5-osni obdelovalni center

BIESSE ROVER C

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, CNC Machining Centers Rover Multi Up M C S Working Area *: X = 3280 mm; Y = from 1580 to 1660 mm, depending on working conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece Passage *: Y = 1900 mm Axis Travel Ranges *: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. AUXILIARY VACUUM SYSTEM – 2 areas Enables clamping of workpieces using vacuum templates. Remote Control RM850 Ncodpfjy Ehrxex Aamew Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the 16-position rotary tool magazine and the 12-position side tool magazine. Tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for the machine PC. 6 ATS Workpiece Supports – 18 Module Carriers — 6 aluminum workpiece supports. Guidance of the workpiece supports via linear guides with recirculating ball carriages. Clamping on the front and rear linear guides using pneumatic cylinders. Clamping is released by a push button mounted on the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping. Vacuum modules can be rotated in 15° increments on the module carriers – an ideal solution for shaped parts. — 18 locks for module carriers without template. SA (Set-Up Assistant) Worktable for worktables up to 1550 mm. Supported manual positioning system with travel direction indicator and position indicator. — Sensors on each worktable and along the X axis of the working area. — Display of travel direction and achieved position for the carriage during the positioning phase, mounted on each worktable. The system, according to the worktable programming, suggests to the operator the movement direction of each worktable and carriage, and signals the achieved position with a green LED and beep, with a tolerance of +/- 1.5 mm. Division of the pneumatic system into 2 working areas in X Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Suction hood with 12 NC-controlled positions for electrospindle with 5 axes. Flange for preparation of a 5-axis machining unit for aggregate mounting. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions in machine bed. Rotary tool magazine with 16 positions, mounted directly on the X machining unit. Tool holder HSK F63, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm for tool holder. Hi-Tech Tool Set Complete set of tools for testing acceptance Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital devices for measuring tool length for up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter vacuum cup proposal 5-axis simultaneous Material removal simulation 12 months warranty period Location: ex stock 54634 Bitburg – immediately available –

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Delovno območje X: 6.400 mm Nodpfxswlcqvs Aamjcw Delovno območje Y: 1.500 mm Število rezkalnih vreten: 1 Glavni motor: 13 kW Maksimalna hitrost vrtenja: 24.000 obr/min Sistem za vpenjanje orodja: HSK-F63 Mesta za menjavo orodja: 8 Vertikalne vrtalne glave: 20 Horizontalna vrtala X: 4 Horizontalna vrtala Y: 4 2 vakuumski črpalki po 360 m³/h Nesting Daljinsko upravljanje Programska oprema: BIESSE WORKS Dimenzije: 11004 × 5334 mm Teža: 4900 kg

Stanje: rabljeno, številka stroja/vozila: 008480, Delovno območje os X: 4600 mm Delovno območje os Y: 1550 mm Delovna površina: z vakuumskimi konzolami Moč glavnega vretena: 18 kW Število krmiljenih osi: 5 osi Nedpfjy Edqkex Aamjcw Število vrtalnih vreten: 31 Število mest za orodje: 58

Stanje: rabljeno, številka stroja/vozila: 008338, Delovno območje os X: 4500 mm Delovno območje os Y: 1600 mm Ncsdpfsx A Tkxsx Aamjw Delovna površina: Z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 15 kW Število krmiljenih osi: 5 osi Število vrtalnih vreten: 41 Število mest za orodja: 37

Stanje: rabljeno, številka stroja/vozila: 008186, Maks. širina panela: 3200 mm Maks. dolžina panela: 3200 mm Maks. izstop glavnega žaginega lista: 110 mm Število vpenjalnih čeljusti: 11 Ncodpfjxaudzjx Aamsw

Stanje: rabljeno, številka stroja/vozila: 008377, Delovno območje os X: 3390 mm Delovno območje os Y: 1570 mm Nodpfx Aasx Swb Ajmscw Delovna površina: z vakuumskimi konzolnimi nosilci Moč glavnega vretena: 13 kW Število krmiljenih osi: 4 osi Število vrtalnih vreten: 32 Število mest za orodje: 10

Stanje: rabljeno, številka stroja/vozila: 008112, Delovno območje os X: 3390 mm Delovno območje os Y: 1535 mm Delovna raven: z vakuumskimi konzolnimi podporami Moč glavnega vretena: 15 kW Število krmiljenih osi: 5 osi Nodpfx Ajw Idgveamjcw Število vrtalnih vreten: 21 Število mest za orodja: 14

Stanje: rabljeno, Leto izdelave: 1989, Rabljeni stroj Leto izdelave: 1989 Stanje: Preverjeno delovanje Oprema in tehnični podatki: Ncedpfx Aow I U E Ajamow Maks. debelina robnega traku mm: 20 Maks. višina robnega traku mm: 51 Maks. debelina materiala v roli mm: 3 Minimalna dolžina obdelovanca mm: 140 Minimalna širina obdelovanca mm: 60 Lepljenje: 1906 patrona Pritiskalna enota Rezkalna enota 1920 za rezkanje poravnano do 20 mm in posnetje robov Potrebna površina D x Š x V mm: 3150x1800x1375 Teža pribl. kg: 800 Lokacija: Flörsheim Razpoložljivost: Kratkoročno

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 78587, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 25.920 h, Biesse, obdelovalni center z numeričnim krmiljenjem (CNC), tip Rover C 6.50 CONF3 delovno območje, os X: 4600 mm, os Y: 1535 mm os Z: 275 mm krmiljenje z 5 osmi hitrost vretena: 1000–20000 min⁻¹ sistem za avtomatsko menjavo orodja, 22 položajev vpenjalna glava za orodje: HSK F63 opremljen s pnevmatičnimi vpenjalnimi napravami za material vakuumska črpalka teža: približno 7 ton Nodpozkrlqjfx Aamscw vključno s programsko opremo in donglom.

Stanje: rabljeno, Leto izdelave: 2010, Območje delovanja X = 4.600 mm Y = 1.535 mm Z = 275 mm Njdpfjzlz Svox Aamocw Zasnovan za obremenitve, kar ga naredi idealnega za obdelavo velikih kosov masivnega lesa in konstrukcijskega lesa. Obdelovalna glava z 5-osno krmiljenje omogoča izdelavo kompleksnih tridimenzionalnih izdelkov. • Osrednji sistem mazanja • Namizni računalnik (PC) o Procesor Intel Celeron D, 2,66 GHz ali višji o 512 MB RAM o Trdi disk 40 GB o 15-palčni LCD-monitor o Tipkovnica o Miška o Optična enota (CD-ROM) o Vzporedni priključek o Serijski priključek RS-232 o USB-priključek o Omrežna kartica Ethernet za povezavo z pisarniškim omrežjem • Oddaljeno servisiranje o Neposreden dostop do modema za oddaljeno diagnostiko in servisiranje • Električna nadzorna omara • Klimatska naprava za električno omaro • Varnostni sistem o Dve varnostni ploščici, občutljivi na pritisk, na sprednji strani stroja z integrirano krmilno enoto, ki zagotavljata varno izmenično delovanje. • Signalne luči za izmenično (nišno) delovanje stroja • Funkcija nadaljevanja obdelave o Omogoča nadaljevanje obdelave po izrednem ustavitvi. • Varnostni sistemi v skladu s standardom CE Delovna miza in dodatna oprema • Večcončna miza za 10 nosilcev in 40 vakuumskih nosilcev o Omogoča istočasno nalaganje večih delov, kar zmanjšuje število menjav orodij in povečuje produktivnost. o Vakuumski sistem vpenjanja o Pnevmatski sistem vpenjanja • 10 nosilcev ATS, vsak opremljen s 4 vakuumskimi nosilci, L = 1.525 mm • Elektronsko pozicionirana miza EPS za 10 nosilcev • Zadnja vrsta opornikov za 10 nosilcev z 115 mm giba • Dodatna vrsta opornikov na 375 mm z 140 mm giba • Dodatna vrsta opornikov na 770 mm z 140 mm giba • Sprednja vrsta opornikov na 1.175 mm z 140 mm giba • 4 stranski oporniki z 140 mm giba (2 levi + 2 desni) s pripadajočo montažno opremo • 2 dodatna stranska opornika z 140 mm giba (1 levi + 1 desni) s pripadajočo montažno opremo • Senzorji položaja za vse opornike • 4 dvižna orodja za lažje nalaganje in razkladanje delov za module H = 74 mm • Vakuumski modul 132 × 146 × V74 mm • Vakuumski modul 132 × 75 × V74 mm • Vakuumski modul 132 × 54 × V74 mm • Sistem vpenjanja UNICLAMP • Komplet za izdelavo oken H = 74 mm, 40–98 mm • 6 sponk UNICLAMP z dvojnim delovanjem in sistemom hitrega priklopa • 2 modula UNICLAMP za kratke dele • Transportni trak za žagovino in odpadke • Vakuumski generator za vakuumsko črpalko 250 m³/h o Vakuumksa črpalka 250 m³/h • Vreteno in oprema za obdelavo • Moč motorja: o 12 kW pri 12.000 vrt/min (obremenitev S1) o 15 kW pri 12.000 vrt/min (obremenitev S6) • Največja hitrost vretena: 22.000 vrt/min • Vmesnik za orodje: HSK F63 • Os C: neprekinjeno 360° • Os B: ±100° • Hladilna enota s 1.600 W hladilne moči • Magazin za 15 orodij za 5-osno glavo • Dodatna nosilna roka Z za zadnje enote • Elektrovreteno PEAK POWER z močjo 8,6 kW, vmesnikom HSK F63 in zračnim hlajenjem, posebej zasnovano za aplikacije, ki zahtevajo visok navor pri nizkih hitrostih vretena • Rotacijska enota osi C, ki jo poganja menjalnik (360°) • Vrtalna enota BH9 o 9 neodvisno krmiljenih vreten za vrtanje o Vključuje: o 5 vertikalnih vrtalnih vreten z razmikom 32 mm o 2 neodvisni horizontalni vrtalni vreteni z dvojnim izhodom o Ločen pogonski motor 3 kW • Magazin za 22 orodij z razmikom središč 180 mm • Avtomatski sistem mazanja Na voljo sta dva kompleta orodij Leitz za 22.000 EUR + DDV: • Komplet orodij LEITZ IV 68 • Komplet orodij LEITZ IV 90 Ta stroj se prodaja v imenu stranke. Ogled je možen po predhodnem dogovoru. Za dodatne i

Stanje: rabljeno, Leto izdelave: 2006, Numerical control XP 600 Working area in the X-axis: 3060 mm Working area in the Y-axis: 1140 mm Working area in the Z-axis: 160 mm Number of working zones: 2 Bar worktable Number of adjustable bars for suction cup support: 6 Number of pneumatic Bakelite bars for panel lifting (?): [please verify] Nedpfxov Aacfj Aamscw 2 adjustable suction cups per bar, each with vacuum sealing for panel fixation during machining 1 vertical electrospindle with C-axis, 12 kW motor Tool change system with 10 positions, located at the machine drilling head, cone type: ISO 30 Drilling head BH19L with 18 spindles, configured as follows: - 7 vertical on the X-axis - 6 vertical on the Y-axis - 4 horizontal on the X-axis - 2 horizontal on the Y-axis - 1 independent saw blade unit for grooving in the X-axis Front photocell guard and safety system Automatic lubrication system (?) Climate control system for cooling and cleaning the machine control unit Vacuum pump: 250 m³/h TECHNICAL DETAILS MUST BE VERIFIED

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Delovno polje X: 4600 mm Delovno polje Y: 1570 mm Delovno polje Z: cca. 250 mm 3-osni elektro vreteno Vrtalni vreteni za vertikalno vrtanje: cca. 22 Vrtalni vreteni za horizontalno vrtanje X: 6 Vrtalni vreteni za horizontalno vrtanje Y: 4 Rezilo za utor v smeri X Fiksni horizontalni motor za utor vrat Verižni menjalnik orodij, cca. 22 mest Delovna miza z 8 prečkami Vakuumska črpalka 90 m³/h Programska oprema: BiesseWorks Varnostne preproge Zaščitne mreže Ncjdpfoy Exz Dex Aamsw Teža cca. 6100 kg Vključuje priseske in 1 nagibno agregat za vrtanje–rezkanje–žaganje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops Ncjdpjx D H Hcefx Aamjw • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: zelo dobro (rabljeno), Panel dividing saw angular system Control: OSI Plus - Optiplanning software No. 2 powered roller conveyors, each approx. 4500 x 2200 mm Lifting table (mm): 4500 x 2200 1st pusher saw with grippers (qty): 5 Rotating device (for panels) up to 90° 1st panel dividing saw max. cutting width (mm): 4500 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Nsdpsukhd Aefx Aamscw Variable saw carriage feed rate (m/min): 1 - 170 Waste cutting shear 2nd pusher saw with grippers (qty): 10 2nd panel dividing saw max. cutting width (mm): 2200 Max. saw blade projection (mm): 152 Scoring saw (max. saw diameter): approx. 215 mm Main saw (max. saw diameter / power): 530 mm (30 kW) Variable saw carriage feed rate (m/min): 1 - 170 No. 2 front air flotation tables (mm 2200 x 1500) Automatic unloading bridge for cut panels "RBO (BIESSE)" Model Lifter with 6 stacking positions

Stanje: rabljeno, Leto izdelave: 2007, skupna višina: 2.500 mm, skupna dolžina: 11.000 mm, skupna širina: 2.400 mm, Color: Grey Unladen weight: 7,200 kg Price: On request - Machine available from: 2026-06-24 - Year of manufacture: 2007 - Documentation available: Yes - └ Documentation type: Technical data, electrical schematics, user manual, assembly instructions - └ Language: Dutch - └ Format: Paper - CE marking: Yes - CE certificate: No - Serial number: 97649 - Number of milling spindles [pcs]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs]: 5 - - Min. spindle speed [rpm]: 1,000 - - Max. spindle speed [rpm]: 20,000 - - Main motor power [kW]: 9 - └ Milling spindle 2: Njdpfx Aajy Ipntemocw - - Number of controlled axes [pcs]: 3 - - Main motor power [kW]: 18.5 - Milling table type: Beam table - Tool clamping system: HSK-F63 - Material clamping system: Pneumatic - Drilling tool included: No - Tool changer positions [pcs]: 22 - System/software: BiesseWorks - Safety feature: Safety mat - Vacuum pump included: Yes - └ Quantity [pcs]: 1 - └ Brand: Becker - └ Type: VTLF 250 - └ Year of manufacture: 2007 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - Tools included: No - CNC options: EPS system, waste belt, hand control - CNC documentation available: USB stick, user key/licenses - Table length [mm]: 6,200 - Table width [mm]: 1,320 - Working area X [mm]: 6,200 - Working area Y [mm]: 1,535 - Z-axis working area [mm]: 275 - X-axis maximum stroke [mm]: 6,820 - Y-axis maximum stroke [mm]: 1,963 - Transport dimensions: 11,000mm x 2,400mm x 2,500mm (l x w x h) - Transport weight [kg]: 7,200kg - Transport packages [pcs]: 1 Financial information VAT: The price stated is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all items from the industrial sector Glenn Smeets