Portalna dvigala

Bollegraaf 30 ton

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, skupna širina: 3.500 mm, največja dolžina izdelka: 5.000 mm, število osi: 6, This 6-axis FRONIUS UR10 robot from the e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional features include a 4000 mm linear axis, a rotary/tilting axis with a load capacity of 250 kg, and a torch holder. Ideal for advanced welding applications. Contact us for further information about this machine. Additional equipment • Robot controller and teach pendant • Bumper (remote protection) and protective film for teach pendant • Multifunction flange for magnetic attachment to the torch neck • Balancer system for hose management • weldControl URCap software • TOUCHSENSE CAP – part location detection with welding wire or gas nozzle • CAP component OFFSET – for shifting and copying programs • Operating controls: Quick start buttons (Start / Stop / Reset / Emergency Stop, speed potentiometer, selector switch for 2-station operation) • slideONE: 4000 mm linear axis for Universal Robots with an effective robot stroke of 1600 mm • RotateTWO 250: external rotary/tilting axis for the robot with a load capacity of 250 kg, including standard product with octagonal plate (16 mm pitch-hole pattern) and table SW 600x50 • Safety technology: 1 set of laser light barriers with steel post and 1000 mm light curtain (Safety PLC for 2-station operation) Fedpfx Abex D E Huetogc Machine benefits Technical advantages • Maximum reach: 1300 mm • Welding technology: holdONE = torch holder with integrated Freedrive button, Fronius CMT torch • Ergonomic holder for the teach pendant • Supports all welding positions and ensures accessibility • Floor stand for freestanding axis on two columns, incl. leveling plates for mounting • The tools and 3 cabinets shown in the pictures are included in the scope of delivery. Additional information Machine still under power

Stanje: zelo dobro (rabljeno), moč: 191 kW (259,69 KM), vrsta goriva: dizel, barva: bela, dvižna višina: 56.080 mm, prva registracija: 06/2014, tip droga: teleskopski, Leto izdelave: 2014, Drive: Wheel Number of cylinders: 6 Mast: Telescopic (4 sections) Mast length: 56.08 m Lifting capacity: 110,000 kg Superstructure brand: TEREX TR110 QUADSTAR 1100 + JIB Technical condition: very good Visual condition: very good Fgsdpfx Abswudg Detec

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta upravljanja: ročni, stopnja avtomatizacije: ročni, vrsta aktuacije: ročni, Kot upogiba (maks.): 130 °, skupna masa: 430 kg, trajanje garancije: 24 meseci, Sheet metal bending machine – Press brake 3100 mm – RG-C 3007 + Roll shear RC-0.8 3-Meter Sheet Metal Bending Machine – Professional Solution for Roofers Our 3-meter sheet metal bending machine is a high-quality solution for roofers and companies specialized in sheet metal processing who value precision, durability, and ergonomic operation. Its robust design and precise workmanship ensure reliability and user-friendliness even under demanding conditions. Main Features: ✅ Working length: 3 meters – allows bending of large sheets, increasing work efficiency. ✅ Robust steel construction – guarantees durability and resistance to deformation. ✅ Precision bending – perfect for manufacturing roofing components, metal cladding, and gutters. ✅ Easy operation – an intuitive control mechanism enables fast and accurate sheet forming. ✅ High clamping force – stabilizes the material and guarantees consistent bends across the entire length. Our 3-meter sheet metal bender is an indispensable tool on every construction site, enhancing the quality and efficiency of roofing work. 3-Meter Sheet Metal Bending Machine – Technical Data Maximum bending length: 3100 mm / 122" Maximum bending capacity: Steel sheet: up to 0.7 mm Aluminum sheet: up to 1.0 mm Copper and zinc sheet: up to 1.0 mm Maximum bending angle: 130° Bending beam thickness: 30 mm Max. clamping beam stroke height: 80 mm Overall dimensions: 3460 x 900 x 1200 mm Weight: Approx. 450 kg (varies depending on configuration) Clamping system: Manual with high clamping force for stable operation Construction: Robust steel frame for longevity and precision Included accessories: Rear support arms for large sheets Functional angle gauge for precise angle bending Roll slitter/shear – for quick and accurate cutting along the working length of the bender Optional accessories (not included): Fodpfev Ax N Dsx Abtegc Transport swivel casters with lock (set of 4) – €160.00 This 3-meter sheet metal bending machine offers precision, durability, and ease of use, making it the ideal choice for roofers and professionals requiring reliable performance in sheet metal forming. Contact us for more information and to find the perfect model to suit your requirements! FREE SHIPPING within Germany (DE). Shipping costs to other countries upon request.

Stanje: dober (rabljeno), Leto izdelave: 1999, Dvoranski žerjav, žerjav, električna vitel s jekleno vrvjo, ročni voziček, valjčni voziček, voziček žerjava, voziček mačka, tekalni voziček, voziček žerjava, voziček za progo, viseča proga-voziček, dvižni mehanizem, -Proizvajalec: Stahl, voziček žerjava z električnim vitlom za jekleno vrv Fgedpotlzdqofx Abtjc -Vitel: tip AS 3016-16 2/1 -Nosilnost: 3200 kg -Glavno dvigovanje: 8 m/min -Fino dvigovanje: 1,35 m/min -Pogon vozička: FA-C 3728 133-1 -Hitra počasnost vožnje: 5/20 m/min -Razmak valjev: 1400 mm, mere glejte slike -Hitrost bobna: 16,0 / 4,0 m/min -Količina: na voljo 1 voziček žerjava -Cena: na kos -Transportne mere: 1670/1200/V470 mm -Teža: 462 kg/kos.

Leto izdelave: 2006, stanje: dober (rabljeno), Superturbo-Ofen, Modell Pulsar, 180 m³, intermittierender Typ mit einer Brenntemperatur bis 1150°C und einer Höchsttemperatur von 1200°C, ausgestattet mit 24 Hochgeschwindigkeitsbrennern. Fsdpfohgkdqsx Abtjgc

Leto izdelave: 1960, stanje: dober (rabljeno), številka stroja/vozila: 970015, Load capacity with faceplate in horizontal position: 10 t Load capacity with faceplate in vertical position and center of gravity at 300 mm: 10 t Load capacity with faceplate in vertical position and center of gravity at 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically infinitely variable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range upwards: 140 s Swivel time for full swivel range downwards: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Fodpfx Ajcblc Sobtegc Counterweight weight: 2.3 t

Stanje: rabljeno, Leto izdelave: 1965, Na voljo sta dva WMW SU 315x3000, priključna moč stroj 1/2: 12,6/12 kW, teža stroj 1/2: 8,2/9 t, potrebna je revizija. Fgodpjxg Ihgofx Abtoc

Stanje: rabljeno, Leto izdelave: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Clearance between shaping spindle / machine body 205 mm Spindle bore approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 /min Table size 400 mm Table bore 125 mm Height between table and shaping head min./max. 190/290 mm Fixed shaping spindle overhang 250 mm Axial table travel approx. 295 mm Fodet Hww Dspfx Abtegc Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Circular feed at tool Ø 125 0.125 - 3.150 mm /stroke Spindle/main drive approx. 19 kW / 25 kW- 380 V - 50 Hz Weight 7,000 kg Accessories / special equipment: - Hydrostatic linear guides with separate hydraulic unit, - Built-in 100 mm intermediate plate for increased shaping head position, - Hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and internal clamping, various clamping chucks for different workpiece diameters - Infinitely variable stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master) - Automatic stroke rate and automatic feed change for roughing and finishing in up to 3 cuts, - Automatic and motorized stroke end lock in upper position after finishing, - Separate control and switch cabinet, - Integrated coolant system with chip conveyor and magnetic separator - Approx. 20 change gears, Condition: satisfactory to good, soon ready for demonstration Delivery: ex stock - as inspected Payment: strictly net, upon receipt of invoice

Stanje: novo, Leto izdelave: 2026, Sheet metal working machines of the RED type are the hallmark of Prod Masz. Every RED folding machine features a slim bending beam, regardless of its length, and thanks to side recesses, can bend on 3 sides. There are 2 handles on each side. An additional advantage is increased interior space for easier bending operations. Professional Folding Machine RED PLUS with Foot Pedal Technical Specifications: - Maximum working length: 3200 mm - Bending capacity: 0.8 mm (steel) - 1.2 mm (aluminum, copper, zinc) - Bending beam thickness: 15 mm - Bending angle: max. 160 degrees - Upper beam opening: 80 mm - Weight: approx. 700 kg - Rotary shear available for an additional €350 - Price includes front depth stops and rear frame - 3-side bending capability -> side cutouts - Recess: 60mm/45° Fodpfxjcrcgqo Abtegc Scribing template INCLUDED FREE :) Price: €6,600.00 Delivery costs: €360.00 Delivery time: Weekly Payment: Cash on delivery or prepayment We look forward to hearing from you! Invoices are issued with 0% VAT as intra-community supply or plus 19% VAT.

Stanje: rabljeno, maks. dolžina obdelave 3200 mm Fgsdpfsyrbqaex Abtsc maks. debelina materiala 3 mm pri železni pločevini