Portalna Dvigala nakup rabljenega (1.007)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, 2x125 tonski portalni žerjav, dvigalna višina 30 metrov, letnik 2013. Gisdegmdnfopfx Aa Uou

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Portalni žerjav po obnovi, nosilnost 35 ton, razpon 18 metrov Godsgggh Aopfx Aa Usiu

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Portalni žerjav Bollegraaf 30 ton, 32 metra, 10 metrov dvižne višine Giodsw S Ea Sspfx Aa Uju

Stanje: rabljeno, številka stroja/vozila: 5737, Leto izdelave: 1991, obratovalne ure: 6.587 h, First registration Gross vehicle weight: 7,490 kg Drive: Diesel 4x4 Driven by a 6-cylinder Mercedes diesel engine with 92 kW / 125 hp, displacement 5,957 cm³ 16-speed manual transmission Driver’s cab with 3 seats Tire size 365/80 R 20, tread depth 14-16 mm, wheelbase 3,300 mm Overall dimensions (L x W x H): 5,500 x 2,265 x 3,400 mm Unladen weight: 6,960 kg Axle load front: 4,400 kg, rear axle load: 4,400 kg ABS, radio, differential lock, power steering, wheel chocks Hiab 050 crane with cable remote control 3-way tipper non-functional due to weight reduction, body dimensions 230 x 210 x 45 cm Steel side panels Gjdszcbngspfx Aa Uoiu 40 mm tow coupling, 2 x rear recovery doors, winch, hydraulic system front and rear, gearbox damaged (vehicle only drives in low range), dashboard damaged, rust damage in cab—see pictures. Further details and additional images available on request. This description does not constitute a binding offer and may contain errors. No warranty on all specifications.

Stanje: rabljeno, številka stroja/vozila: 7033, Leto izdelave: 1984, obratovalne ure: 21.102 h, 20,000 kg Drive: Diesel 4x4 Maximum lifting capacity: 20,000 kg at 3 m, 1,700 kg lifting capacity at maximum outreach of 18 m Total crane weight: 22,400 kg Transport dimensions: 10.86 m x 2.50 m x 4.0 m Slewing range: 360° Axle configuration: 4x4 Hydraulic suspension Displacement: 6,086 cm³ Power: 89 kW (121 HP) at 2,500 rpm Engine: 6-cylinder Deutz diesel engine, water-cooled Gsdjzcbmiepfx Aa Ujiu Transmission: 4-speed automatic transmission Tyres: 385/95R24, tread depth front 21 mm, rear 18 mm ID 7033 Further information and additional photos available on request. This description does not constitute a binding offer and may contain errors. No guarantee on the accuracy of all information.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Gantry-Type Portal Milling Machine / Manufacturer: WALDRICH SIEGEN / Model: PF-S-150 - 1953: Original year of manufacture (initially a planing machine) - 1974: Retrofitted by the manufacturer WALDRICH SIEGEN to a portal milling machine (brand new milling head) - 2001: Upgraded to CNC technology, with new control system - 2015: Table drive converted to NC - 2024: Gantry drive conversion Processing Capabilities: - Milling/Drilling: both horizontal and vertical The machine can be inspected under power by appointment. Condition: Operational / Ready for use. TECHNICAL DATA / DESCRIPTION: Axis Travel (CNC feed axes): - Table: 14,000 mm - Crossbeam slide: 4,500 mm - Crossbeam: 4,000 mm - Upright clearance: Width 4,545 mm - Clear opening: 4,200 mm - Height from table to spindle: 4,000 mm - Quill stroke: 450 mm - Table dimensions / Clamping surface: 14,000 x 4,350 mm - Table load capacity: max. 200 t (10 t point load) - Main spindle motor power: 125 kW - Total machine weight: approx. 350 t - Overall footprint: Length 40 m / Width 10 m / Height above floor 9 m EQUIPMENT / ACCESSORIES: - CNC control: SINUMERIK 840D - Documentation - Further extensive equipment ... No guarantee for completeness or accuracy of the technical details or equipment. Subject to prior sale. Giedpfsyz Ru Usx Aa Usu

Stanje: dober (rabljeno), Schneider Senator PL1 Q-600-H dvigalo za papirne skladke Stroj je v popolnem stanju, praktično nov. Hidravlični pogon, sodobna hidravlična enota. Gjdpfszc Rwwjx Aa Uoiu Napajanje: 400V. Samodejni in ročni dvižni cikli, hitro delovanje. Nosilnost: 600 kg. Dimenzije palete/pol: 760 x 1090 mm.

Stanje: rabljeno, Leto izdelave: 1995, CNC portalna rezalna plamen stroj Proizvajalec: Messer Tip: Omnimat P 7000 Leto izdelave: 1995 CNC krmiljenje: Global Control Plus Širina tirnice: 7.000 mm 8 x avtogenih gorilnikov tipa ALFA Gisdeyay Dhopfx Aa Usu 8 x Omnilift 200 Brez tirnice Brez mize Brez filtra

Leto izdelave: 2016, stanje: rabljeno, skupna masa: 300.000 kg, skupna dolžina: 16.000 mm, skupna širina: 9.000 mm, skupna višina: 8.000 mm, Waldrich Coburg 17 S-10 FP 300 NC / 5 m – CNC portlna rezkalna stroj Godjzc Sagopfx Aa Usiu Stroj: 17-10 FP 300 NC / 5 m Serijska številka: 2.8304.06 Leto izdelave: 1983 Stroj je bil leta 2016 v proizvajalčevem podjetju Waldrich Coburg celovito generalno obnovljen in moderniziran. Opremljen je s sodobnim krmiljenjem Siemens SINUMERIK 840D sl ter je idealen za težko obdelavo velikih in kompleksnih obdelovancev v strojegradnji, orodjarstvu, izdelavi modelov ter energetskih naprav. Dobava vključuje univerzalno vilasto rezkalno glavo USP 300 C 350 z B-osjo ter dodatno kotno rezkalno glavo WFU 500 SZ 400 F17, kar zagotavlja široke možnosti za zahtevne rezkalne naloge. Stroj ima sodobno popolno zaščitno ohišje, hladilno napravo, transportni sistem za odrezke in obsežno tehnično dokumentacijo, vključno s shemami in dokumenti o generalni obnovi. Naprava je strokovno demontirana in zložena v kontejnerje. Trenutno se nahaja v pristanišču Hamburg, je takoj na voljo in pripravljena za pošiljanje po vsem svetu. Proizvajalec: Waldrich Coburg Generalna obnova: Waldrich Coburg (2016) Siemens SINUMERIK 840D sl Univerzalna vilasta rezkalna glava USP 300 C 350 Dodatna kotna rezkalna glava WFU 500 SZ 400 F17 Masa obdelovanca do 100 t Popolno zaščitno ohišje Obsežna tehnična dokumentacija Demontirano in pripravljeno za nalaganje Lokacija: pristanišče Hamburg, Nemčija Takoj na voljo Pomiki osi X: 5700 mm Zasuk osi B: 0–180° Dimenzije (D × Š × V): pribl. 16 000 × 9 000 × 8 000 mm Prehod med stebri: 3.500 mm 5-osna obdelava: da Pomiki osi Y: 3.500 mm Teža: pribl. 300.000 kg Pomiki osi W: 800 mm Pomiki osi Z: 2.050 mm Vpenjalo orodja: ISO 50 Leto obnove: 2016 Stanje: ni testirano Plačilni pogoji: 100 % predplačilo pred prevzemom Dobavni pogoji: FOB prosto vkrcanje Pod napetostjo: ne

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.360 mm, pomik po osi Z: 1.000 mm, največja hitrost vretena: 15.000 obr/min, model krmilnika: Heidenhain TNC430 PA, Submitting a bid obligates you to collect the item within week 25! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Gisdpfx Aoy Sxkroa Uou Travel range Y-axis: 2,360 mm Travel range Z-axis: 1,000 mm Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Rapid traverse X-axis: 20 m/min Rapid traverse Y-axis: 20 m/min Rapid traverse Z-axis: 20 m/min Spindle speed (max.): 15,000 rpm Torque: 57 Nm Spindle power: 18 kW Clamping table (L x W x H): 4,500 x 2,000 x 400 mm Longitudinal T-slots: 18H12 T-slot spacing: 250 mm Tool holder: HSK 63 F Tool clamping: hydraulic MACHINE DETAILS Control system: Heidenhain TNC430 PA Input power type: 3-phase current Power requirement: 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: 63 A Dimensions & Weight Machine footprint without control cabinet (L x W x H): 6,000 x 3,500 x 4,050 mm Total weight: 15,000 kg EQUIPMENT Infinitely variable spindle speed Tool changer TT140 probe Note: Machine is supplied without enclosure. The zero-point clamping plates and other accessories shown in the images are not included in the scope of delivery.

Leto izdelave: 2025, stanje: novo, Vacuum Lifter BARBARIC, Swivelling, incl. Column Slewing Crane Equipment package Giedpfxsc Umfte Aa Usu consisting of: - Vacuum lifter uniWood B3-90 Degree - 250 Comfort version with integrated chain hoist, reinforced, load capacity: 250 kg Suitable for the vertical and horizontal transport of flat, standard commercial panels. Vacuum generation is achieved pneumatically via ejector. A reinforced vacuum pump is installed for lifting permeable materials (MDF over 8 mm thick). -- Technical Data -- Lifting speed chain hoist: 0–10 m/min infinitely variable via frequency converter Lifting height (operating range): 2.0 m Chain length: approx. 3.5 m Operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Dead weight: approx. 85 kg -- Safety system -- The lifter is equipped with a vacuum gauge. Load release via 2-button operation - BARBARIC Column Slewing Crane Load capacity 250 kg at the hoist Consisting of: column, bracket, and low-friction jib. Supplied with trolley and energy supply system. Overall height: approx. 4.2 m Lower edge of jib: approx. 3.5 m Jib outreach: 5 m Slewing range: approx. 250° Manual slewing and trolley travel Base plate 700 x 700 mm with mounting materials. Supplied with chemical anchors for concrete floor. A prerequisite for this mounting is a suitably reinforced concrete floor. The static inspection of the floor is to be carried out and documented by the customer. Other versions and lengths available on request.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Portalna stružno-rezkalna stroj v gantry izvedbi | Letnik izdelave: 2010 Stroj si je možno po predhodnem dogovoru ogledati. Stanje: Pripravljen za delo. Tehnične specifikacije: - X-os (portal): 14.000 mm - Y-os (podpornik): 11.000 mm - Z-os (RAM): 3.000 mm - Pogonska moč RAM: 100 kW - Največja prehodna širina: 6.500 mm - Premer planske plošče: 5.000 mm - Krmiljenje: SINUMERIK 840D sl Stroj je zelo dobro opremljen. Za tehnične podatke in opremo ne jamčimo za popolnost in pravilnost. Vmesna prodaja pridržana. Diskretna prodaja. Giedpfx Aajy Dvwyo Uou Podrobni tehnični podatki in informacije o opremi so na voljo na zahtevo.

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: omejena funkcionalnost, CNC Gantry Milling Machine (Milling/Turning Center) | Manufacturer: DÖRRIES SCHARMANN | Model: 4FZT | Year of manufacture: 1996 A high-performance gantry milling machine designed for the machining of large workpieces. Main areas of application are the milling and turning of large, complex workpieces. The machine can be inspected under power by appointment. Condition: As per year of manufacture, partial overhaul required. This is a very high-quality machine, therefore absolutely worthy of modernization/complete overhaul – highly recommended. TECHNICAL DATA: Main dimensions: - Machine width: 13,230 mm - Machine height above floor: 8,450 mm Gijdpfoyuptzox Aa Usu - Machine length: 31,100 mm - Machining length: 11,000 mm - Passage width: 4,400 mm - Passage height from table surface to spindle nose of standard milling head: 3,000 mm Table: - Table width: 3,450 mm - Total table length: 13,400 mm - Single table length: 6,200 mm - Total clamping area: 3,450 x 11,000 mm - Clamping area single table: 3,450 x 5,000 mm - Maximum permissible workpiece weight total table: max. 112 t - Maximum permissible workpiece weight single table: max. 80 t Crossbeam: - Travel: 2,000 mm Milling and drilling support: - Drive power for milling and drilling operations (spindle): 80 kW - Max. spindle speed: 2,500 rpm EQUIPMENT / ACCESSORIES: - 2 tables - 8 machining heads - Control system: SINUMERIK 880 - 2 x chip conveyors - Documentation - CE marking No guarantee for completeness or accuracy of technical specifications and equipment. Subject to prior sale. A detailed technical data sheet and further information on equipment available on request.

Stanje: rabljeno, Pulley block, crane hook Description: Load capacity: 10 tonnes Own weight approx. 190 kg each Gijdju Nvlgspfx Aa Ueu Sheave diameter: 500 mm; width: 58 mm; rope groove: 40 mm Load hook length: 420 mm; hook opening: 90 mm; mounting: 110 mm with safety latch Only one block still available for sale!

Stanje: rabljeno, Leto izdelave: 1984, Technical details: Drum rotation speed: 16 rpm Speed range: min./max.: 0.23 / 0.34 m/sec Operating pressure: 85.3 psi – approx. 6 bar Maximum pulling force: 15 kN Minimum pulling force: 10 kN Weight: 389 kg Dimensions (L x W x H): 1.1 x 0.9 x 0.75 m Gijdju Nv Ubjpfx Aa Uju - Pneumatic CABLE WINCH - Robust steel construction - Base plate size: 700 x 340 mm - Pressure gauge display - Compressed air connection via 1" thread - Drum brake - Cable drum size: Ø 400 x Ø 250 x 230 mm - Without cable

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 29.081 h, Funkcionalnost: popolnoma funkcionalen, CNC control system HEIDENHAIN TNC 640, 15" Main computer MC Controller unit CC Keyboard TE 15" TFT color flat-screen with softkeys RAM: 4 GB Hard drive: 32 GB, of which at least 21 GB program memory Input unit / display increment linear axes: up to 0.1 µm Input unit / display increment rotary axes: up to 0.0001° Input range: max. 99,999.9999 mm or 99,999.9999° Circular interpolation in 3 axes with rotated machining plane Helical interpolation Linear interpolation in 5 axes Block processing time: 0.5 ms Ethernet: 2 x 1000BaseT USB: 1 x front USB 2.0, 4 x rear USB 3.0 Handwheel HEIDENHAIN HR510 Axis selection via buttons / softkeys Buttons for continuous axis movement Emergency stop button Magnetic mounting Enable switches / deadman switches according to CE Gijdsyrndmepfx Aa Ueu Travel distances X-axis / longitudinal axis: 4,000 mm Y-axis / cross axis: 2,500 mm Z-axis / vertical axis: 1,300 mm Feed / Connection / Pneumatics Max. feedrate interpolating axes: 40 m/min Installed power: 60 kVA Max. current consumption: 150 A Pneumatic air consumption: 400 Nl/min Pneumatic working pressure: 6 bar Clamping Table / Floor Plate Sunken clamping table with leveling units Table size: 2,500 x 4,000 mm Table height: 300 mm Load capacity: 10 t/m² T-slot width: 28 H12 mm T-slot spacing: 250 mm Milling Head / Universal Milling Head Universal milling head with continuous movement in 2 axes 5-axis machining Direct drives for rotary axes Rotary axes as interpolated CNC axes Automatic tool clamping Undercut machining possible up to 10° Integrated cooling of torque motors and spindle bearings C-axis swivel range: +/- 270° A-axis swivel range: +/- 185° Max. rotational speed A-/C-axes: 30 rpm Working torque A-/C-axes: 450 Nm Clamping torque axes: 1,400 Nm Axis positioning inaccuracy A-/C-axes: 8 arcsec Axis positioning scatter A-/C-axes: 4 arcsec Main Spindle Spindle output S1 / S6: 22 / 33 kW Spindle torque S1 / S6: 84 / 128 Nm Max. spindle speed: 18,000 rpm Constant output: 2,500 - 18,000 rpm Constant torque: 10 - 2,500 rpm Tool interface: HSK-A63 DIN 69893 Thread cutting rigid / Rigid Tapping for electro-spindle Software / Calibration Dynamic RTCP Software AUTOCAL software for automatic calibration 3D Form Inspect M&H Software Software for measuring 3D forms, tools, molds, and dies Measurement program creation directly via coordinate points / surface points Vibration / Collision Monitoring Sensor for detection of vibrations Detection of collisions and excessive vibrations in 3 axes Response time approx. 1 ms Electronic interface for function testing Tool Changer Tool changer with arm for tool change Overlapped-wheel version Full enclosure for operator safety Tool stations: 80 Max. tool diameter: 75 mm Max. tool diameter with free adjacent stations: 125 mm Max. tool weight: 10 kg Max. tool length: 600 mm for 40 tools Max. tool length: 250 mm for 40 tools Tool type: HSK-A63 DIN 69893

Stanje: dober (rabljeno), Leto izdelave: 2016, CNC portalni stroj za termično rezanje Proizvajalec: Sato Tip: Satronik D5765 Leto izdelave: 2016 Gsdpfx Aaogqkc Nj Usiu CNC krmiljenje: Satocontrol CNC 3010 Širina tira: 5.750 mm 6 avtogenskih gorilnikov brez tirnice brez mize brez filtra 3626ä

Stanje: rabljeno, FOREST-LINE SERAMILL V3 270 2T je portalni glodajući centar za visokopreciznu obradu, visoku tačnost i pouzdanost procesa. Tehničke karakteristike: 2 stola (dužine 3000 mm i 4000 mm, širina 2000 mm), X osa 5000 mm (sa jednim stolom), Y 3400 mm, Z 1250 mm, osa A ±135°/2,5° i C 360°/2,5°; prolaz između stubova 2700 mm, maksimalna težina obratka na stolu 10.000 kg. Glavni podaci: prihvat vretena SK50, obrtaji 10–6000 min⁻¹, motor vretena 31 kW, obrtni moment 430 Nm, ukupna potrošnja 90 kVA; posmici osa 1–30.000 mm/min; brzi hod X 30.000 mm/min, Y 40.000 mm/min, Z 30.000 mm/min; priključak 3x 400 V 50 Hz. Oprema: magacin za alat 120 mesta, držači alata 700 kom, automatsko merenje alata BLUM, mjerni sondor obratka M&H. Dostiže uske tolerancije; pogodan za automobilsku industriju, vazduhoplovstvo i svemirsku industriju, proizvodnju alatnih mašina, medicinsku tehniku i industriju satova. Giodpfx Ajy T N Ttja Usu

Leto izdelave: 2024, stanje: novo, Suitable for Demag chain hoist (DK 1, DKUN 1, DS1 125-250 kg) / Motor KD63 / Friction trolley drive DRF200 Gjdpfx Aajq U Iits Usiu Replacement fan cover / fan hood – not an original part! OEM part number 12481133 Larger quantities available on request. NEW, unused Item location: 75053 Gondelsheim See photos for details.

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Prvo zagonsko leto: 2002 Krmiljenje: Heidenhain iTNC530 Delovne ure stroja: sledi X-os: ca. 6.000 mm Y-os: ca. 3.500 mm Z-os: ca. 1.100 mm A-os: C-os: 2-osna rezkalna glava Maks. hitrost vretena: 14.000 min⁻¹ Dodatna oprema Giedpfxeyzz R Ho Aa Uju - Ohišje na obeh straneh Stanje stroja Popolnoma delujoč, v zelo dobrem stanju. Stroj je še vedno priključen na elektriko in je takoj na voljo.

Stanje: rabljeno, Leto izdelave: 2007, lastna masa: 1.400 kg, vrsta goriva: električni, Weight: 1,400 kg Gisdozb Uzdjpfx Aa Usu Load capacity: 250 kg Dimensions: 2.10 x 1.10 meters Electric 230V charger included. Price: €6,400 excluding VAT.

Stanje: dober (rabljeno), Leto izdelave: 1994, Pomik v osi X 7.300 mm Prehodna širina med stebri 3.100 mm Godpfxey Ny Dhs Aa Ujiu Razdalja od čela vretena do pritrdilne plošče 1.500 mm Ploščno polje 2.500 x 7.000 mm Krmiljenje Heidenhain TNC 415 a samodejni menjalec orodij Podpora SR 40, 40 kW, ISO50, 4.000 min-1 Kotna rezkalna glava WFKU, 30 kW, 4.000 min-1 Podaljšek vretena VFL, 30 kW, 4.000 min-1

Stanje: dober (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, Upravljalni center za obdelavo profilov, portalni rezkalni stroj Tip: MBZ 72/80-3 Godpfx Aey S Hazea Ujiu Leto izdelave: 2002 Stanje: rabljeno Tehnični podatki: x-os: 7000 mm y-os: 1000 mm z-os: 370 mm Pogonski motor vretena: 6,8 kW Število vrtljajev vretena: 20.000 min⁻¹ Vpenjalna glava: SK30 Vpenjalni vijak DIN 69872 Izmenjevalec orodij: 12 Posebna oprema/dodatki: – Centralno mazanje Vögele – Niels sistem minimalnega mazanja – Vakuumski sistem z 8 vpenjalnimi moduli – 8 vpenjalnih glave za orodje z orodjem – Sonda za merjenje obdelovanca z držalom za orodje – Dokumentacija

Stanje: dober (rabljeno), potovalna razdalja osi X: 1.940 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 700 mm, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 15.000 obr/min, obremenitev mize: 3.500 kg, Stroj je v dobrem delovnem stanju. Deli, prikazani z roko, niso vključeni. Godpfx Aaoylxg Eo Ujiu

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: nepreverjeno, številka stroja/vozila: 3.8009, potovalna razdalja osi X: 10.000 mm, pomik osi Y: 3.500 mm, pomik po osi Z: 1.200 mm, dolžina podajanja os X: 10.000 mm, dolžina pomika po osi Y: 3.500 mm, dolžina podajanja os Z: 12.500 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, hitrost vretena (min.): 5 obr/min, največja hitrost vretena: 5.000 obr/min, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 30 m/min, hitri pomik na osi Z: 20 m/min, razdalja med stojali: 2.500 mm, vrsta vhodnega toka: Klimatska naprava, moč vretenovega motorja: 63.000 W, The machine was originally manufactured as a heavy-duty CNC portal milling machine for large part and heavy-duty machining sectors in a collaboration between Waldrich Coburg and Waldrich Siegen. 63 kW milling and drilling unit NC universal milling head B and C axis Automatic tool changer 60-position tool magazine ISO50 / SK50 Coolant through spindle (IKZ) Fully enclosed work area Heavy-duty industrial build Electronic handwheel Siemens Sinumerik 840D Heavy-duty CNC portal milling machine from Waldrich Siegen for machining large and heavy workpieces. The machine comes from an ongoing industrial project / site closure and is already dismantled and prepared for transport. Especially suitable for: Heavy-duty machining Large part machining Mechanical and plant engineering Steel construction Tool and mould making Important note: Due to a short-notice site clearance, the machine must be collected from Rüsselsheim by mid/end of June at the latest. Gsdpfjy Sywgex Aa Usiu This allows for a very attractive special price. Sale from location. Subject to prior sale and errors.