CNC obdelovalni center z avtomatizacijo

Holz-Her Dynestic 7521

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, HOLZ-HER Edge Banding Machine ACCURA 1558 performance with BELT BRIDGE and intelligent equipment package for edge thicknesses up to 15 mm. Easy program changeover and tool adjustment via the 18.5” 16:9 color touchscreen display. Short glue system heat-up time with the GlueJet (GJ 301 automatic): approx. 2 to 3 minutes, depending on glue type and ambient temperature. Always fresh glue thanks to the GlueJet adhesive application system and glue cartridges. Changing PUR adhesive and cleaning the system is effortless and can be done within minutes. Axis adjustment via high-precision, repeatable servo motors. Special configuration for materials with protective foils, such as high-gloss and supermatt surfaces! One of the absolute highlights of this machine is the multifunction package, ideal for workshops processing a wide variety of edge types. The DIA tooling features multi-stage design, allowing switching between radii and chamfers as needed – from longitudinal milling to corner copying and profile scraping. The extendable workpiece support and extended feed-in section with air cushion table make handling large workpieces easier. A guidance system assists with feeding small workpieces into the machine. Edge thickness for coil material: 0.4 – 3 mm (material-dependent) Psdpfx Asyfgrpobiegt Edge thickness for strip material: 0.4 – 15 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: 65 mm Feed speed: 10 – 25 m/min Glue application via GlueJet for both EVA and PUR quality adhesives, with minimal effort. Compatible with all standard edge types, including high-gloss, supermatt, and solid wood edges up to 15 mm. Motorized adjustment of the infeed guide fence Narrow-part guidance system Prepared for connection to a RETURN system Motor-driven pressure bridge with upper belt drive Multifunction units for quick setup of radius, flush, and chamfer operations Vertical & horizontal spray systems And much more. Delivery, installation, and operator training of the machine can be arranged directly through us for an additional charge. The machine is currently located at our dispatch warehouse in Gratwein, Austria. In case of discrepancies between the German version and a foreign-language version, only the German version is legally binding. Our General Terms and Conditions can be found on our website at holzher.de/de/agb.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 114550, delovna širina: 230 mm, višina skobljanja: 120 mm, število vreten: 6, Planing and Moulding Machine Weinig Powermat 500 for four-sided planing and profiling of solid wood. The machine is equipped with CNC control as well as the proven PowerLock quick-change system, and additionally features a mechanized return system for the planed parts, making it ideal for efficient production. Machine Equipment: - 6 spindles 1st spindle: 7.5 kW, 8,000 rpm 2nd spindle: 7.5 kW, 8,000 rpm, PowerLock 3rd spindle: 7.5 kW, 8,000 rpm, PowerLock 4th spindle: 7.5 kW, 8,000 rpm, PowerLock 5th spindle: 7.5 kW, 8,000 rpm, PowerLock 6th spindle: 7.5 kW, 8,000 rpm, PowerLock - Working width: 20 – 230 mm - Working height: 8 – 120 mm - Worktable: 2.5 m (including jointer fence) - Top pressure rollers, spring-loaded - Side pressure pneumatically actuated - Frequency-controlled feed unit with brake, feed speed: 5 – 30 m/min - Reduced distance between feed rollers at feed section (400 mm) - Additional feed rollers and reduced roller spacing - Durofer steel roller, self-cleaning Pedpfxsx Sxfvs Abiogt - Infeed roller before the 1st bottom tool, pneumatically actuated - Siemens/ Powercom control system The machine is in very good, well-maintained condition. It has been professionally operated, serviced regularly, and will remain in operation until 17 December 2026. Inspection of the running machine is possible at any time by appointment. The tools for the 6 spindles are included in the price. Dismantling and loading will be invoiced separately to the buyer. The technical description and layout of the machine can be found in the documents.

Stanje: rabljeno, Popolnoma avtomatizirana linija za obdelavo profiliranih desk za naslednje dimenzije: debelina: približno 24–100 mm, širina: približno 80–240 mm, dolžina profiliranih desk: 400–1500 mm, končna dolžina: 2,50 m – 13,50 m, brezstopenjsko. Sestavljena je iz naslednjih komponent: Psdpfxovvi Tye Abijgt - SMB-vakuumska enota za podolžno zlaganje z 2 dvižnimi mizi in 2 transportnimi linijami za pakete, leto izdelave 2013, maksimalne dimenzije paketa: 1,20 x 1,20 x 6,00 m, 4 sesalne plošče, sistem Sicko, enota za ločevanje in dovod na transportno linijo za skeniranje, obracalnik desk, smernik za premokro, prezgodnje ali B-kakovost, označevalna postaja oziroma avtomatski način delovanja. - Bidac-skener za prepoznavanje koncev desk, leto izdelave 2013. - Brookhuis-merilnik vlage FMI 5, leto izdelave 2019. - Microtec-skener Goldeneye 502, leto izdelave 2012, z rentgenskim sistemom, 4 barvne kamere in novo programsko opremo za optimizacijo. - Dimter-Opticut 350-2, leto izdelave 2003, z izmetalnikom s krilci, leto izdelave 2009, in pripadajočimi transportnimi trakovi ter pnevmatičnim izmetalnikom za 2 dodatni kakovosti. - NKT-enota za pakiranje. - NKT-linija za obdelavo profiliranih desk z rotacijsko mizo, Specialpack AH 1050, leto izdelave 2005, sestavljena iz: rezalnik, postaja za preklapljanje, dovodna linija, dolžina 5,0 m, tlačna stiskalnica, dolžina 6,00 m, krojna žaga. - SMB-stroj za zlaganje, leto izdelave 1998, dolžina 2,50 – 13,50 m, razdeljiv na 2 enoti (npr. 2 x 5,0 m), 8 zlagalnih rok, 8 zlagalnih plošč, ročno, brezstopenjsko nastavljiv omejevalnik, elektro/hidravlični pogon, maksimalna širina paketa: 1200 mm, maksimalna višina paketa: 600 mm, hidravlični izmetalnik paketa. Lokacija skladišča: stranka.

Stanje: zelo dobro (rabljeno), Tacchella Macchine grinding machine type 40LR in very good condition. Pgjdpfx Absivg E Hsijt Specifications: Longitudinal travel X-axis: 400 mm Cross travel Y-axis: 250 mm Clearance between worktable and spindle axis: 375 mm Wheel speed: 3000/6000 rpm Wheel dimensions: 150x20 mm Weight: 800 kg

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Y travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Table size (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 – 2,000 mm/min Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws Pgedpfxot Hwt Se Abiet • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more

Stanje: rabljeno, Leto izdelave: 2010, stružna dolžina: 1.495 mm, hitrost vretena (min.): 35 obr/min, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 160 mm, pomik po osi Z: 1.545 mm, teža obdelovanca (maks.): 300 kg, skupna višina: 2.577 mm, skupna dolžina: 5.088 mm, skupna širina: 2.450 mm, nos vretena: A2-6, premer vretena: 660 mm, Oprema: dokumentacija / priročnik, Mazak Integrex 200-lV ST CNC-obravalni center za struženje in frezanja z drugo vreteno CNC-krmilnik Mazatrol Matrix Premer obdelovanca pri struženju 660 / 260 mm Dolžina obdelovanca pri struženju 1495 mm Premer luknje v vretenu 65 mm Stožec vretena A2-6 Stožec vretena pomožnega vretena A2-6 Število vrtljajev vretena 35 - 5000 vrt/min Število vrtljajev pomožnega vretena 35 - 5000 vrt/min Število vrtljajev glave za frezanje 15 - 21.500 vrt/min Gib X-osi 580 mm Gib Y-osi 160 mm Gib Z-osi 1.545 mm Gib B-osi 225 ° Indeksiranje C-osi 0,0001° (360°) Stožec orodja Capto C6 Število orodij v reviziji 120 Avtomatski podajalnik palic Irco-Breuning ILS-MUK Za vsa vprašanja glede stroja ter za dogovor o ogledu nas prosimo, da nas kontaktirate po telefonu ali e-pošti. Podozqt Umspfx Abisgt Poglejte si tudi naše druge oglase, da dobite celovit pregled naše zaloge.

Stanje: rabljeno, Leto izdelave: 2013, moč: 17,1 kW (23,25 KM), vhodna napetost: 400 V, vhodni tok: 29 A, vhodna frekvenca: 50 Hz, potovalna razdalja osi X: 4.320 mm, pomik osi Y: 1.326 mm, pomik po osi Z: 170 mm, število osi: 5, število mest v zalogovniku orodij: 33, Oprema: CE označba, Biesse Rover A 1343, CNC obdelovalni center, 5-osni Opis: CNC obdelovalni centri serije Rover A ATS Delovni obseg: X = 4.320 mm; Y = 1.326 mm; Z = 170 mm Transportni trak za odpadke Avtomatski sistem za mazanje Oddaljena upravljalna konzola 1 x vakuumska črpalka s pretokom 250 m3/h za standardni sistem Pomožni vakuumski sistem za stroje z dvojnim delovnim območjem Večconski sistem z 8 prijemali in 24 vpenjali elementi z avtomatskim pozicioniranjem (ATS-EPS X-Y) 8 referenčnih omejil za pozicioniranje z globino 115 mm 8 sprednjih referenčnih omejil za pozicioniranje z globino 140 mm, nameščenih v višini 1190 mm nad zadnjimi omejili 4 stranska omejila za pozicioniranje z globino 140 mm (2 desna + 2 leva) z vgrajenimi elementi 2 dodatna stranska omejila za pozicioniranje z globino 140 mm (1 desno + 1 levo) Pnevmatski sistem za dvigovanje plošč Enota za nadzor hladilne tekočine, ki nadomešča izmenjevalnik toplote, ki se uporablja pri 5-osnih enotah z močjo 13 kW. Pgjdpfx Aboy U Naijiet Upravljalna enota s 5 interpolirajočimi osmi, moč 13 kW (17,4 KM), povezava HSK F63, hladjenje s tekočino. Napredna programska oprema BiesseWorks Verižni sistem za shranjevanje orodij s 33 mesti – razdalja med mesti 120 mm (Kljub naši veliki pozornosti so morebitne spremembe, napake v tehničnih podatkih, cenah in vseh informacijah rezervirane (tipkarske) napake. Za natisnjene podatke ni jamstva! Dostopnost je odvisna od predhodne prodaje). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Cene ne vključujejo stroškov oglaševanja na portalu MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Najboljši stroji za obdelavo lesa iz Nizozemske Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Stanje: rabljeno, številka stroja/vozila: 008116, Maks. višina obdelave: 120 mm Maks. podajalna hitrost: 25 m/min Število delovnih vreten: 6 Pgedpfx Abow Iddzjiot

Stanje: rabljeno, Leto izdelave: 2008, · Working area X-Y-Z: 3,660 x 1,550 x 130 mm · Travel length X-Y: 4,200 x 2,000 mm Description of Units and Accessories (Basic) The base frame structure is a monolithic construction made from thick-walled steel. It is reinforced with welded triangular steel plates across the entire machine bed, resulting in exceptional stability. The triangle shape with a wide base used for load-bearing components is the secret to ensuring long-term precision and stability. The machine layout allows the user to achieve an optimized workflow while minimizing the required footprint. The base structure supports the machining unit with a balanced and secure foundation, offering particularly effective load distribution. The mobile gantry-style aggregate carrier is constructed as a solid monoblock. It is positioned in the X-axis on precision-ground prismatic guides via linear ball bearing carriages. On this carrier, the machining unit is also mounted on prismatic, ground guides and linear ball bearing carriages. Axis Motion: The drive system for the Y and Z axes uses precision-ground ball screws of the highest accuracy class. The X axis is driven by a backlash-free, preloaded precision rack and pinion system, ensuring balanced load distribution during positioning. This characteristic is essential to guarantee smooth motion, even in complex operations. All axis movements are performed by brushless AC servomotors. These deliver excellent positioning speeds due to their very short ramp-up times, and their measuring systems are fully integrated. These features make this type of drive completely maintenance-free. · Rapid traverse X: 40 m/min · Rapid traverse Y: 60 m/min · Rapid traverse Z: 22.5 m/min Vacuum System (Basic) Pgodjvvi Rfspfx Abijt · Vacuum pump: 100 cbm/h · Power: 2.5 kW · Max. vacuum (connection): 0.9 bar Control System / Control Cabinet · Office PC or Industrial PC (see options) · Basic NC Control: ESA-GV KVARA 6.0 · Cable remote control unit with essential functions ELECTRICAL/ELECTRONIC CNC CONTROL The universal system is equipped with a powerful NC control. The integrated office PC brings a unique level of familiarity to the NC control: the software runs on Windows XP, allowing fast and easy programming, which can be quickly mastered even by inexperienced users. The system is open and accommodates the connection of CD-ROM drives, audio cards, barcode scanners, modem, printer, scan systems, etc. Installation of all standard network systems and all commercially available CAD programs is possible. To save space, the control cabinet is installed beneath the machine table; the operator works at a separate mobile terminal that can be freely positioned. PROGRAMMING SYSTEM XILOG Software features: - Import of DXF files - Import of ASCII files - User interface in the operator's native language (available in I, GB, F, D, E) - Linear and circular interpolation in three axes, spatially linear, spiral in the selected plane - Supported programming - Calculator for direct transfer of calculated data - Graphic and syntax aids for drilling and milling operations - Parametric programming to allow identical panel processing on different

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), The Coiltech Decoiler Straightener Feeder System is a compact coil feeding system for presses. Strip width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler capacity: 6000kg, inner diameter (min-max): 470-520mm. Connected load: 7.5kW, supplied with documentation. Pgsdpfxoi El Uce Abist