Varilni roboti

KUKA / FRONIUS KR20 R3100-2 KRC4, TPS 400i, KP3-V2H

Leto izdelave: 2021, stanje: novo, številka stroja/vozila: 2021102613, Aluminum angled conveyor belt with supporting frame Conveyor length: 2000 mm straight + 2200 mm inclined Incline angle at the bend: 45° Discharge height: approx. 1800 mm Height of the horizontal section: 200 mm (top edge) PU conveyor belt Conveyor belt type: EM 9/2 0+05 PU petrol matt Belt width: 500 mm 21 pcs. T30 cleats welded on — pitch 310 mm * Antistatic due to threads woven into the running side Endless welded with stepped finger joint Bjdpfx Aoh Eld Esgtolg 40 mm wave edge, high-frequency welded on both sides * Edge-free zone on both sides for belt tracking in the incline Full-surface support sheet Drive: Motor approx. 1.1 kW Belt speed approx. 0.4 m/sec * Optional control via frequency inverter Connection 220/400V, 50Hz, protection class IP54

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, skupna širina: 3.500 mm, največja dolžina izdelka: 5.000 mm, število osi: 6, This 6-axis FRONIUS UR10 robot from the e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional features include a 4000 mm linear axis, a rotary/tilting axis with a load capacity of 250 kg, and a torch holder. Ideal for advanced welding applications. Contact us for further information about this machine. Additional equipment • Robot controller and teach pendant • Bumper (remote protection) and protective film for teach pendant • Multifunction flange for magnetic attachment to the torch neck • Balancer system for hose management • weldControl URCap software • TOUCHSENSE CAP – part location detection with welding wire or gas nozzle • CAP component OFFSET – for shifting and copying programs • Operating controls: Quick start buttons (Start / Stop / Reset / Emergency Stop, speed potentiometer, selector switch for 2-station operation) • slideONE: 4000 mm linear axis for Universal Robots with an effective robot stroke of 1600 mm • RotateTWO 250: external rotary/tilting axis for the robot with a load capacity of 250 kg, including standard product with octagonal plate (16 mm pitch-hole pattern) and table SW 600x50 • Safety technology: 1 set of laser light barriers with steel post and 1000 mm light curtain (Safety PLC for 2-station operation) Machine benefits Bsdox D E Huspfx Agtslg Technical advantages • Maximum reach: 1300 mm • Welding technology: holdONE = torch holder with integrated Freedrive button, Fronius CMT torch • Ergonomic holder for the teach pendant • Supports all welding positions and ensures accessibility • Floor stand for freestanding axis on two columns, incl. leveling plates for mounting • The tools and 3 cabinets shown in the pictures are included in the scope of delivery. Additional information Machine still under power

Stanje: dober (rabljeno), Leto izdelave: 2007, Einwellenzerkleinerer Weima WLK10 Hauptantrieb 55 kW Rotorlänge 100 cm Blodpfx Agotpcpnjteg Die Maschine ist zu 100 % funktionsfähig.

Leto izdelave: 2007, stanje: rabljeno, Linia spawalnicza MOTOMAN jest w bardzo dobrym stanie technicznym i przepracowała jedynie około 100 godzin roboczych. Tego typu zestaw najczęściej wykorzystywany jest przy produkcji maszyn rolniczych – przyczep, ram, osi. Wyposażenie wykonane na zamówienie lub skonfigurowane z elementów standardowych (z wyłączeniem portalu). Stacja automatycznego spawania obejmuje: Stacja – HD Gantry HP6/EA1400N Pozycjoner – HSB-10000SX Jednostka sterująca – NX 100 Spawanie: Spawanie łukowe. Spawanie MIG/MAG. Możliwość spawania impulsowego. Używana średnica drutu: 1 – 1,2 mm. Minimalna wysokość spoiny: 3 mm. Maksymalna prędkość podawania drutu: 25 m/min. Chłodzenie uchwytu spawalniczego. Śledzenie laserowe: Wyszukiwanie spoiny przy użyciu czujników laserowych. Stosowane przy zmianie położenia spoiny. Dopuszczalne odchylenie od pozycji: 5 mm. Możliwość wydłużenia czasu spawania o 30% lub więcej (w zależności od produktu). Zafiksowanie spoiny przy min. 3 mm kropli. Pozycjonowanie: Pozycjoner – HSB-10000SX Udźwig pozycjonera: 10 000 kg Bodpfx Agjm Uc Igstjlg Dokładność pozycjonowania ramienia robota: 0,0001 mm Wymiary spawanych detali: Wysokość/szerokość – do 3000 mm (wraz z oprzyrządowaniem mocującym). Długość – do 6500 mm (wraz z oprzyrządowaniem mocującym). Maksymalna masa detalu – do 3500 kg (ograniczona udźwigiem urządzenia podnoszącego). Specyfika możliwych do spawania części: - Partie elementów sprzęgających o wysokiej precyzji. - Długie długości spoin. - Duże grubości materiału (min. 5 mm). - Sztywna konstrukcja produktu. - Gdy wymagane jest powtarzalne, wysokiej jakości połączenie. - Wysoka tolerancja na zginanie elementów. - Wysoka tolerancja wymiarowa detali. - Spawanie wewnątrz elementu – głębokość do 110 mm. W przypadku pytań chętnie udzielimy dodatkowych informacji.

Stanje: zelo dobro (rabljeno), 3D Systems We are offering you a 3D printer here. Solid-State Nd:YVO4 with third harmonic generation Wavelength: 354.7nm Nominal laser head output: 1450 mW (1000 mW at the resin surface under standard conditions) Zaphyr™ Coating System: Process: Interchangeable coater Adjustment: Self-leveling and self-correcting Production layer thickness: Minimum 0.05mm, Maximum 0.15mm ProScan™ Scanner Bljdpsnkalgsfx Agtjg Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Wide line detection, nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec Wide line detection: 25m/sec Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Environmental conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirements: Dimensions (W x D x H), unpacked: 1260mm x 2200mm x 2280mm Weight packed (without RDM): 1590kg Model: iPro 8000 Condition: used Scope of delivery: (Please see pictures) (Changes and errors in the technical data, specifications reserved!) If you have further questions, we are happy to assist you by phone.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: HFE 220-3 N080201, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 24.330 h, moč: 20 kW (27,19 KM), vhodna napetost: 400 V, upogibna sila (maks.): 2.200 t, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, nujno zaustavitev, spodnje orodje, varnostna svetlobna zapora, zaščita prstov, zgornje orodje, Idealno za kovinsko proizvodnjo. Pravilno vzdrževan, pripravljen za uporabo! Podrobnosti in ogled po telefonu. Bljdpfxjyqvato Agteg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Pressure: 40.0 t Bending length: 1600 mm Frame width: 1200 mm Frame throat: 200 mm Ram speed: 60.0 mm/sec Return speed: 80.0 mm/sec Working speed: 60.0 mm/sec Stroke: 100 mm Table height: 760 mm Table width: 150 mm Oil capacity: 130 ltr. Operating voltage: 400 Volt Control system: ESA E21 Total power requirement: 4.0 kW Weight: 3030 kg Dimensions (L x W x H): 2050 x 1800 x 2030 mm Demonstration / Ex-demo machine (!!) From our showroom (as NEW) With very low operating hours Equipment: - Compact hydraulic press brake - BERNARDO NC control, model E21 - Swiveling control panel - Electrically adjustable back gauge - Back gauge on ball screw spindles - Electrically adjustable ram depth - Front laser safety device Blodpfxoxabumj Agtog - Segmented gooseneck punch tool - Quick-change tool holder system - Universal die block - Side and rear safety guards - 2x front support arms - Mobile double foot switch (operation)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, Nachgerüstet: 2026 Numerische Steuerung: HEIDENHAIN TNC-i530 Technische Daten Bedpfxsyf Rrmj Agtelg Abmessungen Tischabmessungen: 8.500 x 2.500 mm Anzahl T-Nuten: 17 T-Nuten-Abmessungen: 22 mm Achsenverfahrwege X-Achse: 8.000 mm Y-Achse: 3.800 mm Z-Achse: 1.500 mm Vertikaler Hub (VC): 168 / 1.668 mm Abstand zwischen den Ständern: 3.100 mm Fräskopf Automatischer Index-Universal-Kopf (UAD - 0,02º) Werkzeugspannung: Hydraulisch Werkzeugaufnahme: ISO50 (DIN69871) / Zugbolzen: DIN69872 Drehzahlbereich: 6.000 U/min Spindelleistung: 30 kW Vorschübe Eilgang (X / Y,Z): 7.200 / 12.000 mm/min Gewicht und Abmessungen Maximale Tischbelastung: 35.000 kg Maschinengewicht ca.: 79.000 kg Maschinenabmessungen ca.: 22.700 x 7.660 x 6.800 mm Zubehör Schutzvorrichtung: 2 Schiebetüren mit neuer, umlaufender Drahtgitter-Sicherheitsumzäunung Automatischer Werkzeugwechsler: ATC-60 Späneförderer: 2 Längsförderer, Scharnierband-Ausführung Elektronisches Handrad: Neues HR-510 Kühlmittel: Extern und intern, Hochdruck durch die Spindel Verkaufsbedingungen Garantie: 6 Monate auf mechanische Ersatzteile Preis und Verkaufsbedingungen: Auf Anfrage Alle technischen Merkmale anzeigen

Stanje: kot nova (razstavni stroj), Fronius TPS 4000 CMT ✅ Scope of supply: ➤ Fronius TPS 4000 CMT power source ➤ Fronius FK 4000 ➤ Fronius VR 7000 CMT wire feeder ➤ Fronius Robacta CMT torch set or manual CMT torch package ➤ Fronius intermediate hose package ~1.5m ➤ Fronius RCU 5000i ➤ Fronius Interface Interbus Rugged Line ➤ Ground cable 3–4m ➤ New pressure regulator by Messer All prices are stated from ... Euro. The prices/offers are created individually based on the device configuration. The CMT technology (Cold Metal Transfer) is especially renowned for its high precision and flexibility when welding thin materials and sensitive components. Unlike conventional MIG/MAG welding processes, CMT uses a controlled, pulsed wire feed, in which the welding wire is transferred with high accuracy into the weld pool. This minimizes spatter, enables very precise heat input control, and reduces distortion and discoloration of the material. We always have several units in different configurations in stock. Please inquire for a customized configuration/additional options. ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing is possible in Austria, Vienna 1230! ✔ Insured pallet shipping is not a problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the devices? For clarification: we purchase nearly new used equipment, fully disassemble and inspect them, replace any wear parts as necessary, and only release them for sale after successful test welding. All units are clean and feature neither burn marks on the displays nor numerous burn holes or dents distributed on the device! You are buying an item from us that is also ⭐ worth seeing and not just completely used up! Bodpswbixrefx Agtjlg ►►►Do we receive an invoice upon purchase? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, and if the requirements are met for intra-community delivery within the EU, we can issue a net invoice. ►►►What payment options are available? Prepayment or cash upon personal collection. ►►►Is insured shipping possible? Yes, we are happy to ship your purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third of the new price and unfortunately cannot offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? We are experts for this Fronius welding machine series and always stock 60-80 units – exclusively Fronius, no other manufacturers! We know these machines inside out and do not sell anything we are unfamiliar with.

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, moč: 400 kW (543,85 KM), Oprema: Na voljo je tipska ploščica, We are selling our 400 kW heating boiler. We used it to supply heat to our drying chambers. As we no longer have them, the boiler is no longer needed. The scope of supply includes: - Moving floor - Registration/documentation - Boiler - Ash conveyor with container Bledoq U R Sgspfx Agtjg - Various pipework - Heating control system Price is excl. 20% VAT, ex works, excluding dismantling, loading, contract drafting, and customs clearance costs. The boiler can, of course, be inspected by appointment. Since there is no longer a heat consumer, test firing or demonstration is not possible. Due to the building design, removal of the boiler will likely only be possible via the roof. The boiler was inspected by a specialist company on June 5, 2024. It is ready for operation and fully functional.