Fronius Tps 450 nakup rabljenega (49)

Stanje: kot nova (razstavni stroj), ►►► FRONIUS TPS 3200 SET – OFFER ✅ Scope of Delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULSE SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard-equipped with Flow Control, Thermocontrol, and coolant filter. The chiller will automatically shut down if the water cooling fails or overheats to protect the hosepack. These features alone cost approx. €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our opinion, the most sensible feed case; wire is safely stored in a closed case. ➤ Fronius Long Intermediate Hosepack – Each unit is supplied with a 5-meter connection hosepack between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach spots! The hosepack is neatly placed on a hook attached to the side of the machine. (Hooks are custom-made by us) ➤ Fronius Large Trolley – Probably the best trolley with cylinder holder on the market. ➤ Binzel Hosepack – With up/down amperage control on the torch. ➤ Earth Cable 3-4m ➤ New Messer Pressure Regulator ➤ New Drum Adapter for large wire reels This unit can weld almost all materials, including aluminium, steel, and stainless (V2A). It has pulse wire programs and is suitable for MIG brazing (CuSi), commonly used in bodywork and sheet metal workshops. Additional options available at extra cost Ijdpfxowbil Se Ah Aoik E.g. Fronius Aw4000/Aw5000 Job Master hosepack (torch display) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the units? For your information, we purchase nearly-new used units, fully strip and inspect them, replace wear parts as needed, and only release them for sale after successful test welding. All machines are clean and have no burn or melt holes in the displays, nor are they covered in burn marks or dents! You buy from us an item that is ⭐worth seeing and not worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community EU supply, we can issue a net (tax-free) invoice. ►►►Which payment methods do you offer? Advance bank transfer or cash upon personal collection. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always keep 60-80 units in stock – exclusively Fronius, no other brands! We are experts with these machines and never sell anything we do not know inside and out.

Stanje: kot nova (razstavni stroj), Fronius TPS 3200 ✅ Scope of delivery: ➤ Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The unit shuts down if the water cooling fails or overheats to protect the torch assembly. These features typically cost around €400 extra at Fronius. ➤ Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most sensible wire feed case. The wire spool is safely stored inside the closed case. Iiedpfx Ahewbilxs Ajk ➤ Fronius intermediate hose package, long version – each unit includes a 5-meter connecting hose set between the power source and wire feeder for greater flexibility and improved handling. Take the wire feed case off the machine to reach difficult areas! The connecting hose is neatly mounted on a hook at the side of the unit (hooks are manufactured by us). ➤ Fronius large transport cart – Probably the best cart with gas cylinder holder on the market. ➤ Binzel torch package – With up/down amperage adjustment on the torch handle. ➤ Earth cable 3–4m Dobkh Hjum Rw Dsufpokk (unclear term left untranslated) ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools With this equipment you can weld nearly all materials, including aluminium, steel, and V2A. It features cold wire programmes and is also suitable for Mig brazing (CuSi), which is widely used in sheet metalworking. Additional options available for a surcharge, for example Fronius Job Master torch package (display on torch) + EUR 500.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna, Austria 1230! ✔ Insured shipping on pallet available! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the equipment? For clarification: we buy nearly new pre-owned units, dismantle and check everything, replace wear parts if necessary, and only release for sale after successful test welding. "All" equipment is clean and has neither burn marks on the display nor multiple burn holes or dents across the unit! You are buying an item from us that is also ⭐worth seeing and does not look completely worn out! ►►►Do we receive an invoice with the purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for an intra-Community delivery within the EU, we can issue a net invoice. ►►►What are the payment options? Prepayment or cash on collection in person. ►►►Why buy from us? We are professionals for this Fronius welding machine series and always stock 60–80 units – exclusively Fronius, no other brands! We know these machines inside out and never sell anything we aren't fully familiar with.

Stanje: kot nova (razstavni stroj), ►►► FRONIUS TPS 3200 SET OFFER €3,290 net incl. BINZEL TORCH PACKAGE UP/DOWN or Fronius AW torch package with display on torch incl. conversion of connections (+€500) ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULSE SYNERGIC) ➤ Fronius FK 4000 FC Cooler – Standard with Flow Control, Thermocontrol, and coolant filter. The cooler switches off in the event of a cooling failure or overheating to protect the torch package. These functions usually cost around 400 € extra at Fronius. ➤ Fronius VR 7000 Wire Feeder Case – Compact and practical - in our opinion the most useful feeder case - the wire is safely stored in the closed case. ➤ Fronius Long Intermediate Hose Package – each unit is supplied with a 5-metre connection hose package between the power source and the wire feeder for greater flexibility and improved handling. Take the wire feeder with you to hard-to-reach workplaces! The connection hose is neatly mounted on a hook at the side of the unit. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage regulation on the torch. ➤ Ground cable 3-4m ➤ New pressure regulator from Messer ➤ New basket spool adapter for large wire spools Ijdpfxswbills Ah Asik With this unit, almost all materials can be welded, including aluminium, steel and stainless (V2A). It is equipped with pulse wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in panel beating. Further options are available at extra charge E.g. Fronius Job Master torch package (display on torch) + EUR 450.00 First 10 buyers of a unit receive an extra -> second torch package free of charge Currently 30+ ⭐TPS 3200 SET⭐ in stock ----- Debsum Rw Dokh Hufpokk IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Vienna, 1230 Austria! ✔ Insured pallet shipping no problem! ✔ We are also available via Whatsapp and Viber. ✅QUESTIONS✅QUESTIONS✅QUESTIONS✅QUESTIONS: ✅QUESTIONS✅QUESTIONS✅QUESTIONS✅ ►►►What condition are the machines in? For explanation: we buy as-new used machines, completely disassemble and check them, replace worn parts if necessary, and only after successful test-welding do we release them for sale. "All" machines are clean, no burn holes on the displays, and without numerous burn marks or dents! You are buying an item that is ⭐worth seeing and doesn't look completely worn out! ►►►Will we receive an invoice with our purchase? Yes, you will receive a proper invoice. If you have a valid VAT ID, and meet the requirements for Intra-Community Delivery within the EU, we can issue a net invoice. ►►►What are the payment options? Advance payment or cash upon personal collection ►►►Why buy from us? We are professionals for this Fronius welding machine series and always have 60-80 machines in stock – only Fronius, no other brands! We know these machines inside out and don’t sell anything we're not familiar with.

Stanje: skoraj kot novo (rabljeno), FRONIUS TPS 4000 CMT AUSTRIA * We offer these units in a wide variety of configurations and always have several sets in stock. TPS / CMT / HAND / ROBOT — all available immediately! Example images of the item. Various CMT torch packages available — UNIVERSAL or HOLLOW SHAFT for robots. Numerous spare parts in stock — simply write us a short email, call, or contact via WhatsApp. The prices indicated are all starting from ... euros. Exact prices/offers are created individually based on the unit configuration. SCOPE OF DELIVERY: .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) .) Fronius wire feed unit VR 1550 CMT or VR 7000 CMT Iedpfehpzvwjx Ah Asik .) Fronius intermediate hose package .) Fronius trolley (optional) or base console .) Fronius torch package Robacta CMT version, depending on availability .) Fronius RCU 5000i remote control or standard cartridge (standard control) .) Harris pressure regulator, new and in original packaging .) Ground cable 4m 50mm² Interfaces available for an additional charge -- > Profibus approx. 800 EUR, Interbus 500 EUR, Devicenet approx. 800 EUR ... Also reachable via WhatsApp and Viber Stock location: Vienna 1230 (Austria) Shipping on pallet available for a surcharge: Austria approx. 180 EUR Germany approx. 230 EUR Europe on request All prices are starting prices. You can configure the units to your needs: Robot or manual unit. Long or short connection hose package. Various torch packages available. Synchropulse. 270, 400, or 500 amp units in stock. CMT version available as manual or robot version. Best to call us — we'll discuss your application area and give you an initial price estimate.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, vrsta hlajenja: voda, FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Intermediate Hose Package Standard from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator With this unit, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It is equipped with touch wire programs and is also suitable for MIG brazing (CuSi), which is frequently used in sheet metal working. Additional options and applications: This TPS series can easily be connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, which allows you to create and import custom characteristics to further extend the TPS unit's functions. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Vienna 1230, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ Isdpfowbh Ifox Ah Aoik ►►►What is the condition of the unit? For your information: we purchase as-new used devices, disassemble, thoroughly inspect, replace any necessary wear parts, and only after a successful test weld do we release them for sale. "All" units are clean, with no burn marks on the displays or numerous burn holes or dents over the machine! You are purchasing an item from us that is presentable and does not look completely worn out! ►►►Do we receive an invoice when buying from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment methods are available? Prepayment or cash on personal collection ►►►Is insured shipping possible? Yes, we are happy to ship the purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately cannot offer a warranty. Of course, the devices can be tested and paid in cash on site. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these systems inside out and do not sell anything we are not familiar with.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, FRONIUS TPS 4000 ROBOTIC SET Iodpfowbi E Sex Ah Ajik - Fronius power source (TPS 4000) - Fronius cooling unit (FK 4000) - Fronius wire feeder - Fronius intermediate hose package - Fronius transport cart - Fronius hose package - Fronius RCU 5000i - Interface = INTERBUS RUGGED LINE (Optional available: Profibus + €800 or Devicenet + €1,400; other interfaces on request) List price from the manufacturer: approx. €14,000 net Our price: €5,990 net – VAT deductible – dealer invoice provided. We always have several units in stock in various configurations. We are happy to respond to your inquiries. The prices quoted start from ... Euro. Prices/offers are created individually depending on device configuration. Sample images of devices. Stocked in Vienna 1230 (Vienna) Shipment on pallet possible for an additional charge: Austria approx. €180 Germany approx. €210 Europe on request

Stanje: kot nova (razstavni stroj), FRONIUS TPS 5000 ✅ Scope of Delivery: ➤ Fronius TPS 5000 Power Source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius Wire Feed Case VR 4000 ➤ Fronius Standard Interconnecting Hose Package from 1.5m ➤ Fronius Trolley ➤ Fronius Hose Package ➤ Ground Cable 3-4m ➤ Pressure Regulator This unit allows you to weld almost all materials, including aluminium, steel, and stainless steel (V2A). It includes filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Additional options and possible applications: Iedswbknbjpfx Ah Aoik This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. Optionally, we offer the RCU 5000i control panel, enabling you to create and upload characteristic curves to further broaden the TPS device's functionalities. ----- AVAILABLE IMMEDIATELY PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ ✅Questions?✅Questions?✅Questions?✅ Questions: ✅Questions?✅Questions?✅ Questions✅ ►►►What is the condition of the machine? To clarify: We purchase as-new used devices, disassemble and inspect everything, replace wear parts as necessary, and only after successful test welding do we approve them for sale. "All" machines are clean, with no burn holes in displays and without numerous burn marks or dents on the equipment! With us, you're buying an item that is in good visual condition and not worn out! ►►►Will we receive an invoice with our purchase? Yes, we provide a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community supply within the EU, we can issue a net invoice. ►►►What payment options are available? Advance payment or cash on personal collection. ►►►Is insured shipping available? Yes, we are happy to send your purchased set well packaged and insured on a Euro pallet. ►►►Is a warranty included? We sell these machines at a third of the new price and unfortunately cannot offer a warranty. However, you are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are specialists in this Fronius welding machine series and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out, and only sell what we fully understand.

Stanje: kot nova (razstavni stroj), FRONIUS TPS 2700 with FK 4000 (SYNCHROPULS 270A UNIT) Alu Edition ✅ Scope of delivery: ➤ Fronius TPS 2700 power source (270A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 water cooling ➤ Fronius torch package with display on the torch (arc, amperage, jobs etc. adjustable directly from the torch) ➤ Fronius trolley ➤ Ground cable 3-4m ➤ Brand new Messer pressure regulator ➤ Gas hose Iodpjwbitvefx Ah Aeik ►►► Perfect for aluminium The Fronius TPS 2700 Alu Edition is especially suited for aluminium welding. Precise welding technology – user-friendly operation ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection possible in Austria, Vienna 1230! ✔ Insured shipping on pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►►What condition are the units in? To clarify: We purchase used devices in like-new condition, disassemble them, check everything, replace wear parts where necessary, and only after a successful test weld do we release the units for sale. "All" devices are clean and have neither burn holes in the displays nor numerous burn marks or dents scattered across the device! With us you buy an item that is also ⭐worth seeing and doesn’t look worn out! ►►►Do we receive an invoice when buying from you? Yes, with us you get a proper invoice. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are there? Prepayment or cash on collection in person ►►►Is insured shipping possible? Yes, we are happy to send you the purchased set well packed and insured on an Euro-pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately have no possibility to provide a warranty. However, the units can be tested and paid for in cash on site. ►►►Why buy from us? We are specialists for this Fronius welding machine series and always have 60–80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we are not familiar with.

Stanje: kot nova (razstavni stroj), Fronius TPS 2700 Pulse Unit Ready to Weld ---> Scope of delivery: ➤ Fronius TPS 2700 Power Source (270A TRANS PULS SYNERGIC) ➤ Fronius torch package with display on the torch (arc, amperage jobs, etc. directly adjustable on the torch) ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ Gas hose ➤ 15kg spool adapter ►►► Perfect for mobile use This unit is ideal for quick and mobile applications. Quickly loaded into a vehicle and easy to take anywhere—without any compromise in welding quality. Naturally also suitable for stationary use. Questions: ----- How old is the machine? Our customers typically decommission their units after 3-5 years; sometimes more, sometimes less. What is the condition of the device, and does it work flawlessly? Yes! Everything works perfectly! All our devices are dismantled, cleaned, worn parts replaced, reassembled, and tested. The units are clean—none look completely worn out! Great condition! Only minimal signs of use. All photos are original images of our machines. Sample images. None of our units have torches with burn holes in the display. Iodpfxjvl D Idj Ah Aeik Can I negotiate the price with you? If you purchase several units, we can certainly discuss the price. Is shipping possible? Yes, shipping is possible. The unit will be packed securely on a pallet and shipped insured via our forwarding agent. Can I view the equipment somewhere? We are an online dealer, but customers can arrange to pick up a unit in person and, of course, test it before payment. We do not have fixed opening hours—everything is by appointment. Every device is assembled according to customer requirements and delivered after receipt of payment; this is our standard procedure. Do you offer a warranty? No, we do not offer a warranty. We sell used, as-new, affordable professional welding equipment, typically for 1/4 to 1/2 of the new price. For the difference to a new unit, you could purchase two more from us or use the savings to maintain this or several machines for many years. For example, the Fronius TPS 2700, as featured in this listing, costs about €8,500 new. We offer it for less than 1/3 of the new price. All prices are starting prices; you can configure the units with us. Robot device or manual device. Long or short interconnection package. Wide range of torch packages available. Synchropulse. 270, 400, or 500 amp units in stock. CMT version available as manual or robot version. Best to call us, discuss your application area, and we will provide an initial price estimate.

Leto izdelave: 2019, Stanje: kot nova (razstavni stroj),

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 29169319, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vrsta hlajenja: voda, napetost odprtega kroga: 73 V, varilni tok pri 60% delovnega cikla: 360 A, varilni tok pri 100% delovnem ciklu: 320 A, vrsta zaščite (IP koda): IP23, varilni tok (maks.): 400 A, vhodna frekvenca: 50 Hz, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, TPS 400i Pulse Profesionalni varilni stroj Zelo dobro ohranjen. Ni bil v stalni uporabi! Servisiran in preverjen neposredno pri Froniusu. Zadnja posodobitev programske opreme 2023. Komplet cevi za žico 1,2 mm (priloženi so tudi deli za žico 1 mm). Ijdpfx Asxzcyyjh Aeik Prva uporaba leta 2019.

Stanje: rabljeno, Leto izdelave: 2019, Tehnične podrobnosti: Iodsu Nwhiepfx Ah Asik Napetost: U1: 400V V Napetost v prostem teku: 70 V Teža stroja cca: 100 / naprava kg Dimenzije stroja: cca. 0,85 x 0,37 x 1,25 na napravo m Na voljo 4 Fronius TransPuls varilni aparati Za industrijsko uporabo, npr. za uporabo z robotom. Področja uporabe: varilni proces "CMT", za vse MIG/MAG varilne naloge mobilen, 4 kolesa / 2x vrtljiva dodalnik žice tip: VR 7000-CMT: hitrost podajanja žice 0,5–22 m/min; možen premer žice 0,8–1,2 mm daljinsko upravljanje RCU5000i univoSD 1-metrski vmesni paket cevi Voziček Zaščitni razred IP 23 Hladilni način AF Upravljanje preko zaslona RCU 5000i i.D.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4,075,231, Fronius TPS 400i (serijska št.: 33732247). Po uvedbi ni bil uporabljen v serijski proizvodnji. Popolnoma funkcionalen in kot nov. Iisdow Upnfjpfx Ah Ask

Stanje: kot nova (razstavni stroj), JUNE OFFER. THROUGHOUT JUNE -10% on all welding machines We offer welding machines in a wide range of configurations and always have multiple sets in stock. CMT / ROBOT / CMT torch packages, UNIVERSAL or HOLLOW SHAFT robots. Everything available from stock and ready for immediate delivery! Don't hesitate to inquire about your personalized configuration! We also have a large selection of spare parts %%% -30% -50% -70% in stock—just send a short email / call / WhatsApp. CMT UNITS at 1/3 of the original price! - 66% DISCOUNT ALL MACHINES CAN BE INSPECTED AND PURCHASED IMMEDIATELY IN VIENNA WITHOUT WAITING TIME! Iijdpfx Ajhzhynoh Ajk Quoted prices start from ... Euros. Prices/offers will be made individually based on chosen machine configuration. Equipment examples: - Fronius Power Source (TPS 4000 CMT) - Fronius Cooling Unit (FK 4000) - Fronius VR CMT Wire Feeder - Fronius Intermediate Torch Package - Fronius Carriage - Fronius CMT Robot Torch Package - Fronius RCU 5000i Sample images of the listed items. Please see the numerous YouTube videos on CMT for additional details! We are also reachable via WhatsApp and Viber Stocked in Vienna 1230 (Vienna) Palletized shipping available at extra cost: Austria approx. 180 euros Germany approx. 230 euros Europe on request All prices are starting prices—you can configure the machines with us. Robotic or manual units. Long or short connection torch packages. Various torch packages to choose from. Synchropulse options. 270, 400, or 500 amp units in stock. CMT versions available as manual or robot units. The best option is to call us—we’ll discuss your requirements and provide you with an initial pricing estimate.

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0518018, Offer 24600 Iodsvncfmopfx Ah Aoik Technical Specifications: - Suitable for welding steel, aluminium, special metals, CrNi, etc. - Welding current: 450 A 60% duty cycle - 360 A 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control unit FRONIUS - FRONIUS water cooling unit - Separate wire feed case - Interconnecting cable set device – wire feed case 14 m - 4-roll wire feed, steplessly adjustable - MIG/MAG welding torch package, water-cooled, approx. 4 m - Earth cable - Pressure reducer - Mobile undercarriage - Power supply: 400 V / 6.6 A / 8.7 kVA - Space requirement: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4,075,231, Varilna enota Fronius TPS 400i. Po implementaciji ni bila uporabljena v serijski proizvodnji. Skoraj nova. Iiedpfxjw Upnre Ah Ajk

Stanje: kot nova (razstavni stroj),

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0618012, Technical data: - Suitable for welding steel, aluminum, special metals, CrNi, etc. - Welding current: 450 A at 60% duty cycle Iijdpfevncubsx Ah Ajk - 360 A at 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control unit FRONIUS - FRONIUS water cooling unit - Separate wire feeder case - Intermediate cable set, device to wire feeder case: 1 m - 4-roller wire feed, steplessly adjustable - MIG/MAG torch, water-cooled, approx. 4 m - Ground cable - Pressure regulator - Mobile chassis - Connection requirements: 400 V / 6.6 A / 8.7 kVA - Footprint approx.: W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stanje: kot nova (razstavni stroj), Fronius TPS 4000 CMT ✅ Scope of supply: ➤ Fronius TPS 4000 CMT power source Iedpfx Aewbixreh Aoik ➤ Fronius FK 4000 ➤ Fronius VR 7000 CMT wire feeder ➤ Fronius Robacta CMT torch set or manual CMT torch package ➤ Fronius intermediate hose package ~1.5m ➤ Fronius RCU 5000i ➤ Fronius Interface Interbus Rugged Line ➤ Ground cable 3–4m ➤ New pressure regulator by Messer All prices are stated from ... Euro. The prices/offers are created individually based on the device configuration. The CMT technology (Cold Metal Transfer) is especially renowned for its high precision and flexibility when welding thin materials and sensitive components. Unlike conventional MIG/MAG welding processes, CMT uses a controlled, pulsed wire feed, in which the welding wire is transferred with high accuracy into the weld pool. This minimizes spatter, enables very precise heat input control, and reduces distortion and discoloration of the material. We always have several units in different configurations in stock. Please inquire for a customized configuration/additional options. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing is possible in Austria, Vienna 1230! ✔ Insured pallet shipping is not a problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the devices? For clarification: we purchase nearly new used equipment, fully disassemble and inspect them, replace any wear parts as necessary, and only release them for sale after successful test welding. All units are clean and feature neither burn marks on the displays nor numerous burn holes or dents distributed on the device! You are buying an item from us that is also ⭐ worth seeing and not just completely used up! ►►►Do we receive an invoice upon purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, and if the requirements are met for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash upon personal collection. ►►►Is insured shipping possible? Yes, we are happy to ship your purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third of the new price and unfortunately cannot offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts for this Fronius welding machine series and always stock 60-80 units – exclusively Fronius, no other manufacturers! We know these machines inside out and do not sell anything we are unfamiliar with.

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0618019, Offer 24589 Technical specifications: - Suitable for welding steel, aluminum, special metals, CrNi, etc. - Welding current: 450 A at 60% duty cycle - 360 A at 100% duty cycle - Adjustable welding current: 3 A – 450 A - FRONIUS synergic control system - FRONIUS water cooling unit - Separate wire feed unit - Intermediate hose package (machine – wire feed unit): approx. 14 m - 4-roll continuously adjustable wire feed - MIG/MAG water-cooled torch package: approx. 4 m - Ground cable - Pressure regulator - Mobile undercarriage - Connection: 400 V / 6.6 A / 8.7 kVA Isdpfxsvnb Tpe Ah Aoik - Space requirements: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stanje: novo, številka stroja/vozila: 4,047,234,000, Several Fronius Robacta torch packages with a length of 1.5m available. 4,047,234,000 Wear parts are also available. Iisdpswbkk Ajfx Ah Aek Approx. 30 torch packages in stock. Original price approx. €1,300 each. Price per piece: €349 If you need a larger quantity, I can offer you a good deal.

Stanje: dober (rabljeno), Leto izdelave: 1998, številka stroja/vozila: 0625004, Listing 24603 Technical Specifications: - Suitable for welding steel, aluminum, special metals, Cr Ni (chrome-nickel alloys), etc. - Welding current: 450 A at 60% duty cycle; 360 A at 100% duty cycle - Welding current adjustable from 3 A to 450 A - Synergic control system by FRONIUS - FRONIUS water cooling unit - Separate wire feed case - Intermediate connection set (machine – wire feed case): 10 m Iodpfx Aovncqveh Aeik - 4-roll continuously adjustable wire feed - MIG/MAG torch package, water-cooled, approx. 4 m - Ground cable - Pressure regulator - Mobile chassis - Power supply: 400 V / 6.6 A / 8.7 kVA - Space requirements: approx. W 650 x H 900 + 450 x D 1100 mm - Weight: approx. 200 kg

Stanje: dober (rabljeno), Fronius interface Iodpfx Ahswbkf To Aoik

Stanje: novo,

Stanje: kot nova (razstavni stroj), ⭐ FRONIUS TPS 4000 ⭐ Fully Equipped Device Description / Scope of Delivery: Fronius TPS 4000 unit with full equipment – top specification! - Power source Pulse 400 Amps - FK 4000 FC cooling unit with optional filter, including flow control (==> if no water is circulating, the unit automatically shuts off to protect the torch hose assembly). - VR 4000 wire feeder with optional rollers underneath + extended interconnecting hose package + metal feed rollers – only premium components used. - Fronius AW5000 torch package with Job Master function on the torch (==> Display on the torch / adjustable amps, job selection, wire feed, and arc control directly on the torch) Photo = scope of delivery. All prices stated are starting prices. Pricing is tailored individually according to configuration requirements. Original price approx. €15,000 (net), offered at 1/3 of the new price. Not comparable to Transsteel scrap. Iiedpfevlwh Dex Ah Ajk Why buy from us and not somebody else? - We are professionals when it comes to this series of Fronius welding equipment. We always have around 60-80 units in stock. Only these Fronius models – no other brands! - We don’t just pass devices through – all units are dismantled, checked, wear parts replaced, and only once everything works flawlessly do we sell the equipment. - All our devices come with the popular Fronius torches. NO €100 "E*b*a*y" torch, but REAL QUALITY! Fronius torches cost between €650 and €900 net, depending on the configuration! - All our units are clean and have no burn marks on the displays or numerous burn holes / dents on the casing! You get from us an item that is presentable and not completely worn out! - As our customer, you benefit from affordable spare parts and support if needed. - You receive a proper invoice with VAT disclosed. All units can be viewed, paid for, and collected by appointment at our main warehouse in Vienna! Insured palletized shipping is, of course, possible! All prices are starting prices – you can customize your equipment with us. Robot device or manual unit. Long or short interconnecting hose package. Various hose packages available. Synchropulse. 270, 400, or 500 Amp units in stock. CMT version available as manual or robot model. It’s best to call us so we can discuss your application and provide you with an initial price estimate.