Briketi Tiska nakup rabljenega (4.377)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price Another machine immediately available (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent value for money + Suitable for continuous operation + Long-established, reliable machine Includes control cabinet with timer operation The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5-40 mm (material-dependent) Throughput capacity: up to 20 kg/h max. (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Material requirements: - Wood shavings and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals, and minerals accelerate wear --- Options at extra cost: - Timer function + €490 (net) Machine is started manually and switches off automatically after set time X. - Fill level sensor for automatic operation + €1,450 (net) Press starts and stops automatically * NEW!!! Now available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 (net) (delivery time approx. 8 weeks) Rodod Nnwljpfx Agtjt - Special pressing units + €2,950 (net) ---

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Redpfx Aofci D Aegtet Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Stanje: novo, Leto izdelave: 2025, Various models also available! Redpogwa Urjfx Agtot 1. Briquette diameter: Ø 80 mm 2. Capacity: 700-900 kg / hour (copper) 3. Preliminary ram force: 12.5 tons 4. Main compression cylinder force: 250 tons (5 tons / cm²) 5. Maximum operating pressure: 300 bar 6. Cycle time: 12 - 14 sec 7. Electric motor power: 30 kW 8. Machine dimensions (width x length x height): 2200 mm x 2600 mm x 2800 mm 9. Machine weight: 6,000 kg 10. Screw conveyor feeds automatically fill the compression chamber, and the integrated vibrating hopper ensures chamber safety by preventing oversized material from entering. 11. Cylinder rods are induction hardened and chrome-plated. 12. Hydraulic oil cooling system implemented. 13. Hydraulic system pumps and valves are sourced from globally renowned brands such as PARKER. 14. The machine is fully automatic with PLC control. 15. All electrical and electronic components are SCHNEIDER or SIEMENS brand. 16. The machine is CE-certified. The marking verifies compliance with European directives regarding consumer safety, health, or environmental requirements. 17. The machine is backed by an AYMAS Makina San. Ve Tic. Ltd. Şti. warranty against manufacturing defects for one (1) year or three thousand (2,500) operating hours.

Stanje: novo, Leto izdelave: 2025, Various models available! 1. Briquette diameter: Ø 160 mm 2. Capacity: 4,500 - 5,500 kg/hour (iron and steel) 3. Preliminary compaction force: 50 tons 4. Main compression cylinder pressure: 600 tons 5. Maximum operating pressure: 300 bar 6. Cycle time: 12 - 14 seconds 7. Electric motor power: 170 kW total 8. Machine dimensions (width x length x height): 5,200 mm x 8,000 mm x 3,100 mm Rsdpfx Aogv I Ihsgtst 9. Machine weight: 42,000 kg 10. Screw conveyor feeders automatically fill the compression chamber and the built-in vibrating hopper ensures chamber safety by preventing oversized material from entering. 11. Cylinder rods are induction-hardened and chrome-plated. 12. Hydraulic oil cooling system implemented. 13. Hydraulic system pumps and valves are from PARKER or BOSCH-REXROTH brands. 14. Machine is fully automatic via PLC control. 15. All electrical and electronic components are SCHNEIDER or SIEMENS brand. 16. The machine is CE certified. The marking certifies that the product complies with European directives regarding consumer safety, health, or environmental standards. 17. The machine is supplied under the AYMAS Makina San. Ve Tic. Ltd. Şti. warranty against manufacturing defects for one (1) year or three thousand (2,500) operating hours.

Stanje: novo, Leto izdelave: 2025, Various models available! 1. Briquette diameter: Ø 200 mm 2. Capacity: 12,000 kg/hour (steel) 3. Preliminary pressure stroke: 50 tons 4. Main compression cylinder pressure: 800 tons 5. Maximum operating pressure: 300 bar 6. Cycle time: 10 - 12 seconds 7. Electric motor power: 6x37=222 kW (main motors) 8. Machine dimensions: 11,000 mm x 10,000 mm 9. Machine weight: 60,000 kg 10. Screw conveyor feed automatically fills the compression chamber, and the integrated vibrating hopper ensures chamber safety by feeding oversized material into the chamber. 11. Cylinder rods are induction-hardened and chrome-plated. 12. Hydraulic oil cooling system is implemented. 13. Hydraulic system pumps and valves are from leading brands PARKER or BOSCH-REXROTH. 14. The machine operates fully automatically via PLC control. 15. All electrical and electronic components are supplied by SCHNEIDER or SIEMENS. 16. The machine is CE certified. The CE marking certifies that the product meets European guidelines regarding consumer safety, health, and environmental protection. 17. The machine is covered by an AYMAS Makina San. Ve Tic. Ltd. Şti. warranty against manufacturing defects for one (1) year or three thousand (2500) operating hours. Rsdpfx Aegv I N Ujgtet

Stanje: novo, Leto izdelave: 2025, Various models available! 1. Briquette diameter: Ø 120 mm 2. Capacity: 1,800 – 2,200 kg/hour (iron and steel) 3. Preliminary compression force: 15 tonnes 4. Main compression cylinder pressure: 400 tonnes 5. Maximum operating pressure: 300 bar 6. Cycle time: 12 – 14 seconds 7. Electric motor power: 75 kW 8. Machine dimensions (width x length x height): 3,200 mm x 4,200 mm x 3,500 mm 9. Machine weight: 13,000 kg Rodpfxsdfc Iko Agtjt 10. Screw feed mechanisms automatically fill the compression chamber, and the integrated vibrating hopper ensures chamber safety by managing oversize material that enters the chamber. 11. Cylinder rods are induction-hardened and chrome plated. 12. Hydraulic oil cooling system implemented. 13. Hydraulic system pumps and valves are from PARKER or BOSCH-REXROTH brands. 14. Machine is fully automated via PLC control. 15. All electrical and electronic components are supplied by SCHNEIDER or SIEMENS. 16. The machine is CE-certified. The marking verifies that the product complies with European directives regarding consumer safety, health, or environmental standards. 17. The machine is covered by an AYMAS Makina San. Ve Tic. Ltd. Şti. warranty against manufacturing defects for one (1) year or three thousand (3,000) operating hours.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, obratovalne ure: 56.927 h, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: ATM Recyclingsystems GmbH Tip: ArnoBrik 15 Leto izdelave: 2001 Premer briket: 150 mm Tehnični podatki Premer briket 140 oziroma 150 mm Kapaciteta: - litoželezni ostružki 4,8 – 5,3 t/h - jekleni ostružki 4 - 5 t/h - mešano briketiranje 4 – 5 t/h - aluminijasti ostružki 1,6 - 1,8 t/h Mešano briketiranje 4 - 4,5 t/h Žica pnevmatik 2,5 – 3 t/h Urna zmogljivost je odvisna od materiala Gostota briket pri jeklu in litini 5,5 kg/dm³ Obratovalni tlak 300 bar Rsdpfx Agsxy E H Hetot Zahtevan prostor (D x Š x V) 13.500 x 6.500 x 2.000 mm Teža stroja 30 t Glavna sila cilindra 5.300 kN Poraba olja 2.800 litrov Glavni pogon 4 x 30 kW Priključna moč z dodatki ca. 150 kW Višina briket 110 - 140 mm Teža briket - odvisno od materiala približno 10 - 16 kg Cikel časa približno 10 sekund

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Nadomestni deli za briketirne stiskalnice ATM Recyclingsystems GmbH, Lindemann Germany GmbH, Danieli Henschel GmbH, RUF, Ayamas, Lokacija: Avstrija Na voljo takoj Rsdoxy Nkpjpfx Agtjt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 7.822 h, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: ATM Tip: ArnoBrik 10 Letnik izdelave: 2014 Premer briketa: 105 mm Tehnični podatki Glavne dimenzije Dolžina x širina x višina: 4.250 x 3.600 x 2.200 mm Teža približno: 10 t Rsdpfxexy E Eve Agtjt Premer briketa: 105 mm Višina briketa glede na material cca: 60 - 120 mm Funkcijski podatki Ciklični čas: 10 sek. Kapaciteta na uro - Aluminij: 850 - 1.060 kg/h - Jeklo, litina: 1.800 – 2.000 kg/h - Nikel: 1.800 – 2.000 kg/h Masa briketa aluminij: 2,0 – 2,5 kg Gostota briketa jeklo, litina: 5,5 kg/dm³ Gostota briketa aluminij: 2,2 – 2,5 kg/dm³ Hidravlična oprema Število zmogljivostno reguliranih aksialnih batnih črpalk: 2 kos Potrebna moč na črpalni sklop: 30 kW Delovni tlak: 300 bar Volumen hidravličnega rezervoarja: 1.300 l Električna oprema Pogonska moč: 70 kW Krmilna napetost: 24 V DC Obratovalna napetost: 3 x 400 V / 50 Hz

Stanje: rabljeno, Leto izdelave: 2009, PRODECO BRIQUETTING PRESS MODEL L70 – CE COMPLIANT – USED - Briquette diameter: 70mm - Output: 50-120 kg/h - Serial no.: 89 - Year: 2009 - Complete with manual Rsdpewrddqefx Agtot

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, BRIKETIRANJE in PELETIRANJE – tehnologija: Tip stroja: BS70 oprema za briketiranje Stiskalnica za briketiranje tipa BS70 se lahko univerzalno uporablja za obdelavo naravno obnovljivih surovin pri proizvodnji novih, predelanih komercialnih izdelkov. Napravo se uporablja za obdelavo in stiskanje materialov, kot so slama, stročnice, seno, papir, les in drugi naravni materiali ter njihove mešanice. Proizvajalec zasnuje opremo glede na surovino, ki se bo predelovala. Vsebnost vlage obdelovanih surovin je največ 10–12 % in ne smejo vsebovati tujih snovi (kovin, kamenja, peska ipd.). Stiskanje poteka brez dodajanja dodatkov ali veziv, izključno s kompaktnim stiskanjem, kjer je (odvisno od vhodnega materiala) mogoče doseči gostoto nad 1 kg/dm³. Končni izdelek se samodejno polni v vreče za shranjevanje brez ročnega rokovanja, kar omogoča neprekinjeno obratovanje. To omogočajo 4 briketirne stiskalnice (premer briketa 70 mm) in 1 peletirni stroj (premer peleta 6 mm), ki jih je mogoče namestiti v hali dimenzij 15 x 20 x 6,3 metra. Oprema omogoča 16 ur dela na dan, pri čemer sta dva cikla po 7 ur neprekinjenega delovanja. Sistem sestavljajo naslednje enote: - KSD900 drobilnik za slamo (2 kosi) - AVSZ70 avtomatska priprava materiala (2 kosa) - Polžasti transporterji (3 kosi) - Koritasti polžasti transporter (2 kosa) - CSV70 cevna povezava (2 kosa) - PFK70 selektor prahu in filter prahu (1 kos) Redpfxsubb Ube Agtet - PF70 filter prahu (1 kos) - ST70 silos (6 m³) (2 kosa) - BS70 stiskalnica za brikete (4 kosi) Stiskalni bat tlači material v stožčasto cev, kar ustvari neprekinjeno palico s premerom 70 mm. Pritisk je nastavljiv, prav tako dovod materiala preko polžastega podajalnika. Zamenljivost stiskalnih orodij omogoča nadzor kakovosti in gostote izdelanih briket. Po želji ter glede na vrsto surovine dobavimo različne tipe stiskalnih orodij, ki jih pred dobavo preskusimo, če kupec dobavi vzorec surovine. Z menjavo orodja je stroj primeren tudi za proizvodnjo stelje, razsute krme ali izdelavo različnih mešanic po naročilu. Material se stiska brez veziv ali kemikalij. Glede na vhodno gostoto materiala se pridobijo različni produkti, katerih specifična teža lahko preseže 1 kg/dm³. Zmogljivost sistema za peletiranje in briketiranje je 1,5 t/h (podatki za pšenično slamo). Proizvodnja in kakovost izdelka sta odvisni od nastavljive hitrosti polža in pritiska stiskalnice, glede na kakovost surovine. Električna priključna moč: 37 + 10 kW. - Stiskalna cev (4 kosi) - Rebrasti transportni trak (1 kos) - HF70 regulator temperature hlajenja/ogrevanja (4 kosi) - AVP70 nadzorna enota (4 kosi) PELETIRANJE biomase – tehnologija: Končni izdelek: peleti premera 6 mm, dolžine 10–40 mm, Vhodna surovina: seno, slama. Vlažnost: največ 10 %. Tehnološki postopek vključuje: predmletje (sušenje), mletje, dozirno enoto, navlaževanje, stiskalnico za pelete, hladilni sistem, sito, filter in napravo za ročno polnjenje vreč. Tip stroja: MiniPell (1 kos) - zmogljivost stroja: 50–120 kg/h - elektro motor stiskalnice: 10 kW - dozirna enota: 0,37 kW - masa: 750 kg - Mlin (1 kos) - Zaslon nadzora in ročni polnilnik za vreče (1 kos)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2010, Performance 180–300 kg/h Briquette diameter 50 mm Filling volume of hopper 0.3 m³ Lubrication pump 1.0 kW Motor power 15 kW Demonstration machine with low operating hours - Automatic press for briquetting wood chips and other waste materials - Oil pressure lubrication for highly stressed moving parts - Hydraulic clamp cylinder at the pressing clamp to improve briquetting quality - Electric control system for all operating processes - The press head can be heated or cooled during the briquetting process - Requirements for input material: Moisture content between 8 and 14% Particle size between 1 and 12 mm Technical data: - Total connected load: approx. 22.0 kW - Pressure on the piston: 2,000–2,500 kg/cm² - Vertical compression screw: 1.5 kW - Lubricating oil capacity: 50 liters - Feed screw to compression screw: 0.75 kW - High-pressure pump: 0.55 kW Equipment: 1 Electric press head heating system 1 Fan cooling unit for press head 1 V-shaped metering hopper for briquette press Heavy-duty steel frame design Inspection window including bridge breaker (drive shared with feed screw) Electromechanical level sensor 1 Cooling rail for briquettes L=4.0 m Briquette guide rails made from round steel complete with supports Rsdpfxexy S E No Agtst

Stanje: rabljeno, Leto izdelave: 2017, obratovalne ure: 900 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2575, Model/ Tip: RUF 18,5/5000/80 Redpet Sfxmjfx Agtst Št. št./ Ma.No.: 2575 Leto izdelave: 2017 Pogonski motor: 18,5 kW Produktivnost do maks.: 550 kg/h (odvisno od materiala) Tlak stiskanja: ca. 5000 kg/cm² Briketni format: 80 mm Delovne ure: ca. 900 h Garancija: 12 mesecev po dostavi Razpoložljivost: ca. 8 tednov po prejemu avansa Podrobnosti: + Siemens TP 700, Siemens S7-1200 + Zalogovnik 600 x 1.000 mm + Električna emulzijska črpalka + Naprava za pršenje + Izvlečni polž + Črpalka z regulacijo hitrosti

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, obratovalne ure: 2.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1630, skupna masa: 7.800 kg, trajanje garancije: 6 meseci, moč: 85 kW (115,57 KM), Prodaja se kompletna proizvodna linija na osnovi briketirke Di Più BRIK MB100 (complete production line). Generalno obnovljen stroj DI PIU BRIK MB100 (tovarniško obnovljen leta 2025), pripravljen za takojšnje delovanje. Stroj je namenjen visokozmogljivemu briketiranju. Primeren je za zahtevno industrijsko uporabo. Stroj ima za seboj približno 2.000 delovnih ur. Stroj je na novo obnovljen v tovarni Di Piu, zamenjani vsi vitalni deli, vsi kabli, električna napeljava, ter potrebna električna oprema. S čimer je stroj dan v stanje novega in ima 6 mesečno tovarniško garancijo proizvajalca Di Piu. Stroj lahko proizvaja brikete z luknjo ali brez, debeline 90mm do 110mm iz mehkega in trde lesa, okrogle ali kvadratne. Ogled stroja je možen v tovarni v Italiji: Di Più Systems Srl, Via dell’Innovazione 11, 36042 Breganze (VI), Italija Mehanska briketirka Di Piu BRIK MB100 je avtomatski stroj za stiskanje lesa, žagovine in drugih odpadnih materialov v lesne brikete. Idealna vlažnost vhodnega materiala je med 8 % in 12 %, velikost delcev pa med 1 mm in 12 mm. Tehnični podatki: -Kapaciteta proizvodnje: 1.300 – 2.300 kg/h (pri gostoti žagovine 160–200 kg/m³) -Premer briketa: 90 – 110 mm -Moč glavnega motorja: 75 kW -Skupna instalirana moč: 98 kW -Tlak stiskanja bata: 2.000 – 2.500 kg/cm² -Vertikalni polž z reduktorjem: 5,5 kW -Oljna črpalka: 1,5 kW -Oljna črpalka za zapiranje iztiskalne glave: 1,5 kW -Dozator s polžem in nastavljivo hitrostjo: 1,5 kW -Oljni sistem za mazanje bronastih ležajev: 100 litrov -Senzor za nadzor izhoda briketov (samodejni izklop ob izpraznitvi materiala) -Zaščitne obloge gibljivih delov -Senzor tlaka olja -Krmilna omarica -Zalogovnik za vhodni material (akumulator) -Senzor nivoja za nadzor napajalnega sistema -Teža stroja: cca 7.800 kg Stroj je opremljen z vsemi pripadajočimi dodatki za popolno delovanje in integracijo v linijo za briketiranje: DODATNA OPREMA – MB100: - Dozirni silo: Izdelan iz masivne jeklene konstrukcije. Premer: 1500 mm, višina: 1000 mm. Vgrajen ima rotacijski rezalnik z reduktorjem 2,2 kW, nameščen na robustno jekleno ogrodje. Dovajanje materiala nadzira senzor nivoja. - Linija za hlajenje briketov po iztiskanju, skupne dolžine 20 metrov - Avtomatska žaga za razrez briketov - Žaga samodejno reže brikete na dolžine, ki jih predhodno nastavi operater. - Naprava za proizvodnjo briketov z luknjo - Sistem za hlajenje glave stroja z ledeno vodo - Sistem proizvaja 50 litrov/minuto ledene vode za učinkovito hlajenje glave briketirke. - Zračno hlajen hladilnik vode z hermetičnimi spiralnimi kompresorji, mikroprocesorskim krmiljenjem in velikim rezervoarjem za shranjevanje energije, v katerem je potopljen izmenjevalnik toplote voda–hladilno sredstvo. - Izmenjevalnik toplote je visokoučinkovit tipa “fin-pack”, izdelan iz bakrenih cevi in aluminijastih lamel. - Rezervoar za vodo prostornine 800 litrov - Črpalka za dovod vode (50 l/min – 20 m.c.a. – 0,55 kW) s trikrožnimi ventiloma DN25 za uravnavanje temperature hladilne vode v glavi briketirke. - Digitalni elektronski regulator temperature povezan s senzorjem NTC (merilni element d.6 × 52 mm, IP68, AISI 316). DODATNO: NOVAPAC pakirka Možnost dodatnega nakupa pakirke NOVAPAC, ki je popolnoma kompatibilna s strojem Di Più BRIK MB100 in drugimi stroji, idealna rešitev za avtomatsko pakiranje neposredno po stiskanju. Letnik: 2013 Cena za Novapac: 19.000 € Redpfx Agewrp Emstot Oprema vidna na zadnjih 6 slikah

Stanje: novo, Leto izdelave: 2025, THE WOOD PRESS FOR PREMIUM FUELS The RUF LIGNUM Classic wood briquette press is perfectly suited for briquetting medium quantities of wood shavings generated in the woodworking industry. By briquetting, you can achieve additional revenue while reducing storage and transport costs. Another advantage of our wood briquette presses is their flexibility: they can compress various material sizes into high-quality briquettes without the use of any binding agents. As a result, RUF briquettes offer enhanced utility value and optimal CO2 balance, making them a valuable energy source. Our LIGNUM series also stands out thanks to RUF’s innovative hydraulic system, featuring high energy efficiency and low wear. YOUR ADVANTAGES AT A GLANCE - Fully automated 24-hour operation possible - Durability - Low maintenance costs - Compact design - Can be directly integrated into existing production lines - Over 35 years of experience ADVANTAGES OF RUF BRIQUETTES - Additional revenue from briquettes - Produced without binding agents - CO2-neutral fuel - Higher calorific value compared to firewood - Space-saving storage thanks to rectangular shape Technical Data RUF LIGNUM CLASSIC Max. output for wood (kg/h): 410 Motor power (kW): 30 Max. specific pressing pressure (kg/cm²): 1700 Briquette format (mm): 150x60 Dimensions (m) L x W x H: 2.1 x 1.9 x 2.0 Rsdpjq Rut Tsfx Agtjt Approx. weight (t): 3.3t Availability/Delivery time upon request

Stanje: novo, Leto izdelave: 2025, WOOD CHIP BRIQUETTING FOR INCREASED RETURNS With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips—regardless of wood type—into premium-quality briquettes, all without the use of binders. The briquetting process generates higher revenues while simultaneously reducing transport and storage costs. Our robust LIGNUM series wood briquetting presses are distinguished by their long service life, low wear, and can easily be integrated into existing production facilities. The innovative RUF hydraulic system also ensures high energy efficiency. Rjdpeq Ruvvefx Agtjt YOUR BENEFITS AT A GLANCE - Fully automated 24/7 operation possible - Long service life & low wear - Low maintenance costs - Compact design - High energy efficiency - Over 35 years of experience ADVANTAGES OF RUF BRIQUETTES - Higher returns from briquettes - No binders required - CO2-neutral fuel - Higher calorific value compared to firewood - Space-saving storage due to rectangular shape Technical Data RUF LIGNUM R4 Max. throughput (wood, kg/h): 590 Motor power (kW): 30 Max. specific pressing pressure (kg/cm²): 1700 Briquette size (mm): 150 x 60 Dimensions (m) L x W x H: 2.9 x 2.1 x 2.1 Approx. weight (t): 4.1 Availability/Delivery time upon request

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, WEIMA TH 400 Briquetting Press – After technical inspection – Made in Germany – Very good condition – Year of manufacture: 1992 TECHNICAL DATA: Main motor power: 7.5 kW Machine output: approx. 80 kg/h Briquette diameter: 50 mm Feeding hopper dimensions: 2000 x 1800 mm Screw conveyor for material feed to the press piston Agitator Machine dimensions (L/W/H): 240 / 190 / 200 cm Rjdpfjt U Et Njx Agtot Weight: ~850 kg WEIMA TH series hydraulic briquetting presses are compact machines for briquette production. The presses can be loaded manually or automatically directly into the hopper. Thanks to their small footprint and quiet operation, these machines are ideal for installation in production halls. Features: – Reduction of production waste volume – Low purchase costs – Low energy consumption – Compact design requires little space – Excellent processing quality – Durable construction and long service life – Trouble-free maintenance and low wear – Easy operation Main applications for briquetting presses include for example: – In combination with dust extraction or filtration and dedusting systems – For manual material feeding – Integrated with a shredder (e.g., WEIMA WL4) – Via screw conveyor or belt conveyor – With a mobile extraction unit or combustion furnace

Stanje: novo, Leto izdelave: 2025, Kompaktna hidravlična briketirka. Glavni motor ima moč 4 kW, premer briketa je 50 mm. Kapaciteta stiskalnice znaša 30–50 kg/uro. Stroj je nov in ima certifikat CE. Po želji je možna dobava z oljnim hladilnikom. Za več informacij obiščite naš YouTube kanal, spletno stran ali Facebook profil. Redpofk N Tpofx Agtot

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Rodpfx Aev Rpxlogtjt Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: dober (rabljeno), Leto izdelave: 1999, Briketirni stroj tip GP 120 Tandem Briketirni stroj za briketiranje ostružkov, sekancev in prahu vklj. z avtomatskim senzorjem za zaznavanje nivoja polnjenja - Premer briketa: 60 mm - Tlačna zmogljivost: 40–120 kg/h * 2 = 80–240 kg/h (odvisno od materiala) - Odpiranje lijaka: pribl. 1.900 x 1.900 mm - Višina lijaka: pribl. 1.800 mm - Prostornina lijaka: pribl. 6,0 m³ - Pogonska moč: 7,5 kW, 400 V, 50 Hz - Krmilna omara: prisotna na obeh straneh - Obratovalne ure: 13.725 h oz. 13.005 h - Hidravlična enota: pribl. 300 l rezervoar za hidravlično olje - Teža: pribl. 1.100 kg * 2 = 2.200 kg Rodpfxjupwx Ho Agtjt Rabljeni briketirni stroj v dobrem stanju Valj W-zvijače, klešče (RB 120 ojačane), priključna prirobnica klešč na eni strani obnovljena (levo v smeri transporta) briketiranje | stroj za briketiranje | briketirni stroj | briketirni stroji | briketiranje

Stanje: dober (rabljeno), Leto izdelave: 2013, obratovalne ure: 37.400 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2110, skupna širina: 2.000 mm, skupna višina: 2.100 mm, skupna dolžina: 3.000 mm, skupna masa: 5.500 kg, Hydraulic system: - Power-regulated axial piston twin pump  Max. operating pressure: 300 bar  Drive motor: 55 kW, 400 V, 50 Hz, 3-phase AC, 1,500 rpm  Motor designed as an energy-saving motor, efficiency class EFF1  Protection class: IP 54 - Valve voltage: 24 V DC - Hydraulic tank (950 l) with separate cooling and fine-filter circuit, 5µm filter unit, 2.2 kW drive - Large double return filter integrated in the tank, 10µm filter unit - Hydraulic tank integrated into the support frame Electrical configuration: - Machine control cabinet per DIN EN60204-VDE 0113, protection class IP 54 - Input voltage: 400 V 50 Hz - Lockable main switch on the housing - Emergency stop button located in the control cabinet - Control voltage: 24 V DC - Freely programmable control (PLC) SIEMENS S7-200 - With operation and display panel Siemens TP 177B  Display and modify operating statuses and values  Execute operations  Display error messages - Automatic start/stop via light barrier integrated in the feed hopper - All initiators operate contactlessly - Gear motors and pump motors feature thermal winding protection Material feed: - Feed hopper with a filling area of 800 x 400 mm - Robust sheet steel construction with reinforcements - Hopper volume approx. 150 liters - Agitator to prevent bridging, driven by a 0.55 kW motor - Feed screw driven by a 1.5 kW motor - Feeding time automatically controlled by the PLC Precompactor: Vertically arranged, hydraulically operated. - Precompaction pressure adjustable via TP 177B - Control system dust-tight, using the distance measurement system developed and patented by RUF Main compactor: Horizontally arranged, hydraulically operated. - Pressing pressure adjustable via TP 177B up to 300 bar - Hydraulic cylinder 350, with pressing pressure up to 300 tons Press capacity: - Depending on settings and material, up to 600 units per hour (approx. 800 - 1000 kg/h) Briquette dimensions: - 240 x 70 mm Rjdpfxsxwizie Agtst - Briquette length 70 - 110 mm; depending on settings as well as the type and bulk density of the material to be briquetted - Max. specific pressing pressure approx. 1,776 kg/cm²

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.800 mm, skupna višina: 2.000 mm, skupna dolžina: 1.600 mm, skupna masa: 3.000 kg, Toto je zcela nový stroj, který je ihned k dispozici. Rodpfx Aoukfvpjgtot

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Popolna linija za briketiranje 2 x RUF 330. Kotlovnica, bobnasti sušilnik, transporterji. Rjdpfx Aoxazhtsgtot

Stanje: dober (rabljeno), Good, used condition Main motor: 11 kW Throughput up to max. 200 kg/h Rsdpet Hxudofx Agtet Year of manufacture: 12/2008 / Technically inspected in 01/2025 Briquette size: 150x60 mm *Used machine, sold as seen Functionality guaranteed upon handover

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new only 704 operating hours Special price for lightly used demonstration machine Base machine: €29,990 net Options at extra cost: - Cooling unit: €3,995 net - Emulsion tank: €3,990 net The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. Throughput capacity: up to max. 70 kg/h (material-dependent), Briquette diameter: Ø 50 mm, Motor: 5.5 kW, 400 Volt / 50 Hz / 3 phase, Pump: 40 litres Redpod N Dnhsfx Agtet Max. briquette length: 50 mm, Optimal briquette length: 40 mm, Silo diameter: 1,000 mm, Oil tank: 110 litres Dimensions: 1750 x 1130 x 1100 mm (L x W x H) Weight: 950 kg Hydraulic pre-compaction via slide Main press cylinder Vertical cylinder Fill level sensor: yes Requirements for the input material - Max. chip length: 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Max. weight on agitator: 150 kg - The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result