Then - nakup rabljenega (325)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, številka stroja/vozila: 11193, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, dolžina obdelovanca (maks.): 13.000 mm, širina obdelovanca (maks.): 450 mm, višina obdelovanca (maks.): 280 mm, skupna masa: 14.000 kg, leto zadnje generalne obnove: 2019, Oprema: CE označba, The machine underwent a complete factory refurbishment by Hundegger in 2019. The machine will be available from April 2027. Until then, it can be viewed in full operation at our facility by appointment. Machine equipment Infeed roller conveyor with 5-chain cross transfer system Rotating under-table saw Under-table saw hood 4-axis universal milling unit (UF4) Combination support for vertical tooling Vertical milling unit, 5.5 kW 2 drilling units, 2.2 kW each Combination support for horizontal tooling Drilling unit, 2.2 kW Swivelling horizontal drilling unit, 2.2 kW Milling unit, 3.0 kW End marking device Fully automatic beam turning station "Zweihand-System" transport and positioning system 2.65 m outfeed roller conveyor 6-arm stacking table Ibsdpfx Ajzi Spmof Asb Electronic control system Protective cover above the waste disposal area

Stanje: potreben popravila (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 103-20 ` 104-20, skupna višina: 1.900 mm, skupna širina: 3.400 mm, skupna dolžina: 4.100 mm, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, We are selling 2 identical apple slicing machines, with a common feed tank and feed line.T his machine is suitable for processing various fruits such as: apples, pears, peaches, nectarines, persimmons, oranges with skin, kiwis, pineapples. It may be used for slicing into RING SLICES, SEGMENTS and CHUNKS with or without CORING and it may be used for producing WHOLE CORED fruit such as apples, pears, peaches, nectarines, etc. It is therefore perfectly suitable for preparing fruit for the drying industry, for the confectionery and baking industry, for fresh fruit salads, for the snacks industry or for fruit preserves. Ibjdpfx Asx Sx Azof Aob The machine is very simple and versatile in that it allows switching very quickly from RING-SLICING to SEGMENTING to CHUNKING (with or without CORING according to the type of fruit being processed) to CORING ONLY depending on your production needs. It allows changing very rapidly as well the thickness of slices, the number of segments, the dimension of chunks and the diameter of coring. This machine is completely made of AISI 304 stainless steel and it may be installed inline with other machines. Roundish fruit may be automatically fed, singulated in the loading area and then transferred onto the stainless steel conveyor equipped with an automatic orienting system, allowing automatic fruit alignment inside the tray hollows (automatic orienting system is suitable for apples, peaches, nectarines and leafless persimmons). Other types of fruit are manually positioned on the stainless steel conveyor. In the slicing section, a sharp and precise cut, which does not affect organoleptic qualities, guarantees maximum hygiene and healthy products. Here, fruit is sliced into RINGS or SEGMENTS or CHUNKS and/or CORED by means of interchangeable cutting units that allow varying slicing dimensions and coring diameter. Sliced fruit and vegetables are discharged on a belt conveyor. Cores fall underneath the working surface where a conveying belt, not included in the supply, may be installed to carry them out of the machine and discharge them into a collecting container. All safety guards may be easily removed thanks to quickly releasable interlocked hinges. This allows easy, quick and safe maintenance as well as thorough cleaning.

Stanje: rabljeno, Proizvajalec: Then Tip: Konusni zalogovnik na kolesnem ogrodju Mešanje: Da Ibjdpfjx R Dzasx Af Asb Uporabna prostornina: 150 litrov Ročni izpustni ventil

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2020, skupna dolžina: 950 mm, skupna višina: 1.360 mm, skupna širina: 700 mm, skupna masa: 188 kg, dolžina podajanja os X: 297 mm, dolžina pomika po osi Y: 210 mm, dolžina podajanja os Z: 200 mm, We are offering this ready-to-use Keyence AGILISTA-3200W. All maintenance has been carried out by Keyence. A complete service was recently performed by Keyence, and since then the printer has been on standby. The printer is in excellent condition. Complete accessory kit included for immediate start: - 1x Cartridge of print material - 1x Cartridge of support material - 3x Waste containers - 1x Settling tank for printed parts Ibodpjy Hmhhofx Af Aob - Cleaning set for parts and printer Viewing by appointment possible. On-site instruction/training available. Technical specifications: - Print material: AR-M2 (transparent print material), AR-H1 (heat-resistant print material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 µm, standard resolution AR-M2: 20 µm, AR-H1: 20 µm, AR-G1L/H: 30 µm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: Color touch panel - Dimensions: 95 x 70 x 136 cm - Weight: 188 kg If you have any questions or need more information, please feel free to send us a message or call us.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, največja širina rezanja: 450 mm, delovna dolžina: 16.000 mm, delovna širina: 450 mm, Oprema: varnostna svetlobna zapora, For sale is a well-maintained Hundegger K2 joinery line with planing machine. The system is fully functional and has been serviced several times a year by Hundegger. The machine will remain in operation until early November and can then be dismantled by the buyer. = Equipment: Isdpfszb I Iwox Af Asbb = Machine type K2-5-450 - Maximum wood length intake and outfeed: 16 m - Colour: RAL 5012 blue - Infeed cross conveyor: 6 strands, horizontal, 2.2 m, with flat link chains - Extendable timber unloading platform - Underslung swivel cross-cut saw - 5-axis universal milling unit UFS (roller cutter, finger cutter, dovetail cutter) - Combination support for vertically-operating tools (finger cutter, drill unit 2.2 kW) - Combination support for horizontally-operating tools (drill unit 2.2 kW, drill unit 2.2 kW) - Front marking unit - 6-arm discharge table - Hydraulic beam turning station - Refined timber contact surfaces (the susceptible plastic coating replaced by maintenance-free stainless steel, chrome-plated tables, stainless steel rollers) - 10 m extension roller conveyor with feed roller - Outfeed cross conveyor: 7 strands, 3.5 m, with flat link chain - Planing machine interface: HMD = Planing machine - HM-D - Fully automatic four-sided planing and chamfering - Planing motors 7 kW - Automatic thickness planing adjustment - Direct planing control - Planer directly integrated downstream of the joinery machine = Miscellaneous - Viewing possible at any time by appointment. - If in operation, an inspection during production is possible. - A new K2 with planing machine and comparable equipment costs around €800,000. - New spare parts in stock can be included at a favourable price. - Machine runs perfectly, however, no warranty or liability will be assumed for future damages. - Ideal machine for medium to large-sized timber construction businesses or sawmills. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - For questions, please call Monday to Friday from 7:00 to 12:00 and from 13:00 to 17:00, or by email anytime. - Unfortunately, I could not provide a mobile number, otherwise the ad would be blocked.

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Technical Data for Bale Opener Line for RDF, MSW, Paper, Cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Model: BO 4000 Ibsdpfx Afezp H R Ej Aob Year of Manufacture: 2015 Number of Bales Opened: 674 Operating Time: Only 3 days, exclusively during commissioning of the entire system at new installation Opening Time: approx. 45 seconds per bale Bale Dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Maximum Bale Weight: 2,000 kg System Discharge Height: 1,400 mm Maximum Conveyor Width: 1,200 mm Material to be Opened: RDF/MSW System Availability: 98% Noise Level of Bale Opening Line: 85 dB(A) Total Connected Load: 37 kW Rated Current: 125 A Operating Display: SIEMENS SIMATIC HMI Touch Control System: SIEMENS S7 ET200S Machine Dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of Supply: - Feed Conveyor 3,500 x 1,200 x 1,400 mm - Infeed Conveyor to Opener 1,500 x 1,200 x 1,400 mm - Bale Opener (gripper with cutter) Special Equipment: - Oil heater in hydraulic oil tank - Control cabinet heater - Oil cooler for hydraulic unit Explanation for Short Operating Time: The complete Cross Wrap bale opener line type BO 4000 was installed in 2015 at a municipal waste incineration plant. The purpose of the installation was to allow municipal waste to be received, baled, wrapped, and stored in case of a plant malfunction or maintenance, until normal operation resumed. After the issue was resolved, all bales would then be opened and the waste fed back into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned and subsequently never used in regular operation. Only during initial commissioning in 2015 were 674 bales opened over three days. The system is in excellent, ready-to-use condition. Due to plant modifications, the installation area is needed for other purposes, and the complete line is therefore offered for sale. Brief Description of the Bale Opening Process: The compressed bales are placed onto the infeed conveyor from the side or rear using a forklift. For opening, the bales must be positioned with the wire or twine binding running horizontally to the conveyor; otherwise, bales must be rotated 90°. The infeed conveyor moves each bale to the cutting unit. The grippers hold the wire or twine strapping firmly. The rotating knife cuts the bale lengthwise. The gripper then returns to its initial position. The opened bale is then conveyed to the discharge chute and drops onto the subsequent conveyor system. Notes: Original price of the complete system was €296,000. Complete documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. The system has been dismantled into transportable units, stored, and is available for inspection and loading at short notice. No liability is assumed for the technical specifications or any potential errors.

Leto izdelave: 2006, stanje: rabljeno, Ponujamo rabljeni Comandulli ATHENA CU 12 Athena, letnik 2006. Ibodpfjy Igyyex Af Aeb Tip: ATHENA CU 12 Serijska številka: 00706 Letnik: 2006 Nazivni tok: 63 A Nazivna moč: 15 kW Napajanje: 3 x 380 V Frekvenca: 50 Hz Če imate dodatna vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 34.000 km, moč: 161,81 kW (220,00 KM), konfiguracija osi: 4x4, gorivo: dizel, Leto izdelave: 1995, Oprema: dodatne luči, pogon na vsa štiri kolesa, spojka prikolice, Are you looking for a reliable and affordable emergency vehicle for your fire department? Then you have come to the right place! From our immediately available stock of used vehicles, we offer you: Water Tender TLF 16/25 ALL-WHEEL DRIVE 4x4 Magirus on IVECO 135E22 The TLF 16/25 is the proven combination of the advantages of crew fire engines and water tenders. Equipped for most scenarios, it offers a crew seat configuration and ample space for firefighting and rescue equipment. General Data: Iedpfjxk T Efsx Af Asbb • Year of manufacture: 1995 • Mileage: approx. 34,000 km Chassis: • IVECO 135E22 4x4 with 220 hp (159 kW) • Diesel engine with manual transmission Cab: • Standard, spacious crew cab (1+5) in RAL 3000 (fire red) • Mounts for 2 self-contained breathing apparatus in the crew compartment Bodywork: • Manufacturer: Magirus Eurofire • TLF 16/25 body built to DIN standard • Three spacious side equipment compartments per side • Retractable steps for front side equipment compartments • Mounts for standard firefighting equipment • Additional mounts for 2 more breathing apparatus • Roof box Fire Pump/Water Tank: • Firefighting centrifugal pump Magirus FPN 1600-8 • Performance: 1,600 l/min at 8 bar • Water tank: 2,600 l Firefighting Equipment: • 50 m fixed quick attack line in G6 upper compartment Safety and Lighting: • 2 roof-mounted revolving beacons at the front, 1 at the rear • Pneumatic special signaling system (Martin Horn) • Rear-view camera • Hygiene board available on request We are happy to make you a specific offer and present this vehicle to you in detail at our Berlin location. All information is given to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement does not constitute an offer, but is for information purposes only. Subject to prior sale!

Leto izdelave: 2004, stanje: rabljeno, Funkcionalnost: nepreverjeno, Semi-automatic flocking system Manufacturer: AIGLE Macchine srl The system is used for coating various materials. It can also be utilized as a painting system. In this specific application, it was used for coating the interior parts of automotive storage compartments. Glove boxes were suspended on a conveyor belt and first manually sprayed with adhesive. Then, the boxes were coated with flocking material in individual flocking cabins. The spraying direction changes depending on the station. After the 4 flocking cabins, there are 2 cleaning cabins. The blown-off, unbonded fibers are subsequently reintroduced into the coating process via the flock distribution system. Similarly, unbonded fibers from the four flocking cabins are also returned to the process. Iedpfev Izr Esx Af Aebb Cabin dimensions: Width: 2100 mm Depth: 2300 mm Height: 3260 mm Locking door Width: approx. 880 mm Height: approx. 750 mm Capacity: 1000 - 1500 units in 8 hours, depending on shape and materials Voltage: 400 Volt 50 Hz Installed power: 26 kW Electrical supply: 480 V 60 Hz Required space for flocking system with chain conveyor approx. 16 x 5 m The machine is dismantled and assembled in the warehouse. The machine was fully operational up to the last day of use.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 1.685 h, največja hitrost: 80 km/h, skupna masa: 11.500 kg, skupna višina: 2.500 mm, skupna dolžina: 9.720 mm, skupna širina: 2.300 mm, mobilnost: mobilen, številka stroja/vozila: 11520, For sale: this used Husmann HFG IV (HFG4) shredder, year of manufacture 2016. Operating hours: 1685 h All 60 flail tips were newly replaced just a few operating hours ago. Several spare flails are still available and will be included. All 8 V-belts were also recently replaced a few operating hours ago. Both NOx sensors and the AdBlue sensors are new. Important note: Drawbar is bent, therefore currently not roadworthy/road-licensed. Throughput: 60-100 m³/h depending on material and feed equipment Recommended max. log diameter: 200 mm Machine number: 11520 Max. rpm: 1200 rpm Operating voltage: 24 V Operating pressure: 160 bar Power: 205 kW Permissible total weight: 11,500 kg Manufacturer description: Iodpfey Hi D Sjx Af Aobb FLAIL SHREDDER HFG VI "These powerful Husmann machines, designated "HFG (Husmann Forest Machines)", achieve uniform, fine, and clean shredding through special impact technology and the arrangement of the flails. The shredded material is conveyed via a large intake hopper equipped with a forged steel chain conveyor to the feed roller and then to the flail rotor. The pendulum-mounted feed roller is rack-guided and driven hydraulically by a large reduction gear. The feed roller, which adjusts to the incoming material, can also be controlled and lifted by remote control. The roller or feed opening of 460 mm ensures smooth and quick feeding. The robust rotor made of high-quality steel (1000 kg) is shatterproof even when processing heavy foreign objects, thanks to additional reinforcements and sophisticated construction technology. Mounted on the eight hardened flail shafts are 60 free-swinging flails, arranged offset. The quick-change system involves bolting the tungsten carbide-tipped flail tips to the flail holder. The large number of 50 mm wide flails and the rotor's direction of rotation across a breaker edge onto the feed belt allows for optimal shredding of material, making it suitable for composting. The load-dependent and steplessly adjustable feed speed of the scraper floor and feed roller allows further control and improvement of the quality of the output. The design of the rotor housing and discharge area allows the material pile to reach a height of up to 2.5 meters. The powerful 205 kW auxiliary engine is easily accessible through large service doors, ensuring ease of operation and maintenance. Clear controls and safety features such as rotor overload protection and reverse mechanism are hallmarks of our system. The mobile shredding unit is equipped with an 80 km/h chassis with air brakes and is optionally available as a stationary unit or fitted with a hook-lift frame. The HFG IV is a composting machine for organic and inorganic waste designed for mechanical feeding." If you have any questions or need more information, feel free to send us a message or call us.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 300 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: RA9VE021000061, skupna masa: 2.000 kg, višina zlaganja: 300 mm, vrsta vhodnega toka: trifazni, skupna širina: 1.600 mm, skupna dolžina: 7.000 mm, skupna višina: 1.500 mm, vhodna napetost: 400 V, vhodni tok: 16 A, Konica Minolta AccurioPress C3080 digital colour press, year 2018. The machine was initially used as a showroom demonstration unit, then transferred under a leasing contract in 2022. It was only operated briefly for a few months before being taken out of service following a business closure. After shutdown, the press was powered off, packed, protected, and stored under suitable conditions. The last meter reading, dated July 8, 2024, registers 18,562 black and white prints and 494,520 colour prints—very moderate volumes considering the machine’s rated capacity and expected lifespan. The press is equipped, among other things, with the following options and modules: DF-706 document feeder, EF-103 envelope kit, inspection lamp, HT-511 heating and dehumidifier unit, MB-508 bypass tray, PF-707m suction feed unit, HT-506 thermo-regulator, FA-502 connection kit, FS-532 stapling module, PK-522 punching kit, HM-103 humidifier, RU-518 relay unit, SD-513 booklet making and stapling unit, TU-503 head and tail trimmer, CR-101 creasing kit, FD-504 spine pressing module, IQ-501 intelligent quality control unit, VI-511 and VI-509 interface kits, Fiery IC-313 print controller, and monitoring connection. Ibedpfxsx Syghs Af Ajb

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, delovna širina: 510 mm, površinska zmogljivost: 2.300 m²/h, skupna masa: 230 kg, trajanje garancije: 12 meseci, kapaciteta rezervoarja za vodo: 42 l, Technical Data: CONDITION – NEW! Manufacturer: Hako Model: Scrubmaster B45 CLH TB510 Type: Compact Scrubber-Dryer Country of Origin: Germany Wheel Drive: Yes Charger: Built-in Power Supply: Battery Battery Type: Sonnenschein GF12105 V (12V 105 Ah) Water Tank Type: AntiBac Number of Included Brushes (pcs): 1 Brush Width (mm): 510 Ijdpoy E Rvaofx Af Asbb Squeegee Width (mm): 860 Water Tank: Clean / Dirty (l): 42 / 42 Theoretical Coverage (m²/h): 2300 Operational Weight (kg): 230 Scope of Delivery and Equipment: AntiBac water tank 380 mm floor nozzle (spray and suction function) 150 cm hose with spray gun 5 m suction hose for manual suction nozzle 510 mm medium-hard disc brush 860 mm suction bar Oil-resistant squeegee lips 2 x 12V 105Ah Sonnenschein batteries Integrated charger Advantages of the CLH Version: The AntiBac tank used in Hako machines is made of a material with antibacterial properties. This reduces the growth of bacteria and fungi inside, improves the machine’s hygiene, and minimizes unpleasant odors. This solution is particularly advantageous in areas with high hygiene requirements, such as hospitals and food-processing facilities, and also helps maintain the tank in better condition for longer. The device is equipped with a manual spray and suction nozzle, enabling wet cleaning of hard-to-reach areas, such as corners and niches. The 5 m hose provides high flexibility and convenient freedom of movement. This is the ideal solution for tasks in production facilities with narrow, hard-to-access areas away from the main aisle. Using the spray gun integrated into the suction pipe, cleaning solution can be dispensed easily from the machine’s tank and then removed by the built-in suction turbine.

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WT 1104, skupna višina: 3.421 mm, skupna širina: 4.704 mm, skupna dolžina: 9.550 mm, nosilnost: 200 kg, gradbena višina: 3.421 mm, Vacuum Turning Gantry for Panels The turning unit offers two different "automatic" operating modes: I. Transfer without rotation The panel is shifted sideways, aligned to the reference edge (zero line) of the machining center, and indexed further to the machining center (BAZ). II. Transfer with rotation The panel is shifted sideways and rotated along its longitudinal axis before being indexed to the machining center (BAZ). Each function can also be operated manually in "hand" mode. SPECIFICATIONS: Maximum panel size: Iodpfx Afoyta R Uj Ajbb L x W x H: 8000mm x 2500mm x 100mm Maximum weight: 200kg Minimum panel size: L x W x H: 1500mm x 1500mm x 12mm The turning gantry is equipped with a total of 24 vacuum suction cups, ensuring gentle handling of the elements. The elements are always picked up using vacuum and then either transferred horizontally to the zero line of the machining center or additionally rotated by 180° while in transit before being placed at the reference edge. Rotation is monitored via absolute encoders; cross-travel positioning is controlled by adjustable photoelectric sensors. Vacuum is generated by a blower. The roller table, measuring 8500 mm x 4300 mm (width), with roller diameter Ø 108 mm, is fitted with material-friendly rubber rings; it is powered by a SEW geared motor. The roller table is controlled via a frequency inverter, speed v=45 m/min, freely adjustable. GENERAL INFORMATION: The entire area is fenced off, with two sliding doors securing the longitudinal side of the system. The doors are monitored for safety. The operator panel with a 12" touchscreen is installed in the fenced area. The installed PLC S7-1500 is programmed with three operational levels: • Automatic mode • Manual mode • Maintenance mode Input signals, feed side: - Start roller table - Turn yes/no - Emergency stop (entire system) Input signals, discharge side: - Start roller table - Emergency stop (entire system) Output signals, system: - Emergency stop (entire system) - Part received

Leto izdelave: 2008, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 09808, Naprodaj: obdelovalni brusilni stroj Commandulli Athena CU 12 – NETO 40.000 EUR Naprodaj: obdelovalni brusilni stroj Commandulli Athena CU 12, letnik 2008, za neto ceno 40.000 EUR. Stroj je sestavljen, delujoč, zanesljiv in robusten. Iedpfx Aoycvx Tsf Aobb Letnik: 2008 Cena: 40.000 EUR neto Stanje: Sestavljen in v delujočem stanju Značilnosti: Stabilna in robustna konstrukcija, odlična zmogljivost Tip številka: 09808

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, moč: 570 kW (774,98 KM), skupna masa: 4.000 kg, vrsta vhodnega toka: trifazni, pritisk: 6 letvica, temperatura: 120 °C, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, topla voda, Mobile oil heater in 20-foot container – Buderus 570 kW / Weishaupt burner – Year 2023 (also convertible to gas) We are selling our mobile oil heater as we have switched to solar. The unit served as an emergency or supplementary heating system, is 100% operational, and is sold as is – including stainless steel chimney, electrical distribution panel, and complete interior fittings. Technical Data: Boiler: Iedpjy Sz Ruofx Af Ajbb Buderus Logano plus GE615, output 511–570 kW (nominal), max. 120 °C, 561 l water capacity, PMS 6 bar Burner: Weishaupt WM-L10/3-A monarch, T-3LN multiflam®, year 2023, heating oil EL (200–900 kW), NOx class 3 Power supply: 230 V / 400 V, 50 Hz, protected via Hensel main distribution (3x63 A) with CEE power sockets Container: 20-foot standard container (approx. 6.06 × 2.44 × 2.59 m), approved for road transport, insulated and equipped with lighting Stainless steel chimney installed externally and guyed, included Complete internal piping with insulation, circulation pumps, and water treatment system Flexible fuel options: The Buderus GE615 is an oil/gas condensing boiler and can be converted to gas operation by changing or retrofitting the burner – perfect for locations with a gas connection. Applications: Ideal as a mobile large-scale heat source for construction projects, larger building complexes (e.g., as interim heating until the final system is commissioned), hall heating, or for hot water supply for major projects. Ready for immediate operation after connecting piping or hoses to the existing taps. Processing: We will disconnect the piping at the tap. The container can then be collected by a suitable truck (container transport) and set up at the new location. For commissioning (and possible conversion to gas), we expressly recommend engaging a certified heating and plumbing company to ensure proper adjustment of all boiler and burner settings. Original cost in 2023: approx. €150,000 Asking price: €65,000 negotiable – serious offers welcome, just contact us. Viewing possible at any time by appointment. Feel free to contact us with any questions!

Stanje: pripravljen za uporabo (rabljen), Foresite C3 / C.I. Critical Cleanliness Control Tester, Analytical Technology Year of manufacture: 2011 The C3 is unique among electronic cleanliness quality testers. It remains the only tester on the market that indicates whether a specific, critical area of a PCBA is clean. Simply select the components and/or circuit areas that are most sensitive and susceptible to contamination and/or reliability issues, and test a small area (0.1 in²). The C3 quickly provides feedback on whether potentially detrimental residues, often caused by manufacturing processes, are present. Once critical areas for testing have been identified, the operator simply inserts a new disposable test cell into the steam head and manually moves the head on the articulated arm over the test area. The weight of the arm and steam head seals the test cell against the test surface. The operator then starts the automated test sequence. Within 7-10 minutes, the operator will know whether the tested area of the product is clean. The C3 can be used directly in the production area. At the end of the test, the cell can be easily removed using the cell ejector on the head. The test sample in the cell, efficiently extracted from the small test area by steam, can be further analyzed to identify specific contaminants and their concentrations. The entire test is straightforward for the operator, with results that are not operator-dependent. The use of Pro-Site single-use test cells and extraction solutions prevents cross-contamination of the sample. You are welcome to arrange an inspection. Isdpfxoxhcklj Af Ajbb We are happy to organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you supply a valid VAT ID number. Subject to prior sale. Visit our shop and see our other offers as well. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Technical data deviations and errors in the article description are possible and subject to change.

Stanje: rabljeno, Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 21.809 h, vrsta vhodnega toka: trifazni, sesalna zmogljivost: 20.000 m³/h, filtrirna površina: 222 m², skupna višina: 3.700 mm, skupna dolžina: 1.800 mm, skupna širina: 2.100 mm, skupna masa: 1.600 kg, Novus AirTower FT0120018 EC Filter Ventilation Tower - 20,000 m³/h Industrial hall filtration and ventilation for welding shops – suitable for numerous technological processes in production facilities, primarily in metalworking applications. Very low energy consumption thanks to the use of innovative fans. Replacement of conventional fans with EC fans provides SIGNIFICANT savings by minimizing electricity usage. The EC fan, equipped with an integrated frequency inverter, offers the ability to regulate speed, power consumption, and unit performance at 60%, 80%, or 100% workload. Top air intake and draft-free bottom discharge – directing purified air precisely to work areas. Based on the principle of layered ventilation; unit does not require ductwork installation. Cartridge filter elements – self-cleaning via compressed air impulses during operation. Filter cleaning is controlled by differential pressure – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air, free of draft, at a velocity below 1.2 m/s – exactly where operators inhale it – and across a wide 270-degree area. The Airtower operates according to the layered ventilation method, recommended by occupational health authorities and regarded as the optimal type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Specifications: - Four EC fans, each rated at 3.9 kW - Airflow rate: 20,000 m³/h - Filter surface area: 222 m² - Six cartridge filter elements - Fine final filter - Fire protection package - EC Blue Energy Package - Hall dust sensor – with LED indication, relaying information to the Airtower, enabling power adjustment according to dust concentration. Energy savings are achieved depending on the real-time dust levels within the hall. Iedpfx Afexxalns Aebb Very quiet operation Warehouse no.: 1066

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2010, obratovalne ure: 61.953 h, številka stroja/vozila: 035100300072, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: mehanski, proizvajalec krmilnikov: SIEMENS, model krmilnika: SINUMERIK OP 010S, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: IPG, laserska moč: 3.000 W, najv. debelina pločevine: 20 mm, najv. debelina jeklene pločevine: 20 mm, maks. debelina pločevine iz nerjavečega jekla: 12 mm, maks. debelina aluminijaste pločevine: 8 mm, maks. debelina medeninaste pločevine: 5 mm, najv. debelina bakrene pločevine: 5 mm, dolžina mize: 3.200 mm, višina mize: 100 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, delovna višina: 100 mm, potovalna razdalja osi X: 3.100 mm, pomik osi Y: 1.550 mm, pomik po osi Z: 180 mm, moč: 22 kW (29,91 KM), vhodna napetost: 400 V, vhodni tok: 31 A, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, priključek za stisnjen zrak: 8 letvica, skupna masa: 12.000 kg, skupna dolžina: 7.830 mm, skupna širina: 8.217 mm, leto zadnje generalne obnove: 2023, Oprema: CE označba, centralizirani mazalni sistem, dokumentacija / priročnik, hladilna enota, nujno zaustavitev, odsesavanje hlapov, odsesavanje prahu, varnostna svetlobna zapora, ADILAS is a combined machine for laser cutting of carbon steel sheets (also known as mild steel), stainless steel, aluminum alloys, brass, and copper. The machine is equipped with: • an automatic pallet changer that allows loading of a new sheet during the cutting process. Ijdpfx Ajwyuruef Aobb Unloading of finished parts takes place: • via the table not being used during the cutting phase: the table used for unloading, once emptied, will then be repositioned for loading the next sheet.

Stanje: rabljeno, Leto izdelave: 2009, obratovalne ure: 6.359 h, nosilnost: 3.000 kg, vrsta goriva: električni, vrsta prenosa: drugo, skupna masa: 5.800 kg, lastna masa: 3.800 kg, barva: rdeča, prevoženi kilometri: 6.359 km, prva registracija: 10/2009, vzmetenje: drugo, voznikova kabina: drugo, emisijski razred: noben, gorivo: elektrika, Are you looking for a reliable forklift for your daily operations? Then you should take a closer look at this Toyota 7FBMF30. This electric forklift combines Toyota’s proven quality with efficient and emission-free drive technology. Thanks to its electric drive, it is ideal for use in warehouses, production facilities, or anywhere quiet and clean operation is required. The striking red paintwork not only gives it a professional appearance, but also ensures high visibility in day-to-day operations. First registered in October 2009, this Toyota forklift impresses with its robust construction and the durability for which Toyota is renowned. That’s why companies worldwide trust this brand when it comes to reliable industrial trucks. Iedpfoyt Sv Nex Af Ajbb Whether for loading and unloading trucks, in-house material transport, or daily warehouse tasks – this Toyota 7FBMF30 is ready for its next job and will help you make your workflows efficient and cost-effective. See this reliable electric forklift for yourself and secure a proven solution for your business before it’s gone. Sale only to commercial customers (agricultural businesses, freelancers, small and large enterprises) or for export. Subject to prior sale and errors excepted.

Stanje: rabljeno, številka stroja/vozila: PMAM010000, Bertolaso Athena 40/8, naprava za polnjenje sadnih sokov s prilagodljivimi rotacijskimi glavami sestava: - vakuumski polnilnik s 40 polnilnimi ventili Iodjzz Rtzepfx Af Aobb - naprava za zapiranje s 8 postajami za 3 različne vrste zapork: aluminijasti navojni pokrov 28 TS RO PP (MCA28), VC 30x60 (BVS 30/60) in plastični navojni pokrov, ki se uporablja v sistemu »pick & place«, s pripravljeno glavo z magnetnim navorom 38 mm.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, proizvajalec krmilnikov: CYBELEC, model krmilnika: CybTouch 6, skupna masa: 11.600 kg, skupna širina: 2.080 mm, skupna višina: 2.060 mm, dolžina rezanja (maks.): 3.100 mm, največja dolžina izdelka: 4.000 mm, CNC-strižna, letnik 2019. Ta naprava GILARDI ATHENA 3.10 ima delovno dolžino 3.100 mm in kapaciteto striženja 10 mm pri 42 kg/mm². Opremljena je z nadzorno enoto CYBELEC CybTouch 6 CNC, samodejno nastavitvijo reznega razmika in robustnim jeklenim okvirjem. Če iščete visokokakovostno strižno opremo, razmislite o stroju GILARDI ATHENA 3.10, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Kapaciteta striženja: • 10 mm pri 42 kg/mm² • 6 mm pri 70 kg/mm² • Nastavljiv kot striženja: 0,5°–2,5° • Hitrost striženja: 6–14 udarcev/min Isdpfx Aozn Nvzjf Ajbb • Hod zadnjega opore: 1.000 mm • Število prijemal: 14 • Moč glavnega motorja: 11 kW • Izvis: 175 mm • Nadzorna enota: CYBELEC CybTouch 6 CNC z barvnim zaslonom • Značilnosti: • Samodejna nastavitev razmika rezila • Samodejna nastavitev hoda rezila • Nastavljiv kot striženja rezila • Kaljena, štirikotna rezila (54–60 HRC), razdeljena na 835-mm dolge odseke • Sprednji oporni elementi za pločevino • Zaščitni elementi za operaterja • Sistem za pritrditev pločevine • Trden, varjen okvir iz jekla ST44A1

Leto izdelave: 2024, obratovalne ure: 2 h, stanje: novo, Funkcionalnost: popolnoma funkcionalen, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precaution, the basket was completely sandblasted and each individual stainless steel component pickled and then hand-polished. All screws and nuts were replaced with new ones, all shafts were replaced with stainless steel versions, and all deep groove ball bearings were also swapped for stainless steel deep groove ball bearings. Replacement motors (drive for the basket and the modular belt), as well as approximately 20 meters of spare modular belt, are included in the sale. Ibsdpjyvrvpofx Af Asb Modular belt total width: approx. 340 mm, blue surface width approx. 280 mm, outer side surfaces on both sides made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Distance between individual tiers: 105 mm. Total tower height: 2060 mm. Overall length including outfeed conveyor: approx. 4000 mm. Outfeed length: approx. 2000 mm. Total width: 2235 mm. Internal running surface width: 370 mm. External running surface width: 465 mm. Modular belt made of stainless steel and POM. An additional Z-conveyor is included with this spiral cooling tower. The pictured Z-conveyor is for reference only and is not the original.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WFDFLT44001000966, lastna masa: 9.400 kg, največja dovoljena obremenitev: 30.600 kg, skupna masa: 40.000 kg, konfiguracija osi: > 3 osi, prva registracija: 10/2010, dolžina tovornega prostora: 7.145 mm, širina tovornega prostora: 2.750 mm, višina nakladalnega prostora: 900 mm, skupna dolžina: 12.120 mm, skupna širina: 27.500 mm, skupna višina: 900 mm, vzmetenje: jeklo, velikost pnevmatike: 235/75 R17,5", barva: rdeča, These images are for reference only! Gross weight perm. / technical: 24,000 / 40,000 kg Payload perm. / technical approx.: 14,600 / 30,600 kg Axle load perm. / technical: 24,000 / 40,000 kg Unladen weight (base version) approx.: 9,400 kg +/- build tolerance Overall length approx.: 12,120 mm Overall width max.: 2,750 mm Neck length approx.: 2,850 mm Low loader platform length in driving lane area incl. rear bevel approx.: 7,145 mm Rear bevel length approx.: 850 mm Frame width approx.: 2,750 mm Loading height in the low bed (loaded) approx.: 900 mm Tow height approx.: 950 mm Drawbar length approx.: 1,700 mm Chassis Low Loader Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear support 2 wheel chocks with holders Side underrun protection, aluminium 1 plastic toolbox Extendable widenings to 3,250 mm (not at rear bevel) (tracking width of transported construction machines or vehicles must not exceed outer frame width of 2,750 mm) Central storage compartment for wooden planks 70 mm wooden planks for widening to 3,000 mm 2 pairs of stake pockets in the low bed, integrated in the floor longitudinal beams Lashing rings, low loader: 2 pairs of lashing rings on the neck, each 5 t 1 pair of lashing rings in the rear bevel 4 recessed lashing rings, placed centrally in the floor 2 pairs of key slot profiles in the driving lane, for longitudinal guide rails and as additional lashing points 6 pairs of lashing mushroom anchors in the low bed outer frame, each 10 t 5 pairs of stake pockets in the outer frame of the low bed 4 additional pairs of 10 t lashing rings: 1 on the neck 3 recessed in the floor of the low bed Drawbar coupling, turntable trailer: Drawbar with tested 50 mm towing eye Axles + suspension: Drum brake axles Parabolic spring suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization front and rear (rocker leveling) Wheels and tires: 235 / 75 R 17.5" Steel rims, twin arrangement, factory silver Brake system: 2-line air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front with connection lines for towing vehicle ABS and ALB, with ABS connector at front, with connection cable Attention: The towed trailer may only be pulled by towing vehicles that ensure proper function of the ABS! Floor: Neck area with steel/chequer plate flooring then 70 mm softwood floor, wheel recesses with steel/chequer plate flooring Rear bevel with 70 mm softwood floor Access ramps: Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable Timber surface Hydraulically operated via tractor PTO Operating instructions: For 10,000 kg axle load, a special permit is required, only indivisible loads permitted!!! Note! Overlength and excess width, special permanent approval required. For applications for special permits for heavy-duty transport, an axle load display is required for air-suspended vehicles! This applies to all deviations from § 34 StVZO (axle load and permissible gross weight exceedance) that require a special permit under § 70 StVZO. Iedpfsyxq A Hox Af Ajbb The declared gross weight is technically feasible; depending on the load, the gross vehicle weight may not be achievable while observing permissible axle, support, and saddle loads. (Poor driving and trailing behavior possible due to incorrect load distribution) These images are for reference only!

Stanje: rabljeno, Leto izdelave: 2022, Plus freight €4,000.00 and installation and commissioning €5,000.00. Sanding System B Sand 5 with Partial Rotator Operating Method: The panel is placed on the infeed table. It enters the partial rotator and is centered. It is sanded in the sanding unit, processed both in forward and return pass. The panel is rotated in the partial rotator. The second side of the panel is then sanded in the sanding machine. There are then two options: either the panel moves to the outfeed table and is unloaded, or it returns to the infeed table and is unloaded there (the second option increases processing time). Sanding Unit Configuration: - 1 upper sanding lamella roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm. - Cross brushes suitable for sanding cross-grain fibers. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW each (2 units). - 3 upper sanding discs to perfectly cut longitudinal and cross-oriented wood fibers. Power: 1.5 kW each; Diameter: 400 mm. - Disc brush for chamfering edges. The unit operates as a deep brush. Upon detection of the panel edges, it tracks the door edges. Power: 0.75 kW; Diameter: 250 mm. Ijdpfx Aevvkipjf Ajbb Machine Features: - The unique sanding system of this unit ensures perfect wood sanding and/or intermediate sanding of panels. - All tools are controlled by frequency inverters. - All brushes equipped with quick-release sanding strips; replacement does not require changing the hub. - The discs feature air jets for optimized cleaning and operating time. - Sanding wheels equipped with hook-and-loop fastening system. - Feed and rotation are controlled via PLC to prevent edge breaking of workpieces. - High-quality sanding on 4 sides thanks to the unit’s consistent material removal. - Automatic and rapid switching of processing units. - Constant pass-through height; PLC and industrial software enable integration into a finishing line. - Infinitely variable speed control of discs, brushes, and feed via state-of-the-art frequency inverters. - Reversible rotation (right/left) of discs and brushes with different abrasive grades. - Individually driven feed adjustments for discs, rollers, and belts. - Additional adjustment options of brushes and discs to compensate for abrasive wear and to allow variation of sanding pressure on surfaces. - Robust machine base made of steel tubing ensures maximum rigidity, stability, and flatness. - Milled upper machine bed for optimal parallelism of the working surface for the sanding discs. - All unit carriages are mounted on linear ball bearing guides, providing high load capacity and precision. - Motor-driven feed belt, frequency inverter controlled, 0.55 kW. - Machine doors equipped with safety devices. - Machine doors feature viewing windows for monitoring workpieces during operation. - Pressure rollers below the units, diameter 80 mm, rubber-coated, for secure workpiece hold during processing. - Low ongoing costs thanks to individual replacement of lamellae. - Low operating noise due to enclosed machine housing. - All units fitted with extraction hoods and relevant extraction ports; cover plate with suction connector. - Fully encapsulated housing for a clean operating environment.

Stanje: rabljeno, prevoženi kilometri: 10.560 km, vrsta prenosa: drugo, vrsta goriva: električni, barva: rdeča, skupna masa: 1.330 kg, lastna masa: 700 kg, največja dovoljena obremenitev: 150 kg, število sedežev: 1, prva registracija: 11/2015, emisijski razred: noben, vzmetenje: drugo, Leto izdelave: 2015, obratovalne ure: 10.560 h, voznikova kabina: drugo, gorivo: elektrika, Are you looking for a reliable tow tractor that delivers consistent performance even during daily continuous operation and noticeably increases the efficiency of your in-house logistics? Then this Linde P 60 Z is exactly the right workhorse for your business. This electric tow tractor stands for Linde’s proven quality and is designed to transport heavy loads reliably and under full control. It truly shines in industrial, warehouse, or manufacturing environments, where precise handling, high uptime, and robust engineering are essential. With 10,560 operating hours, this vehicle already boasts extensive practical experience and has been engineered specifically for demanding daily operations. First registered in November 2015, it features a modern yet proven generation, built for durability and cost-effectiveness. Its distinctive red exterior ensures excellent visibility in the workplace and emphasizes the professional appearance of this high-performance tractor. For decades, Linde has been synonymous with top-quality materials handling equipment characterized by reliability, stability, and minimal downtime. If you are seeking a robust and ready-to-use vehicle to optimize and reliably support your internal transport processes, the Linde P 60 Z is the ideal choice. This tow tractor doesn’t just move loads—it makes your entire material flow more efficient, day after day. Ijdpfxoyw Akas Af Ajbb Sale to businesses only (agriculture, freelancers, small and large enterprises) or for export. Subject to prior sale and errors excepted.