Demag Pk 10 nakup rabljenega (508)

Stanje: dober (rabljeno), Leto izdelave: 2014, Proizvajalec: DEMAG Ncodeyu R Dzjpfx Advsp Nosilnost: 860 kg + 630 kg (opremljeno z dvema dvigali) Točne tehnične mere so prikazane na slikah. Tir za dvigalo je mogoče podaljšati s strukturami in nogami, prikazanimi na slikah, vendar pa so za podaljšanje potrebni tudi drugi elementi tira, ki niso na voljo!!

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, moč: 0,75 kW (1,02 KM), vrsta zaščite (IP koda): IP55, Ponujamo rabljeno postajo za praznjenje big bagov Mannesmann Demag 500-K-V1, letnik 1994. Dovoljena nosilnost: 0,5 t Letnik izdelave: 1994 Višina dviga kljuke: 10 m Dimenzija verige: 5,8 x 15,2 mm Skupina verige: 10 H Hitrost dviga pod obremenitvijo: 8 m/min Hitrost dviga v prostem teku: 4 m/min Ncsdpeyv Uz Uofx Advop Nazivna moč motorja: 0,75 kW Nazivni tok: 2,3 A Nazivno število vrtljajev motorja: 2680 1/min Stopnja zaščite: IP55 Za dodatna vprašanja ali informacije nam pišite ali nas pokličite.

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, pomik po osi Z: 1.500 mm, Oprema: dokumentacija / priročnik, Število osi: 3 Doseg: 1500 mm Nosilnost: 5 kg X=420 mm Nsdpsyfhw Hsfx Advscp Y=1200 mm Z=1500 mm

Leto izdelave: 1991, stanje: rabljeno, številka stroja/vozila: 149125/95, Max. operating pressure: 8 bar Delivery rate: 2.51 m³/min Drive motor: 380/660 V, 15 kW Space requirements: 820 x 950 x 1200 mm (H) Weight: 360 kg Air receiver, manufacturer KAESER, year of manufacture: 1999 Ncodpfsby Hpbsx Advsp Capacity: 1000 l Max. operating pressure: 11 bar Space requirements: 800 mm diameter x 2300 mm (H)

Stanje: rabljeno, Tehnične podrobnosti: Nosilnost: 1,25 t Dvig: 4000 mm Razpon: 3000 mm Maks. kot vrtenja: pribl. 300 stopinj Skupna višina stebra: 4020 mm Hitrosti dviga: 8/2 m/min Pot kljuke: 4000 mm Premer stebra: 160 mm Teža: 164 kg Dimenzije D x Š x V: ležeče 4,2 x 3,5 x 0,2 m Tip žerjava: St stebrno vrtljiv žerjav (KBK lahek žerjavni sistem) Proizvajalec: Demag Cranes & Components GmbH Izvedba: Steber z KBK votlim profiliranim nosilcem Njdpfx Adsyuyiasvscp Uporaba: Manipulacija materiala na montažnih in delovnih mestih

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cc Clamping unit: Ncodoyvq Nbspfx Advsp Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping unit design: toggle Control system: NC5 Additional equipment: Euromap 67 Robot interface Controller with pneumatic valve Controller for 5 hot runners Injection unit hardened – bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 Robot Year of manufacture: 2016 6-axis robot: 5 axes powered by electric servo motors: X, Y-telescopic, Z, B, C Travel distances: X-1200, Y-2400, Z-4000 mm Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Robot and conveyor belt can be purchased at additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are test-run by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR833 robot Year of manufacture: 2012 Ncedpfxjyvq Iqs Advsp Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Shot volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping mechanism: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface Air valves x 5 Hydraulic core pull with proportional valve control x 1 Hot runner control x 5 Hardened injection unit - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 variable output hydraulic pumps Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes are driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Travel paths on axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt and protective enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Shot weight: 205 g Injection pressure: 2,020 bar Injection volume: 231 cc Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runner support Hardened injection unit – bimetallic Built-in printer Nodpfx Adjyvqpbsvjcp Option to change screw diameter Dimensions: Weight: 4,100 kg Length/Width/Height: 4.10x1.40x1.90 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Sumitomo Demag IntElekt 50/370-200 / Elektromos fröccsöntő gép Gyártási év: 2009 Fröccsegység: Csigaátmérő: 35 mm Fröccstömeg: 128 g Fröccsnyomás: 1466 bar Adagolótérfogat: 144 cm³ Záróegység: Záróerő: 50 t Oszloptávolság: 370x370 mm Felfogólap méret: 520x570 mm Kidobó: elektromos Zárórendszer: könyökkaros Vezérlés: NC5 - Érintőképernyő Ncodpfx Adjyvqn Dsvep További felszereltség: Elektromos gép: nagy fordulatszámú, energiatakarékos és nagyon csendes Euromap 67 Robot interfész Légszelep x 4 Forrócsatorna vezérlés Edzett (bimetál) fröccsegység Központi kenés A csigaátmérő cseréje lehetséges Méretek: Tömeg: 4750 kg Hossz/szélesség/magasság: 4,20x1,26x1,84 m Meghajtás: Fűtőteljesítmény: 5,7 kW Minden eladásra kínált gépet szerviztechnikusaink indítanak el értékesítés előtt. Lehetőség van videót kapni a kiválasztott gép műszaki tesztjéről, vagy részt venni élő technikai teszten łódzi telephelyünkön. Ár: Kérésre

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection Unit: Screw diameter: 18 mm Shot weight: 20 g Injection pressure: 2,400 bar Plasticizing volume: 22.8 ccm Clamping Unit: Clamping force: 25 t Tie bar distance: 280x280 mm Platen size: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Original Demag tool crane: chain, electrically driven, 2 lifting speeds Dimensions: Weight: 2,600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Ncsdpfx Aoyvqnwodvop Pump/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video showing the technical test of the selected machine or to take part in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Demag dvigalo P-Zug 3,2 t – tip P208H11, štiristranski, hitro in fino dviganje. Dolžina 1150 mm, višina 350 mm, širina 330 mm. Nedpfxsyxbxxj Advecp

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2004, številka stroja/vozila: LS137, Tehnični podatki: 1x Demag KBK 2 stebrni vrtljivi žerjav NL 500KG z Demag DK verižnim vitlom Nosilnost pri polnem iztegu 500KG Višina: cca 4,05 m Spodnji rob nosilca: cca 3,55 m Izteg: 4 m Višina kavlja: cca 2,8 m Skupna teža cca 1000KG vključno z osnovno ploščo 115x115 cm z 500KG Demag DK verižnim vitlom Nedpfxoywfmwe Advocp vklj. zatič, kabelski verižnik, voziček, zaključna kapica itd. Območje vrtenja 300°, priklop na 400V 16A Žerjav je razstavljen in takoj na voljo Lokacija artikla: 75053 Gondelsheim Na voljo so tudi drugi žerjavi, nosilnost 80–5000 kg, povprašajte Glejte slike Pošiljanje preko špedicije ali osebni prevzem samo po dogovoru o terminu

Stanje: dober (rabljeno), Trenjsko kolo, pogonsko kolo za mostno dvigalo, mostno dvigalo, halno dvigalo, montažno dvigalo, delovno mesto dvigalo, kolesni blok, sistem kolesnih blokov Ncodpfx Adjw Uxt Revsp -Proizvajalec: Demag, kolesni blok za pogonski mehanizem dvigala -Tip: žal ni točne tip oznake -Premer pogonskega kolesa: 125 mm -Pogonsko kolo: širina tira med merami 48 mm -Prevzem: Ø 30 mm, mere glej slike -Količina: na voljo 2 kosa -Cena: na kos -Dimenzije: 220/97/V160 mm -Teža: 8,5 kg/kos

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1986, številka stroja/vozila: MIKA-CN, Tehnične podatke: 1x Demag KBK 1 stebrno vrtljivi žerjav NL 125KG z verižnim vitlom Demag DC (125 kg - letnik 2007) Nosilnost pri polnem iztegu: 125KG Višina: cca 3,05 m Višina pod konzolo: cca 2,55 m Iztez: 3 m Višina kljuke: cca 2,15 m Skupna teža: cca 300KG Z verižnim vitlom Demag DC 125KG Vključuje: zatič, vodilo za kable, voziček, zaključni pokrov itd. Območje vrtenja 300°, priklop na 400V 16A Žerjav je demontiran in takoj na voljo Ncodpfoyu E I Iex Advop Lokacija artikla: 75053 Gondelsheim Na voljo so tudi drugi žerjavi, nosilnosti 80-5000Kg, povprašajte za več informacij Glejte slike Dostava s špedicijo ali osebni prevzem le po dogovoru o terminu

Leto izdelave: 2019, obratovalne ure: 17.716 h, stanje: pripravljen za uporabo (rabljen), Splošni podatki Širina: 1920 cm Globina: 7750 cm Teža stroja: 26.210 kg Ncsdpfx Aex D Nx Isdvop Višina: 2410 mm Ta električni stroj za brizganje SUMITOMO SHI DEMAG El-Exis SP 350/820-920 je bil izdelan leta 2019. Robusten električni stroj za brizganje s premerom polža 40 mm in zapiralno silo 3.500 kN. Deloval je 17.716 ur in izvedel 12.440.761 ciklov, kar omogoča obsežne proizvodne zmogljivosti. Razmislite o nakupu električnega stroja za brizganje SUMITOMO SHI DEMAG El-Exis SP 350/820-920. Za več informacij nas kontaktirajte. Vrsta uporabe Brizganje plastike

Stanje: dober (rabljeno),

Stanje: dober (rabljeno),

Stanje: dober (rabljeno),

Stanje: dober (rabljeno),

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 96.986 h, vpenjalna sila: 600 kN, premer vijaka: 30 mm, This hydraulic injection moulding machine, model DEMAG ET60-200 concept, was manufactured in 2003. It features a clamping force of 600 kN and a maximum mould weight of 580 kg. The machine is equipped with a robust injection unit featuring a screw diameter of 30 mm and an injection pressure of 1900 bar. Take advantage of this opportunity to purchase the DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further information. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mould installation height: 210 mm • Opening stroke: 400 mm • Max. mould weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on ejector side/ES) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Shot volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Armoured/wear-resistant injection unit: Yes Nodpfoyg Nfuox Advecp • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 tonnes Additional equipment • Robot / parts removal device: W621-1381 • Strokes: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: integrated 7-zone control • Tool sensors: Kistler (p=1/t=0)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 15.642 h, premer vijaka: 45 mm, skupna višina: 2.213 mm, skupna masa: 15.750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection molding machine, ideal for precise plastics processing. Take advantage of the opportunity to purchase this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection molding machine. Contact us for further information. Additional Equipment • Fanuc robot Machine Advantages Qualitative Machine Advantages • Process data acquisition, mold protection Technical Machine Advantages • Minimum mold height: 350 mm / maximum mold height: 745 mm • Electronic main connection: 3/400 V 50 Hz • Programmable process, high dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Nodpfxsx D Hnte Advjcp Additional Information Standard Equipment: Support of the moving platen via linear guides/ Short/long stroke ejector/ Interface for external printer (hardcopy)/ Individual axis motion optimization (activeAdjust)/ Four-stage mold closing and four-stage mold opening process/ Increased pump drive power II (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3-phase + N + PE/ Separate mains connections for drive/heating/ Color data display/ Reinforced oil cooler (cooling water supply up to 35 °C)/ Separate water connections for mold and machine cooling/ Basic version Europe/ Corrosion protection/ Paintwork: Jet black (RAL9005): machine bed with installations, lower control cabinet/ Signal white (RAL9003): clamping unit, injection unit, nozzle protection/ Signal white (RAL9003): fixed safety devices, upper control cabinet/ Signal white (RAL9003): safety doors/ Structured Surfaces: Elastic machine mounts/ Digital and wear-free position measuring system (ultrasonic/high-resolution encoder for injection, mold, and ejector movement)/ Mold connection dimensions Type E (according to EUROMAP March '96)/ Centering diameter fixed platen: 160 mm/ Centering diameter moving platen: 160 mm/ No side ejector plate/ Standard Mold Installation Height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety door closed)/ Ejector with position control (P/F+V independently programmable, parallel to mold movement)/ Oil lubrication of toggle lever/ Injection unit/ Optional Equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for fine filtering in bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), switchable via main switch/ Socket IECEE 3Ph / 400V-16A, switchable via main switch/ Warning light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on moving platen (programmable)/ 6 pneumatic 5/2-way valves on fixed platen (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with check valves)/ Manual pressure relief for core pull 1-circuit/ Operator-side safety guarding extended (250 mm)/ Hot runner control 12 zones, integrated (2.75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force regulation/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with discharge option/

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface Njdpfex D Rqrjx Advjcp • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 17.577 h, vpenjalna sila: 1.600 kN, skupna višina: 2.060 mm, This SUMITOMO SHI DEMAG IntElect 160/520-340 smart was manufactured in 2013. It is an all-electric injection molding machine known for its precision and efficiency. If you are in the market for a high-quality injection molding machine, consider the SUMITOMO SHI DEMAG IntElect 160/520-340 smart, which we are offering for sale. Contact us for further information. Additional Equipment • Sepro Robot SDR 11 Machine Advantages Technical Machine Specifications • Clamping unit: 160 / clamping force: 1760 kN / max. opening stroke: 495 mm / minimum mold height: 275 mm / maximum mold height: 585 mm • Distance between platens, max.: 1080 mm / platen size (H x V): 760 x 785 mm / tie bar spacing (H x V): 520 x 520 mm • Ejector stroke: 125 mm / ejector force: 35 kN • Injection unit: 340 / screw diameter: 35 mm / L/D ratio: 20 / injection volume (PS), without accumulator: 288 cm³/s • Metering stroke: 162 mm / max. nozzle stroke: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact force: 30 kN • Material hopper capacity: 35 l / max. injection speed, standard: 300 mm/s / max. injection speed, increased: 500 mm/s • Net weight without oil: 7300 kg Additional Information Electrical and pneumatic interfaces: - Sockets: - 2 x Schuko (1Ph, 230V, 10A) - 2 x IECEE (3Ph, 400V, 16A) – switchable via main switch - Additional Schuko socket also available (same specification) - Valves: - 1 x pneumatic 5/2 valve on moving platen (programmable) - 2 x pneumatic 5/2 valves on stationary platen (programmable) - I/O: - 3 digital inputs / 3 digital outputs (freely programmable) - Terminal strip outside the control cabinet Air & Cooling: - Central air supply and piping - Cooling system: open circuit - Cooling water controller: 4 circuits with temperature display (max. 10 l/min per circuit) - Separate water inlet for cooling (mold + machine) - Mold cooling shutoff (time programmable) Ncjdpfex D Hnmex Advep Mechanical Features & Movement: - Clamping and injection unit colors: - Jet black (RAL9005): bed, pump station, lower control cabinet - Signal white (RAL9003): clamping unit, injection unit, safety covers, guards, safety doors - Platen layout: E standard (similar to EUROMAP, March 1996) - No side ejector plate - Ejector: held in front position by spring-loaded mold ejector - Standard mold height - Standard closing speed - Active movements only when guard is closed - Screw: wear-resistant nitrided cylinder, standard L:D, 35 mm diameter - Non-return valve: 3-piece, ring-shaped Control, Programming & Monitoring: - Inputs/outputs and sequence freely programmable - Switch programs (e.g., dry run, start-up scrap counter, timed cooling) - Injection process: - Injection force at max. injection speed: 200 mm/s - Back pressure programmable via 6-point polygon - Hold pressure switchover depending on melt pressure - Post-injection, back pressure, dosing: closed-loop control - Feed throat temperature control: closed-loop, max. 90°C ±9°C - Reduced nozzle closure force (programmable) - Clamping force: closed-loop controlled

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 122.158 h, vpenjalna sila: 3.300 kN, premer vijaka: 60 mm, This hydraulic injection moulding machine, DEMAG ET 330 - 1450, was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for a wide range of applications. The machine is equipped with a Wittmann W322-121 linear robot, enhancing automation capabilities. Take advantage of this opportunity to purchase the hydraulic injection moulding machine DEMAG ET 330 - 1450. Contact us for further details. • Clamping Unit: • Clamping force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mould installation height: min. 330 mm / max. 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mould weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection Unit 1: • Unit Code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Shot volume: 763 cm³ • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm Ncodpfx Adjyg Nkwsvjp • Maximum dosing stroke: 270 mm • Plasticising rate: 41 g/s • Equipment/Controls: • Hardened (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (yes/yes) • Printer interface: integrated • Hot runner control: 0 zone (none) • Maintenance: • Hose replacement performed in 2017 Additional Equipment • Wittmann W322-121 CNC linear robot/extraction unit (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine. • Locking force: 2,750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mould height: 330–830 mm • Opening stroke: 675 mm • Max. daylight (distance between platens): 1,505 mm • Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg) • Ejector: • Stroke: 200 mm Ncedpeyfq Alofx Advsp • Force: 80 kN • Centring ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1,351 bar • Plasticising rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle orifice: 3 mm • Max. dosing stroke: 225 mm • Note: Second injection unit listed without data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm • Hot runner control: 9 zones • Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system • Needle shut-off control: hydraulic (not equipped for pneumatic)