Krmilna enota

Unitronics V700-T20BJ

Stanje: dober (rabljeno), Leto izdelave: 2003, Automatic Hydraulic Gluing Press Kallesoe Type LV 7821 This press is used for gluing wooden elements, such as panels, with maximum dimensions of 7800 mm x 2100 mm. The gluing process is accelerated by warm water supplied to the press bed, which is kept in continuous circulation (it can be supplied from central heating or heated by built-in electric heaters on the press). Nledpfxorqzgko Anpsf Press heating power: 72 kW Maximum press output: up to 2000 m² / 7.5 hours Glue applicator with feed system for Kallesoe Press Type KL40 – designed for automatic glue application to each lamella and direct transfer to the LV7821 press.

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Nledpfofi Tg Hsx Anpef Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 180 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 8.000 mm, skupna širina: 1.200 mm, skupna višina: 1.300 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, moč: 10 kW (13,60 KM), SOEST Universal Surface Line for oiling, staining, lye treatment, patinating, etc. Primarily for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two disc pads, and two additional brushes. Suitable for distributing, working in, or patinating surface media into pores and/or for removing, spreading, and distributing materials to achieve desired surface effects. 3) Accessories: two replacement application rollers, brand new material pump (never used), four spare brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface line is constructed for professional industrial use and is configured with full equipment options. A lot of additional accessories are included, such as extra rollers and cleaning machines. (See pictures!) Very robust construction, all motors with frequency control (Siemens). Speeds are steplessly adjustable in both forward and reverse operation. Maximum workpiece width approx. 410 mm. The line is in excellent condition with only about 180 operating hours and is therefore described as like new. This surface machine was only used as an auxiliary line in a parquet manufacturing facility and was only operated for certain surface techniques, which explains the low operating hours. It was only sporadically in use from 2019–2022. In 2023, our company downsized, and the machine has been stored ever since. It is therefore immediately available and is in almost pristine condition! Njdsyaiafjpfx Anpolf We no longer require this line; therefore, it is for sale. The original price for this line in 2019 was approx. €87,000. The current selling price is negotiable. The surface line can be inspected by appointment. If required, we can also sell 10 drying trolley racks with this line. (YouTube video is only a sample video of a similar line configuration!)

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AN2018080, skupna dolžina: 12.860 mm, skupna širina: 4.806 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, dolžina podajanja os X: 3.000 mm, delovna širina: 350 mm, moč: 25 kW (33,99 KM), pply/reTRC 1500 – Houtreparatie- en Cosmetica Machine Technische Beschrijving • Systeemoverzicht • Processtroom Systeemoverzicht De Wintersteiger TRC 1500 is een volledig geautomatiseerd industrieel systeem, ontworpen voor het detecteren en repareren van defecten in houten planken. Het combineert geavanceerde 3D-scantechnologie met hogedruk thermoplastinjectie om consistente, hoogwaardige reparaties te realiseren op productiesnelheid. Defecten worden hersteld met thermoplastisch vulmateriaal door middel van injectie- en applicatie-units. Dankzij de nauwkeurige berekening van de vulhoeveelheid en precisie-injectie wordt geen vulmateriaal verspild. Ook de kanten kunnen worden gevuld. Belangrijkste kenmerken • Geautomatiseerde 3D-lasertriangulatie voor defectdetectie • Hogedruk thermoplastinjectie voor duurzame reparaties • Precisiebewerkingsunit voor cosmetisch perfecte afwerking • Onafhankelijke smelt-temperatuurzones met 8 kg tank • Gesloten glycol-waterkoelsysteem voor gecontroleerde uitharding • Ethernet-gebaseerd besturingssysteem met remote onderhoud • Onbeperkt aantal productprofielen en intuïtieve scannerinterface Productbereik (Werkstuk-specificaties) Lengte: 500–3000 mm Breedte: 100–350 mm Dikte: 3–30 mm Productiesnelheid: tot 10 m/min – afhankelijk van aantal en grootte van de defecten Vulsysteem – Injectie- & Applicatie-units • Injectie-unit: • 3-assige positionering (X/Y servo-aangedreven, Z pneumatisch) • Drukgereguleerde smelttoevoer • Hogedrukinjectie • Applicatie-unit: • 3-assige besturing • Fijne nabewerking van gerepareerde zones Foutdetectie: Spot Eye Scanner • 3D-lasertriangulatie en hogesnelheid-camerasysteem • Detecteert defecten vanaf ca. 1 mm diepte • Automatische hoogteaanpassing • 2D + 3D meting • Instelbare parameters voor verschillende houtsoorten Smeltunit • 8 kg tank • Onafhankelijke temperatuurzones • Geïntegreerde zuigerpomp voor constante druk Koelunit • Gesloten glycol-water circuit • Stabiele temperatuurregeling Besturingssysteem • Ethernet-gebaseerde communicatie met remote onderhoud • Toegang tot PLC, scanner, servoaandrijvingen • Energie-efficiënte regeneratieve aandrijftechnologie Scannersoftware • Verwerkt 3D-lichtprofielen • Berekent defectvolume en coördinaten • Onbeperkte productprogramma’s • Intuïtieve bedieningsinterface Hogedrukinjectieproces 1. Smelten van het thermoplastische materiaal 2. Druk- en temperatuurregeling 3. Gerichte injectie in het defect 4. Directe koeling 5. Minimale oppervlakte-residu • Voordelen: • Laag materiaalverbruik • Uitstekende hechting • Geen aantasting van omliggende houtstructuur Systeemarchitectuur • Smeltunit • Verwarmde slangen • Injectiekop • Koelplaat • Koelunit met retourstroom Nodpfx Aox Dmdhjnpelf

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, Stroj za utore za parket Costa Righi mod. Zefiro 2200 Največja razdalja med zunanjimi rezili: 2200 mm Uporabna prehodna širina kosa: 2400 mm Vključujoč vhodni trak in vhodne verige Vključena rezila Nsdpsx Rrqvefx Anpslf

Stanje: rabljeno, Leto izdelave: 2025, barva: sivo-črna, lastna masa: 3 kg, prva registracija: 06/2025, vrsta goriva: bencin, vrsta prenosa: mehanski, TITLE: USED ROLL-OFF CONTAINER FOR BULKY WASTE WITH HYDRAULIC LID, DRIVER'S SIDE OPENING AND PASSENGER SIDE HINGES, REAR OPENING WITH TWO FOLDING DOORS, AND BRAND-NEW FLOOR REF: 25-U-89 TYPE: Bulky waste NEW: No LID: Yes OPENING: Rear with two folding doors DIMENSIONS TOTAL EXTERNAL LENGTH: 5.00 m BOX OUTER WIDTH: 2.50 m INTERNAL / EXTERNAL FRONT WALL: 2.20 m / 2.60 m INTERNAL / EXTERNAL REAR WALL: 2.20 m / 2.60 m INTERNAL / EXTERNAL SIDE WALL: 2.20 m / 2.60 m CAPACITY: 25 m³ WEIGHT: 2,840 kg FLOOR THICKNESS: 4 mm WALL THICKNESS: 3 mm COLOUR: Green All information is subject to errors and/or omissions. Prices shown exclude VAT. Please contact our sales department for up-to-date pricing and conditions. For further information: Loris: +39 3484773001 URL: #therolloffspecialists Nlodpfx Aewuwvrjnpjf SCARRABILI AURORA Operates in the sale and purchase of industrial and commercial vehicles, with a strong specialization in the waste management sector. Specialists in trucks, trailers, and roll-off equipment. With a ready-to-deliver fleet of over 50 trucks and more than 150 bins, containers with and without roll-off cranes. E.&O.E. (Errors and Omissions Excepted) Given the amount of listings and details included, Aurora advises verifying the accuracy of the data with our sales staff.

Stanje: rabljeno, Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, Olupljanje s frezalno glavo, maks. dolžina 6000 mm, 35 kW, z mehanizacijo. Nljdpexpuzrsfx Anpef

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Največja hitrost podajanja 200 m/min • Elektronski nadzor hitrosti 30 - 200 m/min • Največja delovna širina 250 mm • Minimalna delovna višina 12 mm • Največja delovna višina 100 mm • Hitrost vretena 5000 & 6000 vrt/min • Premer vretena 50 mm. Za doplačilo je možen razstavljanje in naklad na transportno vozilo. Njdpfx Asyzdtkjnpslf

Stanje: rabljeno, The COVERTEK machining center is suitable for processing solid and laminated timber beams. They are used for the construction of frames and roof structures. * Gantry with mobile positioning carriages; * Machining on 6 sides without rotating the workpiece; * Dual 5-axis machining unit with 12-position HSK-E63 tool holder; * No. 2 spindles, each with 17 kW; * Data imported from CAD/CAM programs Technical Specifications Nedpstz H Egofx Anpslf * Workpiece width: min. 100 mm - max. 600 mm; * Workpiece thickness: min. 70 mm - max. 300 mm; * Workpiece length: max. 13,000 mm; * Saw blade diameter: 640 mm; * Feed speed: max. 80 m/min; * Software type: TPA ALBATROS EDICAD; * Central automatic lubrication; * Liquid-cooled spindle; * CE certification; * Total connected load: 70 kW TECHNICAL DATA MUST BE VERIFIED UPON ARRIVAL OF THE MACHINE AT THE WAREHOUSE

Stanje: zelo dobro (rabljeno), O04018) No. 1 FILTER (extraction substation) - Total air flow: 18,000 m³/h (estimated) _____ O04019) No. 1 FILTER (extraction substations) - Total air flow: 50,000 m³/h (estimated) - Power: approx. 90 kW _____ O04020) No. 1 FILTER (extraction substations) - Total air flow: 45,000 m³/h (estimated) - Power: approx. 30 kW Nledpfowrdw Rex Anpof _____ O04021) No. 1 FILTER (extraction substations) - Total air flow: 45,000 m³/h (estimated) - Power: 55 kW - No. 360 filter bags (each with a diameter of 123 mm x 3000 mm length) _____ O04022) No. 1 FILTER (extraction substations) - Total air flow: 36,000 m³/h (estimated) - Power: 55 kW - No. 360 filter bags (each with a diameter of 123 mm x 3000 mm length) _____ O04023) No. 1 FILTER (extraction substations) - Total air flow: ????? m³/h (estimated) - Power: 30 kW - No. 180 filter bags (each with a diameter of 123 mm x 3000 mm length) _____