Stenski vrtljivi žerjav Vrtljivi žerjav Verižno dvigalo

Demag KBK Kran Drehkran Hallenkran 2m 3m Demag KBK1 125/250Kg + Stahl Kettenzug

Stanje: novo, Leto izdelave: 2024, New Aurepa ADR tank trailer, gas, oxygen, nitrogen, argon, CRYOBASE Rjdpot R R Uqefx Apbeu Trailer for liquid nitrogen, liquid oxygen, liquid argon, gas, cryogenics New trailer: Year of manufacture: 2024, Germany All documents available Used tank: Working pressure: 3.85 bar Capacity: 2000 L We also have other tankers available for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, hydrogen, methane. We are happy to prepare an offer for you or provide further information.

Stanje: rabljeno, številka stroja/vozila: 7979, Table diameter: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Rjdpeb Ez R Uofx Apbsu Required space: 600 x 450 x 175 mm Weight: approx. 100 kg

Stanje: rabljeno, Clamping Plate – Table of a Long Planer Machine – Table Width / Clamping Width: 1845 mm Table Length / Clamping Length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M30 T-slot spacing: 263 mm Total length: 6230 mm Total plate height: 350 mm Weight: 11 t Rodpfx Asbn Amfjpbju

Stanje: novo, Welding positioners (turntables) increase work flexibility, productivity, and quality. Turntables also assist the welder during operations, ensuring a safe working environment and improved ergonomics. The main advantage of PEMA positioners is that workpieces can always be set to the optimal welding position. This can increase welding productivity by up to 70%. Rjdog Urz Hepfx Apbeu 50 years of productive, high-quality welding – for half a century, we have been designing and manufacturing welding positioners for demanding and heavy workpieces. Pemamek welding positioners combine modern design with reliable, efficient technology and can be seamlessly integrated into any other PEMA solution. Each of our welding positioners is designed in-house and manufactured using high-quality components. We are the official PEMA representative for Southern Germany. We still have several APS older generation positioners in stock. The new APSI generation is already available from stock.

Stanje: novo, Popolnoma avtomatizirani stroji za profiliranje trapezne pločevine so na voljo v različnih dimenzijah. Za dodatne informacije in tehnično dokumentacijo nas prosimo kontaktirajte. Rodpjyr Nkbjfx Apbsu

Leto izdelave: 2009, stanje: dober (rabljeno), številka stroja/vozila: 120P1109, OFFER 21407 Motorized Vessel/Drum Rotator with Rail-Mounted Carriage Technical Specifications: - Total load capacity (powered + idler unit): 40,000 kg - Load capacity per vessel rotator: 20,000 kg - Workpiece diameter approx.: 500 – 3,500 mm - Support roller center distance adjustable via trapezoidal-thread spindle - Roller diameter: 500 mm Rsdpfxehcnhmj Apbeu - Roller width: 150 mm - Powered unit with dual-side drive - Infinitely variable rotation speed - Handheld remote for forward and reverse operation - Drive: 400 V - Both units mounted on rail carriages - Required space for powered unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Required space for idler unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight powered unit: approx. 2,500 kg - Weight idler unit: approx. 1,800 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, leto zadnje generalne obnove: 2025, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. Rsdevf E Avepfx Apbeu The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna višina: 1.020 mm, gradbena višina: 410 mm, dvižna višina: 600 mm, lastna masa: 150 kg, nosilnost: 350 kg, skupna dolžina: 1.900 mm, skupna širina: 740 mm, trajanje garancije: 24 meseci, NIVEAU - Scissor Lift Table HS 350 Gross without worktop Description: - Mobile scissor lift table with double horizontal scissors, basic version without worktop; with platform base frame for mounting various worktops; equipped with 4 swivel castors, 2 of which have brakes; wheel diameter 125 mm; operated via foot pump Rodoh A Hxijpfx Apbou Load capacity in kg: 350 Weight in kg: 150 Useful lift in mm: 610 Construction height in mm: 400 Total height in mm: 1010 Platform size in mm: 1900 x 740

Stanje: dober (rabljeno), The driven tools listed here, VDI 50, are designed for a tool turret manufactured by SAUTER. They are in good condition and fully functional, previously used on a GILDEMEISTER CTX 600 CNC lathe. 6 x driven tools, straight type, manufacturers NACKE + WTO, VDI 50 for SAUTER tool turret: Rjdpfjbql S Hsx Apbsu Article No.: XVI 24275 1 drilling and milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.1, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €545.00 plus statutory VAT Article No.: XVI 24277 1 drilling and milling tool, straight type, manufacturer: NACKE, VDI 50 mm, similar to DIN 69880, No. 40.5040 / 80 96 / 027.3, collet Ø 25 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €400.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Article No.: XVI 2687 1 drilling and milling tool, straight type, manufacturer: WTO, VDI 50 mm, similar to DIN 69880, collet Ø 32 mm, SAUTER drive B 20 x 17 DIN 5482 Price: €650.00 plus statutory VAT Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Stanje: novo, Leto izdelave: 2023, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 5.200 kg, vrsta goriva: dizel, barva: bež, moč: 513 kW (697,49 KM), izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 408 kW (554,72 KM), nazivna (navidezna) moč: 510 kVA, neprekinjena moč: 368 kW (500,34 KM), skupna dolžina: 4.460 mm, skupna širina: 1.606 mm, skupna višina: 2.493 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: Doosan, vrsta hlajenja: voda,