Delem nakup rabljenega (229)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Press force: 1700 kN, bending length: 4000 mm, stroke: 215 mm, installation height: 365 mm, clearance width: 3680 mm, throat depth: 410 mm, feed rate: 200 mm/s, bending speed: 1–10 mm/s, return speed: 135 mm/s, working height: 1050 mm, control unit: Delem. Includes spare parts and accessories. Documentation available. Isdpfx Aotqfqish Aoik

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: P020504, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: polavtomatski, vrsta aktuacije: hidravlični, proizvajalec krmilnikov: Delem, model krmilnika: DA-66W, upogibna sila (maks.): 130 t, delovna širina: 3.150 mm, hod: 350 mm, globina grla: 500 mm, razdalja med stojali: 2.600 mm, vgradna višina: 550 mm, obratovalna hitrost: 10 mm/s, hitrost vzvratne vožnje: 115 mm/s, število osi: 6, višina mize: 950 mm, tip kronanja: CNC krmiljen, kapaciteta rezervoarja za olje: 160 l, potovalna razdalja osi X: 500 mm, nastavitev zadnjega prislona: CNC krmiljen, hitrost zadnjega prislona os R: 100 mm/s, Razdalja pomika zadnjega prislona, os R: 160 mm, skupna masa: 13.500 kg, skupna dolžina: 2.300 mm, skupna širina: 4.000 mm, skupna višina: 3.100 mm, moč: 15 kW (20,39 KM), vhodna napetost: 400 V, vhodni tok: 35 A, vhodna frekvenca: 50 Hz, Oprema: CE označba, dokumentacija / priročnik, evropski sistem vpenjanja orodij, nujno zaustavitev, spodnje orodje, varnostna svetlobna zapora, zgornje orodje, Offered machine: Used CNC hydraulic press brake Make: CR Electronic Model: GOLD 130/31 Year of manufacture: 2004 Control: Delem DA-66W (8-axis capable) Condition: used, operational (Z-axes currently out of service, see below) Technical data: - Press force: 1,300 kN (130 t) - Bending length: 3,100 mm - Distance between uprights: 2,600 mm - CNC-controlled axes: Y1, Y2, X, R, Z1, Z2 (Note: Z1 and Z2 are currently electronically out of service – new servo drives required. Manual operation possible.) - Stroke: 350 mm - Installation height: 550 mm - Throat depth: 500 mm - Backgauge (X): 600 mm - Table height: 950 mm - Working speed: 10 mm/s - Return speed: 115 mm/s - Motor power: 11 kW Iedjw A Rggjpfx Ah Aoik - Operating pressure: 275 bar - Weight: approx. 13,500 kg Equipment & features: - CNC-controlled hydraulic crowning system - Quick-change tool clamping for upper tools (manual) - System tool holders top and bottom - Laser optical finger protection (safety light curtain) - PLC-based diagnostic system - 2 support arms with quick adjustment - Operating manuals available - CE-compliant Included accessories: - Fully equipped tool cabinet - Upper tool 88°, machine length - Upper tool 35°, machine length - Radius bending upper tool - V8 T-die, machine length - V12 T-die, machine length - Flattening die, approx. 2,000 mm length Condition / remarks: - Machine is in well-maintained condition, currently connected to power - Inspection and test run under power possible on site - Z1/Z2 currently not operational – new servo drives required - Machine is being sold due to a planned upgrade and installation of a new press brake. Price: €26,500 net (plus VAT) Negotiable for quick and uncomplicated purchase.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you the highest precision and efficiency with a capacity of 3050 mm bending length and 175 tons. Benefit from our comprehensive all-in-one service: we take care of transport, installation, commissioning, and offer you a one-year warranty as well as fast and reliable service. Visit us and see for yourself the quality and versatility of this high-class machine. Standard equipment Capacity (length - tonnage): 3050 mm – 175 t Installation height: 530 mm Ijdpfxjtr Dk Ej Ah Aeik Throat depth: 450 mm Stroke: 265 mm Servo drive Y1, Y2, X – 3 axes Control unit – DT 15 Manual F. AKAS FPSC safety system CE-certified Fiessler Akas Servo-motorized back gauge & linear guide & ball screw system Manual crowning European-style tool clamping Adjustable front support arms Options - DELEM 69S control unit (3D controller) - Motorized crowning - 6-axis (X=650 mm, Y1, Y2, X, R, Z1, Z2 – 6-axis controlled press brake) - European lower tool M.460R.85 - European upper tool P135.75.R08

Leto izdelave: 2006, Stanje: skoraj kot novo (rabljeno), Rushworth Baykal APHS 3106×120, 3-metrska x 120-tonska hidravlična CNC stiskalnica (pressbrake) z navzdol gibajočo batnico – naprodaj Zelo čista, navzdol gibajoča 4-osna CNC stiskalnica Baykal naprodaj – vključno z veliko količino orodja. Leto izdelave: 2006 Model: APHS 3106 x 120 Euro orodje Skupno 4 osi: Y1, Y2, X in R os Wila sistem kompenzacije upogiba (crowning) 4 prijemala (fingers) na zadnjem omejevalniku, idealno za dodatno podporo pri prepogibanju celotne 3-metrske dolžine in natančnem delu z majhnimi kosi Velik izbor orodja 49 cm svetle višine Euro vpenjala za orodje Hitro sproščujoča vpenjala Sodoben CNC krmilnik Delem DA-56 z USB vmesnikom Hidravlična pressbrake z navzdol gibajočo batnico Možna dobava, montaža in izobraževanje Iodpoikfz Dsfx Ah Ajik

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Tehnični podatki: Delovna dolžina: 3050 mm Razdalja med stebri: 2690 mm Tlačna sila: 130 t CNC krmiljenje: DELEM Nastavljiv zadnji prislon Upravljane osi: Z1 / Z2; X; R CNC nadzorovana bombiracija Vgradna višina: 535 mm Hod: 365 mm Iiedsw Tcncopfx Ah Ask Izvlek: 410 mm Hidravlično vpenjanje orodja zgoraj in spodaj Merilni sistem hoda bata z vzmetno kompenzacijo preko steklenih merilnih letev Programirano premikanje spodnjega orodja (I-os) za 2 poziciji Moč motorja: 12,5 kW Število prislonskih prstov: 2 CE oznaka Dimenzije (D x Š x V): pribl. 3800 x 2350 x 3150 mm Teža: pribl. 14 ton Stanje: dobro stanje Prodajalec ne prevzema odgovornosti za tipkarske ali prenosne napake. Stroj je, kar se tiče videza, tehnike in obrabe, primeren svoji starosti; rabljeni stroji se prodajajo brez kakršnekoli garancije.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Machine in good and well-maintained condition. Easy-to-use Delem backgauge control. Cutting gap manually adjustable. Backgauge spindles/nuts overhauled. Specifications: Cutting length: 1250 mm Cutting capacity: 4 mm steel Delem backgauge control Strokes/hour counter Iiedpfxeiivxfs Ah Aek Year of manufacture: 1984

Leto izdelave: 2006, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 138883, TECHNICAL DETAILS Pressing force: 160 t Bending length: 4100 mm Distance between uprights: 3100 mm Control system: DELEM DA66W Isdpfslp Iq Rex Ah Aoik Table width: 120 mm Stroke: max. 800 mm Downward speed: 80 mm/sec Upward speed: 80 mm/sec Working speed under load: 8 mm/sec MACHINE DETAILS Oil capacity: 185 l Total power requirement: 24 kW Machine weight: approx. 13 t Space requirements: approx. 4.8 x 2.2 x 2.2 m

Stanje: pripravljen za uporabo (rabljen),

Leto izdelave: 2024, Stanje: novo, The DA-69T control system offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The complete 3D machine setup covers multiple tool stations and provides instant feedback regarding the feasibility and handling of the product. Delem-69T Features: • 3D and 2D graphical touchscreen programming operation • 3D visualization in simulation and production • 17-inch high-resolution TFT color display • Complete Windows application suite • Compatible with Delem Modusys (module scalability and adaptability) • USB and peripheral interface • Open system architecture • Sensor bending and correction interface • Profile-T3D offline software • Major contribution to environmental protection, climate change, and the greenhouse effect; future generations will thank us! AD-S 30175 with Y1, Y2, X and R axes Bending force: 175 tons Bending length: 3050 mm Clearance between uprights: 2600 mm Rapid traverse speed: 120 mm/sec Working speed: 10 mm/sec Return speed: 100 mm/sec Installation height, tool clearance, and ram depth of your press brake: 30 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 pc Backgauge fingers: 2 pc Press force and speed of the press brake. X-axis: 500 mm/sec X-axis travel: 650 mm Max. R axis speed: 350 mm/sec R axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 liters Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight: approx. 11,500 kg Control: Delem-69T Iedpfx Ahjd Tpado Ajik Options: Y1, Y2, X, R (4-axis) X=650mm X, R Control – CNC Cybelec ModEva 19T DBEND 3D CAD/CAM import & simulation software CNC-controlled hydraulic crowning Movable front support arms with T-slot, quick stop, and full-length guide Backgauge: Siemens DC servo motor with linear guide and ball screw system Protective cover CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) Wila hydraulic upper tool – NSCL-I-HC/UPB – PRO – Max load 180 t/m – Powerpack required Wila hydraulic lower tool – NSCR-I-HC-CNC/UPB – PRO – Max load 200 t/m – Powerpack required Powerpack for hydraulic clamping DAM (Durma angle measuring system) 2 YEARS WARRANTY The machine can be inspected and demonstrated at any time by appointment in our showroom in Staufenberg. Additional machines are ready for demonstration at our facility in Staufenberg. Further information is available upon request.

Leto izdelave: 2010, Stanje: skoraj kot novo (rabljeno), Usata pressa piegatrice CNC Trumpf Trubend Serie 3000 in vendita VIDEO QUI SOTTO: Trumpf Trubend 3120 usata in vendita, 3 metri x 120 tonnellate, piegatrice CNC a 6 assi in vendita. Marca/fabbricante: TRUMPF Modello: TRUBEND 3120 Tipo: Presse piegatrici idrauliche CNC Anno: 2010 Ubicazione: Regno Unito Basse ore di utilizzo – 14.000 Specifiche Tonnellaggio: 119,7 t / 120 ton Tipo: corsa verso il basso idraulica Lunghezza totale: 3,1 m / 3 metri Altezza BH: 2,7 m Corsa: 199,9 mm Numero di assi: 7 assi 5 assi asse battuta posteriore Peso: 8.300 kg (18.298 lbs) Controllo CNC (T3000) Pressa piegatrice Trumpf TruBend 3120 CNC – 132 ton x 3 m Anno: 2010 Specifiche dalla fabbrica: Macchina – Struttura stabile in acciaio saldato – Traverso altamente resistente alla torsione – Sospensione sferica del traverso con inclinazione – Azionamento elettroidraulico con tecnologia a 4 cilindri – Tecnologia valvole proporzionali – Idraulica moderna a blocco – Bilanciamento elettronico della pressione – Sistema di misura con righe ottiche e compensazione della flessione del telaio – Olio idraulico riempito in macchina (lubrificazione a vita) – Raffreddatore olio Sistema battuta posteriore – Sistema a 2 assi con trasmissione a cremagliera per assi X e R – 2 dita di battuta anteriore regolabili in sicurezza Portautensili – Bloccaggio superiore TRUMPF, manuale e temprato – Bloccaggio inferiore manuale e temprato Bombatura – Sistema di bombatura autoregolante – CNC-bombatura idraulica aggiuntiva Controllo – Controllo macchina: T3000 a colori, DELEM su base Windows Real Time – Interfacce USB per tastiera, mouse, ecc. Sicurezza – Pedale per salita, discesa e arresto di emergenza – Sicurezze: porte laterali e serranda manuale posteriore Servizi – Installazione, avviamento e formazione Opzioni sistema battuta posteriore – Sistema a 5 assi Opzioni portautensili – Bloccaggio rapido stile Amada US (segmentato su tutta la lunghezza di lavoro) Opzioni dispositivi di sicurezza – BendGuard Opzioni movimentazione lamiera – Bracci di supporto (2 pz) Consegna: giugno 2011 Video sotto: Disponibili a magazzino anche presse piegatrici CNC Trumpf serie V e C usate. Siamo sempre interessati all’acquisto di presse piegatrici e altre macchine Trumpf usate come: TruBend 3066, TruBend 3100, TruBend 3170 TruBend Serie 5000 TruBend 5085, TruBend 5130 Iiedpshtm Iksfx Ah Ask TruBend Serie 7000 TruBend 7036, TruBend 7050 TruBend Serie 8000 TruBend 8230, TruBend 8400

Stanje: novo, Leto izdelave: 2024, Bending length: 900 mm Column gap: 900 mm Pressing force: 20 t Throat depth: 230 mm Max. stroke length: 150 mm Travel path - X: 350 mm - New machine - - Electric ball screw drive with 1 screw - - Pressing force 20 t - Equipped with DELEM DA-53 T CNC control, fast X-axis backgauge, manual finger width adjustment, laser safety system AKAS LC II M, LED work area Iijdjwp Ti Ropfx Ah Aok lighting, work table, various punches and dies * For more information on the exact standard equipment and available options, visit us online or contact us directly *

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000,

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, številka stroja/vozila: 885669, upogibna sila (maks.): 130 t, delovna širina: 3.050 mm, hod: 365 mm, globina grla: 410 mm, razmak između stupova: 2.800 mm, TECHNICAL DETAILS Press force: 130.0 t Working area Working width: max. 3,050 mm Stroke max.: 365 mm Throat depth: 410 mm Distance between columns: 2,800 mm Number of axes: 6 Iiodpsw Dqckjfx Ah Aok Control system Control: CNC Control type: Delem DA65 Controlled axes: Y1-Y2 + X-R-Z1-Z2 + I + crowning MACHINE DETAILS Dimensions and weight Overall length: 3,500 mm Overall width: 2,200 mm Overall height: 2,400 mm Weight: 11,000 kg EQUIPMENT WILA hydraulic clamping Angle measuring system Documentation CE marking

Leto izdelave: 1998, Stanje: dober (rabljeno),

Leto izdelave: 2024, Stanje: novo, The DA-69T controller offers both 2D and 3D programming, including automatic calculation of bending sequences and collision detection. Complete 3D machine setup covers multiple tool stations and provides instant feedback on product feasibility and handling. DA-69T Features: • 3D and 2D graphical touchscreen programming operation • 3D visualization in simulation and production modes • 17-inch high-resolution TFT color display • Full Windows application suite • Compatible with Delem Modusys (modular scalability and adaptability) • USB and peripheral interface • Open system architecture • Sensor bending and correction interface • Profile-T3D offline software • Significant contribution to environmental protection – combating climate change and the greenhouse effect for the benefit of future generations. • Fully electronic drive • Up to 30% higher productivity • Up to 50% energy savings thanks to start-stop technology • Faster than a hydraulic press brake • Lower operating costs • Significantly reduced service and spare part costs (the electric press brake is technically much simpler and nearly maintenance-free) • No harmful oils required • Quiet – efficient – independent of hydraulic oil – low-noise operation • More relaxed and stress-free bending • Full working area • Touchscreen operation Machine dimensions: (L x W x H): 2,150 mm x 1,650 mm x 2,800 mm Technical details: Bending length: 1,250 mm Clear distance between uprights: 1,300 mm Pressing force: 400 kN (40 tons) Controller: CNC ModEva 19T Backgauge controlled axes: X, R (Z optional) Stroke length: 200 mm Installation height: 440 mm Table width: 104 mm Table height: 1,000 mm Throat depth: 410 mm X-axis travel range: 650 mm X-axis travel speed: 500 mm/s Approach speed (Y): 180 mm/s Bending speed (Y): 20 mm/s Working speed (R): 350 mm/s R-axis travel range: 250 mm Motor power: 7.5 kW Weight: approx. 4,500 kg Standard equipment: Cybelec ModEva 19T controller CNC-controlled crowning Upper clamping system: Durma (European) Lower clamping system: 60 mm holder Backgauge: AC servo motors with ball screw drive Options included: Iodpfx Ahed Sak Se Aeik Fiesseler AKAS II M FPSC-B-C safety system Controller: Delem DA 69T CNC-controlled backgauge X, R, Z1, Z2 Hydraulic upper tool clamping Durma (Type Wila) Hydraulic lower tool clamping Durma (Type Wila) Hydraulic power pack for clamping D-Bend simulation software The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. More machines are available, ready for demonstration, at our Staufenberg facility. Further information is available on request.

Stanje: novo, Leto izdelave: 2024, Bending length: 900 mm Distance between uprights: 900 mm Press force: 20 t Throat depth: 230 mm Max. stroke length: 150 mm X-axis travel: 350 mm - New machine - - Electric ball screw drive with 1 spindle - - Press force 20 t - Equipped with DELEM DA-53 T CNC control system, fast X-R back gauge, manual finger adjustment, AKAS LC II M laser safety system, LED work area lighting, upper tool clamping and work table Iiedpfjwp Th Hox Ah Aek * For more information on the exact standard equipment and available options, please visit our website or contact us directly *

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Technical Data: Working length: 2,600 mm Frame gap: 2,150 mm Press force: 45 t CNC control: DELEM DA 66 W Controlled axes: Y1/Y2; X; R; Z1/Z2 Motorized adjustable backgauge with 4 stops Throat depth: 310 mm Working height: 930 mm Motor power: 5.5 kW CE marking Dimensions (L x W x H): approx. 3,000 x 2,150 x 2,150 mm Isdpewd Uinsfx Ah Ajik Weight: approx. 5 tonnes Accessories: 1 set of standard tooling Condition: The machine is in very good condition. The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are commensurate with its age; used machines are sold without any warranty.

Leto izdelave: 2024, obratovalne ure: 32 h, Stanje: novo, Manufacturer: DURMA Model: AD-S 30175 Year of manufacture: 2020* Bending length: 3050 mm Pressing force: 1750 kN Control system: DELEM DA-66T Operating hours: 32 h Backgauge controlled axes: X, R, Z1, Z2, +Delta X +/-125 mm, CNC controlled Distance between uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Throat depth: 410 mm X-axis travel: 650 mm X-axis travel speed: 500 mm/s Iiedpfodx Nluex Ah Ajk R-axis travel: 250 mm Approach speed: 160 mm/s Bending speed: 10 mm/s Return speed: 100 mm/s Dimensions (L/W/H): approx. 4250 x 1700 x 2750 mm Weight: approx. 11,500 kg Standard equipment: Y1, Y2, X, R – X=650 mm Control system: CNC Cybelec ModEva 19T – PC 1200 3D SW D-BEND 3D CAD/CAM import & simulation software CNC-controlled motorized crowning European style tool clamping system 60 mm die holder (suitable only for European style dies) Throat depth 410 mm 2 front support arms with T-slot and tilting stop, movable from the front Backgauge system: Siemens DC servo motorized with linear guide and ball screw Safety covers CE marking Extended equipment: Safety system in compliance with CE standard for EU: FIESSLER AKAS-3P motorized + FPSC (SAFETY PLC) Backgauge controlled axes: X, R, Z1, Z2, +Delta X +/-125 mm CNC controlled Control system: DELEM DA-66T Hydraulic upper tool clamping Wila NSCL-II-HC/UPB – PREMIUM – 250 t/m Hydraulic lower tool clamping Wila NSCR-II-HC-CNC/UPB – PREMIUM – 300 t/m Powerpack for hydraulic clamping AP3-AP4 bending aids, motorized height adjustment – max. load capacity 125 kg per unit Oil cooler This machine is manufactured to customer specifications. Further machines are available for demonstration at our Staufenberg facility. Further information is available upon request.

Stanje: novo, Leto izdelave: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As the manufacturer, we offer you maximum precision and efficiency, with a capacity of 3050 mm bending length and 175 tonnes. Benefit from our comprehensive all-in-one service: We handle transport, installation, commissioning, and provide a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this top-class machine for yourself. Standard Equipment - Capacity (Length x Tonnage): 3050 mm x 175 t - Daylight Opening: 530 mm - Throat Depth: 450 mm - Stroke: 265 mm - Y1, Y2, X – 3 axes - Control unit: DT 15 - Manual F. AKAS FPSC safety system - CE F.AKAS BVLT light curtain and safety enclosures (for tandem press brakes) - Servo-driven backgauge with linear guides & ball screw system (X) Iijdpfx Asttatboh Aek - Manual crowning - European-style tooling clamping system - Movable front support arms - Special design hydraulic block and valves in accordance with global standards - Electrical equipment compliant with international standards Selected Options - Control unit – Delem 66S – NEW - Motorized crowning - X = 650 mm X, R, Z1, Z2 (6-axis CNC press brake) - European lower tool M.460R.85 - European upper tool P135.75.R08

Leto izdelave: 2024, Stanje: novo, Manufacturer: DURMA Model: AD-R 40400 Year of manufacture: NEW Bending length: 4050 mm Clearance between uprights: 3400 mm Stroke: 365 mm Installation height: 630 mm Throat depth: 510 mm Table height: 1050 mm Table width: 154 mm Y-axis rapid traverse: 140 mm/sec Y-axis working speed: 8 mm/sec Y-axis return speed: 120 mm/sec X-axis working speed: 250 mm/sec R-axis travel: 250 mm Motor power: 37 kW Length: 5750 mm Width: 2110 mm Height: 3540 mm Weight: approx. 25,000 kg Standard equipment Control unit: CNC Cybelec ModEva 19T CNC-controlled motorized crowning system European tool clamping system, or Durma clamping system upon customer request Extended equipment: Ijdpfx Ahod Hy Hue Ajik Safety system according to CE standard for the EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Backgauge controlled axes: X1, X2, R1, R2, Z1, Z2 Controller: DELEM DA-66T Choice of Delem 66T – 69T or Durma controller DAM – Durma angle measuring system Hydraulic upper tool clamping: Wila NSCL-I-HC/UPB – PRO – 180 t/m Hydraulic lower tool clamping: Wila NSCR-I-HC-CNC/UPB – PRO Power pack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation software AP3 & AP4 bending aids Selectable from 750 mm to 1500 mm Parking area for support arms (1000 mm) TANDEM setup preparation Laser bending line Oil heating Centralized lubrication, manual or motorized Cabinet air conditioning Other machines are available for demonstration at our site in Staufenberg. Further information available upon request.

Stanje: novo, Leto izdelave: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As the manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm bending length and 320 tons. Benefit from our comprehensive all-in-one service: We take care of transport, installation, and commissioning, and provide a one-year warranty as well as fast and reliable support. Visit us and see for yourself the quality and versatility of this top-tier machine. DURMA Press Brake AD-S 30320 Standard Equipment Capacity (Length x Tonnage): 3050 mm x 320 t Daylight: 630 mm Throat Depth: 450 mm Stroke: 365 mm Y1, Y2, X – 3 axes Control Unit – DT 15 CE Fiessler Akas manual light curtain Iedpfst Dvl Uox Ah Aoik Servo-driven backgauge & linear guides Manual crowning European-style tool clamping system Moveable front support arms Hydraulic block and valves built to global standards Electrical system in accordance with international standards Options: Delem 66T Motorized Crowning Motorized Backgauge for X and R axes (X=650 mm, X and R) European bottom tool M.460R.85 European top tool P135.75.R08

Leto izdelave: 2024, Stanje: novo, Bending force: 2200 kN Bending length: 3050 mm Clearance between uprights: 2600 mm Stroke length: 265 mm Throat depth: 410 mm Installation height: 530 mm Operating speed Y: 10 mm/sec Motor power: 18.5 kW Operating speed X: 500 mm/sec Backgauge travel (motorized): 350 mm Length: 4250 mm Width: 1700 mm Height: 2750 mm Weight: 11,500 kg Standard equipment: Y1, Y2, pressure beam axes (individually controllable) CNC-controlled X and R axes CNC control unit – ModEva 15T Backgauge servomotor & linear-guided ball screw system (X–R) (AL) CNC-controlled crowning system Iijdpfx Ajd Afxkeh Aek European-style tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves to global standards Electrical equipment to international standards Optional equipment: DELEM DA-66T control (2D graphical, 3D visualization) Bending upper tool H=66.5 (one segmented) Bending lower tool 4V die (one segmented) D-Bend 3D CAD/CAM import & simulation software

Leto izdelave: 2024, Stanje: novo, Axes: Y1, Y2, X, R Iisdpfxefin Hcs Ah Aek Control: Delem 66 T or 69 T selectable CE standard with manual Fiessler AKAS II M -FPSC-B-C + safety cover & switch Durma upper tool Durma lower tool CNC-controlled motorized crowning Throat depth standard 510 mm or selectable 750 mm, 1000 mm Backgauge: motorized & linear guide & ball screw system Backgauge fingers height adjustable Backgauge motor: AC type Moveable support arms with linear guide along the entire length Technical data available on request

Stanje: novo, Leto izdelave: 2024, Are you looking for a powerful press brake that can handle even the most demanding requirements? The Durma press brake AD-S 803000, featuring a pressing force of 3,000 tons, could be the perfect solution for your needs. With an impressive bending length of 8 meters and a stroke of 750 mm, this machine is capable of processing large and heavy materials with the utmost precision. The installation height of 1,000 mm allows for flexible and convenient positioning of the workpiece. At the heart of the machine is the movable DELEM-DA 66T control unit, ensuring intuitive operation and precise control of the work process. Additionally, this press brake is a custom-built solution and can be configured to meet all your individual requirements. If you are interested in the Durma press brake, we are happy to provide you with personal consultation. Other machines are also available and can be inspected on site. Feel free to contact us for more information and let us work together to find a bespoke solution tailored to your needs. Control type: DELEM DA-66T Protective oil: suitable for sea transport Front safety system: FPSC (MANUAL) Sheet support arms: Movable support arm Stroke: 750 MM Backgauge type: X=1500 X, R Throat depth: 1050 MM Crowning: Hydromechanical Installation height: 1000 MM Power supply: 400V 50HZ Frame type: Welded construction Lower tool holder: DURMA Wide Ijdpfxji Da Sys Ah Ajik

Stanje: novo, Leto izdelave: 2024, Press Brake AD-S 40220 | 4 Meters 220 Tons Fully configurable upon request, with very short production and delivery times. Further information available upon request. Technical Data: • Bending capacity: 220 tons • Bending length (mm): 4050 • Distance between uprights (mm): 3600 • Stroke (mm): 265 • Installation height (mm): 530 • Throat depth (mm): 410 • Table height (mm): 900 • Table width (mm): 104 • Y-axis rapid traverse (mm/sec): 160 • Y-axis working speed (mm/sec): 10 • Y-axis return speed (mm/sec): 140 • X-axis working speed (mm/sec): 250 • R-axis working speed (mm/sec): 140 • R-axis travel: 250 • X-axis distance (mm): 650 • Motor power: 22 kW • Length: 5250 mm • Width: 1770 mm • Height: 2900 mm • Weight: 14,750 kg Standard Equipment • CNC control: Cybelec ModEva 19T • CNC-controlled motorized crowning • European tool clamping system / or optional DURMA clamping system Extended Equipment: • CE-compliant safety system for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) • Controlled axes for backgauge: X1, X2, R1, R2, Z1, Z2 • Control: DELEM DA-66T • DELEM 66T – 69T or DURMA control selectable • DAM – Durma angle measurement system Iiodofirx Djpfx Ah Aok • Hydraulic upper tool clamping: Wila NSCL-I-HC/UPB – PRO – 180 t/m • Hydraulic lower tool clamping: Wila NSCR-I-HC-CNC/UPB – PRO • Hydraulic clamping power pack • D-BEND 3D CAD/CAM import & simulation software • AP3 & AP4 bending aids • 750 mm to 1500 mm selectable • Parking area for support arms (1000 mm) • Tandem preparation • Laser bending line • Oil heater • Central lubrication, manual or motorized • Air conditioning for control cabinet