Herbold nakup rabljenega (86)

Stanje: rabljeno, številka stroja/vozila: 13293, Rotor diameter: 450 mm Rotor width: 1000 mm Rotor knives: 9 rows Stator knives: 2 Tjdpfewmg Smjx Abgjf Drive motor: 75 kW

Stanje: rabljeno, Proizvajalec: AWILA Tip: poševni polžasti transporter Premer: 200 mm Dolžina: 4000 mm Pogon: 2,20 kW Ohišje polža: vroče pocinkano Tjdpfx Aboxxk Akegef Polžasti navoj: običajno jeklo Ohišje z območjem za odvodnjavanje Uporabljeno samo za preskuse

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Heavy-duty granulators Todpfjufi Rxex Abgsf Manufacturer: Herbold AMIS Model: SM 60/100 7-2 Feed opening: 700 x 1000 mm Open rotor: 600 mm diameter x 980 mm width Rotor knives: 7 Stator knives: 2 plus additional knife set: 2 Knife setting table

Stanje: rabljeno, številka stroja/vozila: 13213, Rotor diameter: 600 mm Rotor width: 1000 mm Number of rotor knife rows: 7 Number of stator knife rows: 2 Infeed cross-section approx. 720 x 980 mm Tjdswbwxmepfx Abgof Drive motor: 90 kW

Stanje: rabljeno, Proizvajalec: AWILA Tip: poševni polžasti transporter Premer: 200 mm Dolžina: 4000 mm Pogon: 2,20 kW Tedpfexxky Aox Abgjf Ohišje polža: vroče pocinkano Polžasti navoj: običajno jeklo Ohišje z območjem za odvodnjavanje Uporabljeno samo za preskuse

Stanje: rabljeno, Rotor width = 3000 mm Rotor diameter = 500 mm Drive power = 18.5 kW Tedpoww N Ekofx Abgsf

Stanje: rabljeno, Pressure blower with rotary valve, fan for material conveying Type: TZK 150 Condition: 2 units available – 1 x unused, 1 x used for trials Application: Suitable for free-flowing ground material, such as PET flakes, rigid plastic regrind, grain, etc. Machine data: Blower drive power: 11 kW Rotary valve drive power: approx. 0.75 kW Approximate conveying capacity in t/h for dry materials such as rigid plastic or wheat at 6 m conveying height and three 90° bends (non-binding, according to manufacturer): At 15 m conveying length: approx. 21.00 t/h At 50 m conveying length: approx. 13.90 t/h Todpfxjxxkvke Abgef At 100 m conveying length: approx. 9.40 t/h Without electrical control cabinet. The cast design rotary valve is mounted directly and vertically above the conveying pipeline. For gentle material handling, additional rubber edges are fitted on the rotary valve rotor. A large feed hopper with low inlet height enables easy filling from two sides. Frequent applications include silo truck or flat storage filling, loading onto trucks, or mobile handling of grain.

Stanje: rabljeno, Pressure blower with rotary airlock valve, fan for material conveying, Type: TZK 150 Condition: 2 units available – 1 unused, 1 used for testing purposes Application: Suitable for free-flowing bulk material, e.g. PET flakes, rigid plastic regrind, grain, etc. Machine specifications: Blower drive power: 11 kW Rotary valve drive power: approx. 0.75 kW Approximate conveying capacity in t/h for dry materials such as rigid plastic or wheat, at 6 m conveying height and three 90° conveying bends (non-binding, as specified by the manufacturer): At 15 m conveying distance approx. 21.00 t/h, at 50 m approx. 13.90 t/h, and at 100 m approx. 9.40 t/h. Without electrical control cabinet. Tedpfx Ajxxkuyobgef The cast-iron rotary airlock is mounted directly and vertically above the conveying pipeline. To protect the conveyed material, the rotary valve is equipped with additional rubber edges on the rotor. A large feed hopper with a low filling height allows for easy loading from two sides. Frequent areas of application include silo truck or flat storage loading, truck loading, or mobile transfer of grain.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Pogonska moč: 55-90 kW, odvisno od zahtevane zmogljivosti in naloge Uporaba: Sušenje in čiščenje trdih plastik, PET kosmičev, folije Todpfx Ajxlrprebgef Zmogljivost: 800-2500 kg/h, odvisno od vhodnega materiala

Stanje: rabljeno, Počasni predmlevec za gumo, plastiko, kable, kompozitne materiale. Zelo primeren za ločevanje materialnih spojin, npr. pnevmatik, odpadnih kablov. Z integrirano varnostno strižno sklopko za zaščito pred tujki. Tjdpfx Abexgrnqogof Rotor premera 600 mm x 1450 mm delovne širine. Zaprt rotor s zamaknjenimi segmentnimi noži, nameščenimi na kasetah. 24 rotorskih nožev, 2 vrstici statorskih nožev. Zasukan sito koš, perforacija po izbiri. S pritiskalno napravo (nihajna roka). Pogonska moč 90–200 kW.

Stanje: generalkompletno obnovljen (rabljeno), HERBOLD sušilnik/čistilec/suhi čistilec tip T2015 Todpfx Aboxgr Rfogof Pogonska moč: 45-132 kW glede na zahtevano zmogljivost in nalogo Uporaba: Sušenje in čiščenje trdih plastik, PET kosmičev (maks. 4 t/h pretočnosti) in folij (1,2-1,6 t/h) Rotor: premer 1200 mm x dolžina 2300 mm Standardna perforacija sita: 2,5 mm okrogle odprtine S klinastim jermenskim pogonom

Stanje: rabljeno, HERBOLD PU800 fine grinding mills Suitable for soft to medium-hard materials Tsdpfx Aboxgtf Rogef Previously used for fine grinding plastics Grinding disc diameter: 800 mm Drive motor: 90 kW

Stanje: rabljeno, Suitable for pre-shredded plastic waste (rigid plastics, films), throughput depending on material type approx. 0.5–2 t/h, drive power 30 kW. Tedpfxexgq I No Abgsf

Stanje: rabljeno, Refurbished heavy-duty granulator, wear-protected Tsdpfx Absxgrdfsgjf Suitable for dry and wet size reduction Typical applications: plastic hollow bodies, secondary shredding of pre-shredded waste Rotor: 800 mm diameter x 1600 mm width Open F7 rotor with replaceable knife supports Drive power: 160-250 kW With forced feeding via 3 load-dependent controlled feed screws Hydraulically opening design, hydraulically tiltable screen basket Throughput capacity: up to 5 t/h, depending on material and particle size

Stanje: rabljeno, Leto izdelave: 2023, HERBOLD zigzag separator (gravity separator) Type SZS 630/175 Tedpfx Ajxgrzwebgof Separation channel width: 630 mm With 7.5 kW blower Material: standard steel Condition: unused Year of manufacture: 2023

Stanje: rabljeno, Suitable for pre-shredded plastic waste (rigid plastics, films), Tedpfx Absxgr Hgsgjf Throughput depending on material type approx. 0.5–2 t/h Drive power 30 kW A total of four dryers of this model are available.

Stanje: rabljeno, The Herbold fine mill PU 500 is suitable for fine grinding plastics and soft to medium-hard materials. Drive power: 55 kW Todpfx Aexgtgzsbgef Grinding disc diameter: 500 mm Throughput: approx. 200–800 kg/h depending on material and fineness

Stanje: rabljeno, Počasni predmlevec za gumo, plastiko, kable, kompozitne materiale. Zelo primeren za ločevanje materialnih spojin, npr. pnevmatik, odpadnih kablov. Z integrirano varnostno strižno sklopko za zaščito pred tujki. Rotor premera 600 mm x 1450 mm delovne širine. Zaprt rotor s zamaknjenimi segmentnimi noži, nameščenimi na kasetah. 24 rotorskih nožev, 2 vrstici statorskih nožev. Zasukan sito koš, perforacija po izbiri. Tedpfx Asxgtkmobgsf S pritiskalno napravo (nihajna roka). Pogonska moč 90–200 kW.

Stanje: rabljeno, HERBOLD single-shaft shredder EWS 45/200 Todpexgtp Aefx Abgsf With feed device (pendulum arm) Working width: 2000 mm Rotor diameter: 450 mm Drive: 2 x 90 kW Machine in very good condition, ready for operation

Stanje: generalkompletno obnovljen (rabljeno), HERBOLD sušilnik/čistilec/suhi čistilec tip T2015 Pogonska moč: 45-132 kW glede na zahtevano zmogljivost in nalogo Uporaba: Sušenje in čiščenje trdih plastik, PET kosmičev (maks. 4 t/h pretočnosti) in folij (1,2-1,6 t/h) Rotor: premer 1200 mm x dolžina 2300 mm Standardna perforacija sita: 2,5 mm okrogle odprtine S klinastim jermenskim pogonom Tsdpfoxgtrqex Abgsf

Stanje: rabljeno, Infeed: approx. 600 x 580 mm Rotor width: approx. 600 mm Todpfx Ajxgtr Dsbgjf Rotor diameter: approx. 450 mm Stator knives: 2 Rotor knives: 4

Stanje: rabljeno, The HERBOLD Plastcompactor is a system designed for the agglomeration of films, fibers, shavings, dust, and flakes. It transforms poorly free-flowing waste into agglomerate with high bulk density and good flow properties, making it suitable for direct feeding into extruders and injection molding machines. The unit for sale is equipped with a main drive motor rated at 110 kW and offers a throughput capacity of 600 to 2,000 kg/h, depending on the input material. All thermoplastic plastics can be processed, including delicate materials such as PET, PA, and bioplastics, which can be agglomerated without thermal damage or discoloration. Tjdpsxgtx Djfx Abgsf The system comprises the feed device with silo, the compactor, a secondary cutting mill with screening, and fine material recirculation. Upon request, a pre-shredding solution tailored to your specific requirements can be offered. Trials for suitability and sampling can be conducted in our technical center. We are the manufacturer of this equipment and can ensure reliable service and spare parts supply. The system is available for immediate delivery!

Stanje: rabljeno, HERBOLD single-shaft shredder EWS 45/200 With feed device (pendulum arm) Tsdpfxjxgq S Ue Abgsf Working width: 2000 mm Rotor diameter: 450 mm Drive: 2 x 90 kW Machine in very good condition, ready for operation

Stanje: rabljeno, kW: 30 Tjdsxgr Rlopfx Abgof Rotor diameter: 500 mm Rotor width: 1200 mm

Stanje: rabljeno, The plant is suitable for the agglomeration of thermoplastic films and fibers. Depending on the material, the throughput ranges between 500 kg and 1,000 kg/h. The plant consists of: • Feed conveyor belt • Load-dependent control system for the feed belt • Metal detector coil • HERBOLD cutting mill, type SMS 45/100-H5-3 • Pneumatic material transport to the buffer silo • Plastcompactor unit HV-70, which comprises buffer silo feed screw, plastcompactor, central blower, and cooling circuit Tjdjxgtqmopfx Abgsf • HERBOLD secondary cutting mill, type SML 45/100-S4-2 • Intensive cooling system • SZS II 630/200 conveying blower • Screening machine • Fines recirculation to the compactor silo • Material conveyor type MFT with Big Bag station and automatic diverter valve to on-site silo • Automatic exhaust air filter • Electrical control system • Compressor.