Bollegraaf nakup rabljenega (12)

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, obratovalne ure: 32.169 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 60 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.320 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, skupna masa: 22.000 kg, kapaciteta rezervoarja za olje: 900 l, For sale is a complete baling press system consisting of conveying technology, baler (partially overhauled and tested), and wire stations. Technical data (baler): Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main press force: 60 t Pre-press force max.: 25 t Feed chute dimensions: 1,320 x 1,100 mm Theoretical cycle time: 18 seconds Bjdpsviwdmofx Afnowi Bale size: 1,100 x 720 mm, variable length Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates at a bulk density of 30 kg/m³: approx. 5.5 t/h 50 kg/m³: approx. 10 t/h 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg, depending on material PLC: Telemecanique TSX Micro Baler weight: approx. 22 t Scope of supply: 1 chain belt conveyor 1 Bollegraaf HBC 60A baler with fluffing unit (wirbulator) 1 maintenance platform with access ladder 2 wire stations with guide pulleys for 10 wire reel stands (without wire) The following repair and overhaul work has been carried out: - Hydraulic oil tank drained, cleaned, and refilled with new oil - Oil filter and air filter replaced - Hydraulic block partially resealed - Hydraulic hose at the hydraulic block replaced - Wire run-in marks at the base passages welded and smoothed - Tying unit cleaned and serviced - Electrical system repaired, door interlock switches partially replaced - Fluffing unit repaired - General maintenance carried out, machine lubricated - Machine tested under power, without material, in manual and automatic mode—see function video Remarks: The system has already been completely dismantled, stored, and is ready for prompt loading. Documentation (operating manual, CE, electrical/hydraulic circuit diagrams) is available. Viewing by appointment is possible. We accept no liability for the technical specifications or any errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, obratovalne ure: 34.480 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 750 kg, skupna masa: 19.000 kg, transportna višina: 3.300 mm, kapaciteta rezervoarja za olje: 750 l, moč: 45 kW (61,18 KM), Technical Data – Baler: Manufacturer: Bollegraaf Model: HBK 100 Year of manufacture: 2004 Operating hours: 34,480 hours Main ram pressing force: 100 t Pre-pressing force max.: 42 t Feed hopper dimensions: 1,600 x 1,100 mm Filling volume: 3.15 m³ Theoretical cycle time: 22 seconds Theoretical throughput: up to 450 m³/hour Bale dimensions: 1,100 x 720 mm; length variable Drive power: 45 kW Total connected load: 60 kW Tying system: 5-fold vertical Throughput rates at bulk density: - 30 kg/m³: approx. 13 t/hour - 50 kg/m³: approx. 20 t/hour - 100 kg/m³: approx. 30 t/hour Throughput with air separator operation: approx. 20 t/hour Bale weight: 550 to 750 kg, depending on material Hydraulic oil tank volume: 750 L Bwodpjxbgnhofx Afnji PLC control: Telemecanique TSX Micro Transport dimensions (excluding press): 10,900 x 2,320 x 3,300 mm (L x W x H) Machine weight (press): approx. 19 t Remarks: Unlike the standard HBC press series from Bollegraaf, this machine does not have a pre-press flap but instead cuts the material between knives mounted on the pressing ram and a counter-knife in the frame. It is, therefore, a cutting-edge baler, comparable to models from Paal, unoTech, etc. The baler is in very good condition for its age, as it was used exclusively for baling paper from document destruction operations. The documentation (operating manual, CE certificate, electrical/hydraulic schematics) is complete. Inspection by appointment possible. We do not accept liability for the technical data provided or for possible errors.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Portalni žerjav Bollegraaf 30 ton, 32 metra, 10 metrov dvižne višine Bwodpfx Ajw S Ea Sjfnoi

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 97020-0010, stiskalna sila: 80 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 720 mm, moč: 45 kW (61,18 KM), obratovalni tlak: 250 letvica, Oprema: dokumentacija / priročnik, Ta balirni stroj prodaja podjetje Bollegraaf Recycling Solutions. Gre za balirni stroj HBC80 (45 kW) z med drugim križnimi žicami in verižnim dovodnim trakom. Leto izdelave balirnega stroja: 1997 Leto izdelave verižnega traku: 2015 Bjdoxvh Dyopfx Afnowi Balirni stroj Bollegraaf HBC80 45 kW Dimenzije bal: 1100*720 Glavni motor 45 kW Vmesni lijak Dovodna cev za trak Krmilna omara Schneider PLC Verižni dovodni trak Leto izdelave: 2015 Horizontalni del: 6000 mm Nagnjeni del: 12500 mm (30 stopinj) Labodji vrat Balirni stroj je mogoče pregledati v delovanju do konca marca.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 6.000 h, številka stroja/vozila: 006424, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 720 mm, trajanje garancije: 3 meseci, moč: 75 kW (101,97 KM), Oprema: dokumentacija / priročnik, This very young baler is being sold by Bollegraaf Recycling Solutions. It concerns a HBC100 baler (75kW) equipped with, among others, cross-tying and FULL HARDOX wear plating, as well as a Bollegraaf chain conveyor with Bordoflex. Both the chain conveyor and the baler are fitted with all possible options to efficiently bale all types of plastics to the maximum extent. All equipment was built in 2022 and has very few operating hours. The previous owner traded these machines in after purchasing a new Bollegraaf installation. After dismantling, this baler is offered including a 3-month warranty. Baler HBC100K (75kW): Bodjxvh Ewopfx Afnswi - Pressing blocks with 390mm height - Intermediate hopper - Conveyor inlet chute - Maintenance platform with cage ladder - Extra photocells - Frequency converter for the main motor for energy savings - APCP (adaptive self-learning channel pressure control for always optimal bale weights) - Cross-tying (3 horizontal wires and 5 vertical wires) - Full Hardox wear plating inside the baling chamber - Bale discharge - Hydraulic lifting mechanism for both knotter assemblies for improved accessibility/maintenance - Bale length display - Air conditioning on the control panel - Frequency converter for chain conveyor - Hydraulic oil heater - Cooler for hydraulic unit - 4G modem for remote support Bollegraaf Chain Conveyor HBT 1200/1800*20400: - Equipped with Bordoflex for additional chain protection - Discharge plate for debris - Support structures - Chain lubrication system

Leto izdelave: 2022, obratovalne ure: 3.863 h, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 006682, On behalf of our client, we are offering an almost new OI sorting installation. This system can be tested in operation at the client's site. The machines consist of: OI Sorting: 0050 - Bunker conveyor with dosing drum BDF1200/2000*10000 0060 - Incline conveyor to screen HBT1200/1600*14000 0070 - Cardboard screen 1640*7000 Platform Caged ladder 0080 - Modifications to existing paper chain conveyor 0090 - Control cabinet included Operating hours: only 3863 A warranty may be possible by arrangement with the client and Bollegraaf, subject to conditions. Bjdpfjwq D Dnox Afnewi Please refer to the attached PDF for a detailed technical specification for each machine.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, vhodni tok: 238 A, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced Bwodjvf E Avspfx Afnei - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: W230-028, stiskalna sila: 80 t, trajanje garancije: 24 meseci, pritisk: 250 letvica, moč: 45 kW (61,18 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, This fully refurbished baler is being sold by Bollegraaf Recycling Solutions. Bsdjtvat Tspfx Afnowi It concerns a HBC80 baler (45kW) equipped with vertical tying. This baler has already been completely refurbished in our overhaul workshop. The refurbishment was carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold including a 2-year warranty. The press is supplied with the following options: * support stands, * intermediate hopper, * bale exit chute, * wire spool platforms

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HBC 140 2x75kW 2001 (210-008-01), stiskalna sila: 155 t, teža bale: 1.500 kg, pritisk: 250 letvica, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststof ventiel Anti-ratten bekabeling Draaiuren: 0 na volledige revisie Bodetvau Ajpfx Afnswi Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards', inclusief 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de feitelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en opnieuw gelast waar nodig. Dit geldt ten minste voor de volgende onderdelen: • Persplunjer, • Frame, • Perskanaal, • Voorpersklep Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voorpersklep worden deukvrij gemaakt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en alle benodigde reparatie- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en -slangen worden vervangen. De hydraulische componenten worden opnieuw verpakt. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke plekken. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen door nieuwe. Cilinders: De cilinders worden opnieuw verpakt en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast De schakelkast wordt gecontroleerd en schoongemaakt. Indien nodig worden elektronische componenten vervangen door nieuwe. De PLC en HMI (mens-machine-interface) worden vervangen door de nieuwste Schneider M340-versie, inclusief de meest recente software.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 24.967 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 004283-0030, stiskalna sila: 122 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, trajanje garancije: 24 meseci, leto zadnje generalne obnove: 2026, Oprema: dokumentacija / priročnik, This fully refurbished baler is offered for sale by Bollegraaf Recycling Solutions. The unit concerns a Bollegraaf HBC120s baler (90kW), equipped with cross tying (5 vertical and 5 horizontal wires). At the time of writing, this baler is undergoing a complete overhaul at our refurbishment workshop. This refurbishment is carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, the baler is sold including a 2-year warranty. Technical specifications, type HBC120S: Volume capacity m³/h max. – 815 660 500 Bulk density kg/m³ max. – 20 50 100 Weight capacity t/h max. – 16.3 33 50 The aforementioned capacities apply only if the machine is used properly and is fed continuously with suitable material for at least one uninterrupted hour. Bedpfx Aoxcir Eofnowi Bale weight – approx. 1,470 kg, depending on material type and bale length Bale length – variable / adjustable Bale height – 1,100 mm Bale width – 1,100 mm Hopper dimensions – 1,100 mm x 1,600 mm – These dimensions also determine the maximum size of material that can be loaded into the machine. Press force – max. 119.7 tons Pre-press flap force – max. 65 tons Cycle time, excluding wire tying – 19 seconds Main motor output – 90 kW (120 HP) Twistomat (knotter) motor – 1.5 kW (SEW) Counter pressure pump motor – 1.1 kW (2 HP) Needle installation motor – 7.5 kW (SEW) Oil cooler fan – 3 kW (4 HP) Oil cooling pump – 4 kW (5.5 HP) Operating pressure – 315 bar Machine weight – approx. 40,040 kg Number of wires – 5 vertical; 5 horizontal Oil volume – 1,655 liters Oil type – BP-SHF-46 Colour – baler in RAL 6024 (green); safety doors in RAL 1021 (cadmium yellow) Baler dimensions – length 11,765 mm; width 2,500 mm; height 7,104 mm.

Stanje: dober (rabljeno), Leto izdelave: 1996, Balinirni stroj vključno z transportnim trakom, žičnimi koši, razdelilcem Znamka: Bollegraaf Tip: HBC 50A Letnik izdelave: 1996 Bwsdpextmyzofx Afnei Lastna teža: 19.000 kg Teža transportnega traku: 6.000 kg Moč motorja: 30 kW Navpično povezovanje Število žic: 5

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 25 t, širina odprtine za polnjenje: 800 mm, dolžina polnilne odprtine: 1.050 mm, širina bale: 900 mm, višina bale: 800 mm, vhodna napetost: 400 V, raven hrupa: 85 dB, moč: 18,5 kW (25,15 KM), volumenski pretok: 160 m³/h, Bollegraaf HBK25 na voljo na Cipru. Stroj je v dobrem stanju in vključuje talni transportni trak. Stroj je na voljo takoj. Tehnični podatki balažnega stiskalnika: Pogon: 18,5 kW Dimenzije bale: 800 x 900 x nastavljivo Dimenzija polnilnega lijaka: 1.050 x 800 Tlačna sila: 25 ton Kapaciteta: 160 m3/uro (odvisno od materiala) Bedpfx Afexbdgusnjwi Tehnični podatki transportnega traku (ocena): Dolžina na tleh: 3.000 mm Diagonalna dolžina: 5.000 mm