FRONIUS UR10 Robot e-Series
FRONIUS UR10 Roboter e-Series

Name: FRONIUS UR10 Roboter e-Series
Brand: FRONIUS
Availability: InStock

Leto izdelave

2022

Stanje

Rabljeno

Lokacija

Nemčija

FRONIUS UR10 Robot e-Series FRONIUS UR10 Roboter e-Series

Prikaži karto

Podatki o stroju

Oznaka stroja:: FRONIUS UR10 Robot e-Series

Proizvajalec:: FRONIUS

Model:: UR10 Roboter e-Series

Leto izdelave:: 2022

Stanje:: pripravljen za uporabo (rabljen)

Cena in lokacija

Lokacija:: , Nemčija

Pokliči

Tehnične podrobnosti

Skupna širina:: 3.500 mm

Največja dolžina izdelka:: 5.000 mm

Število osi:: 6

Podrobnosti ponudbe

ID oglasa:: A20702000

Referenčna številka:: DK-ROB-FRO-2022-00001

Posodobitev:: nazadnje dne 23.04.2026

Opis

This 6-axis FRONIUS UR10 robot from the e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional features include a 4000 mm linear axis, a rotary/tilting axis with a load capacity of 250 kg, and a torch holder. Ideal for advanced welding applications. Contact us for further information about this machine.

Additional equipment

• Robot controller and teach pendant
• Bumper (remote protection) and protective film for teach pendant
• Multifunction flange for magnetic attachment to the torch neck
• Balancer system for hose management
• weldControl URCap software
• TOUCHSENSE CAP – part location detection with welding wire or gas nozzle
• CAP component OFFSET – for shifting and copying programs
• Operating controls: Quick start buttons (Start / Stop / Reset / Emergency Stop, speed potentiometer, selector switch for 2-station operation)
• slideONE: 4000 mm linear axis for Universal Robots with an effective robot stroke of 1600 mm
• RotateTWO 250: external rotary/tilting axis for the robot with a load capacity of 250 kg, including standard product with octagonal plate (16 mm pitch-hole pattern) and table SW 600x50
• Safety technology: 1 set of laser light barriers with steel post and 1000 mm light curtain (Safety PLC for 2-station operation)

Machine benefits

Technical advantages

• Maximum reach: 1300 mm
• Welding technology: holdONE = torch holder with integrated Freedrive button, Fronius CMT torch
• Ergonomic holder for the teach pendant
• Supports all welding positions and ensures accessibility
• Floor stand for freestanding axis on two columns, incl. leveling plates for mounting
• The tools and 3 cabinets shown in the pictures are included in the scope of delivery.

Dedpfxjx D E Hus Aplskl
Additional information
Machine still under power

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2017

1.387 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 631 7... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Stroj za oblikovanje in obrezovanje OMERA R4 / 12

Babberich

908 km

Stroj za oblikovanje in obrezovanje
OMERAR4 / 12

Pokliči

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dkjdpfx Askvnumeplol Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Poglej podrobnosti

Mali oglas

Wiesbaden

667 km

Navpična tračna žaga
MössnerSSF 1050

Pokliči

Leto izdelave: 1984, stanje: rabljeno, številka stroja/vozila: 25 948, Outreach: 485 / 1050 mm Roller diameter: 500 mm Dedpeb N Eh Hefx Apljkl Passage height: 380 mm Table size: Work table 780 x 800 mm Saw band length: over 2 running wheels 3920 - 4050 mm Max. saw band width: 20 mm Band speed: 15 - 940 m/min Drive motor: 380 V, 4 kW Space requirement: 950 x 2130 x 2100 mm Weight: 1740 kg

Poglej podrobnosti

Mali oglas

Dortmund

815 km

Gredna peč
VEISCO_EB

Pokliči

Stanje: novo, Jaškovna peč, proizvajalec VEI Dkjdpfxjg R Snho Apljl Tip: SCO_EB koristna višina: 1200 mm koristni premer: 1400 mm zunanji premer: 2200 mm zunanja višina (brez pokrova): 1650 mm zunanja višina (z vklj. pokrovom): 2600 mm električno ogrevana: 64,5 kW cirkulator: 5,5 kW trofazni priključek: 400 V, 50 Hz temperatura: max. 750°C

Poglej podrobnosti

Mali oglas

Hövelhof

780 km

Hidravlična stiskalnica
HYDRAPHKPS8000

3.950 €

Fiksna cena plus DDV

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, -KOM 1002- Offered here is a press from HYDRAP, model HKPS8000. Technical data: Type: HKPS8000 Year of manufacture: 1975 Usable stroke: 200 mm Throat depth: 250 mm (central) Table size: 320 x 320 mm Installation height: approx. 345 mm Voltage: 380V Permissible load: 80,000 N Drive type: HYDR (hydraulic) Djdpfx Aeg Ufvbjplekl Motor power: 1.5 kW Oil capacity: 60 l Oil viscosity: 3°E You will receive a proper invoice with stated VAT upon purchase. We have many other interesting items for sale as well. Feel free to check out all our listings. If you are interested or have any questions, please feel free to contact us via the messaging function!

Poglej podrobnosti

Mali oglas

Laserski sistem za rezanje tekstila SEI Laser Mercury 2030 Conveyor 3

Nemčija

650 km

Laserski sistem za rezanje tekstila
SEI LaserMercury 2030 Conveyor 3

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Usable working area: 2000x3000mm, Z-axis: 50mm, positional repeatability across the entire area: ±0.05mm, X/Y/Z addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y system with linear motors, Z-axis with servomotor, laser safety class: class 1 with cover hood, base frame: robust welded steel structure, axis system: X/Y/Z axes of motion, drive: linear motor drive, contactless and low-wear, unloading system: extension 2000mm, conveyor: aluminum slat conveyor with servo motor drive, pressure roller: for material feed, laser source: 300W CO2 laser, sealed and maintenance-free, cooling: closed water circuit with water chiller for the laser, cutting head: 5-inch lens, cutting nozzle, cutting gas supply, extraction: extraction tray for small parts and dust, software: CAM control software ICARO, motorized brush width: 2000mm, SEI PC console: PC not included, to be provided by customer, extraction unit: 2x extraction blowers at 5.5kW each, scanner: manual barcode scanner, unwinding device: for material rolls with unwinding bar, unwinding system: connection available. The system was only set up and accepted, serial operation has not taken place. On-site inspection possible, documentation available. Djdpfswbuzfex Aplskl

Poglej podrobnosti

Mali oglas

Rotacijska miza, varjenje REINARTZ (MRN Neuss) 1000 RY

Wiesbaden

667 km

Rotacijska miza, varjenje
REINARTZ (MRN Neuss)1000 RY

Pokliči

Leto izdelave: 1960, stanje: dober (rabljeno), številka stroja/vozila: 970015, Load capacity with faceplate in horizontal position: 10 t Load capacity with faceplate in vertical position and center of gravity at 300 mm: 10 t Load capacity with faceplate in vertical position and center of gravity at 830 mm: 5.5 t Faceplate dimensions: 1500 x 1500 mm Faceplate speed, hydraulically infinitely variable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Dkjdpfxjcblc Ss Apljl Swivel time for full swivel range upwards: 140 s Swivel time for full swivel range downwards: 120 s Hydraulic drive: 380 V Height of swivel axis above floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Counterweight weight: 2.3 t

Poglej podrobnosti

Mali oglas

Balaguer

1.234 km

Varilni stroj
KEMPPIPRO 3000

Pokliči

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Multifunkcijski varilni stroj (MIG, TIG, elektrode) Znamka: Kemppi Model: Pro 3000 / Promig 500 Stroj s hlajenjem z vodo in hladilnikom Kemppi PRO Cool 10. Enota za TIG/elektro varjenje Kemppi PRO TIG 410 - Panel Kemppi TL - Funkcije za TIG varjenje: predplin, poplin, oblok, visoka frekvenca TIG generator Kemppi Pro 3000 Enota za MIG/žično varjenje Kemppi PRO MIG 500 - Delovni cikel: 500A – 60% - Kontrolna plošča Kemppi ML SYNERGIC - 4 pogonski valji - Impulzni obločni tok s Synergic panelom - Posebne funkcije za varjenje jekla, nerjavnega jekla in aluminija Vključuje: - TIG varilna pištola - MIG varilna pištola - Masa - Regulator za plin Djdpfx Aexf Hv Hepljkl

Poglej podrobnosti

Mali oglas

Laserski stroj za rezanje BODOR T230E 6kW + T-Loader

Niederlangen

930 km

Laserski stroj za rezanje
BODORT230E 6kW + T-Loader

Pokliči

Stanje: novo, Leto izdelave: 2026, Table length / Raw material length: 6500 mm Table width / Maximum pipe diameter: 230 mm Torch heads: 1 Control: CNC Workpiece weight: 300 kg Traverse speed: 91 m/min Weight: 5750 kg Installation dimensions: approx. 12900 x 2370 x 2650 mm Tube laser with T-Loader Configuration: 1. Bodor Power laser source 6 kW Dkjdowh Uldspfx Aplel 2. Bodor Genius premium laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Pneumatic chuck 5. Adaptive clamping force adjustment 6. Follow-servo blanking clamp 7. Composite support roller 8. Active collision avoidance 9. Automatic tube inspection 10. Automatic tube edge detection and positioning 11. Automatic cutting gas adjustment 12. Laser cutting process database 13. Air-saving continuous nozzle 14. Intelligent maintenance reminder 15. WIFI internet connection 16. Water chiller 17. Extraction system 18. Wear parts kit 19. Auxiliary feeding unit T-Loader: - One-click setup - Material shortage alarm - Automatic loading - Scratch-resistant tube handling - Host safety interlock - Tube size range: Round tube 20 - 220 mm Square tube 20 - 220 mm Rectangular tube: side length 20 mm up to 220 mm - Maximum pipe weight: 300 kg - Tube loading length range: 4500 mm - 6500 mm - Maximum loading weight: 1800 kg CUTTING CAPACITY: Mild steel: 16 mm Stainless steel: 12 mm Aluminum: 10 mm WALL THICKNESS MILD STEEL* (mm): If Ø < 50 mm: wall thickness = 1.2 mm If Ø = 50 mm: wall thickness = 2.5% × diameter Max. finished part length: 4500 mm OPTIONAL: LANTEK FLEX3D TUBES PLUS

Poglej podrobnosti

Mali oglas

Horizontalni stroj za upogibanje SCHÄFER 4-Walzen Rundbiegemaschine

Ennepetal

801 km

Horizontalni stroj za upogibanje
SCHÄFER4-Walzen Rundbiegemaschine

Pokliči

Stanje: rabljeno, Leto izdelave: 1987, Pressure / t Stroke / mm Table size / mm Machine weight approx. 65,000 kg Manufacturer: Schäfer Type: SVRM 4-Roller Plate Bending Machine: Year of manufacture: 1986 Working width: 3,000 mm Smallest pipe diameter with 600 mm roller: Ø 720 mm Dodpfxeuddcae Aplekl Smallest pipe diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on material): 50 mm Material SA-738 B working width: 2,500 mm Material SA-738 B material thickness: 35 mm Cone Bending: For cone bending, all rollers except the upper roller can be set at an angle. The roller positions can be read on indicator instruments. For semi-automatic or fully automatic operation, the roller bearing blocks are equipped with scale bars and cam slides for limit switch actuation. This allows the rollers to repeatedly move into the same preset position, ensuring very high uniformity of the bent sections.

Poglej podrobnosti

Mali oglas

Drobilec lesa Izpraznitveni trak L Transporter die magnetprofis 2021102613

Dinkelscherben

409 km

Drobilec lesa Izpraznitveni trak L Transporter
die magnetprofis2021102613

Pokliči

Leto izdelave: 2021, stanje: novo, številka stroja/vozila: 2021102613, Aluminum angled conveyor belt with supporting frame Conveyor length: 2000 mm straight + 2200 mm inclined Incline angle at the bend: 45° Discharge height: approx. 1800 mm Height of the horizontal section: 200 mm (top edge) PU conveyor belt Conveyor belt type: EM 9/2 0+05 PU petrol matt Dkodpfxjh Eld Ee Aplsl Belt width: 500 mm 21 pcs. T30 cleats welded on — pitch 310 mm * Antistatic due to threads woven into the running side Endless welded with stepped finger joint 40 mm wave edge, high-frequency welded on both sides * Edge-free zone on both sides for belt tracking in the incline Full-surface support sheet Drive: Motor approx. 1.1 kW Belt speed approx. 0.4 m/sec * Optional control via frequency inverter Connection 220/400V, 50Hz, protection class IP54

Poglej podrobnosti

Oglašujte tukaj