Biesse Rover 15 nakup rabljenega (320)

Stanje: rabljeno, Leto izdelave: 2008, Biesse Rover A 3.40 FT K2 Numerisch gesteuertes Bearbeitungszentrum ROVER A 3.40 FT K2 Arbeitsbereiche: X = 3685 mm; Y = 1290 mm; Z = 160 mm Ausstattung: Automatisches Schmiersystem FT-Nestingtisch 4 vordere Anschläge + 4 hintere Anschläge, pneumatisch betätigt und mit Sensoren ausgestattet 4 seitliche Anschläge, pneumatisch betätigt und mit Sensoren ausgestattet Vakuumpumpe 300 m³/h 12 kW (16,1 PS) Elektrohspindel mit ISO 30 Adapter, luftgekühlt Blaseinheit-Flansch für die Aufnahme von Aggregaten an der Elektrohspindel Vorrüstung für Bearbeitungsaggregate mit 360°-Interpolation und Getriebeantrieb Gsdpox Afvtjfx Ab Tskf Bohrkopf BH 21 L Revolverkettentauschsystem mit 18 Werkzeugplätzen Vorrüstung zur Montage des automatischen Ausschleusgeräts für nestbasierte Werkstückbearbeitung Bedienelemente am Fernbedienungspanel Numerische Steuerung XP600 BIESSEWORKS BIESSE NEST Modul Klimaanlage für den Schaltschrank Umrichter Sicherheitsvorrichtungen mit Druckmatten (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Preise exkl. Inserierungskosten MaschinenSucher Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 94464, potovalna razdalja osi X: 3.400 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 155 mm, DÉTAILS TECHNIQUES Course de l’axe X : 3 400 mm Course de l’axe Y : 1 300 mm Course de l’axe Z : 155 mm Nombre de zones de travail : 2 Tête de perçage Gedsxx Rz Topfx Ab Tokf Broches verticales sur l’axe X : 10 Broches verticales sur l’axe Y : 12 Broches horizontales sur l’axe X : 6 Broches horizontales sur l’axe Y : 2 DÉTAILS DE LA MACHINE Données électriques Puissance : 20 kW Tension : 380 V Courant : 25 A Fréquence : 50 Hz ÉQUIPEMENT Électrobroche verticale avec axe C Vector, changeur d’outils automatique, cône ISO 30 Magasin automatique pour outils avec trois positions latérales pour agrégats Changeur d’outils automatique à 20 positions avec chaîne 8 barres manuelles réglables pour supports ventouses avec afficheur 3 ventouses réglables manuellement par barre 8 barres pneumatiques en bakélite pour le levage des panneaux Clôture de sécurité périphérique Tapis motorisé pour l’évacuation des copeaux Pompe à vide

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.900 mm, pomik osi Y: 1.300 mm, pomik po osi Z: 140 mm, hitrost pomika os X: 75 m/min, hitrost podajanja osi Y: 75 m/min, hitrost podajanja os Z: 15 m/min, proizvajalec krmilnikov: XNC, hitrost vretena (min.): 1.000 obr/min, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 11.000 W, število vreten: 1, število mest v zalogovniku orodij: 7, Oprema: CE označba, dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Biesse Rover 23 lesno-obdelovalna postaja – popolnoma opremljena Stroj je še vedno v uporabi, 1 do 2 dni na teden, zaradi prenehanja dejavnosti na Slovaškem pa je naprodaj. Vedno dobro vzdrževan. ✅ Visoka zmogljivost Rezkalno vreteno s keramičnimi ležaji (11 kW) Nastavljiva hitrost: 1.000 – 24.000 obr/min Vrtalna glava z 10 navpičnimi in 6 vodoravnimi svedri Krožna žaga na osi X ✅ Učinkovitost & prilagodljivost Pnevmatsko nastavljivi vakuumski kalibri v 6 vrstah, 3 na vrsto Gkedpfxew S Edws Ab Tsf Vakuumska črpalka 100 m³ Shranjevalnik orodja s 7 mesti (ISO 30) Vključuje vse adapterje in orodja ✅ Uporabniku prijazno Transportni trak za avtomatski odvod odrezkov Takoj pripravljen za uporabo, popolnoma opremljen 📍 Stroj se nahaja na Slovaškem, razstavljanje in prevzem na kraju samem je treba opraviti samostojno.

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: nepreverjeno, številka stroja/vozila: 27233, potovalna razdalja osi X: 5.047 mm, pomik osi Y: 2.060 mm, pomik po osi Z: 275 mm, hitrost pomika os X: 100 m/min, hitrost podajanja osi Y: 100 m/min, hitrost podajanja os Z: 30 m/min, širina mize: 1.650 mm, dolžina mize: 4.500 mm, največja hitrost vrtenja: 24.000 obr/min, skupna masa: 600 kg, Naprodaj je vrhunski CNC-obdelovalni center Biesse Rover 35 L, zmogljiv stroj, idealen za natančno obdelavo lesa, plastike in kompozitnih materialov. Stroj prepriča z robustno konstrukcijo, visoko natančnostjo in vsestranskostjo – popolna izbira za srednje velika ter industrijska proizvodna podjetja. Ker je bila uvedena večja CNC-stroj, Biesse Rover 35 L v zadnjih 5 letih ni bila uporabljena. Orodja, prikazana na slikah, so vključena v prodajno ceno. Gsdpfx Aoxpf Rwsb Tokf Znane pomanjkljivosti: - C-os ni funkcionalna - Kontaktne preproge so okvarjene - Vakuumske priseske je priporočljivo zamenjati. Na voljo: takoj

Stanje: rabljeno, številka stroja/vozila: 008011, Delovno območje os X: 6200 mm Delovno območje os Y: 1935 mm Delovna površina: Z vakuumskimi konzolnimi podstavki Moč glavnega vretena: 10,5 kW Število nadzorovanih osi: 4 osi Število vrtalnih vreten: 40 Gkodewu Af Eepfx Ab Tjf Število mest za orodja: 22

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 2.080 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10000144427, potovalna razdalja osi X: 5.580 mm, pomik osi Y: 2.917 mm, pomik po osi Z: 378 mm, hitro pomikanje X-os: 85 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 20 m/min, nazivna (navidezna) moč: 13 kVA, proizvajalec krmilnikov: BIESSE, model krmilnika: BH660, dolžina obdelovanca (maks.): 4.300 mm, širina obdelovanca (maks.): 2.205 mm, višina obdelovanca (maks.): 170 mm, širina mize: 22.005 mm, dolžina mize: 4.300 mm, največja hitrost vrtenja: 24.000 obr/min, skupna masa: 3.840 kg, največja hitrost vretena: 24.000 obr/min, moč vretenovega motorja: 13.200 W, število vreten: 10, število mest v zalogovniku orodij: 8, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, Obdelovalni center CNC Biesse Rover A 2243 FT z avtomatskim sistemom za nakladanje/razkladanje. Ta stroj iz leta 2017 ima veliko ravno delovno mizo dimenzij 4.300 mm x 2.205 mm, ki je razdeljena na 12-conski Multizone vakuumski sistem za neodvisno vpenjanje obdelovancev. Stroj je opremljen z zmogljivim elektrovrtilom HSK-63F z močjo 13,2 kW in maksimalno hitrostjo 24.000 rpm. Menjavo orodij omogoča revolverski magazin z 8 mesti. Na voljo je tudi vrtalna enota BH10L z desetimi neodvisnimi vertikalnimi vreteni. Ključna prednost je popolnoma avtomatski sistem za ravnanje z materialom, ki vključuje škarjasto dvižno mizo za nakladanje palet (največja nosilnost 6 ton), napravo za poravnavo in označevanje ter servo-gnano roko za samodejno razkladanje na 4.800 mm dolg izhodni transportni trak. Stroj upravlja numerični krmilnik BH660 CNC in vključuje programsko opremo bSolid z modulom bNest za gnezdenje (nesting) operacij. Gkjdpfexy S Dfjx Ab Tof

Stanje: rabljeno, Leto izdelave: 2008, Biesse Rover A 3.40 FT - NBC 412 Automatische Nesting-Zelle Beschreibung: Rover A 3.40 FT Zentralisiertes automatisches Schmiersystem 8 vordere + 8 hintere Anschläge mit Sensoren 1 rechter Seitenanschlag mit Sensor Vakuumsystem für 2 Pumpen mit je 300 m³/h 12 kW (16,1 PS) Elektrospindel mit ISO 30 Adapter, luftgekühlt Gebläseeinheit Bohrkopf BH 18 A Revolverkettenspanner mit 10 Positionen Numerische Steuerung XP600 BiesseWorks - Advanced – Maschinen- und Büroversion BIESSE NEST Modul Be- und Entladearm, auf dem Maschinenbalken positioniert Be- und Entladetisch, auf der linken Seite des Bearbeitungszentrums platziert CE-Sicherheitseinrichtungen Drehklauen-Vakuumpumpe Mechanischer Anpressring mit pneumatischem Absenken, für Nestinganwendung (Alle Änderungen, Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Die besten Holzbearbeitungsmaschinen aus den Niederlanden De beste gebruikte machines uit Nederland Gkodpfx Ajwh Sfzsb Tsf

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis, pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis, pendulum operation: 600 mm Y-axis: 1,240 mm Worktable: 8 ATS workpiece supports, each with 3 vacuum suction cups 8 rear workpiece stops, lowerable via program, integrated in each support 8 workpiece stops, 670 mm from the back, mounted in each support, 2 + 2 lateral workpiece stops 4 removable central stops 6 lifting rails, pneumatically lowerable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum suction cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate working zones in X direction Vacuum support system for clamping templates Chip conveyor integrated in the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: Gsdpfx Ajxraimsb Tokf 16 vertical drilling spindles, each individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW S1 operation), HSK 63 F Mounted on Z1 axis Rotational speed 1,000 – 24,000 rpm Clockwise/counterclockwise rotation C axis, 360° for adapter units Cleaning nozzle for cleaning the milled edge before the edge-banding process 16-position tool magazine Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC-controlled, with endless 360° rotation Glue application for hot-melt adhesive Double pressure roller, changeable and switchable Heating lamp for preheating the edge material End trimming unit for cutting the edge material at an 8° angle to the workpiece edge using a circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid edge thickness 0.4 – 2 mm (*) (Best results obtained using primed wood edges 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14, max. 60 mm Min. internal radius 18 mm (for edge thickness less than 1 mm) Min. internal radius 30 mm (with edge thickness 2 mm) Min. panel size for edge banding: 300 x 300 mm Min. size for internal cutout banding: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety features: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/radius milling unit - Combined profile/flat scraper aggregate - Saw unit

Stanje: zelo dobro (rabljeno), Priložnost iz švicarske likvidacije v odličnem stanju Gksdpfx Absxhg Etj Tsf

Stanje: novo, Leto izdelave: 2022, Travel ranges (X,Y,Z) 6735 x 1930 x 245 mm Number of spindles vertical drilling head: 0 pcs. Number of spindles horizontal drilling head: 0 pcs. Number of tools: 39 pcs. Extraction nozzle diameter: 2x 250 mm Number of milling units: 2 pcs. Year of manufacture: 2022 Speed: 18,000 / 24,000 rpm Compressed air connection: 7 bar Motor power: 16.5 / 19.2 kW Pump capacity: 250 m³/h Control system: BH660 CNC Machining Centre BIESSE Rover B 1967 – BRAND NEW / STOCK MACHINE in original packaging! Working area: X = 6735 mm Y = 1930 mm Z = 245 mm with modules H = 74 mm Z = 290 mm with modules H = 29 mm (milling operation) Workpiece pass-through in Y: 1930 mm, with a thickness up to 60 mm on modules H = 74 mm; 1880 mm, with a thickness over 60 mm on modules H = 74 mm. Double-Y axis for 5-axis and 4-axis spindle (enables tool change during hidden time) Safety system with bumper and light barriers – 3-sided safety enclosure Gkedpfx Asxf Dwzeb Tef Uninterruptible power supply (UPS) 10 traverses – 30 base carriages Multiple clamping area automatic table positioning FPS HyperClamp clamping system 3 alignment rows 8 loading aids 250 m³/h vacuum pump Chip conveyor belt 5-axis spindle with 16.5 kW – 18,000 rpm Deflector preparation Unit interface 4-axis spindle with 19.2 kW PeakPower – 24,000 rpm C-axis separate Y-axis for 5-axis and 4-axis no drilling head! Turret changer travelling with 4-axis, with 8 positions Front turret changer for 5-axis, with 8 positions Saw pickup front for 5-axis Chain changer rear with 22 positions (Photo is for illustration purposes only!) BRAND NEW MACHINE IN ORIGINAL PACKAGING! Full manufacturer’s warranty! Installation, training, service: By official BIESSE dealer in Austria! HANDL Maschinen GesmbH & Co KG Trauseneggerdamm 5 4600 Wels

Stanje: rabljeno, številka stroja/vozila: 007087, X-axis working range: 4,300 mm Y-axis working range: 2,200 mm Gkjdpfx Absq U D D Ho Tof Working table: Nesting table Main spindle power: 12 kW Number of controlled axes: 4 axes Number of drilling spindles: 40 Number of tool positions: 30

Stanje: rabljeno, CNC obdelovalni center BIESSE Rover C 6.50 CONF.2, letnik 2007. -Delovna površina: cca 140 × 460 cm -Dimenzije stroja: 300 × 650 cm -Masa (teža) pribl. 6100 kg -Dve delovni glavi -Magazin: 22 mest -Vertikalni svedri: 28 kosov -Bočni svedri: 12 kosov Cena po dogovoru, na voljo takoj. Gedpfx Abow Rpd Se Tskf Cena je brez DDV.

Stanje: rabljeno, Leto izdelave: 2010, Biesse Rover A 3.40 FT K2 Beschreibung: Arbeitsbereiche: X = 3.685 mm; Y = 1.290 mm; Z = 160 mm Automatisches Schmiersystem FT-Arbeitstisch 4 vordere und 4 hintere Anschläge, pneumatisch gesteuert und mit Sensoren ausgestattet 4 Seitenanschläge, pneumatisch gesteuert und mit Sensoren ausgestattet Vakuumtank Godpfx Abexwcb Ne Tekf 300 m³/h Drehkrallen-Vakuumpumpe 12 kW (16,1 PS) Elektromotor mit ISO 30 Adapter, luftgekühlt Blaseinheit Flansch zur Montage von Aggregaten auf der Spindel Vorbereitung für ein Bearbeitungsgerät mit 360° Interpolation und Getriebeantrieb Bohrkopf BH 21 L Revolver-Werkzeugwechsler mit 18 Plätzen Vorbereitung zum Einbau eines automatischen Entladesystems für nestbasierte bearbeitete Platten Steuerung über Fernbedienung Numerische Steuerung XP600 BIESSEWORKS – Fortschrittliches Programmiersystem – Maschinenversion BIESSE NEST Modul Klimaanlage für Schaltschrank Frequenzumrichter Sicherheitseinrichtungen mit Sicherheitsmatten Vorbereitung für mechanisches Abtastsystem (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Preise exkl. Inserierungskosten MaschinenSucher. Die besten Holzbearbeitungsmaschinen aus den Niederlanden

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Uporabljeni CNC obdelovalni center za les Biesse Rover 35L, letnik 2001, v zelo dobrem stanju, kot je razvidno s fotografij. Obdelovalno območje X 4.500 mm, Y 1.650 mm, Z 180 mm. Opremljen z 10 KM zračno hlajenim elektrovretenom, verižnim izmenjevalcem orodij s 21 mesti, vrtalno glavo, vakuumsko mizo s stebrički in letvami ter vakuumsko črpalko Becker VTLF 2.250 (2011). Podatki o stroju Znamka / model: Biesse Rover 35L Leto izdelave: 2001 Tip: CNC obdelovalni center za rezkanje, vrtanje in obdelavo plošč ter masivnega lesa Gkodpfsx A Ap Rox Ab Tjf Stanje: zelo dobro, popoln, kot na fotografijah Območje obdelave: X = 4.500 mm Y = 1.650 mm Z = 180 mm Sestava / oprema: - Elektrovreteno 10 KM, zračno hlajenje, ISO30 - Verižni izmenjevalec orodij s 21 mesti - Vakuumska miza s stebrički in letvami (več vakuumskih stebričkov) - ATS predpriprava za vertikalno ali horizontalno pnevmatsko vpenjanje (za vrata, okvirje, robove itd.) - Vrtalna glava (več-vretenasta vrtalna enota) - Pokrovi za odsesavanje prahu na obdelovalni glavi - Vakuumski sistem Vakuumska črpalka: Becker VTLF 2.250 Leto: 2011 Kapaciteta: pribl. 250 m³/h Moč: 5,5 / 6,4 kW Maks. vakuum: 200 mbar Tehnični podatki Pribl. mere (D × Š × V): 7.580 × 4.570 × 2.800 mm Pribl. teža: 3.000 kg Dodatne informacije: Rabljeni stroj v zelo dobrem stanju, pripravljen za razstavljanje in natovarjanje Več slik in video na zahtevo Lokacija: Litva, v naši tovarni (ex works) Razpoložljivost: po dogovoru Cena: na zahtevo

Leto izdelave: 2001, Stanje: rabljeno, 4-AXIS CNC MACHINING CENTER BIESSE ROVER 24 S – USED 6.5 - Milling axis travels: X: 3100 mm Y: 1330 mm Z: 120 mm - 1 spindle for tools with ISO 30, equipped with 9-position tool changer - 1 drilling head with 16 drilling bits - 1 saw unit with 120 mm blade - BECKER vacuum pump, 90 m³/h - Vacuum suction panel clamping system - 7.5 bar - Serial no. 16384 - CE marked, year 2001 - Complete with manual and CE Declaration Gkedpfoh U R Sujx Ab Tsf

Stanje: novo, Leto izdelave: 2022, Travels (X,Y,Z): 3100 x 2205 x 170 mm Number of spindles, vertical drilling head: 0 Number of spindles, horizontal drilling head: 0 Number of tools: 14 Extraction port diameter: 200 mm Number of milling units: 1 Year of manufacture: 2022 Spindle speed: 24,000 rpm Compressed air connection: 7 bar Motor power: 9 kW Pump capacity: 2x 250 m³/h Control system: BH660 CNC Processing Center BIESSE Rover PLAST K 2231 FT – BRAND NEW / STOCK MACHINE in original packaging! Working area: X: 3100 mm Y: 2205 mm Z: 170 mm Safety system: FullBumper – accessible from all sides, no safety fence required Vacuum system with 8 zones 2x 250 m³/h vacuum pumps 9 kW 3-axis milling spindle Prepared for retrofitting of the C-axis (4th axis) No drilling head included! Movable side tool changer with 14 positions Air-Jet cooling system (Picture shows sample image!) ORIGINAL PACKED NEW MACHINE! Gkedpfx Aexfwduob Tef New machine warranty! Installation, training, service: By official BIESSE dealer in Austria! HANDL Maschinen GesmbH & Co KG Trauseneggerdamm 5 4600 Wels

Stanje: rabljeno, Leto izdelave: 2006, Numerical control XP 600 Working area in the X-axis: 3060 mm Working area in the Y-axis: 1140 mm Working area in the Z-axis: 160 mm Number of working zones: 2 Bar worktable Number of adjustable bars for suction cup support: 6 Number of pneumatic Bakelite bars for panel lifting (?): [please verify] 2 adjustable suction cups per bar, each with vacuum sealing for panel fixation during machining 1 vertical electrospindle with C-axis, 12 kW motor Tool change system with 10 positions, located at the machine drilling head, cone type: ISO 30 Drilling head BH19L with 18 spindles, configured as follows: - 7 vertical on the X-axis - 6 vertical on the Y-axis - 4 horizontal on the X-axis - 2 horizontal on the Y-axis - 1 independent saw blade unit for grooving in the X-axis Front photocell guard and safety system Automatic lubrication system (?) Climate control system for cooling and cleaning the machine control unit Gsdjv Aacfepfx Ab Tskf Vacuum pump: 250 m³/h TECHNICAL DETAILS MUST BE VERIFIED

Stanje: dober (rabljeno), Leto izdelave: 2002, X working range: 6,170 mm Y working range: 1,380 mm Z working range: 155 mm Main motor power: 7.5 kW Maximum spindle speed: 24,000 rpm Aggregate heads 4th axis C axis Tool changer positions: 10 Vertical drilling heads: 20 Horizontal drilling units X: 6 Horizontal drilling units Y: 2 Arm structure Gedsr E A U Iepfx Ab Tekf Worktable Console table Number of rails: 10 Positioning aid Vacuum pump capacity: 2 x 125 m³/h Chip conveyor

Stanje: rabljeno, Leto izdelave: 1992, Used machine Year of manufacture: 1992 Godowwnf Nepfx Ab Tjkf Working area: X-axis: 2310 mm Y-axis: 628 mm Z-axis: 90 mm Max. programmable feed speed: X-axis: 100 m/min Y-axis: 75 m/min Z-axis: 15 m/min Drill holder: 10 mm diameter Spindle speeds: 4000 rpm Groove saw: 120 mm diameter Drilling spindles: 4 horizontal spindles on X-axis 12 vertical spindles on the X-line Operating air pressure: 6 bar Maximum compressed air consumption: 0.75 NL/cycle Installed power: max. 7.5 kW Vacuum pump capacity: 40 m³/h CNC: Display: monochrome 9" Floppy disk drive PLC for machine cycle control Availability: short-term Location: Röllbach

Stanje: rabljeno, Leto izdelave: 2017, Numerical control with B-Solid software – 3D CAD/CAM program for designing, simulating, and managing processes. Machining of machining centers and drilling machines by Biesse. BNest software – software module for processing in nesting mode, allowing you to create projects. Includes a list of items with required production quantities and a list of sheets to be used, with the aim of minimizing material usage and machining times. Working area in X-axis: 4,300 mm Working area in Y-axis: 2,200 mm Number of working fields: 2 Nesting worktable Automatic loading system with side lift table Panel separation system with 2 suction cups No. 1 vertical 3-axis electrospindle, 13.2 kW, with automatic tool changer, HSK cone type Godpfx Abet Ul Dno Tokf Automatic tool changer system with 16 positions – located at the rear of the machine BH 10 boring head with 10 spindles arranged as follows: - 5 vertical in X-axis - 5 vertical in Y-axis Automatic unloading system with motorized conveyor belt Worktable cleaning system Printing and application system for adhesive labels with labeling machine, 22" monitor, keyboard and mouse with dedicated PC Protection and safety system with perimeter fences Safety system with bumpers Automatic lubrication system Air conditioning system for cooling and cleaning machine control unit No. 2 vacuum pumps, 250 m³/h each Installed power: 31 kW

Stanje: rabljeno, Leto izdelave: 2013, Machining center with automatic robotic loading and unloading system for panels. Numerical control: Biesse XP600 with graphical interface software Biesse Works ADVANCE (machine and office versions). WRT Technology (Windows Real Time): Machine control logic processed directly on the PC, not a dedicated specialist device. Working area X-axis: 6200 mm Working area Y-axis: 1552 mm Working area Z-axis: 180 mm Z-axis travel: 235 mm Number of working zones along X-axis: 2 Bar-type support table / console Gsdpfx Aokvrxuob Tokf Number of EPS bars (electronically controlled bar positioning for suction cup holders): 10 8 pneumatic Bakelite bars for panel lifting – assists loading and unloading 4 EPS electronically adjustable suction cups per bar, with vacuum seal for securing the panel during machining Spindle: 1 vertical electrospindle with automatic tool changer, 12 kW motor – 12,000 rpm, aggregate mounting flange, prepared for C-axis vector Automatic 12-position tool changer mounted on the machine head Drilling head BH35L, spindle configuration: - 14 vertical spindles in X - 10 vertical spindles in Y - 6 horizontal spindles in X - 4 horizontal spindles in Y Independent saw blade unit for grooving along X-axis – 120 mm diameter Front safety carpet and safety system Perimeter safety fencing Automatic lubrication system Machine-controlled cooling and cleaning system with air conditioner Vacuum pump 250 m³/h KUKA industrial robot with 6 articulated axes and point-to-point positioning. Independent operator console Panel orientation table Barcode scanner on the robot arm Panel feeding system including: * 1 motorized roller conveyor for preloading panel stacks * 1 motorized transfer roller conveyor * 1 motorized roller conveyor for unloading panel stacks Technical specifications: * Model: KR210-2 * Number of axes: 6 * Nominal payload: 210 kg * Machine weight: 1267 kg * Noise level: 75 dB * Installed power: 25.8 kW * Panel size – min./max. length: 300/3000 mm * Panel size – min./max. width: 180/1500 mm * Panel thickness – min./max.: 8/60 mm * Max. panel weight: 90 kg

Stanje: rabljeno, Leto izdelave: 2009, Biesse factory control Working area on X-axis: 3500 mm Working area on Y-axis: 1585 mm Travel on Z-axis: 350 mm No. 2 working zones Bar worktable No. 8 adjustable rails No. 4 pneumatic Bakelite rails for panel lifting 3 adjustable suction cups per rail with vacuum seals to hold the panel during processing Gsdpfx Absw D Dhae Tokf No. 1 four-axis vertical electrospindle (Vector) with automatic tool changer, HSK taper 10-position rotary tool changer on the machining head 24-position chain tool changer – located at the rear of the machine Drilling unit with vertical and horizontal spindles, composed as follows: - No. 12 vertical spindles in X direction - No. 12 vertical spindles in Y arrangement - No. 6 horizontal spindles in X direction - No. 4 horizontal spindles in Y arrangement - No. 1 independent saw blade for creating X grooves Front safety carpet and protection system Perimeter safety fence Chip extraction system with motorized conveyor Conditioning system for cooling and cleaning the machine control Vacuum pump 250 m³/h TECHNICAL DETAILS TO BE VERIFIED

Stanje: rabljeno, Numerical control XNC Working area on X-axis: 3400 mm Working area on Y-axis: 1300 mm Gksdpjv Edggjfx Ab Tsf Stroke in Z-axis: 155 mm Number of work zones: 2 Bar worktable 8 manually adjustable bars for suction cup holders, each with a display showing the working height 8 pneumatic Bakelite bars for lifting the panel Each bar equipped with 3 manually adjustable suction cups with vacuum seal for securing the panel during processing 1 vertical electrospindle with C-axis, Vector type, with automatic tool changer, ISO 30 taper, flange for aggregate use Automatic tool change system with 3 positions for side-mounted aggregates Automatic tool change system with 20 positions and chain Drilling head with the following configuration: - 10 vertical spindles on the X-axis - 12 vertical spindles on the Y-axis - 6 horizontal spindles on the X-axis - 2 horizontal spindles on the Y-axis Front carpet safety system and perimeter safety fence Motorized conveyor carpet for chip extraction Vacuum pump

Stanje: rabljeno, Numerical control NC 1000, software: Biesse Works. Working area on X-axis: 3685 mm; working area on Y-axis: 1290 mm; Z-axis stroke: 200 mm; component passage height: 70 mm. FT full plane nesting worktable. Automatic loading system with side lifting table. 1 vertical electrospindle with automatic tool change. Automatic tool changer with 18 positions, located at the rear of the machine. Drilling head with independent spindles arranged as follows: 7 vertical on X-axis, 7 vertical on Y-axis, 2 horizontal on X-axis, 2 horizontal on Y-axis. Automatic unloading system with motorized belt. Front safety and protection system with mats and limit nets. Automatic lubrication system. Air conditioning for the control panel. Vacuum pumps. TECHNICAL DETAILS TO BE CHECKED UPON ARRIVAL OF THE MACHINE. Gjdewufv Tepfx Ab Tekf

Stanje: rabljeno, Leto izdelave: 2017, Numerical control with B-Solid software Working area X-axis: 3600 mm Working area Y-axis: 1800 mm Number of working fields: 2 Stackable worktable Automatic loading system with side lifting table Label printing system with automatic application on the loading table Panel separation system with suction cups 1 three-axis vertical electrospindle, 13.2 kW, with automatic tool changer, ISO 30 taper Automatic tool changer with 16 positions – located at the rear of the machine Automatic tool changer with 8 positions – on the machine Drilling unit BH 10 with 10 spindles arranged as follows: - 15 vertical spindles on the X-axis - 17 vertical spindles on the Y-axis Automatic unloading system with motorized conveyor belt Workpiece cleaning system Protective and safety system with perimeter fences Safety system with bumper Automatic lubrication system Gedpfx Ajqvt D Rob Tekf Air conditioning unit for cooling and cleaning the machine control cabinet 250 m3/h vacuum pumps