Pulveranlage Linija Za Prašno Lakiranje Je Končana nakup rabljenega (95.874)

Stanje: novo, Leto izdelave: 2025, Powder Coating – The perfect layer for lasting protection. Powder coating is a highly effective and widely adopted method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring uniform adhesion to the surface and forming an even coating. To achieve optimum adhesion and durability, the substrate is thoroughly cleaned and prepared beforehand. Oils, dirt, and other contaminants are removed to ensure a clean surface. This step is essential to ensure effective bonding of the powder with the substrate, resulting in a robust and long-lasting coating. A typical powder coating system consists of several components and devices required for the application and curing of powder coatings. Lhjdpfswf Dpgjx Ac Uok Powder spray booth and spray area The booth provides a controlled environment for the application process and ensures uniform powder distribution. Powder coating gun A powder coating gun is used to apply the powder coating to the workpiece. Powder supply system The powder supply system comprises a hopper or container for storing the coating material. It typically includes equipment such as powder pumps, feed hoses, and powder sieves to convey powder from storage to the spray gun. Pretreatment equipment Pretreatment systems prepare the substrate prior to powder coating application. This may involve processes such as cleaning, degreasing, rinsing, and surface treatment to ensure optimal adhesion and durability of the finish. Curing oven A curing oven is a vital component of a powder coating plant. It is used to heat the coated substrate to the appropriate temperature, allowing the powder coating to melt, flow, and cure into a durable surface. The oven commonly features a conveyor or racks to transport coated parts through the curing chamber. Exhaust system An extraction system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, Stroj je bil zelo malo uporabljan. Lhedpfx Aezr Iz Rec Uek

Leto izdelave: 2014, stanje: rabljeno, Rabljena linija za prašno lakiranje. Zaustavljena leta 2024. - Mešalnik za posode Mixaco, tip CM1000-MT, s 4 x inox rezervoar 800 litrov, letnik 2014 - Ekstruder Coperion, ZSK 43 MV, letnik 2014 - SBS hladilni transporter, širina 800 mm x dolžina 5000 mm Lhjdpovxrm Uofx Ac Uek - Mlin Hosokawa Alpine, tip ACM40 EC CL, letnik 2014 - Dozirna naprava Gericke, tip GL D 7, letnik 2014 - Naprava za podajanje Hosokawa, letnik 2014 - Tlačni filter Hosokawa Alpine, letnik 2014 - Inox ciklon, premer 500 mm - 2x rotirno sito AZO, tip E 240 - Žepni filter s 45 kW električnim motorjem - Hladilna enota Climaveneta, tip NX/K 0914P - Hladilna enota Climaveneta, tip NX/K 0552P

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 43.000 mm, skupna višina: 3.800 mm, skupna širina: 20.000 mm, vrsta vhodnega toka: trifazni, teža obdelovanca (maks.): 200 kg, priključek za stisnjen zrak: 9 letvica, višina obdelovanca (maks.): 2.400 mm, dolžina obdelovanca (maks.): 7.200 mm, We are offering this BEWAP MACRO 6 POWDER COATING MACHINE Complete 7.2m Powder Coating Line, year of manufacture 2015, in excellent condition. Full set for surface treatment, including 2 powder coating booths and 2 curing ovens for powder coating. The equipment is in perfect working order. Year 2015. Surface treatment cabin (In 316 L stainless steel, membrane spray pumps, dosing pumps, stainless steel pickling tanks with immersion heaters and rinsing tanks, effluent tank, ED tank, dosing pumps, reverse osmosis system, water softener) Drying oven (Gas burner, control cabinet) 2 manual powder coating booths with automatic feed and extraction system Curing oven (Gas burner, control cabinet) Structure with manual overhead conveyor: 3 transfer trolleys with 3 lifting beams each (200kg per beam) 2 lifting stations for loading and unloading 36 lifting beams Operation with 3 beams simultaneously Compatible with Qualicoat and Qualilaquage certification Maximum part dimensions per lifting beam: Maximum length: 7200mm Maximum height: 2400mm Maximum width: 500mm (option for 1000mm width configuration) To be disassembled and removed on site Price: €150,000 excl. VAT Lhedpfx Acoyc S Hts Ujk If you have any questions or need further information, please feel free to send us a message or call us. Viewing is possible.

Stanje: novo, Leto izdelave: 2025, SISTEM ZA PRAŠNO BARVANJE AVTOMOBILSKIH PLATIŠČ IN PLATIŠČ Peč sprejme 4 kose 22’’ platišč v eni seriji KOMPONENTE NAPRAVE: * POLIMERIZACIJSKA PEČ 1,5x1x1,3m, ELEKTRIČNA 18KW * ENOSTRANSKA PRAŠNA KABINA VFK-2 * VISEČI TRANSPORTER IN NAKLADALNI VOZIČKI Dostava: 6-8 tednov EXW tovarna Istanbul Montaža in usposabljanje vključena Nudimo najboljše tehnične rešitve in konkurenčne cene Za več informacij in ponudbe nas kontaktirajte Lhedpfx Acsvv Rfds Uek

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 800 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 1.400 mm, skupna višina: 2.300 mm, skupna širina: 250 mm, teža obdelovanca (maks.): 72 kg, Müüa peaaegu uus automaatne pulbervärvimisliin, paigaldatud 2023. aastal, töötatud ca 800 tundi. Paigaldusala vastavalt olemasolevale paigutusele: ca 12 x 28 m, kõrgus 5 m. Hind ja demonteerimise tähtaeg sõltuvad individuaalsetest kokkulepetest. Paigutusskeemi saab muuta – võimalik lisada eelpuhastustunelle ja ahju ehitada sirge tunnelina kuni 6+ m detailide jaoks. Võimalik pakkuda kogu liini hinnaga koos demontaaži ja transpordiga teise riiki vastavalt kokkuleppele. Suurepärane võimalus soetada praktiliselt uus liin soodsama hinna ja kiirema tarnega võrreldes uuega. Monorels-konveier: - kiirus 0,9–3,3 m/min - automaatne määrimine - automaatne pingutusüksus - ahela samm 270 mm - kogupikkus 131 m - kogukoormus 9500 kg - terasest toed põrandal-konveieri vahel Automaatne pulbervärvimise kabiin Gema: - PVC kabiin MagicCompact EquiFlow BA04 - MagicControl 4.0 juhtpaneel - fototakistusega raam püstolite juhtimiseks - 16 x OptiGun GA03-P automaatvärvipüstol - 1 x OptiSelect GM04 käsipüstol - 17 OptiSpray AP01.1 värvipihustuspumpa - OptiCenter OC07 pulbervarustussüsteem - Ultrasonic sieve US07 OptiCenterile - 2 tk ZA07-23 reciprocatorit automaatse X-telje juhtimisega - MonoCyclone EZ05-16, 16 000 m3/h - Pulberfilter 16 000 m3/h, 30 kW - Big-Bag süsteem jäätmepulbri jaoks - CO2 plahvatuskaitsesüsteem - Manuaalse pritsseinaga / käruühik piltidel EI KUULU KOMPLEKTI Pulbervärvi kuivatusahi: - Hübriidküte – võimalik kasutada nii elektrit kui gaasi! Haruldane paindlikkus valida soodsama energiaallika vahel. Lhedpfx Acsx H Tads Uok - Paigaldatud võimsus 300 kW - Maks. temperatuur 220°C - Siemens PLC juhtpaneel

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, vhodna napetost: 220 V, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, S pištolo je bilo opravljeno zelo malo dela. Ljdpfx Aozr I Scjc Uehk

Stanje: novo, Leto izdelave: 2025, A typical coating system consists of surface pretreatment (cleaning and/or application of a conversion layer), intermediate drying, electrostatic coating zone (booth/manual powder application unit), and dryer (curing oven). The workpieces are transported through the system by a conveyor system. Our company ROMER® designs, manufactures, and installs complete powder coating lines. Lsdpfx Acscv Nl Rj Ujhk Our systems can be inspected and tested in Hürth near Cologne. Request a quote for a system tailored to your specific application.

Stanje: novo, SAPI Praškasto Barvanje Popolna prevleka za dolgo zaščito. Praškasto barvanje je zelo učinkovita in široko uporabljena metoda za nanašanje zaščitne in dekorativne površine na različne vrste substratov. Gre za suhi postopek, pri katerem se fina prah, sestavljena iz smol, pigmentov in dodatkov, nanese na substrat. Prah je elektrostatično napolnjen, zato se enakomerno oprime površine in ustvari enakomerno prevleko. Za dosego optimalne oprijemljivosti in trajnosti se substrat najprej temeljito očisti in pripravi. Olja, umazanija in druge nečistoče se odstranijo, da se zagotovi čista površina. To je ključnega pomena, da se prah učinkovito poveže s substratom in ustvari trdno in dolgo obstojno prevleko. Komponente Praškastega Barvnega Sistema Tipičen sistem praškastega barvanja je sestavljen iz več komponent in naprav, potrebnih za nanašanje in strjevanje praškaste prevleke. Kabina za Pršenje in Območje Pršenja Kabina zagotavlja čisto okolje za postopek nanašanja in zagotavlja enakomerno porazdelitev praška. 🎨 Pištola za Praškasto Barvanje Pištola za praškasto barvanje se uporablja za nanašanje praškaste prevleke na delovni kos. 💨 Sistem za Napajanje s Praškom Sistem za napajanje s praškom je sestavljen iz lijaka ali posode, v kateri je shranjen material za praškasto barvanje. Običajno vključuje naprave, kot so črpalke za prah, dovodne cevi in sita, ki prah prenašajo iz skladišča do pištole za pršenje. 🔄 Napravite za Predobdelavo Sistemi za predobdelavo se uporabljajo za pripravo substrata pred nanašanjem praškaste prevleke. To lahko vključuje postopke, kot so čiščenje, razmaščevanje, izpiranje in obdelava površine, da se zagotovi dobra oprijemljivost in trajnost prevleke. 🧼 Peč za Strjevanje Peč za strjevanje je ključna komponenta praškastega barvnega sistema. Uporablja se za segrevanje prevlečenega substrata na ustrezno temperaturo, da se prah stopi, tekoče preide in strdi v trajno površino. Peč običajno vključuje sistem za transport ali police, ki prenašajo prevlečene dele skozi peč. 🔥 Sistem za Odsesavanje V sistemu je nameščen sistem za odsesavanje, ki odstranjuje odvečni prah, pare ali hlapne spojine, ki nastanejo med postopkom nanašanja prevleke. Pomaga pri ohranjanju čistega in varnega delovnega okolja za osebje in preprečuje kopičenje prahovih delcev v zraku. 🌬️ Iščete rešitev za Praškasto Barvanje? Iščete prilagojeno rešitev za praškasto barvanje? Specializirani smo za zagotavljanje rešitev za praškasto barvanje, ki so prilagojene vašim specifičnim potrebam. Ne glede na to, ali imate specifične zahteve glede barve, kompleksnih zasnov ali težkih substratov, je naš izkušen tim pripravljen zagotoviti izjemne rezultate. 💡 Kontaktirajte nas še danes, da se pogovorimo o vaših potrebah in nam dovolite, da razvijemo prilagojeno rešitev za praškasto barvanje. 📞 Ledpjun Sd Uefx Ac Ujhk Kontaktirajte nas še danes!

Stanje: rabljeno, Paint roller machine, roller coating machine, powder coating system - Powder coating system: used for the production of slats/blinds - Pneumatic components: manufacturer Festo - Gear motor: WEG 0.25 kW Lhedpfjgal Anjx Ac Ujk - Dimensions: 3400/850/H1935 mm - Weight: 746 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna višina: 2.593 mm, skupna širina: 2.700 mm, vrsta vhodnega toka: trifazni, trajanje garancije: 24 meseci, moč: 6 kW (8,16 KM), vhodna napetost: 400 V, priključek za stisnjen zrak: 6 letvica, volumenski pretok: 15.000 m³/h, filtrirna površina: 45 m², najv. debelina jeklene pločevine: 2 mm, Visoko učinkovita kabina za prašno lakiranje "HELSINKI" / Kabina za vračanje prahu / Enota za ekstrakcijo prahu Industrijska kabina za prašno lakiranje z visoko učinkovitim sistemom za vračanje prahu, nemško IE5 tehnologijo ventilatorjev, avtomatskim pulznim čiščenjem filtrov in nastavljivim pretokom zraka. Zasnovana za profesionalne prašne lakirnice, ki zahtevajo zanesljivo zračno zmogljivost, učinkovito vračanje prahu, minimalno vzdrževanje ter robustno industrijsko konstrukcijo. Tehnični podatki Moč: 6 kW Električni priklop: 3-fazni, 380–400 V, 50 Hz Potreba po stisnjenem zraku: 5–6 bar, čist stisnjen zrak Kapaciteta pretoka zraka: do 15.000 m³/h (nastavljiv pretok) Ventilator: Nemški visoko učinkoviti IE5 ventilator z aluminijastim rotorjem Filtrirni sistem: 3 x antistatični poliestrski kartušni filtri Filtrirni medij: 260 g/m² poliester s Teflonom + aluminijasto prevleko Konstrukcija: 2 mm jeklo, prašno barvano Mobilnost: industrijska zaklepna kolesa Priključki za stisnjen zrak: da Avtomatsko čiščenje filtrov: da (pulzno) Dodatna varnostna filtracija na izhodu: da Nosilec za dodatke / stojalo za cevi: da Glavne prednosti: Visoko učinkovito vračanje prahu Avtomatsko pulzno čiščenje kartuš Posebne večtočkovne čistilne šobe za učinkovitejše čiščenje filtrov Antistatičen filtrirni medij preprečuje lepljenje prašnih delcev Zmanjšuje akumulacijo statične elektrike Lažje čiščenje in daljša življenjska doba filtrov Nastavljiv pretok zraka glede na proizvodne zahteve Energijsko učinkovita IE5 tehnologija ventilatorjev Dodatna filtracija na izhodu za varnejše delovanje Priključki za stisnjen zrak za pištole in dodatke Robustna industrijska konstrukcija Mobilna zasnova za prilagodljivo postavitev delavnice Dimenzije: Širina: 2700 mm Globina: 1608 mm Višina: 2593 mm Ljdpfx Acjy N Ubzj Ujhk Primerno za: Delavnice za prašno lakiranje Obdelavo kovin Jeklene konstrukcije Lakiranje aluminijastih delov Industrijske lakirne linije Individualno lakirsko proizvodnjo Proizvajalec: Brigas Industries OY Lokacija: Finska Stanje: Novo IŠČEMO DISTRIBUTERJE

Stanje: zelo dobro (rabljeno), Kompletna linija neposredno od stečajnega podjetja, ki je polnila kapsule in tablete v manjše lončke. Stekleničke se nalagajo na linijo s pomočjo vrtljive mize (lazy susan), izdelek se prešteje in odmeri v lonček ali stekleničko, ki se nato zatesni z aluminijasto folijo, preden se privije navojni pokrov. Vsi stroji so bili kupljeni novi leta 2015 in so videti v odličnem stanju. Števec je Vitacount 12-1. Ljdpfxsw Hz T Es Ac Uohk

Stanje: novo, Leto izdelave: 2025, Cene sušilnih peči, prikazanih na fotografijah, se razlikujejo glede na velikost, konfiguracijo in dodatno opremo. 💡📏⚙️ V podjetju ROMER izdelujemo tako standardne modele kot popolnoma prilagojene rešitve, zasnovane glede na vaše tehnološke zahteve. 🏭✅ Sporočite nam dimenzije vaših kosov, kapaciteto linije, profil utrjevanja in razpoložljiv prostor – pripravili bomo najboljšo rešitev in možnosti, ki resnično izboljšajo vsakodnevno učinkovitost. 🔥🎯 🧠📡 Nadziranje in upravljanje Sproten nadzor procesa: temperatura, čas, pretok zraka in načini delovanja – z alarmi in shranjenimi recepti za ponovljive cikle. 🔁✅ 🔥🧩 Grelnim modul Hitro segrevanje in stabilna temperatura zahvaljujoč učinkovitim grelnim elementom in hitremu prenosu energije. ⚡🌡️ 🌀💨 Kroženje zraka Enakomerna porazdelitev zraka zmanjšuje temperaturne razlike za stalno kakovost premaza. 🎯✅ 🧱❄️ Izolacija in konstrukcija Pametna zasnova komore minimalizira toplotne izgube – hitrejše doseganje nastavljene temperature in manjša poraba energije. ♻️📉 🛡️⚠️ Varnost in certifikati Senzorji, medzaporne naprave in zaščitna logika povečajo varnost in zanesljivost delovanja. 🔒👷 ⚡💰 Visoka učinkovitost Optimiziran prenos toplote in manjše izgube pomenijo resnične prihranke pri obratovanju. 📉🔥 ⏰🤖 Samodejni zagon Programabilni urnik – samodejno predgretje pred začetkom izmene za gladek zagon proizvodnje. ⏱️✅ 🚪🔒 Samozapiralna vrata + pametni dimnik Preprečujejo nenamerno odpiranje, dimnik se vklopi le po potrebi za varnejše delovanje. 🧯✅ 🌿🔋 ECO način Nizka poraba energije v stanju pripravljenosti – do 20 % manjša poraba goriva, odvisno od procesa. 🌱📉 👀💡 Pogled in osvetlitev Pregled nad procesom brez odpiranja vrat – manjši padci temperature, lažji nadzor. ✨👁️ 🛤️🔥 Vodila + samodejna kapuca Toplotna kapuca deluje samo med nalaganjem za manjše izgube toplote, samodejno podajanje po tirnicah izboljša ergonomijo in hitrost nalaganja. 🙌⚙️ 🎛️🌡️ VEČCONSKO GRETJE Ledofx Nfmopfx Ac Uehk Neodvisen nadzor con za enakomerno utrjevanje kosov z različno maso in obliko. 🧩✅ 🧠♨️ MTS sistem Grelniki nameščeni brez toplotnih mostov – večja učinkovitost in hitrejše dosežene nastavljene temperature. ⚡⏱️ 2-v-1 🧱↔️🧱 Razdeljena komora Premična pregrada za dve neodvisni coni – sušenje in utrjevanje v eni napravi za maksimalno prilagodljivost. 🚀🔁 🎚️🌀 VFD prezračevanje Spremenljiva hitrost ventilatorja glede na pogoje v komori – boljši nadzor in manjša poraba elektrike. ⚙️💡

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can be moved on the floor or suspended from rails. - For ergonomic solutions in manual installations, we recommend suspended cross conveyors (cross transport). - In automated systems, chain conveyors are most commonly used. These run continuously and are an excellent solution for companies focusing on process quality and repeatability. - For companies producing various products simultaneously—for example, with multiple spray booths in different colors—flexible solutions with non-powered conveyors are used. This is the most expensive solution. All installations are custom-made to meet individual customer specifications. Continuous transport systems for overhead chain conveyors are designed and manufactured based on individual customer orders. In this system, floor conveyors can also be produced to carry items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Cross beams (cross transporters) are specifically designed and manufactured to suit the requirements of individual installations. Use of a photoelectric sensor Lhsdpfxjfz Dube Ac Uok The use of a photoelectric sensor in the detail area enables length measurement and, consequently, allows gun activation when the part enters its range, and immediate deactivation after painting. The photoelectric sensor is standard equipment. Identification of details by means of special markings. Above the hanger, plates with identification holes are present. Based on this, the PLC controller, in conjunction with the photoelectric sensor, identifies the painted part and activates or deactivates the guns at the precise moment—thereby saving energy and powder coating material. Vertical shape recognition. By using light barriers with horizontal detectors, the PLC control can analyze the vertical shape of a part. The PLC controller measures the time a part is expected to be inside the gun zone, allowing the guns to be turned on or off selectively. With light barriers equipped with multiple sensors horizontally and vertically. This solution enables precise measurement of workpiece dimensions and thus also allows control of manipulators.

Leto izdelave: 2020, stanje: novo, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information on Gas and Oil Consumption Oil and gas consumption is calculated based on the burner settings. This function enables you to estimate the consumption and costs for each firing process. USB Storage Each firing process is logged, and the data can be transferred to a USB stick for evaluation on a PC. Each file is automatically generated and refers to a single firing process, recording extreme temperatures and precise timing. Files are saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this feature is free of charge. With other providers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Something not right? Too few pieces after firing? You can now check the exact parameters of each firing process, such as its duration or whether any problems occurred. New! Timer Function Lhjdpfx Acofz Apqe Ujk It is possible to preset the operating start time so that the furnace can automatically switch on before the work shift begins. Made by Professionals for Professionals Automatic Smoke Extractor The smoke extractor can be programmed to open several minutes before the end of the firing process, allowing smoke to be drawn out of the chamber. It can also be controlled directly from the touch panel. Process Duration Timer Using heating dynamics, the system calculates the process duration and displays the end time of the firing process on the display. Self-Closing Doors To open, simply pull the door. To close, just push it—the door will close automatically. Exhaust Hood Over the Door (optional) To minimize heat loss to the hall when opening the door, an exhaust hood can be installed above the door to extract the hot air. Partition Wall (optional) The partition wall is suitable for large furnaces where only parts of the oven are to be used. The furnace is equipped with a movable partition and special controls. 2-in-1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying is done in the second chamber at the same time.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Lhjdsfz A Ilepfx Ac Ujk Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk. Ledpjfzktzefx Ac Ujhk

Leto izdelave: 2025, stanje: novo, Cene sušilnih peči, prikazanih na fotografijah, se razlikujejo glede na velikost, konfiguracijo in dodatno opremo. 💡📏⚙️ V podjetju ROMER izdelujemo tako standardne modele kot popolnoma prilagojene rešitve, zasnovane glede na vaše tehnološke zahteve. 🏭✅ Sporočite nam dimenzije vaših kosov, kapaciteto linije, profil utrjevanja in razpoložljiv prostor – pripravili bomo najboljšo rešitev in možnosti, ki resnično izboljšajo vsakodnevno učinkovitost. 🔥🎯 🧠📡 Nadziranje in upravljanje Sproten nadzor procesa: temperatura, čas, pretok zraka in načini delovanja – z alarmi in shranjenimi recepti za ponovljive cikle. 🔁✅ 🔥🧩 Grelnim modul Hitro segrevanje in stabilna temperatura zahvaljujoč učinkovitim grelnim elementom in hitremu prenosu energije. ⚡🌡️ 🌀💨 Kroženje zraka Enakomerna porazdelitev zraka zmanjšuje temperaturne razlike za stalno kakovost premaza. 🎯✅ 🧱❄️ Izolacija in konstrukcija Pametna zasnova komore minimalizira toplotne izgube – hitrejše doseganje nastavljene temperature in manjša poraba energije. ♻️📉 🛡️⚠️ Varnost in certifikati Senzorji, medzaporne naprave in zaščitna logika povečajo varnost in zanesljivost delovanja. 🔒👷 ⚡💰 Visoka učinkovitost Optimiziran prenos toplote in manjše izgube pomenijo resnične prihranke pri obratovanju. 📉🔥 ⏰🤖 Samodejni zagon Programabilni urnik – samodejno predgretje pred začetkom izmene za gladek zagon proizvodnje. ⏱️✅ 🚪🔒 Samozapiralna vrata + pametni dimnik Preprečujejo nenamerno odpiranje, dimnik se vklopi le po potrebi za varnejše delovanje. 🧯✅ 🌿🔋 ECO način Nizka poraba energije v stanju pripravljenosti – do 20 % manjša poraba goriva, odvisno od procesa. 🌱📉 👀💡 Pogled in osvetlitev Pregled nad procesom brez odpiranja vrat – manjši padci temperature, lažji nadzor. ✨👁️ Ljdefzb Rcspfx Ac Uohk 🛤️🔥 Vodila + samodejna kapuca Toplotna kapuca deluje samo med nalaganjem za manjše izgube toplote, samodejno podajanje po tirnicah izboljša ergonomijo in hitrost nalaganja. 🙌⚙️ 🎛️🌡️ VEČCONSKO GRETJE Neodvisen nadzor con za enakomerno utrjevanje kosov z različno maso in obliko. 🧩✅ 🧠♨️ MTS sistem Grelniki nameščeni brez toplotnih mostov – večja učinkovitost in hitrejše dosežene nastavljene temperature. ⚡⏱️ 2-v-1 🧱↔️🧱 Razdeljena komora Premična pregrada za dve neodvisni coni – sušenje in utrjevanje v eni napravi za maksimalno prilagodljivost. 🚀🔁 🎚️🌀 VFD prezračevanje Spremenljiva hitrost ventilatorja glede na pogoje v komori – boljši nadzor in manjša poraba elektrike. ⚙️💡

Leto izdelave: 2020, stanje: novo, Transport systems Depending on customer requirements, transport systems can either be operated on the floor or suspended from rails. - For convenient solutions in manual systems, we recommend overhead cross-transfer systems (transverse conveyors). - In automated systems, chain conveyors are most commonly used. These operate continuously and present an excellent solution for companies focused on process quality and repeatability. - For companies producing various items simultaneously or operating multiple booths with different colours, flexible solutions utilising non-powered conveyors are employed. This is the most expensive solution. All systems are custom-built according to customer specifications. Continuous hanging chain conveyor systems are designed and manufactured to individual client orders. In this system, it is also possible to implement floor conveyor systems to transport items such as flowerpots or wheels (see photo). ROMER also manufactures suspended transport systems. Cross-traverses (cross transporters) are specifically designed and manufactured for unique installation requirements. Use of a photocell Integrating a photocell in the detail area allows for length measurement and permits the guns to be activated as the part enters their range, and switched off immediately after coating to save energy and powder. The photocell is included as standard. Details can be identified using special markers. Above the hanger, plates with identification holes are installed. Based on this, the PLC controller, together with the photocell, recognises the coated part and switches the guns on and off at precisely the right time—saving energy and powder. Vertical shape detection. By using light barriers with horizontal detectors, the PLC can analyse the vertical profile of a part. The PLC also controls the dwell time of the part in the gun chamber, allowing for selective activation and deactivation of the guns. Light barriers with multiple sensors, both horizontally and vertically, are also available. This facilitates precise measurement of workpiece dimensions, enabling manipulator operation as well. Lhsdpfxsfz Dt Nj Ac Ujk

Leto izdelave: 2020, stanje: novo, Transportni sistemi Lodpfofz I D Dex Ac Uehk Glede na zahteve kupca se lahko transportni sistemi premikajo po tleh ali visijo na stebrih. - Za udobne rešitve za ročne vgradnje priporočamo viseče nosilce (prečni transport). - Za avtomatizirane sisteme se najpogosteje uporabljajo verižni transporterji, ki se ne ustavijo in so odlična rešitev za podjetja, ki se osredotočajo na kakovost in ponovljivost postopka. - Za podjetja, ki hkrati izdelujejo različne predmete in imajo na primer več kabin z različnimi barvami, se uporabljajo prožne rešitve z uporabo brezžičnega transportnega traku. To je najdražja rešitev. Vse inštalacije so narejene po meri, odvisno od zahtev kupca, Sistemi verižnih transportnih vzmetenja - neprekinjeni, so zasnovani in izdelani po naročilu kupca. V tem sistemu je mogoče izdelati tudi spodnje transportne sisteme, na katerih so nameščeni detajli, na primer cvetlični lonci, platišča (fotografija). Podjetje ROMER se ukvarja tudi s proizvodnjo visečih transportnih sistemov. Križni traverzi (križni transporti) so zasnovani in izdelani za posebne naprave Uporaba ene fotocelice Uporaba ene fotocelice v prostoru detajla vam omogoča, da izmerite njegovo dolžino in tako omogočite vklop pištol, ko se detajli pojavijo v njihovem dosegu, in izklop pištol takoj po barvanju detajla. Fotocelica je standardna oprema. Identifikacija podrobnosti s posebnimi markerji. Nad zanko obdelovanca so plošče z identifikacijskimi luknjami. Na njihovi osnovi krmilnik PLC v povezavi s fotocelico prepozna naslikane detajle, ob ustreznem času vklopi in izklopi pištolo - s tem prihrani energijo in prašno lakiranje. Vertikalno zaznavanje oblike dela. Uporaba svetlobnih vrat z detektorji vodoravno omogoča krmilniku PLC, da analizira navpično obliko detajla. Krmilnik PLC šteje čas, v katerem naj se podrobnosti pojavijo v prostoru pištole - zahvaljujoč temu je možno selektivno vklopiti ali izklopiti puško. Uporaba svetlobnih vrat z več senzorji vodoravno in navpično. Ta rešitev omogoča natančno merjenje dimenzij detajla, zahvaljujoč temu pa je mogoče tudi krmiljenje manipulatorjev.

Leto izdelave: 2020, stanje: novo, Transport systems Depending on the customer's requirements, transport systems can either be moved on the floor or suspended from rails. - For user-friendly solutions in manual installations, we recommend suspended cross transfers (transverse transport). - In automated systems, chain conveyors are most commonly used. They operate continuously without stopping and offer an excellent solution for companies focusing on process quality and repeatability. - For companies manufacturing a variety of items simultaneously, such as with multiple booths in different colors, flexible solutions using non-powered conveyors are utilized. This is the most expensive solution. All installations are custom-built according to customer specifications. Continuous transport systems for suspended chains are designed and manufactured based on individual customer orders. In this system, it is also possible to implement floor conveyor systems for arranging items such as flower pots or rims (see photo). ROMER also manufactures suspended transport systems. Cross beams (cross-transfer units) are designed and manufactured to meet the specific requirements of individual installations. Use of a Photoelectric Sensor The use of a photoelectric sensor in the item area allows for length measurement and thus enables the spray guns to be activated when the item enters their range, and switched off immediately after coating. The photoelectric sensor is a standard feature. Identification of items by means of special markers. Above each sling, there are plates with identification holes. Based on this, the PLC controller, in combination with the photoelectric sensor, detects the coated item and activates or deactivates the guns at the correct moment—saving both energy and powder coating material. Vertical shape recognition. By using light barriers with horizontal detectors, the PLC control can analyze the vertical shape of an item. The PLC controller tracks the time the item should appear within the gun zone—enabling selective activation or deactivation of the spray guns. With light barriers featuring multiple horizontal and vertical sensors. This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well. Lhsdpfx Acefz I Edj Ujk

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk. Lhsdpfx Acjfz I Ehs Ujk

Stanje: novo, Leto izdelave: 2025, Cene sušilnih peči, prikazanih na fotografijah, se razlikujejo glede na velikost, konfiguracijo in dodatno opremo. 💡📏⚙️ V podjetju ROMER izdelujemo tako standardne modele kot popolnoma prilagojene rešitve, zasnovane glede na vaše tehnološke zahteve. 🏭✅ Sporočite nam dimenzije vaših kosov, kapaciteto linije, profil utrjevanja in razpoložljiv prostor – pripravili bomo najboljšo rešitev in možnosti, ki resnično izboljšajo vsakodnevno učinkovitost. 🔥🎯 🧠📡 Nadziranje in upravljanje Sproten nadzor procesa: temperatura, čas, pretok zraka in načini delovanja – z alarmi in shranjenimi recepti za ponovljive cikle. 🔁✅ 🔥🧩 Grelnim modul Hitro segrevanje in stabilna temperatura zahvaljujoč učinkovitim grelnim elementom in hitremu prenosu energije. ⚡🌡️ 🌀💨 Kroženje zraka Enakomerna porazdelitev zraka zmanjšuje temperaturne razlike za stalno kakovost premaza. 🎯✅ 🧱❄️ Izolacija in konstrukcija Pametna zasnova komore minimalizira toplotne izgube – hitrejše doseganje nastavljene temperature in manjša poraba energije. ♻️📉 🛡️⚠️ Varnost in certifikati Senzorji, medzaporne naprave in zaščitna logika povečajo varnost in zanesljivost delovanja. 🔒👷 ⚡💰 Visoka učinkovitost Optimiziran prenos toplote in manjše izgube pomenijo resnične prihranke pri obratovanju. 📉🔥 ⏰🤖 Samodejni zagon Programabilni urnik – samodejno predgretje pred začetkom izmene za gladek zagon proizvodnje. ⏱️✅ Lodefzccnspfx Ac Ujhk 🚪🔒 Samozapiralna vrata + pametni dimnik Preprečujejo nenamerno odpiranje, dimnik se vklopi le po potrebi za varnejše delovanje. 🧯✅ 🌿🔋 ECO način Nizka poraba energije v stanju pripravljenosti – do 20 % manjša poraba goriva, odvisno od procesa. 🌱📉 👀💡 Pogled in osvetlitev Pregled nad procesom brez odpiranja vrat – manjši padci temperature, lažji nadzor. ✨👁️ 🛤️🔥 Vodila + samodejna kapuca Toplotna kapuca deluje samo med nalaganjem za manjše izgube toplote, samodejno podajanje po tirnicah izboljša ergonomijo in hitrost nalaganja. 🙌⚙️ 🎛️🌡️ VEČCONSKO GRETJE Neodvisen nadzor con za enakomerno utrjevanje kosov z različno maso in obliko. 🧩✅ 🧠♨️ MTS sistem Grelniki nameščeni brez toplotnih mostov – večja učinkovitost in hitrejše dosežene nastavljene temperature. ⚡⏱️ 2-v-1 🧱↔️🧱 Razdeljena komora Premična pregrada za dve neodvisni coni – sušenje in utrjevanje v eni napravi za maksimalno prilagodljivost. 🚀🔁 🎚️🌀 VFD prezračevanje Spremenljiva hitrost ventilatorja glede na pogoje v komori – boljši nadzor in manjša poraba elektrike. ⚙️💡

Leto izdelave: 2020, stanje: novo, 7-inch Touch Panel The large color touch panel makes parameter input even easier and more convenient. 5 Programs with 50 Steps Each You can program up to 5 heating curves, each with a maximum of 50 steps. This feature is especially useful for complex processes. Information on Gas and Oil Consumption Ledpfjfzkrnjx Ac Uohk Oil and gas consumption is calculated based on the burner settings. This function enables you to estimate the consumption and costs for each firing process. USB Storage Each firing process is logged, and the data can be transferred to a USB stick for evaluation on a PC. Each file is automatically generated and refers to a single firing process, recording extreme temperatures and precise timing. Files are saved in *.csv (Excel spreadsheet) format. For all buyers until the end of 2016, this feature is free of charge. With other providers, this can cost several thousand euros. Storage of the Last 20 Firing Processes Something not right? Too few pieces after firing? You can now check the exact parameters of each firing process, such as its duration or whether any problems occurred. New! Timer Function It is possible to preset the operating start time so that the furnace can automatically switch on before the work shift begins. Made by Professionals for Professionals Automatic Smoke Extractor The smoke extractor can be programmed to open several minutes before the end of the firing process, allowing smoke to be drawn out of the chamber. It can also be controlled directly from the touch panel. Process Duration Timer Using heating dynamics, the system calculates the process duration and displays the end time of the firing process on the display. Self-Closing Doors To open, simply pull the door. To close, just push it—the door will close automatically. Exhaust Hood Over the Door (optional) To minimize heat loss to the hall when opening the door, an exhaust hood can be installed above the door to extract the hot air. Partition Wall (optional) The partition wall is suitable for large furnaces where only parts of the oven are to be used. The furnace is equipped with a movable partition and special controls. 2-in-1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying is done in the second chamber at the same time.

Leto izdelave: 2020, stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Lhodpfx Acofz A Iws Ujk Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.