 mm Height: 3250 mm Weight: 16,800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but its accuracy cannot be guaranteed. Accordingly, no representation or contractual obligations are created. We recommend verifying all critical details.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 026375, potovalna razdalja osi X: 2.000 mm, pomik osi Y: 620 mm, pomik po osi Z: 520 mm, teža obdelovanca (maks.): 2.000 kg, TECHNICAL DETAILS Travel range X-axis: 2,000 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Gjdpfx Ahjwtq Tue Dsuh Rapid traverse X-Y-Z: 30 - 30 - 30 m/min Table size: 2,500 x 600 mm Maximum load capacity: 2,000 kg MACHINE DETAILS Weight: 10,500 kg Voltage: 400 V Frequency: 50 Hz Total connected load: 25 kVA

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 650 mm, pomik po osi Z: 520 mm, največja hitrost vretena: 8.000 obr/min, število mest v zalogovniku orodij: 30, Kot zasuka osi A (min.): −110 °, zasukni kot osi A (maks.): 90 °, 5-Axis Machining Center Hedelius TECHNICAL DETAILS Control: CNC Heidenhain iTNC 530 X-axis travel: max. 1,200 mm Y-axis travel: max. 650 mm Z-axis travel: max. 520 mm Rotary/swivel travel in X: max. 500 mm Fixed machine table area travel in X: max. 570 mm A-axis: +90° / -110° C-axis: 360° Tables Swivel rotary table dimensions: 520 × 420 mm Maximum interference diameter: 610 mm Fixed table dimensions: 700 × 600 mm Spindle and Tooling Spindle taper: SK 40 Speed range: 30 – 8,000 rpm Drive power: 22 kW Gsdpfx Ahsu Sqtqe Douh Tool changer: 30 stations MACHINE DETAILS Machine weight: approx. 8,500 kg Dimensions: 3,600 × 2,650 × 2,800 mm EQUIPMENT - NC rotary-swivel table, right - Fixed table, left - Electronic handwheel - Through spindle coolant (20 bar) - Chip conveyor

Stanje: rabljeno, Leto izdelave: 2011, Travel path - X axis: 570 / 500 (1,070) mm Travel path - Y axis: 650 mm Travel path - Z axis: 530 mm Control: HEIDENHAIN iTNC 530 Spindle speed: 12,000 rpm Tool holder: SK40 5-axis machining centre | HEDELIUS RS605 K IC equipped with tool changer, internal coolant supply (50 bar), zero-point clamping system, and chip conveyor. Gedpfxswlvrao Ah Douh The machine has only 7,863 spindle hours. A comprehensive tool package is included in the scope of delivery. The machine is in well-maintained condition. For further equipment details, please refer to the original order confirmation attached to the offer. #Tags: RS605 K IC 40 | RS-605 | RS 605

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.220 mm, pomik osi Y: 800 mm, pomik po osi Z: 600 mm, hitro pomikanje X-os: 40 m/min, hitri pomik os Y: 40 m/min, hitri pomik na osi Z: 40 m/min, model krmilnika: Heidenhain, skupna višina: 3.600 mm, skupna dolžina: 7.500 mm, skupna širina: 4.200 mm, širina mize: 750 mm, dolžina mize: 3.900 mm, obremenitev mize: 3.500 kg, skupna masa: 15.500 kg, hitrost vretena (min.): 30 obr/min, največja hitrost vretena: 18.000 obr/min, razdalja od središča mize do nosu vretena: 720 mm, moč vretenovega motorja: 35 W, število mest v zalogovniku orodij: 55, dolžina orodja: 330 mm, premer orodja: 80 mm, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Mobile column vertical machining center "HEDELIUS model CB80 MAGNUM" with Heidenhain TNC-530 Gjdpfsv Sdc Ujx Ah Dsuh

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 3.500 mm, pomik osi Y: 1.000 mm, pomik po osi Z: 770 mm, hitro pomikanje X-os: 30.000 m/min, hitri pomik os Y: 30.000 m/min, hitri pomik na osi Z: 30.000 m/min, širina mize: 1.000 mm, dolžina mize: 4.150 mm, obremenitev mize: 4.000 kg, 3-Axis Machining Centre Hedelius - BC 100 MAGNUM X-axis travel: 3500 mm Y-axis travel: 1000 mm Z-axis travel: 770 mm Table length: 4150 mm Table width: 1000 mm Table load capacity: 4000 kg Feed rate X-axis: 30,000 mm/min Feed rate Y-axis: 30,000 mm/min Feed rate Z-axis: 30,000 mm/min Tool holder: 50 ISO/BT/MK Guedpfx Aewycmmoh Deh Spindle power: 50 kW Spindle speed: 4,500 rpm Tool changer: 50 positions Number of controlled axes: 3 Chip conveyor: yes Coolant system: yes Length: 8,000 mm Width: 5,000 mm Height: 3,700 mm Weight: 30,000 kg