Sistem za brušenje plošč

Ecoline B Sand 5

Plus freight €4,000.00 and installation and commissioning €5,000.00.

Sanding System B Sand 5 with Partial Rotator

Operating Method:
The panel is placed on the infeed table. It enters the partial rotator and is centered. It is sanded in the sanding unit, processed both in forward and return pass. The panel is rotated in the partial rotator. The second side of the panel is then sanded in the sanding machine. There are then two options: either the panel moves to the outfeed table and is unloaded, or it returns to the infeed table and is unloaded there (the second option increases processing time).

Sanding Unit Configuration:
- 1 upper sanding lamella roller, suitable for surfaces. Power: 3 kW; Diameter: 420 mm; Length: 1300 mm.
- Cross brushes suitable for sanding cross-grain fibers. Diameter: 420 mm; Length: 300 mm. Power: 1.1 kW each (2 units).
- 3 upper sanding discs to perfectly cut longitudinal and cross-oriented wood fibers. Power: 1.5 kW each; Diameter: 400 mm.
- Disc brush for chamfering edges. The unit operates as a deep brush. Upon detection of the panel edges, it tracks the door edges. Power: 0.75 kW; Diameter: 250 mm.
Psdpfx Ajvvkiponporc

Machine Features:
- The unique sanding system of this unit ensures perfect wood sanding and/or intermediate sanding of panels.
- All tools are controlled by frequency inverters.
- All brushes equipped with quick-release sanding strips; replacement does not require changing the hub.
- The discs feature air jets for optimized cleaning and operating time.
- Sanding wheels equipped with hook-and-loop fastening system.
- Feed and rotation are controlled via PLC to prevent edge breaking of workpieces.
- High-quality sanding on 4 sides thanks to the unit’s consistent material removal.
- Automatic and rapid switching of processing units.
- Constant pass-through height; PLC and industrial software enable integration into a finishing line.
- Infinitely variable speed control of discs, brushes, and feed via state-of-the-art frequency inverters.
- Reversible rotation (right/left) of discs and brushes with different abrasive grades.
- Individually driven feed adjustments for discs, rollers, and belts.
- Additional adjustment options of brushes and discs to compensate for abrasive wear and to allow variation of sanding pressure on surfaces.
- Robust machine base made of steel tubing ensures maximum rigidity, stability, and flatness.
- Milled upper machine bed for optimal parallelism of the working surface for the sanding discs.
- All unit carriages are mounted on linear ball bearing guides, providing high load capacity and precision.
- Motor-driven feed belt, frequency inverter controlled, 0.55 kW.
- Machine doors equipped with safety devices.
- Machine doors feature viewing windows for monitoring workpieces during operation.
- Pressure rollers below the units, diameter 80 mm, rubber-coated, for secure workpiece hold during processing.
- Low ongoing costs thanks to individual replacement of lamellae.
- Low operating noise due to enclosed machine housing.
- All units fitted with extraction hoods and relevant extraction ports; cover plate with suction connector.
- Fully encapsulated housing for a clean operating environment.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.