Montažna linija za večkratne finger-joint spoje

GRECON Compact

Stanje: pripravljen za uporabo (rabljen), Brusilnik, ostrilo za tračne žage Bratstvo Lignum. Stroj je kompleten in tehnično brezhiben. Lahko je dodatno opremljen z valji za držanje tračnega lista. Cedpfx Agoxx Uxiotsha

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Chsdpjrigxysfx Agtea Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Leto izdelave: 2010, stanje: dober (rabljeno), 2250-mm pallet nailing line Semi-automatic nailing table Turner + (optional marker) Stacker (maximum 3000 mm) Cedpfjpy H Erex Agtsha Transfer

Leto izdelave: 2026, stanje: novo, VKM – Destacking System for Milled Timber Chedpfog Rxhgox Agtea With our solution for separating milled timber, whether loosely stacked or in bundles, pre-milled timber pieces can be efficiently processed further. Using a two-stage system, the timber pieces are separated and made available for downstream processing. It is also possible to feed the separated timber pieces into a continuous process in a controlled manner. The infeed mechanism is mechanically engineered to reliably feed even warped timber. Additionally, it can be adjusted for timber diameter to ensure that only one piece is conveyed at a time, preventing bottlenecks and stoppages further down the processing line.

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED LOADING STATION Vacuum system (with pump) No. 2 vertical support columns for the upper support beam No. 1 upper horizontal support beam (on which the carriage slides) Cedpfefi Tg Hsx Agtoha No. 1 motorized carriage with horizontal metal arms External roller conveyor (on the floor) for loading the stack of panels onto the loading station External motorized roller conveyor (for receiving panels from the loading station) Separate electrical control panel Perimeter safety fencing with safety mats Working capacity (cycles/min) approx. 16 Panel thickness (min/max) mm 10 / 50 (approx.) Min. panel dimensions mm 250 x 320 (approx.) Max. panel dimensions mm 1300 x 3000 (approx.) Total connected load kW 30

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.150 mm, skupna širina: 1.000 mm, skupna višina: 1.550 mm, vrsta vhodnega toka: trifazni, skupna masa: 700 kg, teža obdelovanca (maks.): 500 kg, vhodna napetost: 400 V, hitrost pomika os X: 30 m/min, širina transportnega traku: 400 mm, moč: 2 kW (2,72 KM), vhodna frekvenca: 50 Hz, SA250 or SA380 profile sanding machine for glazing bars, boards, beams and more. The SA380 brush sanding machine offers the following advantages: Cedpew Av Ivofx Agtsha 1. Flexible: Handles all profiles including beams up to 400mm wide and 260mm high 2. Mobile: Mounted on wheels and can optionally be equipped with a mobile extraction unit 3. Powerful: Automatic feed speed of 13–30 m/min ensures high throughput 4. Superior results: 8-axis system with flexible Fladder brushes delivers excellent finishing: 4 brushes sand WITH and 4 sand AGAINST the feed direction (4 sides, 2 per side) 5. Safe: Fully enclosed construction, requiring only a single 120mm extraction connection. The SA250 and SA380 models are extremely robust and manufactured entirely in Denmark. We currently have two demonstration machines in stock.

Stanje: dober (rabljeno), Leto izdelave: 2003, Automatic Hydraulic Gluing Press Kallesoe Type LV 7821 Chodpfx Agsrqzgkstea This press is used for gluing wooden elements, such as panels, with maximum dimensions of 7800 mm x 2100 mm. The gluing process is accelerated by warm water supplied to the press bed, which is kept in continuous circulation (it can be supplied from central heating or heated by built-in electric heaters on the press). Press heating power: 72 kW Maximum press output: up to 2000 m² / 7.5 hours Glue applicator with feed system for Kallesoe Press Type KL40 – designed for automatic glue application to each lamella and direct transfer to the LV7821 press.

Stanje: skoraj kot novo (rabljeno), Profile grinding machine Utma model P20 Chodpfx Agjff H E Rotja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Optimizing cross-cut saw from 2018. This WEINIG DIMTER Opticut S90 is equipped with a 500 mm saw blade diameter and a maximum cutting height of 120 mm. It is suitable for infeed lengths of 400 to 6,300 mm and widths of 20 to 300 mm. If you are looking for a high-quality cutting machine, consider the WEINIG DIMTER Opticut S90 we have for sale. Contact us for further details. • Saw Blade • Diameter: 500 mm • Bore: 30 mm • Adjustable saw blade speed: 40-100% via frequency converter • Workpiece Capacity • Infeed length (min/max): 400-6,300 mm • Width (min/max): 20-300 mm • Thickness (min/max): 10-120 mm • Maximum cutting height: 120 mm • Minimum cross-section: 20 x 10 mm • Maximum cross-section 1: 215 x 120 mm • Maximum cross-section 2: 300 x 40 mm • Permissible timber curvature: max. 2 mm/m or 8 mm over the entire length • Table tilt: 10° • Movement and Accuracy • Positioning speed (return stroke): max approx. 180 m/min • Positioning speed (forward stroke): max approx. 60 m/min • Positioning accuracy: +/- 0.1 mm • Motors and Power • Pusher motor power: 5.1 kW • Saw motor power: 7.5 kW • Total electrical power: approx. 15 kW • Control and Interface • Control unit: OptiCom Pro with 18.5" touchscreen • Display resolution: 1366 x 768 pixels • Degree of protection (front): IP65 • Interface: USB port and Ethernet network connection • Data format: CSV (ASCII) for import/export • Operating Resources and Environment • Voltage: 400 V / 50 Hz Cjdpfxeylmmmo Agtsha • Operating pressure: 6-8 bar (min.) • Air consumption: approx. 250 NL/min • Extraction nozzle: Diameter 125 mm • Required extraction performance: Speed approx. 30 m/s; Volume approx. 1,300 m³/h • Noise level (idle): ≤ 85 dBA

Stanje: rabljeno, Leto izdelave: 2007, premer vretena: 45 mm, število vreten: 6, Št. 3176 Strugalni in žlebni avtomat WEINIG Hydromat 1000 Rabljen, letnik 2007, stroj že razstavljen 6 vreten: spodaj – desno – levo – zgoraj – zgoraj – spodaj Elektronski pomik 6–60 m/min Chedpou Agh Sefx Agtoa Delovna širina 80–150 mm Delovna višina 23–65 mm Končna širina letev 4–15 mm Maks. število letev 16 kosov Dolžina letev 400–4000 mm 1. Vreteno horizontalno, spodaj Zavorni motor 11 kW, 6000 vrt/min Premer vretena 45 mm Krožni radij orodja 125–180 mm 2. Vreteno vertikalno, desno Zavorni motor 7,5 kW, 6000 vrt/min Premer 45 mm Krožni radij orodja 112–250 mm Maks. globina žleba 35 mm Hod nastavitve osno 80 mm 3. Vreteno vertikalno, levo 7,5 kW, 6000 vrt/min Premer 45 mm Krožni radij orodja 112–250 mm Maks. globina žleba 35 mm Hod nastavitve osno 80 mm Tlačna plošča pred vretenom, možnost odmaknitve, pnevmatični pritisk valja 4. Vreteno horizontalno, zgoraj 15 kW, 6000 vrt/min, premer 45 mm Krožni radij orodja 112–250 mm Maks. globina žleba 35 mm Hod nastavitve osno 45 mm Razdeljena tlačna plošča pred zgornjim vretenom, nastavljiva in možnost odmaknitve, pnevmatična 5. Vreteno horizontalno, zgoraj, kot žagnopilno vreteno Zavorni motor 37 kW, 5000 vrt/min Premer 45 mm Hod nastavitve osno, zmanjšan na 25 mm Krožni radij orodja 112–250 mm Maks. globina žaganja 35 mm Hod nastavitve osno 45 mm Razdeljena tlačna plošča pred zgornjim vretenom, nastavljiva in možnost odmaknitve, pnevmatična 6. Vreteno horizontalno, spodaj, kot žagnopilno vreteno Zavorni motor 30 kW, 5000 vrt/min Hod nastavitve osno, zmanjšan na 25 mm Premer 45 mm Krožni radij orodja 112–250 mm Maks. globina žaganja 35 mm Hod nastavitve osno 45 mm Vsa žlebna vretena z visokokakovostnimi ležaji Elektronski pomik 7,5 kW Hod nastavitve valjev glede na levo vreteno, osno 35 mm Skrajšana razdalja med valji glede na desna vretena Števec dolžine, električni, z 2 števcema Kratka vstopna miza (1,2 m) z 2 pogonjenima valjema nad mizo 1 pogonjen, nazobčen valj v mizi, stranski pritiskovalni valj Avtomatska črpalka za vosek/sredstvo za mazanje Stroj z 4-valjnim izmetom, nihajne gredi podaljšane na 200 mm 2 pogonjena, nazobčena valja v izmetni mizi 2 pogonjena, nazobčena valja v strojni mizi Tlačna palica pred zgornjim vretenom in odvod za zgornjim vretenom z mehanskim digitalnim prikazovalnikom DigiSet (digitalni dvojni prikazovalnik) za levo in zgornje vreteno Električna nastavitev višine zgornjih vreten in pomika Prodaja v imenu stranke, na lokaciji v bližini 39100 Bolzano (Italija), brez razstavljanja, brez transporta in montaže Razstavljanje, natovarjanje in transport možni po dogovoru Napaka v opisu in ceni pridržana Za izognitev možnim nesporazumom je predhodni ogled na lokaciji po dogovoru možen in priporočljiv Prodaja se v obstoječem stanju Tehnične specifikacije, opis stanja, leto izdelave in obseg dobave v skladu s prospektom proizvajalca oz. prejšnjega lastnika, brez jamstva Medtem se prodaja pridržana Pri rabljenih strojih je izključeno vsakršno jamstvo, velja: „kupljeno kot videno“ Slike in videoposnetki so namenjeni kot primer in ne predstavljajo dejanskega obsega dobave Pogoji plačila: Cene so brez DDV, plačilo pred prevzemom oz. pošiljko Pogoji dostave: na lokaciji