Sistem Za Odstranjevanje Napak nakup rabljenega (100.813)

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), A deburring system (deburring cell) for post-processing of metal workpieces using a fettling robot is available. Documentation is provided. On-site inspection is possible. Nedpowfg Huofx Abiewl

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Na voljo je robotski stroj za odstranjevanje srha Rausch. Višina vpenjanja: 1050 mm, hitrost vretena: 50000 obr/min, moč: 1 kW, max. debelina srha: 0,2 mm, max. premer obdelovanca: 500 mm, vrste zobnikov: ravni/spiralni/poševni, max. poševni kot: 40°, max. kot posnetja: 45°, max. dolžina obdelovanca nad vpenjalom: 450 mm, max. teža obdelovanca: 50 kg. Dimenzije stroja X/Y/Z: pribl. 2050 mm/1200 mm/2100 mm, teža: pribl. 1300 kg, obratovalne ure: 1271 h, uporabni čas: pribl. 8 h. Dokumentacija je na voljo. Ogled na lokaciji je možen. Nsdpsyxq Uisfx Abiswl

Leto izdelave: 1996, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Rabljena kompletna linija – pripravljena za obratovanje – ogled med delovanjem mogoč – popolnoma funkcionalna Nedpfszhui Hox Abiswl Naprodaj je popolna in popolnoma delujoča STEIMEL linija za transport in razoljevanje odrezkov, ki je trenutno še vedno v serijski proizvodnji. Linija je bila uporabljena izključno za transport in razoljevanje medeninastih odrezkov in se prodaja izključno zaradi modernizacije opreme. Gre za kontinuirno pretočno centrifugo. Posebna prednost za zainteresirane kupce: Linijo je mogoče pred izgradnjo ogledati med delovanjem. Na voljo so tehnične risbe in dokumentacija. Načrtovana demontaža je oktobra 2026. Linija je idealna za podjetja v strojni in kovinskopredelovalni industriji, ki iščejo zanesljivo in ekonomično rešitev za odstranjevanje odrezkov ter vračanje olja/hladilno-mazalnih sredstev. Tehnični podatki • Proizvajalec: STEIMEL • Tip: Kontinuirana pretočna linija tip K50 • Princip: Centrifugalni sistem • Leto izdelave: 1996 • Stanje: rabljeno, popolnoma funkcionalno, boben (glavni element) obnovljen in ponovno v uporabi od 06/2026 • Razpoložljivost: predvidoma od oktobra 2026 dalje • Lokacija: 73630 Remshalden, Nemčija • Odrezki: medenina (s svincem in brez svinca) • Zmogljivost: - 2.000 kg razoljenih odrezkov / 24 ur delovanja - dosežena preostala vlažnost med 1,8 % in 4 % glede na vrsto odrezkov - preostala vlažnost nastavljiva preko hitrosti vrtenja bobna ali hitrosti transportnega dvigala za odrezke - hkratno sprejemanje 8 vozičkov z odrezki: bunker za odrezke cca 800 l Obseg dobave • Popolna transportna linija za odrezke vključno z razoljevalno centrifugo • brez oljnega rezervoarja • obstoječe tehnične risbe in dokumentacija • EXW, pripravljeno na rampi Posebnosti • Linija je trenutno še vedno v uporabi • Funkcijski ogled v proizvodnih pogojih mogoč po predhodnem dogovoru • Robustna industrijska izvedba • Preverjena kakovost STEIMEL • Prednost ima prodaja v kompletu Linija je bila redno uporabljana v proizvodnji in je pripravljena na uporabo do demontaže. Zainteresirani kupci se lahko na lokaciji sami prepričajo o stanju in delovanju linije. Dodatne fotografije, tehnično dokumentacijo in risbe vam na zahtevo z veseljem pošljemo.

Stanje: dober (rabljeno), Leto izdelave: 2016, obratovalne ure: 715 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2530-01, delovna širina: 900 mm, Zaradi posodobitve strojev prodajamo naš skoraj nerabljen stroj Timesavers za mokro odstranjevanje robov. Stroj si je možno ogledati in ga preizkusiti, saj je priključen na elektriko. Za vprašanja smo vam na voljo. Njdpfsv Tnfisx Abijwl

Leto izdelave: 2003, stanje: rabljeno, Technical details: Workpiece length: 130 - 2000 mm Minimum diameter: Ø 10 mm Maximum diameter: Ø 60 mm Control system: Fagor 10/102 S Machine dimensions approx. LxWxH: 3.8 x 3.8 x 1.9 m Control cabinet dimensions LxWxH: 1.2 x 0.6 x 2.2 m Nwsdpfx Abeu Ngc Nsisl Machine weight approx.: 4,500 kg CNC milling and deburring machine for both ends of tubes or round steel. - Material feed via conveyor belt, travel length approx. 3,300 mm - Brush unit type PGAS 8/100 V-HV on both sides/opposed, speed 10,000 rpm (driven by compressed air) - Milling cutter holders, both sides/opposed - Milling spindle and brush holder arranged in sequence - Operation via control panel on the control cabinet Supports: - 2 units: 1x movable, 1x fixed - Lateral adjustment of right support: length 1,725 mm manually - Working strokes: cross = 5-50 mm; longitudinal = 5-50 mm - Working spindle: max. speed 320 rpm.

Leto izdelave: 1989, stanje: zelo dobro (rabljeno), Stock number:     2939 Manufacturer:     Held Year of manufacture:     1989 Machine number:     3356 Type / Model:     E90 Workpiece support surfaces:     800 x 50 mm Speed:     8,400 rpm Power connection:     1.1 kW Accessories/Equipment:      Condition:     good Nwedpfxju Un N Eo Abiol Weight:     approx. 0.1 t Footprint:     550 x 500 mm Dimensions:     1,000 x 500 x 1,000 mm

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap Nsdpfx Aet Hw Iiebiswl brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Leto izdelave: 1995, stanje: rabljeno, Diameter 0 mm Workpiece length 1000 mm Workpiece width 875 mm CNC deburring cell, with 2 pallets / 10 WW / 510 - 5 axes Nodpst Hwu Nofx Abijwl CNC - SIEMENS 510 controlled flexible brushing and deburring center

Stanje: novo, Stanje: novo Dobavni rok: približno 10 tednov od oddaje naročila Država izvora: Italija Cena: 13.600 € Mesečni obrok ob finančnem lizingu: 261,12 € Delovna širina: 1300 mm Obseg debeline pločevine – jeklo: 150 mm Premer krtače: 150 mm Obseg vakuuma: 250 x 350 mm Višina mize: 945 mm Motor: 0,75 kW Dolžina: 1400 mm Širina: 1000 mm Višina: 1450 mm Teža: 300 kg Easy T je ročno upravljani stroj za odstranjevanje ostrih robov, ki je primeren za različne procese obdelave kovin, kot so brušenje, odstranjevanje ostrih robov, zaobljanje robov in poliranje različnih vrst materialov – nerjaveče jeklo, jeklo, baker, medenina in aluminij. Brušna glava z dvema vrtljivima orodjema (brušni disk ali krtača) je nameščena na vrtljivem ročnem nosilcu. Nodpowiryhefx Abiewl Easy T je opremljen s prosto nastavljivo hitrostjo in vakuumskim sistemom, tako da se obdelovanci pritrdijo na mizo. To je stroškovno učinkovita in učinkovita rešitev za tradicionalno brušenje in odstranjevanje ostrih robov. Vse robove obdelovanca je mogoče obdelati iz vseh kotov in smeri. Brušna glava je vrtljiva za 180 ° in omogoča hitro zamenjavo brusnega orodja. Lastnosti: * Brušni tlak se izvaja ročno. * Enostavno upravljanje, nizki stroški. Segmentna krtača zagotavlja zaobljanje robov obdelovanca. Standardne krtače imajo premer 150 mm. Za odstranjevanje ostrih robov izdelka se uporablja podporna plošča z brušnim diskom. Odvisno od višine in trdote ostrega roba lahko brusni disk nastavite pod rahlim kotom, da izvajate večji pritisk na oster rob.

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), A deburring machine with extraction system is available. Passage width: 1000 mm, sheet thickness: 20 mm, minimum sheet size X/Y: 150 mm/100 mm, sound power level: 82 dB(A), feed rate: 4 m/min, dimensions X/Y/Z: approx. 2200 mm/1500 mm/1500 mm, weight: approx. 1600 kg, operating hours: 7152 h. Includes P. Ries 330 D Lissmac extraction unit, year of manufacture: 2007, filter area: 10 m², air volume: 3300 m³/h, negative pressure: 33 mbar. Documentation available. Nodpfx Abjtul N Doijwl

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Rated power: 8 kW, weight: 2.2 t, with control cabinet. Njdpjilht Ujfx Abiowl

Stanje: novo, Čopiči – premer Ø 250 mm Širina čopiča 80,0 mm Območje vrtljajev 1450 vrt/min Premer luknje Ø 24,0 mm Debelina žice 0,3 mm Premer odtočnega priključka 50,0 mm Delovna napetost 400 voltov Moč motorja približno 3,0 kW Teža stroja približno 90,0 kg Dimenzije (D-Š-V) 820 x 450 x 1140 mm Stroj za brušenje in odstranjevanje ostrih robov BES 250 D je idealen za odstranjevanje ostrih robov na notranjih in zunanjih robovih profilov in ploščatih materialov. Zaradi zmogljivega pogonskega motorja in robustne konstrukcije je ta stroj optimalen za profesionalno uporabo v delavnicah. Lastnosti izdelka - Kroglični ležaji rotorja zagotavljajo nizko raven hrupa in dolgo življenjsko dobo - Idealen za odstranjevanje ostrih robov na rezanih robovih, odstranjevanje rje z metalnih površin, - odstranjevanje barv,... - Serijsko opremljen z odtočnim priključkom s premerom 50 mm za priključitev sistema za sesanje - zmogljiv in tih pogonski motor - nizka raven vibracij zahvaljujoč stabilnemu ohišju stroja, ki je odporno proti torzijam - robustna izvedba in kakovostna oprema * idealen za komercialno oziroma industrijsko uporabo Nwedpfx Aboz D Itzsijl Obseg dobave - Čopiči s spiralno žico - Nastavljiva opora za obdelovance - Podstoj

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, delovna širina: 600 mm, vhodna napetost: 400 V, skupna masa: 3.560 kg, višina obdelovanca (maks.): 170 mm, The fast deburring machine for deburring, edge rounding, and finishing steel parts up to 600 mm in width. This deburring and finishing machine from Q-Fin has been specifically developed for applying a large radius of up to 2 mm to steel sheet components. With the SER600 Super Edge Rounder from Q-Fin, you can deburr, grind, edge break, round, deslag, remove oxide layers, or perform linear finishing on sheet metal parts up to 600 mm wide. A combination of these operations is also possible. The throughput capacity of the SER600 is 3 to 5 times higher than that of comparable machines. This new 2025 model comes equipped with a magnetic support, making it ideal for processing flame-cut steel parts and other magnetic materials. The machine features 5 processing stations. It is operated easily via the HMI touchscreen panel located at the front of the machine. The first station of the SER600 consists of a grinding unit. The abrasive belt in this unit removes burrs and/or burn marks from the product surface. If there are no burrs, the abrasive belt can be omitted or removed. It is also possible to process your product with a finer abrasive belt or finish with a Scotch-Brite belt. The second and third stations feature a disc brush unit with 4 oscillating disc brushes. The fourth and fifth stations consist of 2 round brushes rotating in opposite directions (left and right). The brushes break the sharp edges of the product or, thanks to the unique combination of two brush systems, can round edges up to a radius of R=3 mm. With special brushes installed, the SER600 with magnetic system can also efficiently remove oxide layers from steel products or slag from plasma-cut parts. We offer the combination with a WES6000 wet grinding dust extraction system as the 'SER600 Set.' The WES6000 was developed by Q-Fin to safely extract grinding dust without loss of suction. This fully stainless-steel extraction system operates wet, removing grinding dust from stainless steel, mild steel, and aluminum, thereby eliminating fire and explosion hazards. According to Q-Fin, this is the safest, simplest, and most sustainable solution for extracting grinding dust. The WES6000 ensures there is no grinding dust in the air and/or the work environment. Currently, we have 2 units of the SER600 in stock: 1x new (year of manufacture 2025) 1x very slightly used, like new (year of manufacture 2024) The machines can be inspected by appointment in Bergeijk. Both machines come with a 1-year warranty on the frame and all non-wear parts. We can also offer on-site installation of the SER600 + WES6000, including operator training. Njdol Dw D Ejpfx Abiowl - SER600 electrical connection: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Stanje: dober (rabljeno), Leto izdelave: 2011, Edges and contours - Deburring machine ROLEI Type: 00645-KKE2, year 2011. Nodpfjwnpflox Abijwl

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: Nwodjt Hw Shopfx Abiel 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Leto izdelave: 2025, Available from stock! Deburring and fine grinding machine with 3 working stations: Abrasive belt – Brush station – Abrasive belt Effective maximum working width: 1150mm Standard workpiece thickness: 0.8 – 150mm Nsdopwh Tfopfx Abijwl Digital workpiece thickness display on the control panel, accuracy 0.1mm Adjustable pressure rollers before and after the working stations Abrasive belt insertion on the left Abrasive belt centering by electronically controlled photo cell, emergency stop in case of tracking error or belt breakage Infinitely variable conveyor feed speed Includes the following options: Preparation of machine base for forklift loading Extraction collector in galvanized sheet metal for machine with 3 working units plus 1 external unit Vacuum device to increase the adhesion of small or slippery workpieces on the feed belt. Includes perforated feed table and belt, as well as a high-performance electric fan and sound-insulated outlet in accordance with CE standard, 5.5kW 2x Grit-Set for electronic fine positioning of the contact rollers Adjustment and display (0.01mm) on the operator panel, stand-by position with pneumatic return of the contact roller in case of emergency stop Frequency controlled drive motors for abrasive belt cutting speed, motor power per unit: 11kW Electronic adjustment of the brush unit HMI Vision – PLC control with visualization of various machine settings via color touch screen Storage capacity of up to 250 grinding programs

Leto izdelave: 2015, stanje: dober (rabljeno), Deburring machine, used Manufacturer: NS Maquinas Industrial Model: DM 1600 DC Year of manufacture: 2015 Working width: 1600 mm Minimum part size: 50x50 mm Power: 8 kW Number of cross-belt stations: 1 Njdsikm Tkepfx Abiowl Cross-belt speed: 2–8 mm/s Feed speed: 0.6–3.2 mm/s Extraction unit: Donaldson Performs edge rounding and removes sharp edges on both external and internal contours of parts made from stainless steel, steel, or aluminum, which have been cut by a laser, shear, or punching machine. Dimensions: 2730x1740x1940 mm Weight: 1790 kg.

Stanje: rabljeno, Leto izdelave: 2008, Working Width / mm Workpiece Height / mm Workpiece Thickness: 1-70 mm Minimum Workpiece Length: 350 mm Njdpfxsinwwzj Abiewl Minimum Workpiece Length with Magnetic or Vacuum Conveyor: 80 mm Band Filter Unit Volume Ab=900 approx. 350 l Band Filter Unit Volume Ab=1400 approx. 400 l Constant Working Height 1000 mm Feed Speed 2/4 m/min Feed Speed, stepless adjustment: 1.5-8 m/min Operating Voltage 400 VAC Control Voltage 24 V DC, 230 VAC Frequency 50 Hz Compressed Air Connection R 3/8" Minimum Compressed Air Pressure 5 bar Minimum Compressed Air Volume EMSN II +2F 10 NI/min Minimum Compressed Air Volume EMSN II /L +2F 80 NI/min Total Electrical Connection See Layout Plan Machine Weight, Working Width 900 mm approx. 4200 kg Machine Weight, Working Width 1400 mm approx. 5100 kg Machine Weight, Working Width 1540 mm approx. 5600 kg Abrasive Belt Dimensions, Sanding Drum AB=900: 1540 mm length x 900 mm width Abrasive Belt Dimensions, Sanding Drum AB=1400: 1540 mm length x 1400 mm width Abrasive Belt Dimensions, Sanding Drum AB=1540: 1540 mm length x 1540 mm width 5. Technical Description The machine operates using a wet grinding process and may only be used with a suitable grinding emulsion. A band filter system is responsible for filtering grinding dust out of the emulsion. The machine is equipped with an elastic grinding drum, which is used for regrinding and burr removal. Two counter-rotating flap brush rollers or, alternatively, stainless steel brush rollers are then used for edge rounding. Two subsequent spring steel brushes are used to remove oxide layers from the cut surfaces. Within the machine, pressure rollers hold the workpieces down on the continuous conveyor belt to ensure they remain in position during the grinding process, which determines the minimum workpiece length of 350 mm. At the machine's outlet, there is an integrated drying unit that dries the workpieces before they exit the machine. The machine is fitted with a continuous conveyor belt for workpiece transport. Special configurations may include an integrated vacuum extraction unit or magnetic conveyor, making it possible to process smaller workpieces. For non-magnetic small parts, a minimum length of 80 mm with a minimum area of 200 cm², and for magnetic small parts, a minimum length of 80 mm with a minimum area of 40 cm² is required. All grinding and brush elements are equipped with spray tube nozzles, which continuously spray the tools with emulsion, enabling the processing of aluminum and its alloys. The grinding residue is carried by the emulsion to the band filter unit and captured by an appropriate filter fleece. ERNST Automatic Sheet Metal Deburring Machine with Wet Grinding System Type EM 5 N/II/L + 2 F 1400 Year of Manufacture 2008 Factory No. 780063 Machine/Equipment: Sheet metal deburring machine with wet grinding system for stamped, laser-cut, and nibble parts of various materials, featuring a flexible sanding drum and two flap brushes for especially high edge rounding.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.100 mm, moč: 19 kW (25,83 KM), DM1100 DC EVO Odstranjevanje trdne žlindre Zaobljanje robov do širine 1100 mm. DM1100 DC EVO odstranjuje ostrine in zaobluje notranje in zunanje konture debelih jeklenih delov, ki so bili večinoma izrezani s plazmo ali plamenom. DM1100 DC je opremljen z velikim valjem za odstranjevanje ostrih robov in dvema protismerno vrtečima se prečnima pasovoma. Ti zagotavljajo zaobljanje robov z enakomernimi in mehkejšimi robovi. Ta stroj izstopa zaradi vertikalno premikajočega se brusilnega valja za izravnavo toleranc ter širokega magnetnega območja, ki omogoča varno obdelavo tudi majhnih delov. DM1100 DC Delovna zmogljivost (mm) 1100x120 Število brusilnih valjev (D) 1 Število postaj s prečnim pasom (C) 1 Specifikacije brusilnih valjev Ø435mm 20SH Dimenzije brusilnega pasu (mm) 1150x1520 Hitrost brusilnega valja (vrt./min.) 185-650 Hitrost prečnega pasu (m/s) 2-8 Hitrost podajanja (m/s) 0,5-4,0 Motor brusilnega valja (kW) 11 Nwedpfotzkg Usx Abisl Motor prečnega pasu (kW) (2x) 3 Motor za podajanje (kW) 0,37 Skupna moč (kW) 19 Priključek za sesanje prahu na glavo (Ø mm) (2x) 150 Dimenzije (mm) 2258x2900x2220 Teža (kg) 4100

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheets / Flat Material, New The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. Thanks to its fixed working height, the machine can be seamlessly integrated into a production line and is suitable for processing large workpieces. Working width: 650 – 1650 mm Maximum workpiece weight: 2000 kg Wide belt with sanding belt length: 3250 mm Comes standard with a vacuum holding system; optionally available with a magnetic holding system. By using sanding belts with a length of 3250 mm, you achieve an even, smooth surface and reduce consumable costs, as these belts have a longer service life. The modular design of the system allows us to offer the optimal configuration for the customer’s machining requirements. Njdpfx Abjnah Tasijwl The machine frame can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for more information and images via email (at) or

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large components. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt length: 2620 mm Equipped as standard with a vacuum holding system, optionally with a magnetic holding system The use of 2620 mm long abrasive belts ensures a consistently smooth surface finish and reduces consumable costs due to the belts' longer lifespan. Thanks to the modular design of the machine, the optimal configuration for the customer's processing requirements can be offered. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine frame and feed table, in combination with advanced mechanics and electronics, make this series a universal machining center for deburring and final finishing. Please contact us for further information and images via email (at) or Nedpjnah Tdsfx Abiswl *

Stanje: novo, Leto izdelave: 2024, Delovna širina: 380 mm Delovna višina: 150 mm 1. Sklop, rotorska skupina: Skupina 5 nihajnih rotorskih ščetk, Ø 115 mm, vsaka z motorjem 3 kW 2. Sklop, ščetka: Scotch Brite Hard / premer 210 mm, variabilni pogon Nastavitev višine: ročni ročaj Prikaz višine: mehanski števec Hitrost podajanja: 4 - 12 m/min Nwedstnf Rrepfx Abisl Moč pogonskega motorja: 0,37 kW Vakuumska preproga: da Dolžina stroja: 1400 mm Širina stroja: 900 mm Teža: 500 kg

Stanje: rabljeno, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining center for deburring, deslagging, derusting, oxide layer removal, edge rounding, fine grinding, and even polishing of metal surfaces. Working height: adjustable from 0.5 mm to 150 mm Working width: 1150 mm Maximum part weight: 300 kg Wide belt with abrasive belt length: 2200 mm Supplied as standard with vacuum holding system, optionally with magnetic holding system Thanks to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. Nwedpfxsm Nlm Dj Abiel The machine structure can accommodate up to 3 internal processing units and one additional external processing unit. Please contact us for further information and images via email (at) or

Stanje: rabljeno, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and even polishing of metal surfaces. Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt length: 2620 mm Standard with vacuum holding system, optional with magnetic holding system Nodpfx Abem Rpy Roijwl The use of 2620 mm long abrasive belts provides a consistently smooth surface and reduces consumable costs, as the belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's processing task. The machine structure can accommodate up to 3 internal processing units and an additional external processing unit. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for further information and photos via mail(at) or

Stanje: dober (rabljeno), Leto izdelave: 1985, številka stroja/vozila: 2.309.044, Offer 23195 Precision Deburring and Chamfer Milling Machine / Edge Milling Machine Technical specifications: - Suitable for processing steel, stainless steel, aluminium, and plastics - Deburring and chamfering process performed with milling cutter - Chamfer angle: 45° - Chamfer width: steplessly adjustable - Guide rail length: 500 mm Nedpsnvdtcofx Abiowl - Working height: 750 mm - Spindle speed: 2750 rpm - Drive: 400 V / 0.7 kW - Required floor space: approx. W 500 x D 400 x H 850 mm - Weight: approx. 30 kg