Injection molding machine

DEMAG System 1500/1500-16000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8673 0023, vpenjalna sila: 15.000 kN, premer vijaka: 145 mm, tlak vbrizgavanja: 1.454 letvica, širina plošče: 1.880 mm, višina plošče: 2.150 mm, Regularly serviced machine – see repair history TECHNICAL DETAILS Clamping force: 15,000 kN Mounting platen dimensions (H × V): 2,150 mm × 1,880 mm Clear distance between tie-bars (H × V): 1,500 mm × 1,250 mm Min./Max. mould height: 700 mm – 1,400 mm Maximum opening stroke: 2,900 mm Control: DIAS Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight: 9,880 g Injection pressure: 1,454 bar Electrical and hydraulic equipment Pump motor rated power: 165 kW Heating capacity: 97 kW MACHINE DETAILS Net weight with control cabinet: 21,000 kg Dimensions (L × W × H): 14.4 m × 3.4 m × 2.9 m Electrical connection Main supply: 3 × 400 V, 50 Hz Control voltage: 3 × 400 V, 50 Hz Repair history 2010: New screw with RSP and barrel 2015: New Ibed 2015: New wiring board 2017: Motor and pump 2 replaced 2017: Injection cylinder BS piston rod replaced with seals 2017: Circulation pump for oil cooler replaced 2017: Teachbox replaced (robot) 2018: Pumps P1 + P3 replaced (at 65,800 h) 2018: Hydraulic oil changed 2019: Injection valve replaced 2019: Dosing inverter overhauled by Eichler 2021: Motor P1 replaced 2022: New RSP installed Bwjdpey T Hy Djfx Am Esw EQUIPMENT - Wittmann W 753 robot – 2008 - Safety cage and conveyor belt

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mould installation height: 400 mm Maximum mould installation height: 900 mm (extended) Clamping platen (H x V): 1,168 x 1,144 mm Clear tie bar distance (width x height): 830 x 830 mm Maximum mould weight: 6,600 kg Maximum weight on movable clamping platen: 3,800 kg Maximum weight on fixed clamping platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Bwsdpjy Hmfysfx Am Ejw Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure programmable over dosing stroke Installed cylinder heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demoulding stroke Y-axis: 900 mm Vertical demoulding stroke X-axis: 1,800 mm Robot console on fixed clamping platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration (special option includes): • Plastification cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication and emergency-stop interface); • Software including functional screens for MuCell control; • Adapted nozzle chamber guard; • Position-controlled high-speed screw (analogous to ZE388) Conveyor belt: Width: 870 mm Useful width: 800 mm Length: 3,500 mm Height: 880-1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 48.000 mm, skupna širina: 22.000 mm, skupna višina: 8.000 mm, Jeklena konstrukcija – kmetijska stavba/notranja jahalna dvorana/skladišče – naprodaj Velika in vsestranska stavba z jekleno konstrukcijo, v dobrem stanju. Dimenzije: 48 × 22 × 8 m Skupna površina: 1.056 m² Močna konstrukcija iz jekla Velik, odprt notranji prostor Primerna za uporabo kot notranja jahalna dvorana, kmetijska stavba, skladišče, prostor za shranjevanje ali za druge komercialne namene Dobro splošno stanje Lahko se razstavi in premesti Bodpfx Aozv Dnujm Ejww Prostorna in vsestranska stavba z mnogimi možnimi uporabami. Cena in dodatne informacije so na voljo na zahtevo. Skladišče se nahaja na Nizozemskem. Cena: 33.000 €, če jo boste razstavili sami, 43.000 €, če jo razstavi prodajalec.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 60.244 h, vpenjalna sila: 6.500 kN, premer vijaka: 105 mm, skupna širina: 2.300 mm, skupna višina: 2.700 mm, skupna masa: 20.000 kg, največja dolžina izdelka: 8.000 mm, Ta Engel DUO 7050/650 pico je bil izdelan leta 2013. Ima zapiralno silo 6500 kN, maksimalno volumnino vbrizga 4160 cm³ in premer polža 105 mm. Stroj je opremljen z robotskim vmesnikom (Euromap 67) in je v zelo dobrem stanju. Če iščete visokokakovosten stroj za brizganje plastike, priporočamo Engel DUO 7050/650 pico, ki ga imamo na voljo za prodajo. Za dodatne informacije o tem stroju nas kontaktirajte. • Maksimalni vbrizgani volumen: 4160 cm³ • Minimalna višina orodja: 450 mm • Maksimalna višina orodja: 950 mm • Hod odpiranja orodne plošče: 1400 mm • Dimenzije orodne plošče (Š × D): 1510 × 1440 mm • Razmak med stebri: 1100 × 960 mm • Moč motorja: 161 kW • Moč gretja: 73,9 kW Bwsdpfxjx Nr R Hj Am Eew • Število električnih priključkov: 32 • Polmer šobe za vbrizgavanje (na konici): R35 • Premer centrirnega obroča: 200 mm • Število jeder: 0 • Število grelnih con: 0 • Leto izdelave: 2013 • Delovne ure: pribl. 60.244 h • Stanje: zelo dobro • Stanje: v proizvodnji Dodatna oprema • Opremljen z robotom: da • Robotski vmesnik: Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 54.319 h, vpenjalna sila: 16.000 kN, premer vijaka: 135 mm, injekcijska masa: 7.450 g, Ta 3-osna hidravlična brizgalna strojnica tipa Krauss Maffei 1600-17200MC je bila izdelana leta 2001. Ima silo zapiranja 16.000 kN in premer vijačnega valja 125 mm. Maksimalna teža vbrizga stroja je 7.450 g, velikost plošče pa je 2.600 x 2.110 mm. Če iščete visokokakovostne zmogljivosti brizganja, razmislite o modelu Krauss Maffei 1600-17200MC, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Vbrizgalna enota: 17200 • Razdalja med stebri (V x Š): 1600 × 1250 mm • Velikost plošče (V x Š): 2600 × 2110 mm • Prostor (x × y): 1800 × 1400 mm Bsdpsyyyr Tofx Am Eeww • Maks. hod odpiranja kalupa: 2.500 mm • Višina namestitve kalupa (min.–maks.): 900–1.600 mm • Širina odpiranja: 3.400 mm • Sila odpiranja kalupa: 1.108 kN • Sila gibljive plošče: Odpiranje 177 kN / Zapiranje 153 kN • Hod izmetalnega mehanizma: 300 mm • Sila izmetalnega mehanizma (naprej/nazaj): 415 / 177 kN • Obratna napetost: 400 V / 50 Hz • Tok motorja: 446 A • Tok grelnega sistema: 164 A • Skupno število delovnih ur črpalke: 75.125 h Dodatna oprema • Robotski sistem Wittmann W650 (2001) • Hod X 1.500; Y 2.600; Z 3.500 • Rezervni cilinder/komplet vijaka (1x) • Notranji hladilni sistem • Jedralni mehanizem (2x)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Stork S+ 9000-12550 Injection Moulding Machine Control System: CDS700 Year of Manufacture: 2011 Clamping Unit: Clamping Force [kN]: 9000 Platen Dimensions (HxV) [mm]: 1570 x 1560 Clearance Between Tie Bars (HxV) [mm]: 1010 x 1010 Bjdpfx Amswrna Ae Eeww Min./Max. Mould Height [mm]: 300–1190 Maximum Daylight Opening [mm]: 2290 Locating Ring Diameter [mm]: 250 Maximum Ejector Stroke [mm]: 300 Injection Unit: Screw Diameter [mm]: 115 Injection Volume [cm3]: 6232 Shot Weight PS [g]: 5733 Injection Pressure [bar]: 1740 Maximum Injection Speed: 300 Additional Equipment: Pneumatic Valve – 6 pcs Core Pull – 1 pc.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 30.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force: 8,000 kN Maximum mold opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate dimensions (H x V): 1,600 x 1,550 mm Clearance between tie bars (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum daylight: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200/100 kN Bodsymn Rvepfx Am Ejww Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 ccm Shot weight (PS): 3,064 g Injection flow rate: 690 ccm/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil fill capacity: 1,500 l Dimensions and weights: Required space (approx.): 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Max. mold weight: 12,200 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - Tie bar puller - 3 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen - 20 x hot runner control zones - Robot interface as per Euromap 67

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 50.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 8.000 kN, premer vijaka: 95 mm, delovna prostornina: 3.367 cm³, Clamping force: 8,000 kN Maximum mold opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate dimensions (H x V): 1,600 x 1,550 mm Clearance between tie bars (H x V): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum daylight: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200/100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 ccm Shot weight (PS): 3,064 g Injection flow rate: 690 ccm/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated pump motor power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil fill capacity: 1,500 l Dimensions and weights: Required space (approx.): 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Bwjdpfxsymn Nfs Am Eew Max. mold weight: 12,200 kg Accessories: - Oscillation elements Additional equipment: - 1 x air valve - Tie bar puller - 3 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen - 20 x hot runner control zones - Robot interface as per Euromap 67

Stanje: dober (rabljeno), Leto izdelave: 1998, Vbrizgalni stroj Krauss Maffei KM 800-8000 MC Letnik proizvodnje: 1998 Serijska številka: 8D980U9 Nadzor: Krauss Maffei MC3F Sila zapiranja: 8000 kN (800 t) Premer vijačnega valja: 130 mm Razmerje L/D: 22 : 1 Volumen vbrizga: 6570 cm³ Masa vbrizga (PS): 5617 g Tlak vbrizga: 1296 bar Najvišja temperatura valja: 375 °C Prostor med stebri (V x Š): 1120 × 1000 mm Dimenzije pritrdilnih plošč: 1600 × 1530 mm Hod odpiranja: 2000 mm Minimalna višina matrice: 600 mm Največji prostor (odprtina): 2000 mm Hod izmetalnika: 250 mm Sila izmetalnika: 226 / 95 kN (spredaj / zadaj) Hitrost vrtenja vijačnega valja: 92 vrt/min Pretok vbrizga: 929 cm³/s Moč motorja črpalke: 132 kW Bwedpfxszrwy Aj Am Eew Moč grelnih elementov: 70 kW Število grelnih con: 7 Suhi cikel (EUROMAP): 700 ciklov/h Prostornina rezervoarja za olje: 3600 l Napetost napajanja: 400 V / 50 Hz Dolžina stroja: pribl. 10.500 mm Širina stroja: pribl. 2650 mm Višina stroja: pribl. 2400 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Stork S+ 9000-8650 Injection Moulding Machine Control system: CDS700 Year of manufacture: 2010 The machine is in very good technical condition, fully operational and ready for immediate operation in an industrial facility. The package includes a Sytrama 101 GL robot, enabling automation of the injection moulding process. Clamping Unit Clamping force: 9000 kN Dimensions of mounting plates (H × W): 1570 × 1560 mm Tie bar spacing (H × W): 1010 × 1010 mm Minimum / maximum mould height: 300 – 1190 mm Maximum daylight opening: 2290 mm Centring ring diameter: 250 mm Ejector stroke: 300 mm Injection Unit Screw diameter: 98 mm Injection volume: 4010 cm³ Shot weight (PS): 3690 g Injection pressure: 1650 bar Maximum injection speed: 400 mm/s Bwsdpfsxyqyrjx Am Eew Additional Equipment Pneumatic valves – 4 pcs Cores – 1 fixed / 1 movable Robot included: Sytrama 101 GL The machine is available for inspection and testing under power. Photos and demonstration videos available on request. Loading and transport can be arranged.